Controlled antibody immobilization onto immunoanalytical platforms by synthetic peptide

Antibody immobilization on a solid surface is inevitable in the preparation of immunochips/sensors. Antibody-binding proteins such as proteins A and G have been extensively employed to capture antibodies on sensor surfaces with right orientations, maintaining their full functionality. Because of their synthetic versatility and stability, in general, small molecules have more advantages than proteins. Nevertheless, no small molecule has been used for oriented and specific antibody immobilization. Here is described a novel strategy to immobilize an antibody on various sensor surfaces by using a small antibody-binding peptide. The peptide binds specifically to the Fc domain of immunoglobulin G (IgG) and, therefore, affords a properly oriented antibody surface. Surface plasmon resonance analysis indicated that a peptide linked to a gold chip surface through a hydrophilic linker efficiently captured human and rabbit IgGs. Moreover, antibodies captured by the peptide exhibited higher antigen binding capacity compared with randomly immobilized antibodies. Peptide-mediated antibody immobilization was successfully applied on the surfaces of biosensor substrates such as magnetic particles and glass slides. The antibody-binding peptide conjugate introduced in this work is the first small molecule linker that offers a highly stable and specific surface platform for antibody immobilization in immunoassays.     

3D antibody immobilization on a planar matrix surface

The amount of active capture antibodies immobilized per unit square is crucial to developing effective antibody chips, biosensors, immunoassays and other molecular recognition technologies. In this study, we present a novel yet simple method for oriented antibody immobilization at high density based on the formation of an orderly, organized aggregation of immunoglobulin G (IgG) and staphylococcal protein A (SPA). Following the chelation of His-tag with Ni(2+), antibodies were immobilized on a solid surface in a three-dimensional (3D) manner and exposed the analyte receptor sites well, which resulted in a substantial enhancement of the analytical signal with more than 64-fold increase in detection sensitivity. Pull-down assays confirmed that IgG antibody can only bind to Ni(2+) matrix indirectly via a SPA linkage, where the His-tag is responsible for binding Ni(2+) and homologous domains are responsible for binding IgG Fc. The immobilization approach proposed here may be an attractive strategy for the construction of high performance antibody arrays and biosensors as long as the antibody probe is of mammalian IgG.     

Immobilization of immunoglobulin-G-binding domain of Protein A on a gold surface modified with biotin ligase

Protein A from Staphylococcus aureus specifically binds to the Fc region of immunoglobulin G (IgG) and is widely used as a scaffold for the immobilization of IgG antibodies on solid supports. It is known that the oriented immobilization of Protein A on solid supports enhances its antibody-binding capability in comparison with immobilization in a random manner. In the current work, we developed a novel method for the oriented immobilization of the IgG-binding domain of Protein A based on the biotinylation reaction from archaeon Sulfolobus tokodaii. Biotinylation from S. tokodaii has a unique property in that the enzyme, biotin protein ligase (BPL), forms a stable complex with its biotinylated substrate protein, biotin carboxyl carrier protein (BCCP). Here, BCCP was fused to the IgG-binding domain of Protein A, and the resulting fusion protein was immobilized on the BPL-modified gold surface of the sensor chip for quartz crystal microbalance through complexation between BCCP and BPL. The layer of the IgG-binding domain prepared in this way successfully captured the antibody, and the captured antibody retained high antigen-binding capability.     

Comparison of antibody functionality using different immobilization methods

This study investigates the influence of antibody immobilization methods on antigen capture. Adsorption and two surface chemistries, an aminosilane chemistry and a common heterobifunctional crosslinker (N-gamma-maleimidobutyryloxy-succinimide ester, GMBS), were compared and evaluated for their ability to immobilize antibodies and capture antigen. The role of protein A as an orienting protein scaffold component in each of these techniques was also evaluated. Through experimentation it was determined that the GMBS technique immobilized the highest amount of antibody and minimized nonspecific binding. For all techniques, the most functional antibodies were found to be those immobilized with protein A. Interestingly, the aminosilane technique demonstrated the highest antigen capture with antibody alone but also exhibited the highest level of nonspecific binding.     

