Validation of single nucleotide polymorphism quantification in pooled DNA samples with SNaPIT. A glycosylase-mediated methods for polymorphism detection method

Association studies using genome scans to identify quantitative trait loci for multifactorial disorders, with anything approaching reasonable power, have been compromised by the need for a very dense array of genetic markers and large numbers of affected individuals. These requirements impose enormous burdens on the genotyping capacity for most laboratories. DNA pooling has been proposed as a possible approach to reduce genotyping costs and effort. We report on the application of the SNaPIT™ technology to evaluate allele frequencies in pooled DNA samples and conclude that it offers a cost effective, efficient and accurate estimator and provides several advantages over competing technologies in this regard.     

Quantitative trait locus mapping in dairy cattle by means of selective milk DNA pooling using dinucleotide microsatellite markers: analysis of milk protein percentage.

"Selective DNA pooling" accomplishes quantitative trait locus (QTL) mapping through densitometric estimates of marker allele frequencies in pooled DNA samples of phenotypically extreme individuals. With poly(TG) microsatellites, such estimates are confounded by "shadow" ("stutter") bands. A correction procedure was developed on the basis of an observed linear regression between shadow band intensity and allele TG repeat number. Using this procedure, a selective DNA pooling study with respect to milk protein percentage was implemented in Israel-Holstein dairy cattle. Pools were prepared from milk samples of high and low daughters of each of seven sires and genotyped with respect to 11 markers. Highly significant associations with milk protein percentage were found for 5 of the markers; 4 of these markers confirmed previous reports. Selective DNA pooling accessed 80.6 and 48.3%, respectively, of the information that would have been available through individual selective genotyping or total population genotyping. In effect, the statistical power of 45,600 individual genotypings was obtained from 328 pool genotypings. This methodology can make genome-wide mapping of QTL accessible to moderately sized breeding organizations.     

Interval mapping of quantitative trait loci with selective DNA pooling data

Selective DNA pooling is an efficient method to identify chromosomal regions that harbor quantitative trait loci (QTL) by comparing marker allele frequencies in pooled DNA from phenotypically extreme individuals. Currently used single marker analysis methods can detect linkage of markers to a QTL but do not provide separate estimates of QTL position and effect, nor do they utilize the joint information from multiple markers. In this study, two interval mapping methods for analysis of selective DNA pooling data were developed and evaluated. One was based on least squares regression (LS-pool) and the other on approximate maximum likelihood (ML-pool). Both methods simultaneously utilize information from multiple markers and multiple families and can be applied to different family structures (half-sib, F2 cross and backcross). The results from these two interval mapping methods were compared with results from single marker analysis by simulation. The results indicate that both LS-pool and ML-pool provided greater power to detect the QTL than single marker analysis. They also provide separate estimates of QTL location and effect. With large family sizes, both LS-pool and ML-pool provided similar power and estimates of QTL location and effect as selective genotyping. With small family sizes, however, the LS-pool method resulted in severely biased estimates of QTL location for distal QTL but this bias was reduced with the ML-pool.     

Quantitative determination of allele frequency in pooled DNA by using sequencing method

Quantitative determination of the allele frequency of single-nucleotide polymorphism (SNP) in pooled DNA samples is a promising approach to clarify the relationships between SNPs and diseases. Here, we present such a simple, accurate, and inexpensive method for quantitative determining the allele frequency in pooled DNA samples. Three steps of DNA pooling, PCR amplification and sequencing are involved in this assay. Although direct determination of the allele frequency from the two allele-specific fluorescence intensities is possible, correction for differential response of alleles is important. We explored the effect of differential response of alleles on test statistics and provide a solution to this problem based on heterozygous fluorescence intensities. We demonstrate the accuracy and reliability of this assay on pooled DNA samples with pre-determined allele frequencies from 7.1% to 53.9%. The accuracy of allele frequency measurements is high, with a correlation coefficient of r2 = 0.997 between measured and known frequencies. We believe that by providing a means for SNP genotyping up to hundreds of samples simultaneously, inexpensively, and reproducibly, this method is a powerful strategy for detecting meaningful polymorphic differences in candidate gene association studies.     

