强启动子glaA介导cbhB基因在黑曲霉中的表达

黑曲霉纤维素酶三类不同酶系中,纤维二糖水解酶基因表达处于很低水平,导致纤维素酶总体活力水平不高。为构建黑曲霉纤维素酶高产菌株,采用基因工程方法,全基因合成拼接黑曲霉高表达葡萄糖淀粉酶基因glaA的强启动子片段与纤维二糖水解酶基因cbhB编码区片段,然后将杂合基因克隆到二元载体pCAMBIA1301上,重组质粒通过农杆菌介导转化黑曲霉分生孢子,携带杂合基因的T-DNA片段插入到黑曲霉转化子的染色体上,共筛选到48个具有潮霉素抗性的转化子。纤维素酶活力水平测定结果显示,转化子A3-9的CMC酶活力最高,为野生型黑曲霉菌株的1.31倍;转化子B1-7与A3-6的滤纸酶活力最高,为野生型黑曲霉菌株2.51倍。另外,初步分析了杂合基因在黑曲霉中的表达所需的诱导条件。     

Enhanced cellulose degradation using cellulase-nanosphere complexes

Enzyme catalyzed conversion of plant biomass to sugars is an inherently inefficient process, and one of the major factors limiting economical biofuel production. This is due to the physical barrier presented by polymers in plant cell walls, including semi-crystalline cellulose, to soluble enzyme accessibility. In contrast to the enzymes currently used in industry, bacterial cellulosomes organize cellulases and other proteins in a scaffold structure, and are highly efficient in degrading cellulose. To mimic this clustered assembly of enzymes, we conjugated cellulase obtained from Trichoderma viride to polystyrene nanospheres (cellulase:NS) and tested the hydrolytic activity of this complex on cellulose substrates from purified and natural sources. Cellulase:NS and free cellulase were equally active on soluble carboxymethyl cellulose (CMC); however, the complexed enzyme displayed a higher affinity in its action on microcrystalline cellulose. Similarly, we found that the cellulase:NS complex was more efficient in degrading natural cellulose structures in the thickened walls of cultured wood cells. These results suggest that nanoparticle-bound enzymes can improve catalytic efficiency on physically intractable substrates. We discuss the potential for further enhancement of cellulose degradation by physically clustering combinations of different glycosyl hydrolase enzymes, and applications for using cellulase:NS complexes in biofuel production.     

Product binding varies dramatically between processive and nonprocessive cellulase enzymes

Cellulases hydrolyze β-1,4 glycosidic linkages in cellulose, which are among the most prevalent and stable bonds in Nature. Cellulases comprise many glycoside hydrolase families and exist as processive or nonprocessive enzymes. Product inhibition negatively impacts cellulase action, but experimental measurements of product-binding constants vary significantly, and there is little consensus on the importance of this phenomenon. To provide molecular level insights into cellulase product inhibition, we examine the impact of product binding on processive and nonprocessive cellulases by calculating the binding free energy of cellobiose to the product sites of catalytic domains of processive and nonprocessive enzymes from glycoside hydrolase families 6 and 7. The results suggest that cellobiose binds to processive cellulases much more strongly than nonprocessive cellulases. We also predict that the presence of a cellodextrin bound in the reactant site of the catalytic domain, which is present during enzymatic catalysis, has no effect on product binding in nonprocessive cellulases, whereas it significantly increases product binding to processive cellulases. This difference in product binding correlates with hydrogen bonding between the substrate-side ligand and the cellobiose product in processive cellulase tunnels and the additional stabilization from the longer tunnel-forming loops. The hydrogen bonds between the substrate- and product-side ligands are disrupted by water in nonprocessive cellulase clefts, and the lack of long tunnel-forming loops results in lower affinity of the product ligand. These findings provide new insights into the large discrepancies reported for binding constants for cellulases and suggest that product inhibition will vary significantly based on the amount of productive binding for processive cellulases on cellulose.     