Optimizing immobilization on two-dimensional carboxyl surface: pH dependence of antibody orientation and antigen binding capacity

The performance of immunosensors is highly dependent on the amount of immobilized antibodies and their remaining antigen binding capacity. In this work, a method for immobilization of antibodies on a two-dimensional carboxyl surface has been optimized using quartz crystal microbalance biosensors. We show that successful immobilization is highly dependent on surface pK_a, antibody pI, and pH of immobilization buffer. By the use of EDC/sulfo-NHS (1-ethyl-3-[3-dimethylaminopropyl] carbodiimide hydrochloride/N-hydroxysulfosuccinimide) activation reagents, the effect of the intrinsic surface pK_a is avoided and immobilization at very low pH is therefore possible, and this is important for immobilization of acidic proteins. Antigen binding capacity as a function of immobilization pH was studied. In most cases, the antigen binding capacity followed the immobilization response. However, the antigen-to-antibody binding ratio differed between the antibodies investigated, and for one of the antibodies the antigen binding capacity was significantly lower than expected from immobilization in a certain pH range. Tests with anti-Fc and anti-Fab₂ antibodies on different antibody surfaces indicated that the orientation of the antibodies on the surface had a profound effect on the antigen binding capacity of the immobilized antibodies.     

链球菌G蛋白IgG结合域（GBx）的融合表达及其IgG结合活性的比较分析

链球菌G蛋白的IgG结合域能够特异性地结合IgG 的Fc区,是制备免疫微阵列的一种理想的IgG固定材料。克隆表达了具有IgG结合活性的3种IgG结合域的GST融合蛋白（GST-GBx）,该3种蛋白分别含有1个、2个和3个IgG结合域。采用ELISA对三蛋白IgG结合能力进行了比较分析。结果表明在含B-Domain的量相同的情况下,GST-GB3蛋白固定IgG的量最多,其次为GST-GB2,GST-GB1最弱;对IgG的灵敏度也是GST-GB3最强,GST-GB1最弱,提示GST-GB3固定IgG的能力较其他两蛋白具有明显优势。     

Preparing a highly specific inert immunomolecular-magnetic beads for rapid detection and separation of <Emphasis Type="Italic">S. aureus</Emphasis> and group G <Emphasis Type="Italic">Streptococcus</Emphasis>

The rapid detection and separation of Staphylococcus aureus and group G Streptococcus was based on the affinity chromatography interactions between Fc fragment of human IgG and protein A/G (located on the cell wall of S. aureus and group G Streptococcus). In this case, immobilization of antibodies had to take place in a different and complementary way than in the case of conventional immunosensors. In this study, three different kinds of immunomolecular-magnetic beads (IMB) were prepared for rapid detection and separation of S. aureus and group G Streptococcus (GGS). The Fc regions of the immobilized antibodies were fully accessible to adsorb protein A or protein G. On the contrary, conventional immunosensors had to have fully accessible Fab regions to facilitate the antigen–antibody recognition. It was suggested that the worse method of immobilization of the antibodies for conventional use would yield the better results for this specific use. In this study, we also perfectly solved the nonspecific adsorptions and interaction problems, which were the most serious critical problems for all kinds of sensors. It was achieved by blocking the excess surface groups of aldehyde IMB and the Fab region of the immobilized antibodies with aldehyde-dextran.     

Direct immobilization of gangliosides onto gold-carboxymethyldextran sensor surfaces by hydrophobic interaction: applications to antibody characterization

