Investigation of processing parameters of spray freezing into liquid to prepare polyethylene glycol polymeric particles for drug delivery

The objective of this study was to investigate the influence of processing parameters on the morphology, porosity, and crystallinity of polymeric polyethylene glycol (PEG) microparticles by spray freezing into liquid (SFL), a new particle engineering technology. Processing parameters investigated were the viscosity and flow rate of the polymer solution, nozzle diameter, spray time, pressure, temperature, and flow rate of the cryogenic liquid. By varying the processing parameters and feed composition, atomization and heat transfer mechanisms were modified resulting in particles of different size distribution, shape, morphology, density, porosity, and crystallinity. Median particle diameter (M50) varied from 25 μm to 600 μm. Particle shape was spherical or elongated with highly irregular surfaces. Granule density was between 0.5 and 1.5 g/mL. In addition to producing particles of pure polymer, drug particles were encapsulted in polymeric microparticles. The encapsulation efficiency of albuterol sulfate was 96.0% with a drug loading of 2.4%, indicating that SFL is useful for producing polymeric microparticles for drug delivery applications. It was determined that the physicochemical characteristics of model polymeric microparticles composed of PEG could be modified for use as a drug delivery carrier.     

Mixing Time Effects on the Dispersion Performance of Adhesive Mixtures for Inhalation

This paper deals with the effects of mixing time on the homogeneity and dispersion performance of adhesive mixtures for inhalation. Interactions between these effects and the carrier size fraction, the type of drug and the inhalation flow rate were studied. Furthermore, it was examined whether or not changes in the dispersion performance as a result of prolonged mixing can be explained with a balance of three processes that occur during mixing, knowing drug redistribution over the lactose carrier; (de-) agglomeration of the drug (and fine lactose) particles; and compression of the drug particles onto the carrier surface. For this purpose, mixtures containing salmeterol xinafoate or fluticasone propionate were mixed for different periods of time with a fine or coarse crystalline lactose carrier in a Turbula mixer. Drug detachment experiments were performed using a classifier based inhaler at different flow rates. Scanning electron microscopy and laser diffraction techniques were used to measure drug distribution and agglomeration, whereas changes in the apparent solubility were measured as a means to monitor the degree of mechanical stress imparted on the drug particles. No clear trend between mixing time and content uniformity was observed. Quantitative and qualitative interactions between the effect of mixing time on drug detachment and the type of drug, the carrier size fraction and the flow rate were measured, which could be explained with the three processes mentioned. Generally, prolonged mixing caused drug detachment to decrease, with the strongest decline occurring in the first 120 minutes of mixing. For the most cohesive drug (salmeterol) and the coarse carrier, agglomerate formation seemed to dominate the overall effect of mixing time at a low inhalation flow rate, causing drug detachment to increase with prolonged mixing. The optimal mixing time will thus depend on the formulation purpose and the choice for other, interacting variables.     

Preparation and characterizations of self-assembled PEGylated gelatin nanoparticles

The PEGylated gelatin nanoparticles were prepared by self-assembling method and characterized. The gelatin drug carrier was proposed as a targeting drug delivery system with the hypothesis that the gelatin carrier could be degraded by the matrix metalloprotease (MMP) and release the anticancer drug loaded inside carriers around the cancer site. The gelatin nanoparticles proposed in this study were composed of deoxycholic acid (DOCA), monomethoxy polyethylene glycol (MPEG), and gelatin. The carboxyl groups of DOCA and carboxylated MPEG were coupled with amine group of gelatin by dichlorohexylcarbodiimide (DCC) method. One molecule of gelatin coupled with 205 molecules of MPEG and 275 molecules of DOCA. The synthesized gelatin/DOCA/MPEG conjugates (GDM) were ultrasonicated to produce self-assembled nanoparticles. DOCA acted as the hydrophobic core, thereby aggregating gelatin molecules and hydrophilic MPEG chains located at the surface of the nanoparticles. The concentration of GDM, intensity of sonication, sonication time and temperature, all affected to control the particle size in the ultrasonication. The optimum condition was obtained as 1.0 mg/mL of GDM, 28 W for sonication intensity, 3 min of sonication time, and room temperature. The size distribution of particle was found to be 100–1000 nm in this condition. The particles which had a broad size distribution were filtered by 0.2 μm membrane. The product yield of particles having below 200 nm of size was about 30%. After filtration, an average diameter of GDM nanoparticle was 176 nm (155–200 nm).     

