Three-dimensional structure of the mini-M conotoxin mr3a

Conotoxin mr3a from the venom of Conus marmoreus, a novel peptide that induces rolling seizures in mice, has the peptide sequence GCCGSFACRFGCVOCCV, where O is trans-4-hydroxyproline, and the chain is cross-linked with disulfide bonds between Cys-2 and Cys-16, Cys-3 and Cys-12, and Cys-8 and Cys-15. The tertiary structure of mr3a was determined by 2D 1H NMR in combination with a standard distance-geometry algorithm. The final set of 22 structures for the peptide had a mean global backbone RMS deviation of 0.53 +/- 0.22 A based on 51 NOE, 6 hydrogen bond, 6 phi dihedral angle, and 3 disulfide bond constraints. Conotoxin mr3a is the first example of the new mini-M branch of conopeptides in the M superfamily. Members of the maxi-M branch, whose structures are known, include the mu- and psi-conotoxins, both of which share a common disulfide bond connectivity. Although mr3a has the same arrangement of Cys residues as the mu- and psi-conotoxins, its disulfide connectivity is different. This gives mr3a a distinctive "triple-turn" backbone.     

A sulfenic acid enzyme intermediate is involved in the catalytic mechanism of peptide methionine sulfoxide reductase from Escherichia coli

Methionine oxidation into methionine sulfoxide is known to be involved in many pathologies and to exert regulatory effects on proteins. This oxidation can be reversed by a ubiquitous monomeric enzyme, the peptide methionine sulfoxide reductase (MsrA), whose activity in vivo requires the thioredoxin-regenerating system. The proposed chemical mechanism of Escherichia coli MsrA involves three Cys residues (positions 51, 198, and 206). A fourth Cys (position 86) is not important for catalysis. In the absence of a reducing system, 2 mol of methionine are formed per mole of enzyme for wild type and Cys-86 --> Ser mutant MsrA, whereas only 1 mol is formed for mutants in which either Cys-198 or Cys-206 is mutated. Reduction of methionine sulfoxide is shown to proceed through the formation of a sulfenic acid intermediate. This intermediate has been characterized by chemical probes and mass spectrometry analyses. Together, the results support a three-step chemical mechanism in vivo: 1) Cys-51 attacks the sulfur atom of the sulfoxide substrate leading, via a rearrangement, to the formation of a sulfenic acid intermediate on Cys-51 and release of 1 mol of methionine/mol of enzyme; 2) the sulfenic acid is then reduced via a double displacement mechanism involving formation of a disulfide bond between Cys-51 and Cys-198, followed by formation of a disulfide bond between Cys-198 and Cys-206, which liberates Cys-51, and 3) the disulfide bond between Cys-198 and Cys-206 is reduced by thioredoxin-dependent recycling system process.     

Rat gro/melanoma growth-stimulating activity. Assessment of the structure responsible for chemotactic activity by use of its fragments prepared by proteolysis and chemical synthesis.

Rat gro/melanoma growth-stimulating activity is a dimer composed of two identical subunits. Each subunit consists of 72 amino-acid residues and contains two disulfide bridges. In order to obtain information on the structure responsible for chemotactic activity, various fragments of gro were prepared and tested for their ability to induce chemotaxis. None of the fragments corresponding to residues 1-6, 1-21, 12-31, 36-50 or 52-72 was active as a chemoattractant. Reduced and carboxymethylated gro as well as the tryptic peptide consisting of three peptides, residues 9-21, 28-45 were and 49-61, linked by two disulfide bonds Cys-9-Cys-35 and Cys-11-Cys-51, were inactive. Also, these, peptides did not inhibit the chemotactic activity of gro. Rat gro lacking the N-terminal 6 residues had a reduced activity and the one lacking the C-terminal Lys was as active as intact gro. Therefore, an almost entire portion of the molecule including disulfide cross-links is required for chemotactic activity.     

Determination of disulfide bond pairs and stability in recombinant tick anticoagulant peptide.

