Study of hydration of cross-linked high amylose starch by solid state 13C NMR spectroscopy

Starch is subjected to chemical treatments such as cross-linking or hydroxypropylation to meet the material requirements for food uses or controlled release in the pharmaceutical industries. In this work, two types of cross-linking formulations have been employed for the preparation of high amylose starch for use as an excipient for sustained drug release. The structural differences and chain dynamics of the modified starches in the dry and hydrated states have been compared by the use of variable contact time cross polarization-magic angle spinning solid state (13)C NMR spectroscopy.     

NMR spectroscopy and imaging studies of pharmaceutical tablets made of starch

Modified polysaccharides such as high amylose starch are used as excipient in controlled drug release technology. Crosslinked high amylose starch is a hydrophilic matrix used for the sustained release of drugs. Tablets using modified hybrid starch as excipient display zero-order release over 2–24 h. A release over 3–4 weeks was observed when the modified starch is used as an implant. The use of starch in controlled release system is appealing because it could be easily metabolized in the human body. We review here the use of NMR imaging and solid state ¹³C spectroscopy in the study of the various factors influencing drug release in such systems.     

Membrane formation and drug loading effects in high amylose starch tablets studied by NMR imaging

Cross-linked high amylose starch is used as an excipient in the preparation of pharmaceutical tablets for the sustained release of drugs. NMR imaging with contrast enhanced by proton density and by self-diffusion coefficient was used to follow the water uptake and swelling, two critical parameters controlling the drug release of the cross-linked starch tablets containing 10 wt % of ciprofloxacin and of acetaminophen, respectively. The drug-loaded tablets were studied in a H2O/D2O mixture at 37 degrees C in comparison to the tablets without any drug loading. The diffusion of water in the tablets all showed a Fickian behavior, but the kinetics of water uptake was faster in the case of the drug-loaded tablets. The formation of a membrane at the water/tablet interface was observed.     

Starch phosphates prepared by reactive extrusion as a sustained release agent

Characteristics of native starch have limited its application in solid dosage forms as a sustained release agent. There is a growing interest in improving starch functionality for sustained release applications because of its non-toxicity and biodegradability. This study attempted to investigate extruded starch phosphates as an excipient in sustaining drug release. Starches from various botanical sources with different amylose contents, including waxy corn, common corn, Hylon V (50% amylose), Hylon VII (70% amylose), and potato, were used to prepare starch phosphates at pH 9.0 or 11.0 using a reactive extrusion method. Phosphorous content was higher for starch phosphates prepared at pH 9.0 than at pH 11.0, and varied with starch type when phosphorylated at pH 9.0. Reactive extrusion produced starch extrudates that upon forming hydrogels were capable of sustaining release of metoprolol tartrate (MPT). The structural features of the hydrogel as modified by the phosphorylation reaction were found to alter the kinetics of drug release from the swellable matrices. The unmodified extrudates formed weaker gels as evidenced by their rheological properties, and showed faster drug release. Waxy corn starch phosphorylated at pH 9.0 as well as common corn and potato starches phosphorylated at pH 11.0 were found to exhibit more case-II-like properties attributed to a high density of cross-links and stronger chain entanglement. Waxy corn starch phosphorylated at pH 9.0 exhibited the lowest degree of drug release. The entanglement among amylopectin molecules and branch chains was suggested to play a role in governing MPT release.     

Imaging of high-amylose starch tablets. 3. Initial diffusion and temperature effects

The penetration of water into cross-linked high amylose starch tablets was studied at different temperatures by nuclear magnetic resonance (NMR) imaging, which follows the changes occurring at the surface and inside the starch tablets during swelling. It was found that the swelling was anisotropic, whereas water diffusion was almost isotropic. The water proton image profiles at the initial stage of water penetration were used to calculate the initial diffusion coefficient. The swelling and water concentration gradients in this controlled release system show significant temperature dependence. Diffusion behavior changed from Fickian to Case II diffusion with increasing temperature. The observed phenomena are attributed to the gelatinization of starch and the pseudo-cross-linking effect of double helix formation.     

Two unique ligand-binding clamps of Rhizopus oryzae starch binding domain for helical structure disruption of amylose