Computational simulations of the Trichoderma reesei cellobiohydrolase I acting on microcrystalline cellulose Iβ: the enzyme-substrate complex

Cellobiohydrolases are the dominant components of the commercially relevant Trichoderma reesei cellulase system. Although natural cellulases can totally hydrolyze crystalline cellulose to soluble sugars, the current enzyme loadings and long digestion times required render these enzymes less than cost effective for biomass conversion processes. It is clear that cellobiohydrolases must be improved via protein engineering to reduce processing costs. To better understand cellobiohydrolase function, new simulations have been conducted using charmm of cellobiohydrolase I (CBH I) from T.reesei interacting with a model segment (cellodextrin) of a cellulose microfibril in which one chain from the substrate has been placed into the active site tunnel mimicking the hypothesized configuration prior to final substrate docking (i.e., the +1 and +2 sites are unoccupied), which is also the structure following a catalytic bond scission. No tendency was found for the protein to dissociate from or translate along the substrate surface during this initial simulation, nor to align with the direction of the cellulose chains. However, a tendency for the decrystallized cellodextrin to partially re-anneal into the cellulose surface hints that the arbitrary starting configuration selected was not ideal.     

Steric course of the hydration of D-gluco-octenitol catalyzed by alpha-glucosidases and by trehalase

Crystalline Aspergillus niger alpha-glucosidase and highly purified preparations of rice alpha-glucosidase II and Trichoderma reesei trehalase were found to catalyze the hydration of [2-(2)H]-D-gluco-octenitol, i.e., (Z)-3,7-anhydro-1,2-dideoxy-[2-2H]-D-gluco-oct-2-enitol, to yield 1,2-dideoxy-[2-2H]-D-gluco-octulose. In each case, the stereochemistry of the reaction was elucidated by examining the newly formed centers of asymmetry at C-2 and C-3 of the hydration product. The C-1 to C-3 fragment of each isolated [2-2H]-D-gluco-octulose product was recovered as [2-2H]propionic acid and identified by its positive optical rotatory dispersion as the S isomer, showing that each enzyme had protonated the octenitol (at C-2) from above its re face. 1H NMR spectra of enzyme/D-gluco-octenitol digests in D2O showed that the alpha-anomer of [2-2H]-D-gluco-octulose was exclusively produced by each alpha-glucosidase, whereas the beta-anomer was formed by action of the trehalase. The trans hydration catalyzed by the alpha-glucosidases was found to be very strongly inhibited by the substrate; the cis hydration reaction catalyzed by the trehalase showed no such inhibition. Special importance is attached to the finding that in hydrating octenitol each enzyme creates a product of the same anomeric form as in hydrolyzing an alpha-D-glucosidic substrate. This result adds substantially to the growing evidence that individual glycosylases create the configuration of their reaction products by a means that is independent of donor substrate configuration, that is, by a means other than "retaining" or "inverting" substrate configuration.     

The processive endoglucanase EngZ is active in crystalline cellulose degradation as a cellulosomal subunit of Clostridium cellulovorans

Clostridium cellulovorans produces an efficient enzyme complex for the degradation of lignocellulosic biomass. In our previous study, we detected and identified protein spots that interacted with a fluorescently labeled cohesin biomarker via two-dimensional gel electrophoresis. One novel, putative cellulosomal protein (referred to as endoglucanase Z) contains a catalytic module from the glycosyl hydrolase family (GH9) and demonstrated higher levels of expression than other cellulosomal cellulases in Avicel-containing cultures. Purified EngZ had optimal activity at pH 7.0, 40°C, and the major hydrolysis product from the cellooligosaccharides was cellobiose. EngZ's specific activity toward crystalline cellulose (Avicel and acid-swollen cellulose) was 10-20-fold higher than other cellulosomal cellulase activities. A large percentage of the reducing ends that were produced by this enzyme from acid-swollen cellulose were released as soluble sugar. EngZ has the capability of reducing the viscosity of Avicel at an intermediate-level between exo- and endo-typing cellulases, suggesting that it is a processive endoglucanase. In conclusion, EngZ was highly expressed in cellulolytic systems and demonstrated processive endoglucanase activity, suggesting that it plays a major role in the hydrolysis of crystalline cellulose and acts as a cellulosomal enzyme in C. cellulovorans.     

Sclerotium rolfsii: Status in cellulase research

Abstract Microbial degradation of native cellulose to glucose is catalysed by cellulases which refers to a group of enzymes acting in concert. The extracellular enzyme systems of Trichoderma reesei, Sporotrichum pulverulentum, Aspergillus niger and Sclerotium rolfsii have been examined more extensively than other microbial sources. The objective of this review is to present a comparative study of the research on cellulase and hemicellulase enzymes from S. rolfsii .     