Estimation of relative allele frequencies of single-nucleotide polymorphisms in different populations by microarray hybridization of pooled DNA

Single-nucleotide polymorphisms (SNPs) are considered useful polymorphic markers for genetic studies of polygenic traits. A new practical approach to high-throughput genotyping of SNPs in a large number of individuals is needed in association study and other studies on relationships between genes and diseases. We have developed an accurate and high-throughput method for determining the allele frequencies by pooling the DNA samples and applying a DNA microarray hybridization analysis. In this method, the combination of the microarray, DNA pooling, probe pair hybridization, and fluorescent ratio analysis solves the dual problems of parallel multiple sample analysis, and parallel multiplex SNP genotyping for association study. Multiple DNA samples are immobilized on a slide and a single hybridization is performed with a pool of allele-specific oligonucleotide probes. The results of this study show that hybridization of microarray from pooled DNA samples can accurately obtain estimates of absolute allele frequencies in a sample pool. This method can also be used to identify differences in allele frequencies in distinct populations. It is amenable to automation and is suitable for immediate utilization for high-throughput genotyping of SNP.     

Evaluation of DNA pooling for the estimation of microsatellite allele frequencies: a case study using striped bass (Morone saxatilis)

Using striped bass (Morone saxatilis) and six multiplexed microsatellite markers, we evaluated procedures for estimating allele frequencies by pooling DNA from multiple individuals, a method suggested as cost-effective relative to individual genotyping. Using moment-based estimators, we estimated allele frequencies in experimental DNA pools and found that the three primary laboratory steps, DNA quantitation and pooling, PCR amplification, and electrophoresis, accounted for 23, 48, and 29%, respectively, of the technical variance of estimates in pools containing DNA from 2-24 individuals. Exact allele-frequency estimates could be made for pools of sizes 2-8, depending on the locus, by using an integer-valued estimator. Larger pools of size 12 and 24 tended to yield biased estimates; however, replicates of these estimates detected allele frequency differences among pools with different allelic compositions. We also derive an unbiased estimator of Hardy-Weinberg disequilibrium coefficients that uses multiple DNA pools and analyze the cost-efficiency of DNA pooling. DNA pooling yields the most potential cost savings when a large number of loci are employed using a large number of individuals, a situation becoming increasingly common as microsatellite loci are developed in increasing numbers of taxa.     

Kinetic FP-TDI assay for SNP allele frequency determination

Strategies for identifying genetic risk factors in complex diseases by association studies require the comparison of allele frequencies of numerous SNPs between affected and control populations. Theoretically, hundreds of thousands of SNP markers across the genome will have to be genotyped in these studies. Genotyping SNPs one sample at a time is extremely costly and time consuming. To streamline whole genome association studies, some have proposed to screen SNPs by pooling the DNA samples initially for allele frequency determination and perform individual genotyping only when there is a significant discrepancy in allele frequencies between the affected and control populations. Here we describe a new method for determining the allele frequency of SNPs in pooled DNA samples using a two-color primer extension assay with real-time monitoring of fluorescence polarization (named kinetic FP-TDI assay). By comparing the ratio of the rate of incorporation of the two allele-specific dye-terminators, one can calculate the relative amounts of each allele in the pooled sample. The accuracy of allele frequency determination with pooled samples is within 3.3 +/- 0.8% of that determined by genotyping individual samples that make up the pool.     

How to optimize the precision of allele and haplotype frequency estimates using pooled‐sequencing data

Sequencing pools of individuals rather than individuals separately reduces the costs of estimating allele frequencies at many loci in many populations. Theoretical and empirical studies show that sequencing pools comprising a limited number of individuals (typically fewer than 50) provides reliable allele frequency estimates, provided that the DNA pooling and DNA sequencing steps are carefully controlled. Unequal contributions of different individuals to the DNA pool and the mean and variance in sequencing depth both can affect the standard error of allele frequency estimates. To our knowledge, no study separately investigated the effect of these two factors on allele frequency estimates; so that there is currently no method to a priori estimate the relative importance of unequal individual DNA contributions independently of sequencing depth. We develop a new analytical model for allele frequency estimation that explicitly distinguishes these two effects. Our model shows that the DNA pooling variance in a pooled sequencing experiment depends solely on two factors: the number of individuals within the pool and the coefficient of variation of individual DNA contributions to the pool. We present a new method to experimentally estimate this coefficient of variation when planning a pooled sequencing design where samples are either pooled before or after DNA extraction. Using this analytical and experimental framework, we provide guidelines to optimize the design of pooled sequencing experiments. Finally, we sequence replicated pools of inbred lines of the plant Medicago truncatula and show that the predictions from our model generally hold true when estimating the frequency of known multilocus haplotypes using pooled sequencing.     

