Study of the enzymatic hydrolysis of cellulose for production of fuel ethanol by the simultaneous saccharification and fermentation process

The biochemical conversion of cellulosic biomass to ethanol, a promising alternative fuel, can be carried out efficiently and economically using the simultaneous saccharification and fermentation (SSF) process. The SSF integrates the enzymatic hydrolysis of cellulose to glucose, catalyzed by the synergistic action of cellulase and beta-glucosidase, with the fermentative synthesis of ethanol. Because the enzymatic step determines the ethanol. Because the enzymatic step determines the availability of glucose to the ethanologenic fermentation, the kinetic of cellulose hydrolysis by cellulase and beta-glucosidase and the susceptibility of the two enzymes to inhibition by hydrolysis and fermentation products are of significant importance to the SSF performance and were investigated under realistic SSF conditions. A previously developed SSF mathematical model was used to conceptualize the depolymerization of cellulose. The model was regressed to the collected data to determine the values of the enzyme parameters and was found to satisfactorily predict the kinetics of cellulose hydrolysis. Cellobiose and glucose were identified as the strongest inhibitors of cellulase and beta-glucosidase, respectively. Experimental and modeling results are presented in light of the impact of enzymatic hydrolysis on fuel ethanol production. (c) 1993 Wiley & Sons, Inc.     

Inhibition of cellulose enzymatic hydrolysis by laccase‐derived compounds from phenols

The presence of inhibitors compounds after pretreatment of lignocellulosic materials affects the saccharification and fermentation steps in bioethanol production processes. Even though, external addition of laccases selectively removes the phenolic compounds from lignocellulosic prehydrolysates, when it is coupled to saccharification step, lower hydrolysis yields are attained. Vanillin, syringaldehyde and ferulic acid are phenolic compounds commonly found in wheat‐straw prehydrolysate after steam‐explosion pretreatment. These three phenolic compounds were used in this study to elucidate the inhibitory mechanisms of laccase‐derived compounds after laccase treatment. Reaction products derived from laccase oxidation of vanillin and syringaldehyde showed to be the strongest inhibitors. The presence of these products causes a decrement on enzymatic hydrolysis yield of a model cellulosic substrate (Sigmacell) of 46.6 and 32.6%, respectively at 24 h. Moreover, a decrease in more than 50% of cellulase and β‐glucosidase activities was observed in presence of laccase and vanillin. This effect was attributed to coupling reactions between phenoxyl radicals and enzymes. On the other hand, when the hydrolysis of Sigmacell was performed in presence of prehydrolysate from steam‐exploded wheat straw a significant inhibition on enzymatic hydrolysis was observed independently of laccase treatment. This result pointed out that the other components of wheat‐straw prehydrolysate are affecting the enzymatic hydrolysis to a higher extent than the possible laccase‐derived products. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:700–706, 2015     

Conversion of olive tree biomass into fermentable sugars by dilute acid pretreatment and enzymatic saccharification

The production of fermentable sugars from olive tree biomass was studied by dilute acid pretreatment and further saccharification of the pretreated solid residues. Pretreatment was performed at 0.2%, 0.6%, 1.0% and 1.4% (w/w) sulphuric acid concentrations while temperature was in the range 170-210 degrees C. Attention is paid to sugar recovery both in the liquid fraction issued from pretreatment (prehydrolysate) and that in the water-insoluble solid (WIS). As a maximum, 83% of hemicellulosic sugars in the raw material were recovered in the prehydrolysate obtained at 170 degrees C, 1% sulphuric acid concentration, but the enzyme accessibility of the corresponding pretreated solid was not very high. In turn, the maximum enzymatic hydrolysis yield (76.5%) was attained from a pretreated solid (at 210 degrees C, 1.4% acid concentration) in which cellulose solubilization was detected; moreover, sugar recovery in the prehydrolysate was the poorest one among all the experiments performed. To take account of fermentable sugars generated by pretreatment and the glucose released by enzymatic hydrolysis, an overall sugar yield was calculated. The maximum value (36.3 g sugar/100 g raw material) was obtained when pretreating olive tree biomass at 180 degrees C and 1% sulphuric acid concentration, representing 75% of all sugars in the raw material. Dilute acid pretreatment improves results compared to water pretreatment.     