Tick anticoagulant peptide (TAP) is a potent and selective inhibitor of blood coagulation factor Xa (Waxman, L., Smith, D.E., Arcuri, K.E., and Vlasuk, G.P. (1990) Science 248, 593-596). The 60-amino acid sequence of TAP shows limited homology to Kunitz-type inhibitors, including cysteines at positions 5, 15, 33, 39, 55, and 59. For detailed biochemical and pharmacological studies, a recombinant version of TAP (rTAP) has been produced in yeast. To determine the arrangement of the disulfide bonds, rTAP was cleaved with trypsin and chymotrypsin and the purified peptides sequenced using a gas-phase sequenator. The positions of the disulfide bonds were assigned by identifying the cycle(s) at which di-phenylthiohydan-toin-cystine was released. The specific disulfide bridges, Cys-5 to Cys-59, Cys-15 to Cys-39, and Cys-33 to Cys-55, are analogous to those in the prototype Kunitz-type inhibitor, bovine pancreatic trypsin inhibitor (BPTI). While treatment of BPTI with dithiothreitol rapidly and specifically reduced one disulfide bond, the reduction of disulfide bonds in rTAP proceeded at a slower rate and appeared to be nonspecific, reaching a maximum of two disulfides reduced. Reduced rTAP derivatized with either iodoacetic acid or iodoacetamide lost 59% of its inhibitory activity. In contrast, BPTI alkylated with iodoacetic acid inhibited trypsin half as well as the iodoacetamide derivative. Although the arrangement of disulfides in the two inhibitors is the same, their susceptibility to reduction is markedly different.     

Acetylcholine receptor binding site contains a disulfide cross-link between adjacent half-cystinyl residues

A conserved feature of all nicotinic receptors is the presence of a readily reducible disulfide bond adjacent to the acetylcholine binding site. Previously we showed that in intact receptor from Torpedo californica electric tissue reduction of this disulfide followed by affinity alkylation with 4-(N-maleimido)benzyltri[3H] methylammonium iodide specifically and uniquely labels the alpha subunit residues Cys-192 and Cys-193. To identify all of the half-cystinyl residues contributing to the binding site disulfide(s), we have now reduced receptor under mild conditions and alkylated with a mixture of 4-(N-maleimido)benzyltri[3H]methylammonium iodide and N-[1-14C]ethylmaleimide and find that Cys-192 and Cys-193 are labeled exclusively. Furthermore, from unreduced receptor we have isolated two cyanogen bromide peptides of alpha, one containing Cys-192 and Cys-193, and the other containing Cys-128 and Cys-142 (which are the other potential contributors to the binding site disulfide(s]. These isolated peptides incorporate iodo[1-14C]acetamide only following reduction by dithiothreitol. Our results demonstrate that: 1) the binding site disulfide is between Cys-192 and Cys-193; 2) Cys-128 is disulfide-cross-linked to Cys-142; and 3) under conditions that reduce Cys-192 and Cys-193 completely, Cys-128 and Cys-142 remain cross-linked. At the acetylcholine binding site, agonists induce a local conformational change that stabilizes the binding site disulfide against reduction. We suggest that a transition between two stable conformations of the vicinal disulfide, both involving a nonplanar cis peptide bond between Cys-192 and Cys-193, is associated with receptor activation by agonists.     

Cooperative disulfide bond formation in apamin.

Apamin is being studied as a model for the folding mechanism of proteins whose structures are stabilized by disulfide bonds. Apamin consists of 18 amino acid residues and forms a stable structure consisting of a C-terminal alpha-helix and two reverse turns. This structure is stabilized by two disulfide bonds connecting Cys-1 to Cys-11 and Cys-3 to Cys-15. We used glutathione and dithiothreitol as reference thiols to measure the stabilities of the two disulfide bonds as a function of urea concentration and temperature in order to understand what contributes to the stability of the native structure. The results demonstrate modest contributions from secondary structure to the overall stability of the two disulfide bonds. The equilibrium constants for disulfide bond formation between the fully reduced peptide and the native structure with two disulfide bonds at 25 degrees C and pH 7.0 are 0.42 M2 using glutathione and 2.7 x 10(-5) using dithiothreitol. The equilibrium constant decreases by a factor of approximately 4 in 8 M urea and decreases by a factor of 3 between 0 and 60 degrees C. At least three one-disulfide intermediates are found at low concentrations in the equilibrium mixture. Using glutathione, the equilibrium constants for forming the one-disulfide intermediates with respect to the reduced peptide are approximately 0.025 M. The second disulfide bond forms with an equilibrium constant of approximately 17 M. Thus, apamin folding is very cooperative, but the native structure is only modestly stabilized by urea- or temperature-denaturable secondary structure.     