We describe a novel immobilization technique to investigate interactions between immobilized gangliosides (GD3, GM1, and GM2) and their respective antibodies, antibody fragments, or binding partners using an optical biosensor. Immobilization was performed by direct injection onto a carboxymethyldextran sensor chip and did not require derivatization of the sensor surface or the ganglioside. The ganglioside appeared to bind to the sensor surface by hydrophobic interaction, leaving the carbohydrate epitope available for antibody or, in the case of GM1, cholera toxin binding. The carboxyl group of the dextran chains on the sensor surface did not appear to be involved in the immobilization as evidenced by equivalent levels of immobilization following conversion of the carboxyl groups into acyl amino esters, but rather the dextran layer provided a hydrophilic coverage of the sensor chip which was essential to prevent nonspecific binding. This technique gave better reactivity and specificity for anti- ganglioside monoclonal antibodies (anti-GD3: KM871, KM641, R24; and anti-GM2: KM966) than immobilization by hydrophobic interaction onto a gold sensor surface or photoactivated cross-linking onto carboxymethydextran. This rapid immobilization procedure has facilitated detailed kinetic analysis of ganglioside/antibody interactions, with the surface remaining viable for a large number of cycles (>125). Kinetic constants were determined from the biosensor data using linear regression, nonlinear least squares and equilibrium analysis. The values of kd, ka, and KAobtained by nonlinear analysis (KAKM871 = 1.05, KM641 = 1.66, R24 = 0.14, and KM966 = 0.65 x 10(7) M- 1) were essentially independent of concentration and showed good agreement with data obtained by other analytical methods.      

Affinity immobilization of a genetically engineered bifunctional hybrid protein.

Protein A from Staphylococcus aureus (SpA) is a receptor for the Fc domain of several classes of antibodies including immunoglobin G (IgG). A hybrid protein consisting of protein A and the enzyme beta-lactamase has been constructed using recombinant DNA techniques. The functional characteristics of the hybrid protein adsorbed on IgG-coated Sepharose matrices were studied in detail and compared to those of (i) the hybrid protein in solution and (ii) beta-lactamase covalently immobilized on CNBr-activated Sepharose. Protein A--beta-lactamase bound tightly and specifically to IgG-Sepharose and could be stored for at least 4 weeks without dissociation. The rate of penicillin G hydrolysis by the beta-lactamase domain of the immobilized hybrid protein was found to depend on the amount of IgG covalently coupled to the support. For all IgG loads, higher specific activities and lower Km values relative to covalently immobilized beta-lactamase were obtained. Adsorption of the hybrid protein on the support resulted in increased stability to thermal deactivation. These results indicate that bifunctional hybrid proteins can be useful for the affinity immobilization of enzymes.     

Atomic force spectroscopy-based study of antibody pesticide interactions for characterization of immunosensor surface

Development of immunobiosensor detector surfaces involves the immobilization of active antibodies on the capture surface without any significant loss of antigen binding activity. An atomic force microscope (AFM) was used to directly evaluate specific interactions between pesticides and antibodies on a biosensor surface. Oriented immobilization of antibodies against two herbicide molecules 2,4-dichlorophenoxyacetic acid (2,4-D) and atrazine, on gold, was carried out to create the active immunobiosensor surfaces. The adhesive forces between immobilized antibodies and their respective antigens were measured by force spectroscopy using hapten-carrier protein functionalized AFM cantilevers. Relative functional affinity (avidity) measurements of the antibodies carried out prior to immobilization, well correlated with subsequent AFM force measurement observations. Analysis showed that immobilization had not compromised the reactivity of the surface immobilized antibody molecules for antigen nor was there any change in their relative quality with respect to each other. The utility of the immunoreactive surface was further confirmed using a Surface Plasmon Resonance (SPR) based detection system. Our study indicates that AFM can be utilized as a convenient immunobiosensing tool for confirming the presence and also assessing the strength of antibody-hapten interactions on biosensor surfaces under development.     

Polymer nanoparticles covered with phosphorylcholine groups and immobilized with antibody for high-affinity separation of proteins