Fractionation of Aspergillus niger cellulases by combined ion exchange affinity chromatography

Eight chemically modified cellulose supports were tested for their ability to absorb components of the Aspergillus niger cellulase system. At least two of the most effective adsorbents, aminoethyl cellulose and carboxymethyl cellulose, were shown to be useful for the fractionation of cellulases. These supports apparently owe their resolving capacity to both ion exchange and biospecific binding effects; however, the relative importance of each effect is unknown. These observations form the basis for a new cellulase fractionation technique, combined ion exchange-affinity chromatography.     

Identification of tandemly repeated type VI cellulose-binding domains in an endoglucanase from the aerobic soil bacterium Cellvibrio mixtus

Cellulose-binding domains (CBD) play a pivotal role during plant cell wall hydrolysis by cellulases and xylanases from aerobic soil bacteria. Recently we␣have reported the molecular characterisation of a single-domain endoglucanase from Cellvibrio mixtus, suggesting that some cellulases produced by this aerobic bacterium preferentially hydrolyse soluble cellulosic substrates. Here we describe the complete nucleotide sequence of a second cellulase gene, celB, from the soil bacterium C. mixtus. It revealed an open reading frame of 1863 bp that encoded a polypeptide, defined as cellulase B (CelB), with a predicted M _r of 66 039. CelB contained a glycosyl hydrolase family 5 catalytic domain at its N terminus followed by two repeated domains, which exhibited sequence identity with type VI CBD previously found in xylanases. Full-length CelB bound to cellulose while catalytically active truncated cellulase derivatives were unable to bind the polysaccharide, confirming that CelB is a modular enzyme and that the type VI CBD homologues were functional. Analysis of the biochemical properties of CelB revealed that the enzyme hydrolyses a range of cellulosic substrates, although it was unable to depolymerise Avicel. We propose that type VI CBD, usually found in xylanases, provide an additional mechanism by which cellulases can accumulate on the surface of the plant cell wall, although they do not potentiate cellulase activity directly. These results demonstrate that C. mixtus, in common with other aerobic bacteria, is able to produce cellulases that are directed to the hydrolysis of cellulose in its natural environment, the plant cell wall. Received: 6 October 1997 / Received revision: 22 December 1997 / Accepted: 2 January 1998     

Effects of substrate pretreatment and water activity on lipase-catalyzed cellulose acetylation in organic media

Lipase-catalyzed acetylation of cellulose solubilized in the dimethyl sulfoxide/paraformaldehyde organic solvent system was conducted with lipase A12 from Aspergillus niger. The accompanying side cellulase activity of the A. niger lipase partly accounted for the enhanced acetylation mediated by the enzyme, via facilitating the partial degradation of cellulose substrate as evidenced by high-performance size exclusion chromatograph analysis. The enzymatic cellulose acetylation was improved by substrate pretreatment with cellulase or ultrasound by 18 and 14%, respectively, as a result of the reduced substrate molecular size. Additionally, the ultrasound-pretreated cellulose as the starting substrate was beneficial for the cellulose solution preparation due to the increased accessible surface of cellulose as evidenced by its increased sedimentation volume and SEM micrographs. The effect of thermodynamic water activity (aw) on lipase catalytic activity in organic media was also investigated. The maximum acetylation extent (nearly 11 wt %) occurred at aw = 0.52, which was improved by 51% relative to the enzymatic reaction with no control of water activity. The much larger extent to which the lipase-catalyzed cellulose acetylation was enhanced by water activity optimization than by substrate pretreatment further supported the predominant role played by the major lipase activity of the A. niger lipase over its side cellulase activity in catalyzing cellulose ester synthesis in organic media.     