A novel biochemical route for fuels and chemicals production from cellulosic biomass

The conventional biochemical platform featuring enzymatic hydrolysis involves five key steps: pretreatment, cellulase production, enzymatic hydrolysis, fermentation, and product recovery. Sugars are produced as reactive intermediates for subsequent fermentation to fuels and chemicals. Herein, an alternative biochemical route is proposed. Pretreatment, enzymatic hydrolysis and cellulase production is consolidated into one single step, referred to as consolidated aerobic processing, and sugar aldonates are produced as the reactive intermediates for biofuels production by fermentation. In this study, we demonstrate the viability of consolidation of the enzymatic hydrolysis and cellulase production steps in the new route using Neurospora crassa as the model microorganism and the conversion of cellulose to ethanol as the model system. We intended to prove the two hypotheses: 1) cellulose can be directed to produce cellobionate by reducing β-glucosidase production and by enhancing cellobiose dehydrogenase production; and 2) both of the two hydrolysis products of cellobionate--glucose and gluconate--can be used as carbon sources for ethanol and other chemical production. Our results showed that knocking out multiple copies of β-glucosidase genes led to cellobionate production from cellulose, without jeopardizing the cellulose hydrolysis rate. Simulating cellobiose dehydrogenase over-expression by addition of exogenous cellobiose dehydrogenase led to more cellobionate production. Both of the two hydrolysis products of cellobionate: glucose and gluconate can be used by Escherichia coli KO 11 for efficient ethanol production. They were utilized simultaneously in glucose and gluconate co-fermentation. Gluconate was used even faster than glucose. The results support the viability of the two hypotheses that lay the foundation for the proposed new route.     

Kinetics of cellobiose hydrolysis using cellobiase composites from Ttrichoderma reesei and Aspergillus niger

The enzymatic hydrolysis of cellulose to glucose involves the formation of cellobiose as an intermediate. It has been found necessary(1) to add cellobiase from Aspergillus niger (NOVO) to the cellobiase component of Trichoderma reesei mutant Rut C-30 (Natick) cellulase enzymes in order to obtain after 48 h complete conversion of the cellobiose formed in the enzymatic hydrolysis of biomass. This study of the cellobiase activity of these two enzyme sources was undertaken as a first step in the formation of a kinetic model for cellulose hydrolysis that can be used in process design. In order to cover the full range of cellobiose concentrations, it was necessary to develop separate kinetic parameters for high- and low-concentration ranges of cellobiose for the enzymes from each organism. Competitive glucose inhibition was observed with the enzymes from both organisms. Substrate inhibition was observed only with the A. niger enzymes.     

Enhancement of the enzymatic digestibility of sugarcane bagasse by steam pretreatment impregnated with hydrogen peroxide

Sugarcane bagasse was subjected to steam pretreatment impregnated with hydrogen peroxide. Analyses were performed using 2³ factorial designs and enzymatic hydrolysis was performed at two different solid concentrations and with washed and unwashed material to evaluate the importance of this step for obtaining high cellulose conversion. Similar cellulose conversion were obtained at different conditions of pretreatment and hydrolysis. When the cellulose was hydrolyzed using the pretreated material in the most severe conditions of the experimental design (210°C, 15 min and 1.0% hydrogen peroxide), and using 2% (w/w) water‐insoluble solids (WIS), and 15 FPU/g WIS, the cellulose conversion was 86.9%. In contrast, at a milder pretreatment condition (190°C, 15 min and 0.2% hydrogen peroxide) and industrially more realistic conditions of hydrolysis (10% WIS and 10 FPU/g WIS), the cellulose conversion reached 82.2%. The step of washing the pretreated material was very important to obtain high concentrations of fermentable sugars. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Enzymatic production of ethanol from cellulose using soluble cellulose acetate as an intermediate