Novel polymer nanoparticles were prepared for the selective capture of a specific protein from a mixture with high effectiveness. The nanoparticle surface was covered with hydrophilic phosphorylcholine groups and active ester groups for easy immobilization of antibodies. Phospholipid polymers (PMBN) composed of 2-methacryloyloxyethyl phosphorylcholine, n-butyl methacrylate, and p-nitrophenyloxycarbonyl polyethyleneglycol methacrylate, were synthesized for the surface modification of poly( l-lactic acid) nanoparticles. Surface analysis of the nanoparticles using laser-Doppler electrophoresis and X-ray photoelectron spectroscopy revealed that the surface of nanoparticles was covered with PMBN. Protein adsorption was evaluated with regard to the nonspecific adsorption on the nanoparticles that was effectively suppressed by the phosphorylcholine groups. The immobilization of antibodies on nanoparticles was carried out under physiological conditions to ensure specific binding of antigens. The antibody immobilized on the nanoparticles exhibited high activity and strong affinity for the antigen similar to that exhibited by an antibody in a solution. The selective binding of a specific protein as an antigen from a protein mixture was relatively high compared to that observed with conventional antibody-immobilized polymer nanoparticles. In conclusion, nanoparticles having both phosphorylcholine and active ester groups for antibody immobilization have strong potential for use in highly selective separation based on the biological affinities between biomolecules.     

Functional optimization of agonistic antibodies to OX40 receptor with novel Fc mutations to promote antibody multimerization

Immunostimulatory receptors belonging to the tumor necrosis factor receptor (TNFR) superfamily are emerging as promising targets for cancer immunotherapies. To optimize the agonism of therapeutic antibodies to these receptors, Fc engineering of antibodies was applied to facilitate the clustering of cell surface TNFRs to activate downstream signaling pathways. One engineering strategy is to identify Fc mutations that facilitate antibody multimerization on the cell surface directly. From the analyses of the crystal packing of IgG1 structures, we identified a novel set of Fc mutations, T437R and K248E, that facilitated antibody multimerization upon binding to antigens on cell surface. In a NF-κB reporter assay, the engineered T437R/K248E mutations could facilitate enhanced agonism of an anti-OX40 antibody without the dependence on FcγRIIB crosslinking. Nonetheless, the presence of cells expressing FcγRIIB could facilitate a boost of the agonism of the engineered antibody with mutations on IgG1 Fc, but not on the silent IgG2σ Fc. The Fc engineered antibody also showed enhanced effector functions, including antibody-dependent cell-meditated cytotoxicity, antibody-dependent cellular phagocytosis, and complement-dependent cytotoxicity, depending on the IgG subtypes. Also, the engineered antibodies showed normal FcRn binding and pharmacokinetic profiles in mice. In summary, this study elucidated a novel Fc engineering approach to promote antibody multimerization on a cell surface, which could enhance agonism and improve effector function for anti-TNFR antibodies as well as other therapeutic antibodies.     

Study on orientation of immunoglobulin G on protein G layer

A comparative study of immunoglobulin G (IgG) immobilization was performed, both on a thiolated protein G layer, where this immobilization was due to affinity binding with an Fc fragment of IgG, and on 11-mercaptoundecanoic acid (11-MUA), where the immobilization was due to chemical bonding. The change of IgG layer formation on the two base layers as a function of the IgG concentration was investigated by surface plasmon resonance (SPR), atomic force microscopy (AFM) in a non-contact mode, and spectroscopic ellipsometry (SE). It was observed that the IgG layer was immobilized more evenly on the thiolated protein G layer than on the 11-MUA layer, based on the SPR measurements. The surface topology analysis by AFM indicated that the IgG layer was immobilized on the protein G layer according to the envelope profile of the base layer. Based on the SE analysis, it was determined that the IgG layer thickness on the thiolated protein G layer increased with increasing IgG concentration. Based on the above analyses, the scheme for orientation of IgG immobilized on the thiolated protein G layer was proposed.     

Oriented immobilization of biologically active proteins as a tool for revealing protein interactions and function