Determination of disulfide array and subunit structure of taste-modifying protein, miraculin

The taste-modifying protein, miraculin (Theerasilp, S. et al. (1989) J. Biol. Chem. 264, 6655-6659) has seven cysteine residues in a molecule composed of 191 amino acid residues. The formation of three intrachain disulfide bridges at Cys-47-Cys-92, Cys-148-Cys-159 and Cys-152-Cys-155 and one interchain disulfide bridge at Cys-138 was determined by amino acid sequencing and composition analysis of cystine-containing peptides isolated by HPLC. The presence of an interchain disulfide bridge was also supported by the fact that the cystine peptide containing Cys-138 showed a negative color test for the free sulfhydryl group and a positive test after reduction with dithiothreitol. The molecular mass of non-reduced miraculin (43 kDa) in sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) was nearly twice the calculated molecular mass based on the amino acid sequence and the carbohydrate content of reduced miraculin (25 kDa). The molecular mass of native miraculin determined by low-angle laser light scattering was 90 kDa. Application of a crude extract of miraculin to a Sephadex G-75 column indicated that the taste-modifying activity appears at 52 kDa. It was concluded that native miraculin in pure form is a tetramer of the 25 kDa-peptide and native miraculin in crude state or denatured, non-reduced miraculin in pure form is a dimer of the peptide. Both tetramer miraculin and native dimer miraculin in crude state had the taste-modifying activity.     

NMR structure of the Euplotes raikovi pheromone Er-23 and identification of its five disulfide bonds.

The NMR solution structure of the 51 residue pheromone Er-23 from the ciliated protozoan Euplotes raikovi (Er) was calculated with the torsion angle dynamics program DYANA from 582 nuclear Overhauser enhancement (NOE) upper limit distance constraints, 46 dihedral angle constraints and 30 disulfide bond constraints. The disulfide bridges had not been assigned by chemical methods, and initially were assigned tentatively on the basis of inspection of the positioning of the Cys sulfhydryl groups in a bundle of 20 conformers that was calculated without disulfide bond constraints. The assignment of disulfide bridges was then validated by structure calculations that assessed the compatibility of plausible alternative Cys-Cys disulfide combinations with the input of NOE upper distance constraints and dihedral angle constraints. For a group of 20 conformers used to characterize the solution structure, the average pairwise root-mean-square distances from the mean coordinates calculated for the backbone heavy atoms N, C(alpha) and C' of resideus 1-51 is 0.38 A. The molecular architecture consists of a three-dimensional arrangement of five helices comprised of residues 2-8, 14-17, 26-29, 34-36 and 38-47, with five disulfide bridges in the positions 3-24, 6-16, 13-47, 27-40, and 35-51, which has so far not been represented in the Protein Data Bank. Er-23 is unique among presently known Er-pheromones with respect to size, sequence, the number of disulfide bonds and the three-dimensional structure, thus providing a new structural basis for rationalizing the physiological functions of this protein family.     