Empirical evaluation of selective DNA pooling to map QTL in dairy cattle using a half-sib design by comparison to individual genotyping and interval mapping

This study represents the first attempt at an empirical evaluation of the DNA pooling methodology by comparing it to individual genotyping and interval mapping to detect QTL in a dairy half-sib design. The findings indicated that the use of peak heights from the pool electropherograms without correction for stutter (shadow) product and preferential amplification performed as well as corrected estimates of frequencies. However, errors were found to decrease the power of the experiment at every stage of the pooling and analysis. The main sources of errors include technical errors from DNA quantification, pool construction, inconsistent differential amplification, and from the prevalence of sire alleles in the dams. Additionally, interval mapping using individual genotyping gains information from phenotypic differences between individuals in the same pool and from neighbouring markers, which is lost in a DNA pooling design. These errors cause some differences between the markers detected as significant by pooling and those found significant by interval mapping based on individual selective genotyping. Therefore, it is recommended that pooled genotyping only be used as part of an initial screen with significant results to be confirmed by individual genotyping. Strategies for improving the efficiency of the DNA pooling design are also presented.     

Selective genotyping for determination of linkage between a marker locus and a quantitative trait locus

Summary Selective genotyping is the term used when the determination of linkage between marker loci and quantitative trait loci (QTL) affecting some particular trait is carried out by genotyping only individuals from the high and low phenotypic tails of the entire sample population. Selective genotyping can markedly decrease the number of individuals genotyped for a given power at the expense of an increase in the number of individuals phenotyped. The optimum proportion of individuals genotyped from the point of view of minimizing costs for a given experimental power depends strongly on the cost of completely genotyping an individual for all of the markers included in the experiment (including the costs of obtaining a DNA sample) relative to the cost of rearing and trait evaluation of an individual. However, in single trait studies, it will almost never be useful to genotype more than the upper and lower 25% of a population. It is shown that the observed difference in quantitative trait values associated with alternative marker genotypes in the selected population can be much greater than the actual gene effect at the quantitative trait locus when the entire population is considered. An expression and a figure is provided for converting observed differences under selective genotyping to actual gene effects.     

Novel linkage mapping approach using DNA pooling in human and animal genetics. II. Detection of quantitative traits loci in dairy cattle

Selective DNA pooling is an advanced methodology for linkage mapping of quantitative trait loci (QTL) in farm animals. The principle is based on densitometric estimates of marker allele frequency in pooled DNA samples of phenotypically extreme individuals from half-sib, backcross and F(2) experimental designs in farm animals. This methodology provides a rapid and efficient analysis of a large number of individuals with short tandem repeat markers that are essential to detect QTL through the genome - wide searching approach. Several strategies involving whole genome scanning with a high statistical power have been developed for systematic search to detect the quantitative traits loci and linked loci of complex traits. In recent studies, greater success has been achieved in mapping several QTLs in Israel-Holstein cattle using selective DNA pooling. This paper outlines the currently emerged novel strategies of linkage mapping to identify QTL based on selective DNA pooling with more emphasis on its theoretical pre-requisite to detect linked QTLs, applications, a general theory for experimental half-sib designs, the power of statistics and its feasibility to identify genetic markers linked QTL in dairy cattle. The study reveals that the application of selective DNA pooling in dairy cattle can be best exploited in the genome-wide detection of linked loci with small and large QTL effects and applied to a moderately sized half-sib family of about 500 animals.     

Sequential bulked typing: a rapid approach for detecting QTLs

A strategy of DNA pooling aimed at identifying markers linked to quantitative trait loci (QTLs), ‘Sequential Bulked Typing’ (SBT), is presented. The method proposed consists in pooling DNA from consecutive pairs of individuals ranked phenotypically, i.e., pools are formed with individuals ranked (1st, 2nd), (3rd, 4th),…, (N-1st, Nth). The N/2 pools are subsequently amplified using the polymerase chain reaction (PCR). If the whole population is typed the number of PCRs per marker is halved with respect to individual typing (IT). But if this strategy is combined with selective genotyping of extreme individuals savings can be further increased. Two extreme cases are considered: in the first one (SBT⁰), it is assumed that only presence or absence of a given allele can be ascertained in a pool; in the second one (SBT¹), it is further assumed that differences between allele band intensities can be distinguished. The theory to estimate by maximum likelihood the QTL effect and its position with respect to flanking markers is presented. The behaviour of IT and SBT was studied using stochastic computer simulation in backcross and F₂ populations. Three percentages of subpattern distinction (0, 50 and 100%) two population sizes (n=1200 and 600) and two QTL effects (a=0.1 and 0.25 standard deviations) were considered. SBT¹ had the same power as individual genotyping at half the genotyping costs in all situations studied. Accuracy of QTL location is not increased with a dense number of markers, as opposed to individual typing. As a result DNA pooling is not useful for accurate location of the QTL but rather to pick up genome regions containing QTLs of at least moderate effect. The theory developed provides the general theoretical framework to deal with any DNA pooling strategy aimed at detecting QTLs. Received: 15 September 1997 / Accepted: 6 October 1997     