Nanoparticulate drug delivery systems for cancer chemotherapy

Nanoparticles (NPs) are, in general, colloidal particles, less than 1000 nm, that can be used for better drug delivery and prepared either by encapsulating the drug within a vesicle and or by dispersing the drug molecules within a matrix. Nanoparticulate drug delivery systems have been extensively studied in recent years for spatial and temporal delivery, especially in tumour and brain targeting. NPs have great promise for better drug delivery as found in both pharmaceutical and clinical research. As a drug carrier, NPs have significant advantages like better bioavailability, systemic stability, high drug loading, long blood circulation time and selective distribution in the organs/tissues with longer half life. The selective targeting of NPs can be achieved by the enhanced permeability and retention effect (EPR-effect), attaching specific ligands, or by making selective distribution due to change of the physiological conditions of specific systems like nature, pH, temperature, etc. It has been observed that drug-loaded NPs can have selective distribution to organs/tissues using different types of and proportions of polymers. The current aim of researchers is to prepare NPs that are long-lived with and that demonstrate the appropriate selective distribution for better therapy and thus improved clinical outcomes. Nanoparticulate drug delivery systems have the potential to deliver a drug to the target site with specificity and to maintain the desired concentration at the site for the intended time without untoward effects. In this review article, the methods for the preparation of NPs, their characterization, biodistribution, and pharmacokinetic characteristics are discussed.     

Nanoparticulate drug delivery systems for cancer chemotherapy

Abstract

Nanoparticles (NPs) are, in general, colloidal particles, less than 1000 nm, that can be used for better drug delivery and prepared either by encapsulating the drug within a vesicle and or by dispersing the drug molecules within a matrix. Nanoparticulate drug delivery systems have been extensively studied in recent years for spatial and temporal delivery, especially in tumour and brain targeting. NPs have great promise for better drug delivery as found in both pharmaceutical and clinical research. As a drug carrier, NPs have significant advantages like better bioavailability, systemic stability, high drug loading, long blood circulation time and selective distribution in the organs/tissues with longer half life. The selective targeting of NPs can be achieved by the enhanced permeability and retention effect (EPR-effect), attaching specific ligands, or by making selective distribution due to change of the physiological conditions of specific systems like nature, pH, temperature, etc. It has been observed that drug-loaded NPs can have selective distribution to organs/tissues using different types of and proportions of polymers. The current aim of researchers is to prepare NPs that are long-lived with and that demonstrate the appropriate selective distribution for better therapy and thus improved clinical outcomes. Nanoparticulate drug delivery systems have the potential to deliver a drug to the target site with specificity and to maintain the desired concentration at the site for the intended time without untoward effects. In this review article, the methods for the preparation of NPs, their characterization, biodistribution, and pharmacokinetic characteristics are discussed.     

Localized functionalization of individual colloidal carriers for cell targeting and imaging

Fabricating drug particles for therapeutic delivery and imaging presents important challenges in the design of the particle surfaces. Drug nanoparticle surfaces are currently functionalized with site-specific targeting ligands, biocompatible polymers, or fluorophore-polymer conjugates for specific imaging. However, if these functionalizations were to be synthesized on the drug carrier in localized, nanoscale regions on the particle surface, new schemes of drug delivery could be realized. Here we describe the use of our particle lithography technique that enables the synthesis of individual colloidal carrier assemblies that can be imaged and targeted to integrin-expressing cells. We show localized adhesion specificity for cells expressing the target integrin followed by receptor-mediated endocytosis. With the addition of localized delivery by adding drug nanoparticles to a specific region on the particle surface, our colloidal carrier assemblies have the potential to target, deliver therapeutic agents to, sense, and image diseased endothelium.     