The advantages of oriented immobilization of biologically active proteins are good steric accessibilities of active binding sites and increased stability. This not only may help to increase the production of preparative procedures but is likely to promote current knowledge about how the living cells or tissues operate. Protein inactivation starts with the unfolding of the protein molecule by the contact of water with hydrophobic clusters located on the surface of protein molecules, which results in ice-like water structure. Reduction of the nonpolar surface area by the formation of a suitable biospecifc complex or by use of carbohydrate moieties thus may stabilize proteins. This review discusses oriented immobilization of antibodies by use of immobilized protein A or G. The section about oriented immobilization of proteins by use of their suitable antibodies covers immobilization of enzymes utilizing their adsorption on suitable immunosorbents prepared using monoclonal or polyclonal antibodies, preparation of bioaffinity adsorbent for the isolation of concanavalin A and immobilization of antibodies by use of antimouse immunoglobulin G, Fc-specific (i.e. specific towards the constant region of the molecule). In the further section immobilization of antibodies and enzymes through their carbohydrate moieties is described. Oriented immobilization of proteins can be also based on the use of boronate affinity gel or immobilized metal ion affinity chromatography technique. Biotin–avidin or streptavidin techniques are mostly used methods for oriented immobilization. Site-specific attachment of proteins to the surface of solid supports can be also achieved by enzyme, e.g., subtilisin, after introduction a single cysteine residue by site-directed mutagenesis.     

Evaluation of antibody immobilization methods for piezoelectric biosensor application

The immobilization of anti-Salmonella antibodies by two methods were studied and evaluated for their potential use in a piezoelectric biosensor. The optimum temperature-time combinations for the highest immobilization yields were determined for both methods. Protein A binding was found to be 67.4+/-3.8% on the gold surface which then allowed an immobilization of 42.1+/-2.09% antibody. The degree of antibody immobilization via surface aldehyde groups of glutaraldehyde (GA) on a precoated quartz crystal with polyethylenimine (PEI) was 31.6+/-0.3%. A piezoelectric probe was designed and used in dry assays to observe the frequency change due to addition of mass by the immobilization layers. The frequency changes recorded showed a better reproducibility and less added mass for the Protein A method. The frequency decrease due to microg of added antibodies was compared to frequency decrease calculated by the Sauerbrey equation. The experimental data was found to be only approximately 8% of theoretical data. The functionality of the immobilized antibodies with the Protein A method was tested with S. typhimurium in a wet chamber and the frequency decrease was compared to results of a similar system activated with PEI-GA immobilization. The frequency decreases with S. typhimurium concentration of approximately 1.5 x 10(9) CFU/ml were 50+/-2 Hz and 44+/-3 Hz for the Protein A method and PEI-GA method, respectively. It was concluded that although both methods resulted in comparable activities in terms of % immobilized protein and frequency decreases due to Salmonella binding, the Protein A method was favorable due to stability and better reproducibility of the immobilization layers.     

Immune complex formation enhances the binding of staphylococcal protein A to immunoglobulin G

Staphylococcal protein A binds efficiently to the Fc region of goat immunoglobulin G antibodies only after they are immune complexed to immobilized, but not fluid-phase, polyvalent antigen (human myeloma immunoglobulin E protein) or monovalent hapten (methotrexate). Compared to fluid-phase or immobilized free immunoglobulin G, the reactivity of anti-immunoglobulin antibodies bound to solid-phase antigen was enhanced at least 300-fold. Results with immobilized methotrexate indicated that two molecules of immunoglobulin G must be bound in proximity to bind one molecule of protein A. Thus, aggregation appears to be a necessary condition for protein A binding.     

Immobilization of unraveled immunoglobulin G using well-oriented ZZ–His protein on functionalized microtiter plate for sensitive immunoassay

Highly efficient protein immobilization is extremely crucial for solid-phase immunoassays. We present a strategy for oriented immobilization of functionally intact immunoglobulin G (IgG) on a polystyrene microtiter plate via iminodiacetic acid (IDA)–Ni²⁺ and ZZ–His protein interaction. We immobilized a ZZ–EAP (Escherichia coli alkaline phosphatase)–His fusion protein, which exhibits Fc binding, His tag, and intrinsic AP activities, and analyzed it against the interaction between rabbit IgG anti-horseradish peroxidase (anti-HRP) and its binding partner HRP to investigate the specificity and efficacy of this method. We compared the IDA–Ni²⁺–(ZZ–His) method with ZZ–EAP random immobilization using sandwich enzyme-linked immunosorbent assay, and the results showed that the former method had an enhanced signal, 10-fold higher sensitivity, and a wider linear range. Thus, the proposed method allows a broad range of oriented immobilized functionally intact IgG antibodies on polystyrene plates using only one type of IDA–Ni²⁺ chelate surface because the ZZ protein can bind to the Fc region of various IgGs.     