Cellulase Linkers Are Optimized Based on Domain Type and Function: Insights from Sequence Analysis,Biophysical Measurements,and Molecular Simulation

Cellulase enzymes deconstruct cellulose to glucose, and are often comprised of glycosylated linkers connecting glycoside hydrolases (GHs) to carbohydrate-binding modules (CBMs). Although linker modifications can alter cellulase activity, the functional role of linkers beyond domain connectivity remains unknown. Here we investigate cellulase linkers connecting GH Family 6 or 7 catalytic domains to Family 1 or 2 CBMs, from both bacterial and eukaryotic cellulases to identify conserved characteristics potentially related to function. Sequence analysis suggests that the linker lengths between structured domains are optimized based on the GH domain and CBM type, such that linker length may be important for activity. Longer linkers are observed in eukaryotic GH Family 6 cellulases compared to GH Family 7 cellulases. Bacterial GH Family 6 cellulases are found with structured domains in either N to C terminal order, and similar linker lengths suggest there is no effect of domain order on length. O-glycosylation is uniformly distributed across linkers, suggesting that glycans are required along entire linker lengths for proteolysis protection and, as suggested by simulation, for extension. Sequence comparisons show that proline content for bacterial linkers is more than double that observed in eukaryotic linkers, but with fewer putative O-glycan sites, suggesting alternative methods for extension. Conversely, near linker termini where linkers connect to structured domains, O-glycosylation sites are observed less frequently, whereas glycines are more prevalent, suggesting the need for flexibility to achieve proper domain orientations. Putative N-glycosylation sites are quite rare in cellulase linkers, while an N-P motif, which strongly disfavors the attachment of N-glycans, is commonly observed. These results suggest that linkers exhibit features that are likely tailored for optimal function, despite possessing low sequence identity. This study suggests that cellulase linkers may exhibit function in enzyme action, and highlights the need for additional studies to elucidate cellulase linker functions.     

Crystal structure of the cellulase Cel9M enlightens structure/function relationships of the variable catalytic modules in glycoside hydrolases

Cellulases cleave the beta-1.4 glycosidic bond of cellulose. They have been characterized as endo or exo and processive or nonprocessive cellulases according to their action mode on the substrate. Different types of these cellulases may coexist in the same glycoside hydrolase family, which have been classified according to their sequence homology and catalytic mechanism. The bacterium C. celluloyticum produces a set of different cellulases who belong mostly to glycoside hydrolase families 5 and 9. As an adaptation of the organism to different macroscopic substrates organizations and to maximize its cooperative digestion, it is expected that cellulases of these families are active on the various macroscopic organizations of cellulose chains. The nonprocessive cellulase Cel9M is the shortest variant of family 9 cellulases (subgroup 9(C)) which contains only the catalytic module to interact with the substrate. The crystal structures of free native Cel9M and its complex with cellobiose have been solved to 1.8 and 2.0 A resolution, respectively. Other structurally known family 9 cellulases are the nonprocessive endo-cellulase Cel9D from C. thermocellum and the processive endo-cellulase Cel9A from T. fusca, from subgroups 9(B1) and 9(A), respectively, whose catalytic modules are fused to a second domain. These enzymes differ in their activity on substrates with specific macroscopic appearances. The comparison of the catalytic module of Cel9M with the two other known GH family 9 structures may give clues to explain its substrate profile and action mode.     

Recycle of cellulases and the use of lignocellulosic residue for enzyme production after hydrolysis of steam-pretreated aspenwood

Summary Various modes of substrate and enzyme addition were used to hydrolyze a 10% concentration (w/v) of steam-exploded, water-and-alkali extracted aspenwood withTrichoderma harzianum E58 cellulases. Although cellulose conversion was high (94–100%), enzyme recovery was low in all cases. Low enzyme recovery was due to a combination of thermal inactivation and adsorption of the cellulases onto the lignocellulosic residue. Enzyme recycle was not feasible as the activity of the recovered cellulases towards crystalline cellulose was low. However, the residual material from enzyme hydrolysis was a suitable carbon source for cellulase enzyme production byT. harzianum based on enzyme yield and hydrolytic potential. These residues could only be used up to a 1% substrate concentration, since at higher substrate loadings cellulase production was reduced, likely because of lignin inhibitors.     