Determination of disulfide bond assignment of human vitamin K-dependent gamma-glutamyl carboxylase by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Vitamin K-dependent gamma-glutamyl carboxylase is a 758 amino acid integral membrane glycoprotein that catalyzes the post-translational conversion of certain protein glutamate residues to gamma-carboxyglutamate. Carboxylase has ten cysteine residues, but their form (sulfhydryl or disulfide) is largely unknown. Pudota et al. in Pudota, B. N., Miyagi, M., Hallgren, K. W., West, K. A., Crabb, J. W., Misono, K. S., and Berkner, K. L. (2000) Proc. Natl. Acad. Sci. U. S. A. 97, 13033-13038 reported that Cys-99 and Cys-450 are the carboxylase active site residues. We determined the form of all cysteines in carboxylase using in-gel protease digestion and matrix-assisted laser desorption/ionization mass spectrometry. The spectrum of non-reduced, trypsin-digested carboxylase revealed a peak at m/z 1991.9. Only this peak disappeared in the spectrum of the reduced sample. This peak's m/z is consistent with the mass of peptide 92-100 (Cys-99) disulfide-linked with peptide 446-453 (Cys-450). To confirm its identity, the m/z 1991.9 peak was isolated by a timed ion selector as the precursor ion for further MS analysis. The fragmentation pattern exhibited two groups of triplet ions characteristic of the symmetric and asymmetric cleavage of disulfide-linked tryptic peptides containing Cys-99 and Cys-450. Mutation of either Cys-99 or Cys-450 caused loss of enzymatic activity. We created a carboxylase variant with both C598A and C700A, leaving Cys-450 as the only remaining cysteine residue in the 60-kDa fragment created by limited trypsin digestion. Analysis of this fully active mutant enzyme showed a 30- and the 60-kDa fragment were joined under non-reducing conditions, thus confirming Cys-450 participates in a disulfide bond. Our results indicate that Cys-99 and Cys-450 form the only disulfide bond in carboxylase.     

A new liposomal formulation for antisense oligodeoxynucleotides with small size, high incorporation efficiency and good stability

The N-terminal domain of mouse Sonic hedgehog (Shh-N) expressed in mammalian cells showed four-fold bands on non-reduced SDS-PAGE, though it was homogeneous under reduced conditions. It contains three cysteine residues, Cys-25, Cys-103, and Cys-184, which may be concerned with this heterogeneity. Therefore, we examined the formation of a disulfide bond in the recombinant Shh-N and identified three kinds of disulfides with a combination of peptide mapping and NH(2)-terminal amino acid sequencing analysis. Among them, one type of the Shh-N containing a disulfide bond of Cys-103/Cys-184 could be separated from the other Shh-Ns using reverse phase HPLC and had no activity of alkaline phosphatase induction in C3H10T1/2 cells. This molecule could also be made by denaturation of the purified Shh-N with guanidine-HCl under non-reduced conditions. On the other hand, the reduced Shh-N and the reduced S-methylated Shh-N at cysteine residues showed approximately 10-fold higher activity compared to the originally purified Shh-N. These results suggested that Shh-N was synthesized as an active form whose three cysteine residues did not form disulfide and inactivated finally by forming a disulfide bond between Cys-103 and Cys-184.     

Disulfide structures of highly bridged peptides: a new strategy for analysis.

A new approach is described for analyzing disulfide linkage patterns in peptides containing tightly clustered cystines. Such peptides are very difficult to analyze with traditional strategies, which require that the peptide chain be split between close or adjacent Cys residues. The water-soluble tris-(2-carboxyethyl)-phosphine (TCEP) reduced disulfides at pH 3, and partially reduced peptides were purified by high performance liquid chromatography with minimal thiol-disulfide exchange. Alkylation of free thiols, followed by sequencer analysis, provided explicit assignment of disulfides that had been reduced. Thiol-disulfide exchange occurred during alkylation of some peptides, but correct deductions were still possible. Alkylation competed best with exchange when peptide solution was added with rapid mixing to 2.2 M iodoacetamide. Variants were developed in which up to three alkylating agents were used to label different pairs of thiols, allowing a full assignment in one sequencer analysis. Model peptides used included insulin (three bridges, intra- and interchain disulfides; -Cys.Cys- pair), endothelin and apamin (two disulfides; -Cys.x.Cys- pair), conotoxin GI and isomers (two disulfides; -Cys.Cys- pair), and bacterial enterotoxin (three bridges within 13 residues; two -Cys.Cys- pairs). With insulin, all intermediates in the reduction pathway were identified; with conotoxin GI, analysis was carried out successfully for all three disulfide isomers. In addition to these known structures, the method has been applied successfully to the analysis of several previously unsolved structures of similar complexity. Rates of reduction of disulfide bonds varied widely, but most peptides did not show a strongly preferred route for reduction.     