A two-stage process for the enzymatic conversion of cellulose to ethanol is proposed as an alternative to currently incomplete and relatively slow enzymatic conversion processes employing natural insoluble cellulose. This alternative approach is designed to promote faster and more complete conversion of cellulose to fermentable sugars through the use of a homogeneous enzymatic hydrolysis reaction. Cellulose is chemically dissolved in the first stage to form water-soluble cellulose acetate (WSCA). The WSCA is then converted to ethanol in a simultaneous saccharification-fermentation with Pestal-otiopsis westerdijkii enzymes (containing cellulolytic and acetyl esterase components) and yeast.Water-soluble cellulose acetate was successfully prepared from purified wood cellulose (Solka Floe) and chemical reagents. Enzyme pretreatment of WSCAto form metabolizable sugars was a necessary step in achieving practical conversion of WSCA to ethanol using yeast. The results showed that WSCA has a low enzyme requirement and a high convertibility to reducing sugars with enzymes from P. westerdijkii fungus. Pestalotiopsis westerdijkii enzymes were found to be superior to enzymes from Trichoderma viride in producing metabolizable glucose from WSCA. The yeast utilized 55-70% of the hydrolyzate sugars that were produced by P. westerrlijkii enzymes on WSCA and produced ethanol. The acetate that was liberated into solution by the action of acetyl esterase enzymes on WSCA was found to have a stimulatory effect on ethanol production in yeast. This is an important feature that can be used to advantage in manipulating the conversion to maximize the production of ethanol. Hence, the simultaneous saccharification-fermentation of WSCA to ethanol using P. westerdijkii enzymes and yeast has features that are highly desirable for developing an economical cellulose conversion process.     

Effect of dilute acid pretreatment on the saccharification and fermentation of rye straw

This research shows the effect of dilute acid pretreatment with various sulfuric acid concentrations (0.5–2.0% [wt/vol]) on enzymatic saccharification and fermentation yield of rye straw. After pretreatment, solids of rye straw were suspended in Na citrate buffer or post-pretreatment liquids (prehydrolysates) containing sugars liberated after hemicellulose hydrolysis. Saccharification was conducted using enzymes dosage of 15 or 25 FPU/g cellulose. Cellulose saccharification rate after rye straw pretreatment was enhanced by performing enzymatic hydrolysis in sodium citrate buffer in comparison with hemicellulose prehydrolysate. The maximum cellulose saccharification rate (69%) was reached in sodium citrate buffer (biomass pretreated with 2.0% [wt/vol] H₂SO₄). Lignocellulosic complex of rye straw after pretreatment was subjected to separate hydrolysis and fermentation (SHF) or separate hydrolysis and co-fermentation (SHCF). The SHF processes conducted in the sodium citrate buffer using monoculture of Saccharomyces cerevisiae (Ethanol Red) were more efficient compared to hemicellulose prehydrolysate in respect with ethanol yields. Maximum fermentation efficiency of SHF processes obtained after rye straw pretreatment at 1.5% [wt/vol] H₂SO₄ and saccharification using enzymes dosage of 25 FPU/g in sodium citrate buffer, achieving 40.6% of theoretical yield. However, SHCF process using cocultures of pentose-fermenting yeast, after pretreatment of raw material at 1.5% [wt/vol] H₂SO₄ and hydrolysis using enzymes dosage of 25 FPU/g, resulted in the highest ethanol yield among studied methods, achieving 9.4 g/L of ethanol, corresponding to 55% of theoretical yield.     

Changes in the enzymatic hydrolysis rate of Avicel cellulose with conversion

The slow down in enzymatic hydrolysis of cellulose with conversion has often been attributed to declining reactivity of the substrate as the more easily reacted material is thought to be consumed preferentially. To better understand the cause of this phenomenon, the enzymatic reaction of the nearly pure cellulose in Avicel was interrupted over the course of nearly complete hydrolysis. Then, the solids were treated with proteinase to degrade the cellulase enzymes remaining on the solid surface, followed by proteinase inhibitors to inactive the proteinase and successive washing with water, 1.0 M NaCl solution, and water. Next, fresh cellulase and buffer were added to the solids to restart hydrolysis. The rate of cellulose hydrolysis, expressed as a percent of substrate remaining at that time, was approximately constant over a wide range of conversions for restart experiments but declined continually with conversion for uninterrupted hydrolysis. Furthermore, the cellulose hydrolysis rate per adsorbed enzyme was approximately constant for the restart procedure but declined with conversion when enzymes were left to react. Thus, the drop off in reaction rate for uninterrupted cellulose digestion by enzymes could not be attributed to changes in substrate reactivity, suggesting that other effects such as enzymes getting "stuck" or otherwise slowing down may be responsible.     