The N-terminal starch binding domain of Rhizopus oryzae glucoamylase (RoSBD) has a high binding affinity for raw starch. RoSBD has two ligand-binding sites, each containing a ligand-binding clamp: a polyN clamp residing near binding site I is unique in that it is expressed in only three members of carbohydrate binding module family 21 (CBM21) members, and a Y32/F58 clamp located at binding site II is conserved in several CBMs. Here we characterized different roles of these sites in the binding of insoluble and soluble starches using an amylose-iodine complex assay, atomic force microscopy, isothermal titration calorimetry, site-directed mutagenesis, and structural bioinformatics. RoSBD induced the release of iodine from the amylose helical cavity and disrupted the helical structure of amylose type III, thereby significantly diminishing the thickness and length of the amylose type III fibrils. A point mutation in the critical ligand-binding residues of sites I and II, however, reduced both the binding affinity and amylose helix disruption. This is the first molecular model for structure disruption of the amylose helix by a non-hydrolytic CBM21 member. RoSBD apparently twists the helical amylose strands apart to expose more ligand surface for further SBD binding. Repeating the process triggers the relaxation and unwinding of amylose helices to generate thinner and shorter amylose fibrils, which are more susceptible to hydrolysis by glucoamylase. This model aids in understanding the natural roles of CBMs in protein-glycan interactions and contributes to potential molecular engineering of CBMs.     

A rheological investigation of cereal starch pastes and gels. Effect of pasting procedures

Wheat and maize starches have been pasted using four different pasting procedures by varying the heating and stirring rates. The flow behaviour of hot starch pastes was investigated over a wide range of concentrations (∼ 3 to 10·5%). For each type of starch each pasting procedure resulted in a specific flow behaviour. Flow curves were tentatively interpreted on the basis of swelling-solubility values, and it was demonstrated that the overall viscosity of starch pastes is primarily governed by a combination of the volume fraction of the disperse phase and the concentration and composition of the continuous phase. For the highest concentration, deformability of swollen particles seems to play a prevailing role. Concentrated starch gels also exhibited different elastic properties, depending upon pasting procedure and type of starch. Wheat starch gels were stiffer than maize gels and it was suggested that the main structural parameters involved are the deformability of the swollen particles and the amylose concentration of the continuous network.     

Impact of Physicochemical Environment on the Super Disintegrant Functionality of Cross-Linked Carboxymethyl Sodium Starch: Insight on Formulation Precautions

The aim of this work is to improve the understanding of the physicochemical mechanisms involved in the functionality of cross-linked carboxymethyl sodium starch (CCSS) as a tablet super disintegrant (SD). The behavior and properties of this SD (medium uptake, disintegration times, particle size, and rheology) was investigated in a wetting medium of different physicochemical properties. In particular, the relative permittivity (dielectric constant) of these media was intentionally modified for evaluating its effect on CCSS properties. Results showed different swelling behaviors of CCSS particles according to the relative permittivity of the tested media and allow to propose two underlying mechanisms that explain CCSS functionality. Both the intra-particular swelling and the inter-particular repulsion are affected by the relative permittivity of the media. Finally, disintegration test performed on tablets specially formulated with mannitol (used commonly as an excipient and known to modify relative permittivity) confirmed that the functionality of CCSS and therefore the disintegration of the tablet can be altered according to the mannitol content.KEY WORDS: cross-linked carboxymethyl sodium starch, disintegrant functionality, orally disintegrating tablets, relative permittivity, repulsive layers     

Preparation of clear noodles with mixtures of tapioca and high-amylose starches

Ways to simulate the making of clear noodles from mung bran starch were investigated by studying the molecular structures of mung bean and tapioca starches. Scanning electron micrographs showed that tapioca starch granules were smaller than those of mung bean starch. X-ray diffraction patterns of mung bean and tapioca starch were A- and C_A-patterns, respectively. Iodine affinity studies indicated that mung bean starch contained 37% of apparent amylose and tapioca starch contained 24%. Gel permeation chromatograms showed that mung bean amylopectin had longer peak chain-length of long-branch chains (DP 40) than that of tapioca starch (DP 35) but shorter peak chain-length of short-branch chains (DP 16) than that of tapioca starch (DP 21). P-31 n.m.r. spectroscopy showed that both starches contained phosphate monoesters, but only mung bean starch contained phospholipids. Physical properties, including pasting viscosity, gel strength, and thermal properties (gelatinization), were determined. The results of the molecular structure study and physical properties were used to develop acceptable products using mixtures of cross-linked tapioca and high-amylose maize starches. Tapioca starch was cross-linked by sodium trimetaphosphate (STMP) with various reaction times, pH values, and temperatures. The correlation between those parameters and the pasting viscosity were studied using a visco/amylograph. Starches, cross-linked with 0.1% STMP, pH 11.0, 3.5 h reaction time at 25, 35, and 45°C (reaction temperature), were used for making noodles. High-amylose maize starch (70% amylose) was mixed at varying ratios (9, 13, 17, 28, 37, and 44%) with the cross-linked tapioca starches. Analysis of the noodles included: tensile strength, water absorption, and soluble loss. Noodle sensory properties were evaluated using trained panelists. Noodles made from a mixture of cross-linked tapioca starch and 17% of a high-amylose starch were comparable to the clear noodles made from mung bean starch.     