Substrate specificity of recombinant human renal renin: effect of histidine in the P2 subsite on pH dependence

Steady-state kinetic analysis of human renin demonstrates the histidine proximal to the substrate scissile peptide bond contributes to the unique specificity and pH dependence of this aspartyl protease. Recombinant human renal renin purified from mammalian cell culture appears to be indistinguishable from renin isolated from human kidney with respect to specific activity (1000 Goldblatt units/mg). Recombinant renin contains carbohydrate covalently attached to asparagines at positions 5 and 75 (renin numbering) and disulfide linkages at Cys-51/Cys-58, Cys-217/Cys-221, and Cys-259/Cys-296. Renin pH dependence was evaluated between pH 4.0 and 8.0 by using a synthetic substrate identical with the amino terminus of porcine angiotensinogen (Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu*Leu-Val-Tyr-Ser, where the asterisk indicates the scissile peptide bond and the proximal histidine is in italics) and an analogous tetradecapeptide where the proximal histidine was substituted with glutamine. Comparison of the pH profiles shows the catalytic efficiency (V/Km) and maximal velocity (V) of renin are greater above pH 6.5 with the substrate containing histidine proximal to the scissile peptide bond, but below pH 5.0 these parameters are greater with the glutamine substrate analogue. Solvent isotope effects show that proton transfer contributes to the rate-limiting step in catalysis with both substrates and that the proximal histidine does not serve as a base in the catalytic mechanism. Molecular modeling indicates the substrate histidine could hydrogen bond to Asp-226 of the enzyme (renin numbering), thus perturbing the ionization of the catalytic aspartyl groups (Asp-38 and Asp-226).(ABSTRACT TRUNCATED AT 250 WORDS)     

Formation of a native-like subdomain in a partially folded intermediate of bovine pancreatic trypsin inhibitor.

In the folding of bovine pancreatic trypsin inhibitor (BPTI), the single-disulfide intermediate [30-51] plays a key role. We have investigated a recombinant analog of [30-51] using a 2-dimensional nuclear magnetic resonance (2D-NMR). This recombinant analog, named [30-51]Ala, contains a disulfide bond between Cys-30 and Cys-51, but contains alanine in place of the other cysteines in BPTI to prevent the formation of other intermediates. By 2D-NMR, [30-51]Ala consists of 2 regions-one folded and one predominantly unfolded. The folded region resembles a previously characterized peptide model of [30-51], named P alpha P beta, that contains a native-like subdomain with tertiary packing. The unfolded region includes the first 14 N-terminal residues of [30-51] and is as unfolded as an isolated peptide containing these residues. Using protein dissection, we demonstrate that the folded and unfolded regions of [30-51]Ala are structurally independent. The partially folded structure of [30-51]Ala explains many of the properties of authentic [30-51] in the folding pathway of BPTI. Moreover, direct structural characterization of [30-51]Ala has revealed that a crucial step in the folding pathway of BPTI coincides with the formation of a native-like subdomain, supporting models for protein folding that emphasize the formation of cooperatively folded subdomains.     