Influence of enzyme loading and physical parameters on the enzymatic hydrolysis of steam-pretreated softwood

Softwood is an interesting raw material for the production of fuel ethanol as a result of its high content of hexoses, and it has attracted attention especially in the Northern hemisphere. However, the enzymatic hydrolysis of softwood is not sufficiently efficient for the complete conversion of cellulose to glucose. Since an improvement in the glucose yield is of great importance for the overall economy of the process, the influence of various parameters on the cellulose conversion of steam-pretreated spruce has been investigated. The addition of beta-glucosidase up to 50 IU g(-)(1) cellulose to the enzymatic hydrolysis process resulted in increased cellulose conversion at a cellulase loading up to 48 FPU g(-)(1) cellulose. Despite very high enzyme loading (120 FPU g(-)(1) cellulose) only about 50% of the cellulose in steam-pretreated spruce was converted to glucose when all of the material following pretreatment was used in the hydrolysis step. The influence of temperature, residence time, and pH were investigated for washed pretreated spruce at a dry matter (DM) content of 5% and a cellulase activity of 18.5 FPU g(-)(1) cellulose. The optimal temperature was found to be dependent on both residence time and pH, and the maximum degree of cellulose conversion, 69.2%, was obtained at 38 degrees C and pH 4.9 for a residence time of 144 h. However, when the substrate concentration was changed from 5% to 2% DM, the cellulose conversion increased to 79.7%. An increase from 5% to 10% DM resulted, however, in a similar degree of cellulose conversion, despite a significant increase in the glucose concentration from 23 g L(-)(1) to 45 g L(-)(1). The deactivation of beta-glucosidase increased with increasing residence time and was more pronounced with vigorous agitation.     

Factors affecting cellulose and hemicellulose hydrolysis of alkali treated brewers spent grain by Fusarium oxysporum enzyme extract

The enzymatic degradation of polysaccharides to monosaccharides is an essential step in bioconversion processes of lignocellulosic materials. Alkali treated brewers spent grain was used as a model substrate for the study of cellulose and hemicellulose hydrolysis by Fusarium oxysporum enzyme extract. The results obtained showed that cellulose and hemicellulose conversions are not affected by the same factors, implementing different strategies for a successful bioconversion. Satisfactory cellulose conversion could be achieved by increasing the enzyme dosage in order to overcome the end-product inhibition, while the complexity of hemicellulose structure imposes the presence of specific enzyme activities in the enzyme mixture used. All the factors investigated were combined in a mathematical model describing and predicting alkali treated brewers spent grain conversion by F. oxysporum enzyme extract.     

Biological pretreatment of cellulose: enhancing enzymatic hydrolysis rate using cellulose-binding domains from cellulases

In this study, cellulose-binding domains (CBDs) of cellulases from Trichoderma reesei were used in a pretreatment step and were found to effectively reduce the crystallinity of cellulose (both Avicel and fibrous cellulose). This, in turn, led to higher glucose concentrations (up to 25% increase) in subsequent hydrolysis of cellulose using a mixture of cellulases and without the need for any intermediate purification step. CBDs were shown to be active in a range of temperatures (up to 50°C), while cellulase hydrolytic activity was greatly reduced after incubation at 50°C. This was explained by retention of full binding capacity after incubation at 50°C for 15 h. Our findings suggest that CBDs may be a valuable tool in pretreating cellulose and eventually afford faster enzymatic conversion of cellulose to glucose, thus contributing to more affordable processes in the production of biofuels.     

Reactor design for minimizing product inhibition during enzymatic lignocellulose hydrolysis: I. Significance and mechanism of cellobiose and glucose inhibition on cellulolytic enzymes

Achievement of efficient enzymatic degradation of cellulose to glucose is one of the main prerequisites and one of the main challenges in the biological conversion of lignocellulosic biomass to liquid fuels and other valuable products. The specific inhibitory interferences by cellobiose and glucose on enzyme-catalyzed cellulose hydrolysis reactions impose significant limitations on the efficiency of lignocellulose conversion — especially at high-biomass dry matter conditions. To provide the base for selecting the optimal reactor conditions, this paper reviews the reaction kinetics, mechanisms, and significance of this product inhibition, notably the cellobiose and glucose inhibition, on enzymatic cellulose hydrolysis. Particular emphasis is put on the distinct complexity of cellulose as a substrate, the multi-enzymatic nature of the cellulolytic degradation, and the particular features of cellulase inhibition mechanisms and kinetics. The data show that new strategies that place the bioreactor design at the center stage are required to alleviate the product inhibition and in turn to enhance the efficiency of enzymatic cellulose hydrolysis. Accomplishment of the enzymatic hydrolysis at medium substrate concentration in separate hydrolysis reactors that allow continuous glucose removal is proposed to be the way forward for obtaining feasible enzymatic degradation in lignocellulose processing.     