Incorporation of fungal cellulases in bacterial minicellulosomes yields viable, synergistically acting cellulolytic complexes

Artificial designer minicellulosomes comprise a chimeric scaffoldin that displays an optional cellulose-binding module (CBM) and bacterial cohesins from divergent species which bind strongly to enzymes engineered to bear complementary dockerins. Incorporation of cellulosomal cellulases from Clostridium cellulolyticum into minicellulosomes leads to artificial complexes with enhanced activity on crystalline cellulose, due to enzyme proximity and substrate targeting induced by the scaffoldin-borne CBM. In the present study, a bacterial dockerin was appended to the family 6 fungal cellulase Cel6A, produced by Neocallimastix patriciarum, for subsequent incorporation into minicellulosomes in combination with various cellulosomal cellulases from C. cellulolyticum. The binding of the fungal Cel6A with a bacterial family 5 endoglucanase onto chimeric miniscaffoldins had no impact on their activity toward crystalline cellulose. Replacement of the bacterial family 5 enzyme with homologous endoglucanase Cel5D from N. patriciarum bearing a clostridial dockerin gave similar results. In contrast, enzyme pairs comprising the fungal Cel6A and bacterial family 9 endoglucanases were substantially stimulated (up to 2.6-fold) by complexation on chimeric scaffoldins, compared to the free-enzyme system. Incorporation of enzyme pairs including Cel6A and a processive bacterial cellulase generally induced lower stimulation levels. Enhanced activity on crystalline cellulose appeared to result from either proximity or CBM effects alone but never from both simultaneously, unlike minicellulosomes composed exclusively of bacterial cellulases. The present study is the first demonstration that viable designer minicellulosomes can be produced that include (i) free (noncellulosomal) enzymes, (ii) fungal enzymes combined with bacterial enzymes, and (iii) a type (family 6) of cellulase never known to occur in natural cellulosomes.     

Thermobifida fusca cellulases exhibit limited surface diffusion on bacterial micro‐crystalline cellulose

Elucidation of cellulase–cellulose interactions is key to modeling biomass deconstruction and in understanding the processes that lead to cellulase inactivation. Here, fluorescence recovery after photobleaching and single molecule tracking (SMT) experiments are used to assess the surface diffusion of Thermobifida fusca cellulases on bacterial micro‐crystalline cellulose. Our results show that cellulases exhibit limited surface diffusion when bound to crystalline cellulose and that a large fraction of the cellulases remain immobile even at temperatures optimal for catalysis. A comparison of our experimental results to Monte Carlo (MC) simulations, which use published diffusion coefficients to model cellulase displacements, shows that even those enzymes that are mobile on the cellulose surface exhibit significantly slower diffusive motions than previously reported. In addition, it is observed that the enzymes that show significant displacements exhibit complex, non‐steady surface motions, which suggest that cellulose–bound cellulases exist in molecular states with different diffusive characteristics. These results challenge the notion that cellulases can freely diffuse over cellulose surfaces without catalyzing bond cleavage. Biotechnol. Bioeng. 2013; 110: 47–56. © 2012 Wiley Periodicals, Inc.     

Phototoxicity of protoporphyrin as related to its subcellular localization in mice livers after short-term feeding with griseofulvin.

The substrate specificities of three cellulases and a beta-glucosidase purified from Thermoascus aurantiacus were examined. All three cellulases partially degraded native cellulose. Cellulase I, but not cellulase II and cellulase III, readily hydrolyzed the mixed beta-1,3; beta-1,6-polysaccharides such as carboxymethyl-pachyman, yeast glucan and laminarin. Both cellulase I and the beta-glucosidase degraded xylan, and it is proposed that the xylanase activity is an inherent feature of these two enzymes. Lichenin (beta-1,4; beta-1,3) was degraded by all three cellulases. Cellulase II cannot degrade carboxymethyl-cellulose, and with filter paper as substrate the end product was cellobiose, which indicates that cellulase II is an exo-beta-1,4-glucan cellobiosylhydrolase. Degradation of cellulose (filter paper) can be catalysed independently by each of the three cellulases; there was no synergistic effect between any of the cellulases, and cellobiose was the principal product of degradation. The mode of action of one cellulase (cellulase III) was examined by using reduced cellulodextrins. The central linkages of the cellulodextrins were the preferred points of cleavage, which, with the rapid decrease in viscosity of carboxymethyl-cellulose, confirmed that cellulase III was an endocellulase. The rate of hydrolysis increased with chain length of the reduced cellulodextrins, and these kinetic data indicated that the specificity region of cellulase III was five or six glucose units in length.     