Region of heat-stable enterotoxin II of Escherichia coli involved in translocation across the outer membrane

Heat-stable enterotoxin II of Escherichia coli (STII) is synthesized as a precursor form consisting of pre- and mature regions. The pre-region is cleaved off from the mature region during translocation across the inner membrane, and the mature region emerges in the periplasm. The mature region, composed of 48 amino acid residues, is processed in the periplasm by DsbA to form an intramolecular disulfide bond between Cys-10 and Cys-48 and between Cys-21 and Cys-36. STII formed with these disulfide bonds is efficiently secreted out of the cell through the secretory system, including TolC. However, it remains unknown which regions of STII are involved in interaction with TolC. In this study, we mutated the STII gene and examined the secretion of these STIIs into the culture supernatant. A deletion of the part covering from amino acid residue 37 to the carboxy terminal end did not markedly reduce the efficiency of secretion of STII into the culture supernatant. On the other hand, the efficiency of secretion of the peptide covering from the amino terminal end to position 18 to the culture supernatant was significantly low. These observations indicated that the central region of STII from amino acid residue 19 to that at position 36 is involved in the secretion of STII into the milieu. The experiment using a dsbA-deficient strain of E. coli showed that the disulfide bond between Cys-21 and Cys-36 by DsbA is necessary for STII to adapt to the structure that can cross the outer membrane.     

Disulfide bonds of herpes simplex virus type 2 glycoprotein gB.

Glycoprotein B (gB) is the most highly conserved envelope glycoprotein of herpesviruses. The gB protein is required for virus infectivity and cell penetration. Recombinant forms of gB being used for the development of subunit vaccines are able to induce virus-neutralizing antibodies and protective efficacy in animal models. To gain structural information about the protein, we have determined the location of the disulfide bonds of a 696-amino-acid residue truncated, recombinant form of herpes simplex virus type 2 glycoprotein gB (HSV gB2t) produced by expression in Chinese hamster ovary cells. The purified protein, which contains virtually the entire extracellular domain of herpes simplex virus type 2 gB, was digested with trypsin under nonreducing conditions, and peptides were isolated by reversed-phase high-performance liquid chromatography (HPLC). The peptides were characterized by using mass spectrometry and amino acid sequence analysis. The conditions of cleavage (4 M urea, pH 7) induced partial carbamylation of the N termini of the peptides, and each disulfide peptide was found with two or three different HPLC retention times (peptides with and without carbamylation of either one or both N termini). The 10 cysteines of the molecule were found to be involved in disulfide bridges. These bonds were located between Cys-89 (C1) and Cys-548 (C8), Cys-106 (C2) and Cys-504 (C7), Cys-180 (C3) and Cys-244 (C4), Cys-337 (C5) and Cys-385 (C6), and Cys-571 (C9) and Cys-608 (C10). These disulfide bonds are anticipated to be similar in the corresponding gBs from other herpesviruses because the 10 cysteines listed above are always conserved in the corresponding protein sequences.     

Reinvestigation of the disulfide bridge arrangement in human pro-opiomelanocortin N-terminal segment (hNT 1-76)

The cystine bridge structure of the amino-terminal fragment of human pro-opiomelanocortin has been reinvestigated. Highly purified amino-terminal fragment 1-76 was rapidly isolated from human pituitaries using only reverse-phase liquid chromatography (RP-HPLC). This peptide was then subjected to trypsin and V8-protease digestion and the products separated by RP-HPLC and subjected to amino acid and microsequence analysis. The results show that disulfide bridges link Cys-2 to Cys-24 and Cys-8 to Cys-20. Amino acid analysis and amino sugar determination confirm (i) the previously proposed sequence and (ii) the suggestion of the presence of two glycosylation sites in this molecule. These are most probably located at Thr-45 (O-glycosylation) and at Asn-65 (N-glycosylation).     

Disulfide bridges in tomato pectinesterase: variations from pectinesterases of other species; conservation of possible active site segments.

Analysis of tomato pectinesterase by carboxymethylation, with and without reduction, shows that the enzyme has two intrachain disulfide bridges. Analysis of fragments obtained from the native enzyme after digestion with pepsin identified bridges connecting Cys-98 with Cys-125, and Cys-166 with Cys-200. The locations of disulfide bridges in tomato pectinesterase are not identical to those in three distantly related pectinesterases (18-33% residue identities) from microorganisms. However, one half-Cys (i.e., Cys-166) position is conserved in all four enzymes. Sequence comparisons of the overall structures suggest a special importance for three short segments of the entire protein. One segment is at the N-terminal part of the tomato pectinesterase, another in the C-terminal portion near the distal end of the second disulfide loop, and the third segment is located in the central part between the two disulfide bridges. The latter segment, encompassing only 40 residues of the entire protein, appears to high-light a functional site in a midchain segment.     