A New Role of Fine Excipient Materials in Carrier-Based Dry Powder Inhalation Mixtures: Effect on Deagglomeration of Drug Particles During Mixing Revealed

The potential of fine excipient materials to improve the performance of carrier-based dry powder inhalation mixtures is well acknowledged. The mechanisms underlying this potential are, however, open to question till date. Elaborate understanding of these mechanisms is a requisite for rational rather than empirical development of ternary dry powder inhalation mixtures. While effects of fine excipient materials on drug adhesion to and detachment from surfaces of carrier particle have been extensively investigated, effects on other processes, such as carrier–drug mixing, capsule/blister/device filling, or aerosolization in inhaler devices, have received little attention. We investigated the influence of fine excipient materials on the outcome of the carrier–drug mixing process. We studied the dispersibility of micronized fluticasone propionate particles after mixing with α-lactose monohydrate blends comprising different fine particle concentrations. Increasing the fine (D < 10.0 μm) excipient fraction from 1.84 to 8.70% v/v increased the respirable drug fraction in the excipient–drug mixture from 56.42 to 67.80% v/v (p < 0.05). The results suggest that low concentrations of fine excipient particles bind to active sites on and fill deep crevices in coarse carrier particles. As the concentration of fine excipient particles increases beyond that saturating active sites, they fill the spaces between and adhere to the surfaces of coarse carrier particles, creating projections and micropores. They thereby promote deagglomeration of drug particles during carrier–drug mixing. The findings pave the way for a comprehensive understanding of contributions of fine excipient materials to the performance of carrier-based dry powder inhalation mixtures.     

Preparation and Characterization of Highly Porous Direct Compression Carrier Particles with Improved Drug Loading During an Interactive Mixing Process

The aim of this study was to prepare highly porous carrier particles by emulsion solvent evaporation and compare the loading capacity of these beads with two traditional carriers, sugar beads, and microcrystalline cellulose granules during an interactive mixing process. The porous carrier particles were prepared by an emulsion solvent evaporation process using cellulose propionate as a binder, anhydrous dibasic calcium phosphate, and ion exchange resins as a fillers, and polyethylene glycol as a pore inducer. Micronized furosemide or griseofulvin powder was mixed with the same volume of each carrier in an interactive mixing process. The tableting properties, drug loading per unit volume of carrier, content uniformity of the mixtures, and dissolution of the drugs from the mixtures were measured. The results showed that highly porous microcapsules with desirable hardness equivalent to that of sugar beads and MCC granules were successfully prepared. On average the loading capacity of the new carrier was 310% that of sugar beads and 320% that of MCC granules during an interactive mixing process with very good content uniformity. The tableting properties of the microcapsules were equivalent to that of microcrystalline cellulose granules, and the dissolution of the drugs from interactive mixtures prepared with the new carrier was equivalent to that of drug suspensions. This showed that the prepared microcapsule carrier could be used to improve the loading capacity during an interactive mixing and to prepare tablets by direct compression.     

A protein chimera self-assembling unit for drug delivery

In the modern view of selective drug delivery of bioactive molecules, the attention is moving onto the setup of the perfect carrier more than in the optimization of the active compound. In this respect, virus-like particles constitute bioinspired nanodevices with the intrinsic ability to transport a large class of molecules, ranging from smart drugs to small interfering RNAs. In this work, we demonstrate the efficacy of a novel construct obtained by fusing a self-assembling protein from the human Rotavirus A, VP6, with the Small Ubiquitin Modifier domain, which maintains the ability to form nanoparticles and nanotubes and is able to be used as a drug carrier, even without specific targeting epitopes. The high expression and purification yield, combined with low toxicity of the empty particles, clearly indicate a good candidate for future studies of selective drug delivery. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 35: e2769, 2019.     