Isolation and primary structure of a cellulase from the Japanese sea urchin Strongylocentrotus nudus

Glycoside-hydrolase-family 9 (GHF9) cellulases are known to be widely distributed in metazoa. These enzymes have been appreciably well investigated in protostome invertebrates such as arthropods, nematodes, and mollusks but have not been characterized in deuterostome invertebrates such as sea squirts and sea urchins. In the present study, we isolated the cellulase from the Japanese purple sea urchin Strongylocentrotus nudus and determined its enzymatic properties and primary structure. The sea urchin enzyme was extracted from the acetone-dried powder of digestive tract of S. nudus and purified by conventional chromatographies. The purified enzyme, which we named SnEG54, showed a molecular mass of 54kDa on SDS-PAGE and exhibited high hydrolytic activity toward carboxymethyl cellulose with an optimum temperature and pH at 35 degrees C and 6.5, respectively. SnEG54 degraded cellulose polymer and cellooligosaccharides larger than cellotriose producing cellotriose and cellobiose but not these small cellooligosaccharides. From a cDNA library of the digestive tract we cloned 1822-bp cDNA encoding the amino-acid sequence of 444 residues of SnEG54. This sequence showed 50-57% identity with the sequences of GHF9 cellulases from abalone, sea squirt, and termite. The amino-acid residues crucial for the catalytic action of GHF9 cellulases are completely conserved in the SnEG54 sequence. An 8-kbp structural gene fragment encoding SnEG54 was amplified by PCR from chromosomal DNA of S. nudus. The positions of five introns are consistent with those in other animal GHF9 cellulase genes. Thus, we confirmed that the sea urchin produces an active GHF9 cellulase closely related to other animal cellulases.     

A long-wavelength fluorescent substrate for continuous fluorometric determination of cellulase activity: resorufin-beta-D-cellobioside

A simple and reliable continuous assay procedure for measurement of cellulase activity from several species using the new substrate resorufin-beta-D-cellobioside (Res-CB) has been developed. The product of enzyme reaction, resorufin, exhibits fluorescence emission at 585 nm with excitation at 571 nm and has a pK(a) of 5.8, which allows continuous measurement of fluorescence turnover at or near physiological pH values. The assay performed using purified cellulase from the microscopic fungus Trichoderma reesei has been shown to give the kinetic parameters K(m) of 112 microM and V(max) of 0.000673 micromol/mL/min. Methods for performing the assay using cellulases isolated from both live Arabidopsis thaliana plant and Aspergillus niger fungal species are presented.     

Incorporation of Fungal Cellulases in Bacterial Minicellulosomes Yields Viable, Synergistically Acting Cellulolytic Complexes

Artificial designer minicellulosomes comprise a chimeric scaffoldin that displays an optional cellulose-binding module (CBM) and bacterial cohesins from divergent species which bind strongly to enzymes engineered to bear complementary dockerins. Incorporation of cellulosomal cellulases from Clostridium cellulolyticum into minicellulosomes leads to artificial complexes with enhanced activity on crystalline cellulose, due to enzyme proximity and substrate targeting induced by the scaffoldin-borne CBM. In the present study, a bacterial dockerin was appended to the family 6 fungal cellulase Cel6A, produced by Neocallimastix patriciarum, for subsequent incorporation into minicellulosomes in combination with various cellulosomal cellulases from C. cellulolyticum. The binding of the fungal Cel6A with a bacterial family 5 endoglucanase onto chimeric miniscaffoldins had no impact on their activity toward crystalline cellulose. Replacement of the bacterial family 5 enzyme with homologous endoglucanase Cel5D from N. patriciarum bearing a clostridial dockerin gave similar results. In contrast, enzyme pairs comprising the fungal Cel6A and bacterial family 9 endoglucanases were substantially stimulated (up to 2.6-fold) by complexation on chimeric scaffoldins, compared to the free-enzyme system. Incorporation of enzyme pairs including Cel6A and a processive bacterial cellulase generally induced lower stimulation levels. Enhanced activity on crystalline cellulose appeared to result from either proximity or CBM effects alone but never from both simultaneously, unlike minicellulosomes composed exclusively of bacterial cellulases. The present study is the first demonstration that viable designer minicellulosomes can be produced that include (i) free (noncellulosomal) enzymes, (ii) fungal enzymes combined with bacterial enzymes, and (iii) a type (family 6) of cellulase never known to occur in natural cellulosomes.