Asymptotic variances of QTL estimators with selective DNA pooling

Investigation on QTL-marker linkage usually requires a great number of observed recombinations, inferred from combined analysis of phenotypes and genotypes. To avoid costly individual genotyping, inferences on QTL position and effects can instead make use of marker allele frequencies. DNA pooling of selected samples makes allele frequency estimation feasible for studies involving large sample sizes. Linkage studies in outbred populations have traditionally exploited half-sib family designs; within the animal production context, half-sibships provide large families that are highly suitable for DNA pooling. Estimators for QTL position and effect have been proposed that make use of information from flanking markers. We present formulas derived by the delta method for the asymptotic variance of these estimators.     

Estimation of single nucleotide polymorphism allele frequency in DNA pools by using Pyrosequencing

Positional cloning of genes underlying complex diseases, such as type 2 diabetes mellitus (T2DM), typically follows a two-tiered process in which a chromosomal region is first identified by genome-wide linkage scanning, followed by association analyses using densely spaced single nucleotide polymorphic markers to identify the causal variant(s). The success of genome-wide single nucleotide polymorphism (SNP) detection has resulted in a vast number of potential markers available for use in the construction of such dense SNP maps. However, the cost of genotyping large numbers of SNPs in appropriately sized samples is nearly prohibitive. We have explored pooled DNA genotyping as a means of identifying differences in allele frequency between pools of individuals with T2DM and unaffected controls by using Pyrosequencing technology. We found that allele frequencies in pooled DNA were strongly correlated with those in individuals (r=0.99, P<0.0001) across a wide range of allele frequencies (0.02-0.50). We further investigated the sensitivity of this method to detect allele frequency differences between contrived pools, also over a wide range of allele frequencies. We found that Pyrosequencing was able to detect an allele frequency difference of less than 2% between pools, indicating that this method may be sensitive enough for use in association studies involving complex diseases where a small difference in allele frequency between cases and controls is expected.     

The efficacy of detecting variants with small effects on the Affymetrix 6.0 platform using pooled DNA

Genome-wide genotyping of a cohort using pools rather than individual samples has long been proposed as a cost-saving alternative for performing genome-wide association (GWA) studies. However, successful disease gene mapping using pooled genotyping has thus far been limited to detecting common variants with large effect sizes, which tend not to exist for many complex common diseases or traits. Therefore, for DNA pooling to be a viable strategy for conducting GWA studies, it is important to determine whether commonly used genome-wide SNP array platforms such as the Affymetrix 6.0 array can reliably detect common variants of small effect sizes using pooled DNA. Taking obesity and age at menarche as examples of human complex traits, we assessed the feasibility of genome-wide genotyping of pooled DNA as a single-stage design for phenotype association. By individually genotyping the top associations identified by pooling, we obtained a 14- to 16-fold enrichment of SNPs nominally associated with the phenotype, but we likely missed the top true associations. In addition, we assessed whether genotyping pooled DNA can serve as an inexpensive screen as the second stage of a multi-stage design with a large number of samples by comparing the most cost-effective 3-stage designs with 80% power to detect common variants with genotypic relative risk of 1.1, with and without pooling. Given the current state of the specific technology we employed and the associated genotyping costs, we showed through simulation that a design involving pooling would be 1.07 times more expensive than a design without pooling. Thus, while a significant amount of information exists within the data from pooled DNA, our analysis does not support genotyping pooled DNA as a means to efficiently identify common variants contributing small effects to phenotypes of interest. While our conclusions were based on the specific technology and study design we employed, the approach presented here will be useful for evaluating the utility of other or future genome-wide genotyping platforms in pooled DNA studies.     

DNA Pooling: a tool for large-scale association studies

DNA pooling is a practical way to reduce the cost of large-scale association studies to identify susceptibility loci for common diseases. Pooling allows allele frequencies in groups of individuals to be measured using far fewer PCR reactions and genotyping assays than are used when genotyping individuals. Here, we discuss recent developments in quantitative genotyping assays and in the design and analysis of pooling studies. Sophisticated pooling designs are being developed that can take account of hidden population stratification, confounders and inter-loci interactions, and that allow the analysis of haplotypes.     