In vivo liver and lung targeting of adriamycin encapsulated in glutaraldehyde-treated murine erythrocytes

Treatment of adriamycin-loaded erythrocytes from B6D2F1 mice with 0.1% glutaraldehyde produced the following effects: a considerable decrease in the in vitro leakage of the unmodified drug and a selective liver (and, to a lesser extent, lung) uptake of the encapsulated drug (70% of the injected dose) compared to drug leakage from, and tissue distribution of, carrier erythrocytes not treated with glutaraldehyde. The liver vascular bed was not saturated by five daily intravenous injections of 20 microliters of glutaraldehyde-treated erythrocytes, which allows a total dosage of 200 micrograms of the drug (half the LD50 value) to be administered. No appreciable liver damage results from extensive and prolonged uptake of glutaraldehyde-treated carrier erythrocytes. Entrapment of adriamycin within erythrocytes along with glutaraldehyde treatment of the carrier cells seems to be a promising therapeutic strategy against liver (and lung) tumors.     

DNA-collagen complex as a carrier for Ag+ delivery

The possibility of DNA-collagen complex as a drug carrier was investigated. The interaction between DNA and silver ions was proved by CD spectra. The release property of the complex of DNA-Ag+ was measured through turbidity of PBS solution to indicate that silver ions could coordinate with base pairs of DNA, and be released slowly from the complex of DNA-Ag+. Collagen film, collagen-Ag+ film, DNA-collagen film and DNA-collagen-Ag+ film were prepared, and studied through SEM. Particles were found present in DNA-collagen-Ag+ film by SEM. These show that silver ions may be enclosed inside these particles, which led to the slow release of Ag+ to the environments. Two bacteria, Escherichia coli and Staphylococcus aureus, were used to study the antibiotic properties of the complex films. The growth of E. coli and S. aureus could be inhibited by these films. It indicates that DNA-collagen may be a good drug carrier for the drug-controlled release.     

Preparation and In Vitro Aerosol Performance of Spray-Dried Shuang-Huang-Lian Corrugated Particles in Carrier-Based Dry Powder Inhalers

The development of dry powder inhalation (DPI) products of traditional Chinese medicine (TCM) remains to be a challenge due to chemical complexity and batch-to-batch variations in constituent composition. This study was to investigate the feasibility of using spray-dried corrugated particles to improve the aerodynamic performance of a TCM, Shuang-Huang-Lian (SHL), in carrier-based DPI. Particles with different surface roughness were spray-dried by the addition of leucine and concomitant manipulation of spray-drying parameters. The surface roughness was determined by atomic force microscopy, whilst the aerodynamic performance of drug particle–mannitol/lactose blends was evaluated using a next-generation pharmaceutical impactor through a Cyclohaler. Although the emission efficiency for corrugated particle-based DPI was ∼10% lower than that for smooth SHL, the fine particle fractions (FPF_<4.4 μm) of 32.4–36.8% for the former were significantly higher than those of 14.7–16.2% for the latter. In particular, the FPF and fraction of drug detached from the carrier appeared not to be significantly affected by the variation in constituent composition of SHL. This study demonstrates that the use of corrugated particles in carrier-based DPI improved aerosol performance by facilitating drug detachment from the carrier, independent of variation in constituent composition, and such particles were potentially applicable to the development of SHL DPI products.KEY WORDS: dry powder inhaler, Shuang-Huang-Lian, spray-drying, surface roughness, traditional Chinese medicine     

Functional characteristics of LDL particles derived from various LDL-apheresis techniques regarding LDL-drug-complex preparation

Low density lipoproteins (LDL) have the potential to serve as cell specific drug carriers. The LDL may be derived in large quantities from LDL-apheresis procedures. Therefore, LDL particles isolated from the waste of three types of LDL-apheresis were investigated concerning their functional integrity in cell transport tests. LDL particles obtained from dextran sulfate-apheresis (DSA) and heparin extracorporeal lipoprotein precipitation (HELP)-LDL-apheresis are capable of specific internalization into HepG2 cells via the apoB receptor pathway. DSA-LDL-apoB appears to be split into two fragments as judged by SDS gel-polyacrylamide gel electrophoresis without changing transport behavior. Membrane differential filtration (MDF)- and HELP-derived LDL particles showed parallel transport behavior and electrophoretic mobility. Acetylated LDL particles obtained from MDF-LDL-apheresis and from blood donation plasma were transported into P388-macrophages via the scavenger receptor pathway. The results confirm the use of LDL particles from LDL-apheresis as substrates for transformation into drug carriers.     