Economic impact of total solids loading on enzymatic hydrolysis of dilute acid pretreated corn stover

In process integration studies of the biomass-to-ethanol conversion process, it is necessary to understand how cellulose conversion yields vary as a function of solids and enzyme loading and other key operating variables. The impact of solids loading on enzymatic cellulose hydrolysis of dilute acid pretreated corn stover slurry was determined using an experimental response surface design methodology. From the experimental work, an empirical correlation was obtained that expresses monomeric glucose yield from enzymatic cellulose hydrolysis as a function of solids loading, enzyme loading, and temperature. This correlation was used in a technoeconomic model to study the impact of solids loading on ethanol production economics. The empirical correlation was used to provide a more realistic assessment of process cost by accounting for changes in cellulose conversion yields at different solids and enzyme loadings as well as enzyme cost. As long as enzymatic cellulose conversion drops off at higher total solids loading (due to end-product inhibition or other factors), there is an optimum value for the total solids loading that minimizes the ethanol production cost. The optimum total solids loading shifts to higher values as enzyme cost decreases.     

Pulp properties and their influence on enzymatic degradability

Endoglucanase treatment of pulp for the adjustment of viscosity and the increase in pulp reactivity is a promising step in the concept for the beneficial production of dissolving pulps from paper grade pulps. To promote the commercial applicability of these enzymes, the influence of pulp properties such as carbohydrate composition, pulp type and cellulose morphology on the enzymatic degradability of a pulp was examined. High contents of hemicelluloses and lignin were shown to impair the accessibility of the cellulose to the enzymes. Due to the elevated swelling capacity of cellulose II, conversion of the cellulose morphology from I to II upon alkaline treatments showed a large increasing effect on the cellulose accessibility, and enzymatic degradability. Reactivity measurements of softwood sulfite pulps after enzymatic degradation and acid-catalyzed hydrolysis, respectively, revealed elevated reactivity for the pulp after acid treatment. This is in contrast to effects of enzyme treatments reported for CCE treated kraft pulps.     

Real‐time detection of the morphological change in cellulose by a nanomechanical sensor

Up to now, experimental limitations have prevented researchers from achieving the molecular‐level understanding for the initial steps of the enzymatic hydrolysis of cellulose, where cellulase breaks down the crystal structure on the surface region of cellulose and exposes cellulose chains for the subsequent hydrolysis by cellulase. Because one of these non‐hydrolytic enzymatic steps could be the rate‐limiting step for the entire enzymatic hydrolysis of crystalline cellulose by cellulase, being able to analyze and understand these steps is instrumental in uncovering novel leads for improving the efficiency of cellulase. In this communication, we report an innovative application of the microcantilever technique for a real‐time assessment of the morphological change of cellulose induced by a treatment of sodium chloride. This sensitive nanomechanical approach to define changes in surface structure of cellulose has the potential to permit a real‐time assessment of the effect of the non‐hydrolytic activities of cellulase on cellulose and thereby to provide a comprehensive understanding of the initial steps of the enzymatic hydrolysis of cellulose. Biotechnol. Bioeng. 2010;107: 190–194. © 2010 Wiley Periodicals, Inc.     

Evaluation of organosolv processes for the fractionation and modification of corn stover for bioconversion

Corn stover was pretreated for compositional fractionation and structural modification for maximum conversion of carbohydrate to soluble sugars. The process scheme consisted of three steps: (1) mild prehydrolysis in dilute sulfuric acid, (2) delignification with various organosolv solvents, and (3) enzymatic hydrolysis in an agitated bead reactor. Prehydrolysis of corn stover can be achieved at temperatures ranging from 95 to 120 degrees C, which is a much milder condition than must be applied to wood. Various organosolv solvents, including several alcohols with acid as catalyst, ethylene glycol, and its derivatives, and amines were used for delignification of the prehydrolyzed corn stover. Aromatic alcohols were found to be more effective in solubilizing the prehydrolyzed corn stover than were the aliphatic alcohols. Butanol was the most effective among the aliphatic alcohols; on the other hand, phenol was the best among the aromatic alcohols. Ethylene glycol, methylcellosolv, and ethylcellosolv were effective in solubilizing the prehydrolyzed corn stover but not for enhancing the enzymatic hydrolysis. Various amines achieved delignification at the mild temperature of 95 degrees C, but they tended to solubilize substantial amounts of carbohydrate in addition to lignin. n-Butylamine was effective in enhancing the conversion during enzymatic hydrolysis; it was a good delignifying agent as well as one that achieved a concomitant swelling of the cellulose structure. The low enzymic conversion (20-37%) of prehydrolyzed and solvent-extracted corn stover that was achieved implies that lignin is not the only major barrier for enzymatic hydrolysis. Modification of cellulose structure also should be accomplished to achieve a high degree of conversion. Enzymatic hydrolysis in the agitated bead system increased the rate and extent of conversion of corn stover substantially compared to systems without beads.     