REAL-Select: Full-Length Antibody Display and Library Screening by Surface Capture on Yeast Cells

We describe a novel approach named REAL-Select for the non-covalent display of IgG-molecules on the surface of yeast cells for the purpose of antibody engineering and selection. It relies on the capture of secreted native full-length antibodies on the cell surface via binding to an externally immobilized ZZ domain, which tightly binds antibody Fc. It is beneficial for high-throughput screening of yeast-displayed IgG-libraries during antibody discovery and development. In a model experiment, antibody-displaying yeast cells were isolated from a 1∶1,000,000 mixture with control cells confirming the maintenance of genotype-phenotype linkage. Antibodies with improved binding characteristics were obtained by affinity maturation using REAL-Select, demonstrating the ability of this system to display antibodies in their native form and to detect subtle changes in affinity by flow cytometry. The biotinylation of the cell surface followed by functionalization with a streptavidin-ZZ fusion protein is an approach that is independent of the genetic background of the antibody-producing host and therefore can be expected to be compatible with other eukaryotic expression hosts such as P. pastoris or mammalian cells.     

Crystal structure of the HSV-1 Fc receptor bound to Fc reveals a mechanism for antibody bipolar bridging

Herpes simplex virus type-1 expresses a heterodimeric Fc receptor, gE-gI, on the surfaces of virions and infected cells that binds the Fc region of host immunoglobulin G and is implicated in the cell-to-cell spread of virus. gE-gI binds immunoglobulin G at the basic pH of the cell surface and releases it at the acidic pH of lysosomes, consistent with a role in facilitating the degradation of antiviral antibodies. Here we identify the C-terminal domain of the gE ectodomain (CgE) as the minimal Fc-binding domain and present a 1.78-Å CgE structure. A 5-Å gE-gI/Fc crystal structure, which was independently verified by a theoretical prediction method, reveals that CgE binds Fc at the C _H2-C _H3 interface, the binding site for several mammalian and bacterial Fc-binding proteins. The structure identifies interface histidines that may confer pH-dependent binding and regions of CgE implicated in cell-to-cell spread of virus. The ternary organization of the gE-gI/Fc complex is compatible with antibody bipolar bridging, which can interfere with the antiviral immune response.     

Internal image properties of a monoclonal auto-anti-idiotypic antibody and its binding to aldosterone receptors

A monoclonal anti-idiotypic antibody (H10E4C9F) that interacts with the aldosterone receptors was generated using an auto-anti-idiotypic approach by immunizing a mouse with a 3-O-carboxymethyloxime of aldosterone coupled to bovine serum albumin. This antibody, an IgG1, displayed internal image properties of aldosterone and was considered as an Ab2 beta according to the following criteria. (i) H10E bound to Fab fragments of affinity-purified rabbit anti-aldosterone antibody that had high affinity for aldosterone (Kd = 5 x 10(-10) M). Binding was inhibited by aldosterone but not by estradiol. (ii) H10E inhibited [3H]aldosterone binding to rabbit polyclonal antibodies and also to murine monoclonal antibodies raised during the same fusion. Inhibition was concentration-dependent. These results are consistent with the antibody recognizing an interspecies cross-reacting epitope involved in the aldosterone combining site. (iii) The antibody could be affinity-purified on an immobilized monoclonal anti-aldosterone antibody. (iv) It inhibited [3H]aldosterone binding to rabbit kidney cytosolic aldosterone receptors but had no effect on glucocorticoid receptors. Additional evidence for the interaction of H10E with aldosterone receptors was provided by glycerol gradients analyses: the anti-idiotypic antibody displaced [3H]aldosterone and [3H]corticosterone from the native untransformed 9 S aldosterone receptor in the presence of RU 26988, a specific marker of glucocorticoid receptors. All of the above are consistent with the first successful production of a monoclonal antibody that mimics aldosterone and interacts specifically with the steroid binding domain of aldosterone receptors.