Human Mitochondrial Transmembrane Metabolite Carriers: Tissue Distribution and Its Implication for Mitochondrial Disorders

Mitochondrial transmembrane carrier deficiencies are a recently discovered group of disorders, belonging to the so-called mitochondriocytopathies. We examined the human tissue distribution of carriers which are involved in the process of oxidative phosphorylation (adenine nucleotide translocator, phosphate carrier, and voltage-dependent anion channel) and some mitochondrial substrate carriers (2-oxoglutarate carrier, carnitine-acylcarnitine carrier, and citrate carrier). The tissue distribution on mRNA level of mitochondrial transport proteins appears to be roughly in correlation with the dependence of these tissues on mitochondrial energy production capacity. In general the main mRNA expression of carriers involved in mitochondrial energy metabolism occurs in skeletal muscle and heart. Expression in liver and pancreas differs between carriers. Expression in brain, placenta, lung, and kidney is lower than in the other tissues. Western and Northern blotting experiments show a comparable HVDAC1 protein and mRNA distribution for the tested tissues. Patient's studies showed that cultured skin fibroblasts may not be a reliable alternative for skeletal muscle in screening for human mitochondrial carrier defects.     

角蛋白载药纳米颗粒的制备及药物可控释放性能研究*

目的:以角蛋白作为药物载体材料,制备智能响应性药物递送系统,研究其药物装载和释放性能。方法:利用去溶剂法制备角蛋白纳米颗粒(KNP),以罗丹明B(RB)和姜黄素(Cur)为亲水性和疏水性模式药物,制备载药KNP。利用钨灯丝扫描电镜(SEM)、动态光散射(DLS)、傅里叶变换红外光谱(FTIR)和药物体外释放实验等对KNP的尺寸、形貌、结构、载药和释药性能进行研究。结果:成功制备出粒径均一、约为300 nm 的KNP,能够装载亲水性和疏水性药物。载药颗粒在体外释放研究中表现出pH和氧化还原双重响应性。结论:利用去溶剂法,简便、安全地制备了分散性良好且具有pH和氧化还原双重响应性释放特性的角蛋白载药纳米颗粒,为角蛋白作为智能响应型药物递送载体的研究和应用提供了参考。     

Evaluation of inverse anaerobic fluidized bed reactor for treating high strength organic wastewater

The aim of this work is to evaluate the feasibility of an inverse fluidized bed reactor for the anaerobic digestion of distillery effluent, with a carrier material that allows low energy requirements for fluidization, providing also a good surface for biomass attachment and development. Inverse fluidization particles having specific gravity less than one are carried out in the reactor. The carrier particles chosen for this study was perlite having specific surface area of 7.010 m2/g and low energy requirements for fluidization. Before starting up the reactor, physical properties of the carrier material were determined. One millimeter diameter perlite particle is found to have a wet specific density of 295 kg/m3. It was used for the treatment of distillery waste and performance studies were carried out for 65 days. Once the down flow anaerobic fluidized bed system reached the steady state, the organic load was increased step wise by reducing hydraulic retention time (HRT) from 2 days to 0.19 day, while maintaining the constant feed of chemical oxygen demand (COD) concentration. Most particles have been covered with a thin biofilm of uniform thickness. This system achieved 84% COD removal at an organic loading rate (OLR) of 35 kg COD/m3/d.     

Transmembrane topography of the mitochondrial phosphate carrier explored by peptide-specific antibodies and enzymatic digestion