Enhanced rates of enzymatic saccharification and catalytic synthesis of biofuel substrates in gelatinized cellulose generated by trifluoroacetic acid

Background

The crystallinity of cellulose is a principal factor limiting the efficient hydrolysis of biomass to fermentable sugars or direct catalytic conversion to biofuel components. We evaluated the impact of TFA-induced gelatinization of crystalline cellulose on enhancement of enzymatic digestion and catalytic conversion to biofuel substrates.

Results

Low-temperature swelling of cotton linter cellulose in TFA at subzero temperatures followed by gentle heating to 55 °C dissolves the microfibril structure and forms composites of crystalline and amorphous gels upon addition of ethanol. The extent of gelatinization of crystalline cellulose was determined by reduction of birefringence in darkfield microscopy, loss of X-ray diffractability, and loss of resistance to acid hydrolysis. Upon freeze-drying, an additional degree of crystallinity returned as mostly cellulose II. Both enzymatic digestion with a commercial cellulase cocktail and maleic acid/AlCl₃-catalyzed conversion to 5-hydroxymethylfurfural and levulinic acid were markedly enhanced with the low-temperature swollen cellulose. Only small improvements in rates and extent of hydrolysis and catalytic conversion were achieved upon heating to fully dissolve cellulose.

Conclusions

Low-temperature swelling of cellulose in TFA substantially reduces recalcitrance of crystalline cellulose to both enzymatic digestion and catalytic conversion. In a closed system to prevent loss of fluorohydrocarbons, the relative ease of recovery and regeneration of TFA by distillation makes it a potentially useful agent in large-scale deconstruction of biomass, not only for enzymatic depolymerization but also for enhancing rates of catalytic conversion to biofuel components and useful bio-products.

     

The effects of four different pretreatments on enzymatic hydrolysis of sweet sorghum bagasse

Four pretreatment processes including ionic liquids, steam explosion, lime, and dilute acid were used for enzymatic hydrolysis of sweet sorghum bagasse. Compared with the other three pretreatment approaches, steam-explosion pretreatment showed the greatest improvement on enzymatic hydrolysis of the bagasse. The maximum conversion of cellulose and the concentration of glucose obtained from enzymatic hydrolysis of steam explosion bagasse reached 70% and 25 g/L, respectively, which were both 2.5 times higher than those of the control (27% and 11 g/L). The results based on the analysis of SEM photos, FTIR, XRD and NMR detection suggested that both the reduction of crystallite size of cellulose and cellulose degradation from the Iα and Iβ to the Fibril surface cellulose and amorphous cellulose were critical for enzymatic hydrolysis. These pretreatments disrupted the crystal structure of cellulose and increased the available surface area, which made the cellulose better accessible for enzymatic hydrolysis.     

Kinetics of the enzymatic hydrolysis of cellulose: 2. A mathematical model for the process in a plug-flow column reactor

The kinetics of enzymatic cellulose hydrolysis in a plug-flow column reactor catalysed by cellulases [see 1,4-(1,3;1,4)-β-d-glucan 4-glucanohydrolase, EC 3.2.1.4] from Trichoderma longibrachiatum adsorbed on cellulose surface have been studied. The maximum substrate conversion achieved was 90–94%. The possibility of enzyme recovery for a reactor of this type is discussed. A mathematical model for enzymatic cellulose hydrolysis in a plug-flow column reactor has been developed. The model allows for the component composition of the cellulase complex, adsorption of cellulases on the substrate surface, inhibition by reaction products, changes in cellulose reactivity and the inactivation of enzymes in the course of hydrolysis. The model affords a reliable prediction of the kinetics of d-glucose and cellobiose formation from cellulose in a column reactor as well as the degree of substrate conversion and reactor productivity with various amounts of adsorbed enzymes and at various flow rates.