PPC: an algorithm for accurate estimation of SNP allele frequencies in small equimolar pools of DNA using data from high density microarrays

Robust estimation of allele frequencies in pools of DNA has the potential to reduce genotyping costs and/or increase the number of individuals contributing to a study where hundreds of thousands of genetic markers need to be genotyped in very large populations sample sets, such as genome wide association studies. In order to make accurate allele frequency estimations from pooled samples a correction for unequal allele representation must be applied. We have developed the polynomial based probe specific correction (PPC) which is a novel correction algorithm for accurate estimation of allele frequencies in data from high-density microarrays. This algorithm was validated through comparison of allele frequencies from a set of 10 individually genotyped DNA's and frequencies estimated from pools of these 10 DNAs using GeneChip 10K Mapping Xba 131 arrays. Our results demonstrate that when using the PPC to correct for allelic biases the accuracy of the allele frequency estimates increases dramatically.     

Novel linkage mapping approach using DNA pooling in human and animal genetics. I. Detection of complex disease loci

DNA pooling is a potential methodology for genetic loci with small effect contributing to complex diseases and quantitative traits. This is accomplished by the rapid preliminary screening of the genome for the allelic association with the most common class of polymorphic short tandem repeat markers. The methodology assumes as a common founder for the linked disease locus of interest and searches for a region of a chromosome shared between affected individuals. The general theory of DNA pooling basically relies on the observed differences in the allelic distribution between pools from affected and unaffected individuals, including a reduction in the number of alleles in the affected pool, which indicate the sharing of a chromosomal region. The power of statistic for associated linkage mapping can be determined using two recently developed strategies, firstly, by measuring the differences of allelic image patterns produced by two DNA pools of extreme character and secondly, by measuring total allele content differences by comparing between two pools containing large numbers of DNA samples. These strategies have effectively been utilized to identify the shared chromosomal regions for linkage studies and to investigate the candidate disease loci for fine structure gene mapping using allelic association. This paper outlines the utilization of DNA pooling as a potential tool to locate the complex disease loci, statistical methods for accurate estimates of allelic frequencies from DNA pools, its advantages, drawbacks and significance in associate linkage mapping using pooled DNA samples.     

QTL detection with bidirectional and unidirectional selective genotyping: marker-based and trait-based analyses

Selective genotyping of one or both phenotypic extremes of a population can be used to detect linkage between markers and quantitative trait loci (QTL) in situations in which full-population genotyping is too costly or not feasible, or where the objective is to rapidly screen large numbers of potential donors for useful alleles with large effects. Data may be subjected to 'trait-based' analysis, in which marker allele frequencies are compared between classes of progeny defined based on trait values, or to 'marker-based' analysis, in which trait means are compared between progeny classes defined based on marker genotypes. Here, bidirectional and unidirectional selective genotyping were simulated, using population sizes and selection intensities relevant to cereal breeding. Control of Type I error was usually adequate with marker-based analysis of variance or trait-based testing using the normal approximation of the binomial distribution. Bidirectional selective genotyping was more powerful than unidirectional. Trait-based analysis and marker-based analysis of variance were about equally powerful. With genotyping of the best 30 out of 500 lines (6%), a QTL explaining 15% of the phenotypic variance could be detected with a power of 0.8 when tests were conducted at a marker 10 cM from the QTL. With bidirectional selective genotyping, QTL with smaller effects and (or) QTL farther from the nearest marker could be detected. Similar QTL detection approaches were applied to data from a population of 436 recombinant inbred rice lines segregating for a large-effect QTL affecting grain yield under drought stress. That QTL was reliably detected by genotyping as few as 20 selected lines (4.5%). In experimental populations, selective genotyping can reduce costs of QTL detection, allowing larger numbers of potential donors to be screened for useful alleles with effects across different backgrounds. In plant breeding programs, selective genotyping can make it possible to detect QTL using even a limited number of progeny that have been retained after selection.     

Determining SNP allele frequencies in DNA pools

Single nucleotide polymorphisms (SNPs) are among the most common types of polymorphism used for genetic association studies. A method to allow the accurate quantitation of their allele frequencies from DNA pools would both increase throughput and decrease costs for large-scale genotyping. However, to date, most DNA pooling studies have concentrated on the use of microsatellite polymorphisms. In the case of SNPs that are restriction fragment length polymorphisms (RFLPs), studies have tended to use methods for the quantitation of allele frequency from pools that rely on densitometric evaluation of bands on an autoradiograph. Radiation-based methods have well-known drawbacks, and we present two alternative methods for the determination of SNP allele frequencies. For RFLPs, we used agarose gel electrophoresis of digested PCR products with ethidium bromide staining combined with densitometric analysis of gel images on a PC. For all types of SNP, we used allele-specific fluorescent probes in the Taqman assay to determine the relative frequencies of two different alleles. Both methods gave accurate and reproducible results, suggesting they are suitable for use in DNA pooling experiments.