Two peptides corresponding to the amino acid sequences 1-10 (N-terminal peptide) and 303-313 (C-terminal peptide) of the bovine heart mitochondrial phosphate carrier have been synthesized. After being coupled to ovalbumin, they were injected into rabbits to raise polyclonal antibodies. The specificity of the generated antibodies was tested by enzyme-linked immunosorbent assay (ELISA) and/or Western blot. Anti-N-terminal antibodies and anti-C-terminal antibodies exclusively reacted with the corresponding terminal peptide, they also reacted with the isolated phosphate carrier as well as with the phosphate carrier protein in mitochondrial lysates. Both anti-N-terminal and anti-C-terminal antibodies bound to freeze-thawed mitochondria, indicating that both termini of the membrane-bound phosphate carrier are exposed to the cytoplasmic side of the inner mitochondrial membrane. These immunological data were complemented with results concerning enzymatic cleavage of the membrane-bound phosphate carrier by carboxypeptidase A and by an arginine-specific endoprotease. Carboxypeptidase A markedly decreased the binding of anti-C-terminal antibodies to phosphate carrier in freeze-thawed mitochondria. Arg-endoprotease cleaved the phosphate carrier in inside-out submitochondrial particles, but not in right-side-out particles, yielding two fragments of similar apparent molecular weight (Mr approximately equal to 14.5K), which were immunodetected only by the anti-N-terminal antiserum, and a fragment of Mr approximately equal to 17K which was detected only by the anti-C-terminal antiserum. It appears, therefore, that Arg-endoprotease cleavage sites of the phosphate carrier are present only at the matrix side of the inner mitochondrial membrane, at Arg-140 and/or Arg-152.(ABSTRACT TRUNCATED AT 250 WORDS)     

Dual fluorescent HPMA copolymers for passive tumor targeting with pH-sensitive drug release: synthesis and characterization of distribution and tumor accumulation in mice by noninvasive multispectral optical imaging

Preclinical in vivo characterization of new polymeric drug conjugate candidates is crucial for understanding the effects of certain chemical modifications on distribution and elimination of these carrier systems, which is the basis for rational drug design. In our study we synthesized dual fluorescent HPMA copolymers of different architectures and molecular weights, containing one fluorescent dye coupled via a stable hydrazide bond functioning as the carrier label and the other one modeling the drug bound to a carrier via a pH-sensitive hydrolytically cleavable hydrazone bond. Thus, it was possible to track the in vivo fate, namely distribution, elimination and tumor accumulation, of the polymer drug carrier and a cleavable model drug simultaneously and noninvasively in nude mice using multispectral optical imaging. We confirmed our in vivo results by more detailed ex vivo characterization (imaging and microscopy) of autopsied organs and tumors. There was no significant difference in relative biodistribution in the body between the 30 KDa linear and 200 KDa star-like polymer, but the star-like polymer circulated much longer. We observed a moderate accumulation of the polymeric carriers in the tumors. The accumulation of the pH-sensitive releasable model drug was even higher compared to the polymer accumulation. Additionally, we were able to follow the long-term in vivo fate and to prove a time-dependent tumor accumulation of HPMA copolymers over several days.     

Development of an immobilized cell reactor for the production of 1,3-propanediol by Citrobacter freundii

Citrobacter freundii DSM 30040 immobilized on modified polyurethane carrier particles PUR 90/16 was used for continuous glycerol fermentation in an anaerobic fixed bed reactor with effluent recycle and pH control (fixed bed loop reactor). The fermentor was run with buffered mineral medium under growth conditions resulting in the permanent renewal of active biomass. The effects of glycerol concentration in the feed, dilution rate (D), pH and temperature (T) were investigated to optimize the process. With 400 mm glycerol in the feed, pH 6.9, T = 36°C and D = 0.5 h^–1 the maximum productivity could be determined as 8.2 g/l per hour of 1,3-propanediol.     

核酸适配体在靶向药物传递中的研究进展

抗癌药物的毒副作用限制了其临床应用,纳米药物载体可实现药物在病灶部位的聚集而不影响正常组织,从而降低药物毒副作用.在药物载体表面修饰靶向配体,以提高药物载体主动靶向进入到细胞的能力,可有效地将药物释放到靶细胞,大大提高药效.核酸适配体(aptamer)作为一种新型的靶向分子,近几年已被运用到靶向药物传递的研究中.本文介绍了几种适配体靶向载药体系,如适配体-药物、适配体-脂质体、适配体-聚合物胶束、适配体-聚合物纳米颗粒、适配体-金属颗粒以及适配体-支化聚合物等载药体系,并对当前研究的热点以及存在的问题和不足进行了评述.