Functional role of two interhelical disulfide bonds in human Cox17 protein from a structural perspective

Human Cox17 is the mitochondrial copper chaperone responsible for supplying copper ions, through the assistance of Sco1, Sco2, and Cox11, to cytochrome c oxidase, the terminal enzyme of the mitochondrial energy-transducing respiratory chain. It consists of a coiled coil-helix-coiled coil-helix domain stabilized by two disulfide bonds and binds one copper(I) ion through a Cys-Cys motif. Here, the structures and the backbone mobilities of two Cox17 mutated forms with only one interhelical disulfide bond have been analyzed. It appears that the inner disulfide bond (formed by Cys-36 and Cys-45) stabilizes interhelical hydrophobic interactions, providing a structure with essentially the same structural dynamic properties of the mature Cox17 state. On the contrary, the external disulfide bond (formed by Cys-26 and Cys-55) generates a conformationally flexible α-helical protein, indicating that it is not able to stabilize interhelical packing contacts, but is important for structurally organizing the copper-binding site region.     

Expression of a synthetic gene encoding potato carboxypeptidase inhibitor using a bacterial secretion vector.

A synthetic gene encoding the 39-amino-acid (aa) potato carboxypeptidase inhibitor IIa (PCI-IIa) has been constructed and expressed using the secretion vector, pIN-III-ompA-3, fused in frame to the OmpA signal peptide-encoding sequence. Recombinant Escherichia coli secreted a PCI with 10 additional aa at the N terminus (rePCI + 10). These extra aa were removed by site-directed mutagenesis giving a PCI with no additional aa (rePCI), as shown by fast atom bombardment mass spectrometry (M(r) 4295). The two forms of rePCI were found almost exclusively in the culture medium, not in the periplasmic space, as would be expected from OmpA signal peptide fusions. Both rePCI + 10 and rePCI are biologically active and react strongly with serum raised against PCI from potato. A method for the purification of rePCI to homogeneity has been developed. The purified rePCI shows a Ki for carboxypeptidase A within the range of the natural PCI-IIa (1.5-2.7 nM). These results indicate that both rePCI + 10 and rePCI are properly folded and that their three disulfide bridges are correctly formed. Together with previous reports, our results show that fusion to a secretion signal peptide is an effective way of producing small proteins containing disulfide bridges in a biologically active form.     

Enhancement of the thermostability of subtilisin E by introduction of a disulfide bond engineered on the basis of structural comparison with a thermophilic serine protease

Sites for Cys substitutions to form a disulfide bond were chosen in subtilisin E from Bacillus subtilis, a cysteine-free bacterial serine protease, based on the structure of aqualysin I of Thermus aquaticus YT-1 (a thermophilic subtilisin-type protease containing two disulfide bonds). Cys residues were introduced at positions 61 (wild-type, Gly) and 98 (Ser) in subtilisin E by site-directed mutagenesis. The Cys-61/Cys-98 mutant subtilisin appeared to form a disulfide bond spontaneously in the expression system used and showed a catalytic efficiency equivalent to that of the wild-type enzyme for hydrolysis of a synthetic peptide substrate. The thermodynamic characteristics of these enzymes were examined in terms of enzyme autolysis (t1/2) and thermal stability (Tm). The half-life of the Cys-61/Cys-98 mutant was found to be 2-3 times longer than that of the wild-type enzyme. Similar results were obtained by differential scanning calorimetry. The disulfide mutant showed a Tm of 63.0 degrees C, which was 4.5 degrees C higher than that observed for the wild-type enzyme. Under reducing conditions, however, the characteristics of the mutant enzyme were found to revert to those of the wild-type enzyme. These results strongly suggest that the introduction of a disulfide bond by site-directed mutagenesis enhanced the thermostability of subtilisin E without changing the catalytic efficiency of the enzyme.