Self-assembly of amylose-grafted carboxymethyl cellulose

In this study, we performed the self-assembly of the amylose-grafted carboxymethyl cellulose sodium salt (NaCMC) for the formation of nanofiber films under aqueous conditions. The introduction of amylose graft chains was conducted by the chemoenzymatic approach including phosphorylase-catalyzed enzymatic polymerization. The product had the rigid NaCMC main chain, which further assembled leading to nanofibers by the formation of double helix between the long amylose graft chains in the intermolecular NaCMC chains of the products. The lengths of the fibers were depended on degrees of polymerization of amylose chains. The nanofiber films were constructed by drying the alkaline solutions of the amylose-grafted NaCMC. The lengths of the nanofibers strongly affected their arrangements in the films. The nanofibers were merged further by washing out alkali to produce the robust nanofiber films.     

Cross-linking of wheat starch and hydroxypropylated wheat starch in alkaline slurry with sodium trimetaphosphate

Wheat starch was cross-linked at 40 °C and pH 11.0 by slurrying the starch (30% solids) in a solution of sodium trimetaphosphate (STMP), sodium hydroxide, and sodium sulfate. The extent of cross-linking was determined by an increase in alkaline fluidity or by a decrease in alkaline clarity. Response surface analysis showed that cross-linking increased with increasing levels of STMP (0.5-1.5%, based on starch, bos) and sodium sulfate (0–4.0%, bos) over a reaction period of 120–720 min. A regression equation with first and second order terms showed that STMP and sodium sulfate concentrations and the reaction time accounted for 99% of the variability in alkaline fluidity. Wheat starch (37% slurry) was hydroxypropylated by reaction with propylene oxide (8%, bos) for 24h at 45 °C in alkali (pH 11.5) containing 16.0% sodium sulfate (bos). The hydroxypropylated (4.5wt%) wheat starch (DS 0.12-0.13) was not isolated but was cross-linked with STMP (0.1-0.5%, bos) over a 10–40 min reaction period. A comparison of pasting curves at pH 3.5 showed that some of the cross-links produced by STMP were less stable than those produced by phosphoryl chloride, indicating a low level of pyrophosphate as well as monophosphate cross-links. The less stable cross-links were diminished by changing reaction conditions with STMP.     

Physico-chemical and degradative properties of in-planta re-structured potato starch

Starch re-structured directly in potato tubers by antisense suppression of starch branching enzyme (SBE), granule bound starch synthase (GBSS) or glucan water dikinase (GWD) genes was studied with the aim at disclosing the effects on resulting physico-chemical and enzyme degradative properties. The starches were selected to provide a combined system with specific and extensive alterations in amylose and covalently esterified glucose-6-phosphate (G6P) contents. As an effect of the altered chemical composition of the starches their hydrothermal characteristics varied significantly. Despite of the extreme alterations in phosphate content, the amylose content had a major affect on swelling power, enthalpy for starch gelatinization and pasting parameters as assessed by Rapid Visco Analysis (RVA). However, a combined influence of the starch phosphate and long glucan chains as represented by high amylose or long amylopectin chain length was indicated by their positive correlation to the final viscosity and set back (RVA) demonstrating the formation of a highly hydrated and gel-forming system during re-structuring of the starch pastes. Clear inverse correlations between glucoamylase-catalyzed digestibility and amylopectin chain length and starch phosphate and lack of such correlation with amylose content indicates a combined structuring role of the phosphate groups and amylopectin chains on the starch glucan matrix.     

The molecular deposition of transgenically modified starch in the starch granule as imaged by functional microscopy

The molecular deposition of starch extracted from normal plants and transgenically modified potato lines was investigated using a combination of light microscopy, environmental scanning electron microscopy (ESEM) and confocal laser scanning microscopy (CLSM). ESEM permitted the detailed (10 nm) topographical analysis of starch granules in their hydrated state. CLSM could reveal internal molar deposition patterns of starch molecules. This was achieved by equimolar labelling of each starch molecule using the aminofluorophore 8-amino-1,3,6-pyrenetrisulfonic acid (APTS). Starch extracted from tubers with low amylose contents (suppressed granule bound starch synthase, GBSS) showed very little APTS fluorescence and starch granules with low molecular weight amylopectin and/or high amylose contents showed high fluorescence. Growth ring structures were sharper in granules with normal or high amylose contents. High amylose granules showed a relatively even distribution in fluorescence while normal and low amylose granules had an intense fluorescence in the hilum indicating a high concentration of amylose in the centre of the granule. Antisense of the starch phosphorylating enzyme (GWD) resulted in low molecular weight amylopectin and small fissures in the granules. Starch granules with suppressed starch branching enzyme (SBE) had severe cracks and rough surfaces. Relationships between starch molecular structure, nano-scale crystalline arrangements and topographical-morphological features were estimated and discussed.     

Structure-properties relationship in cross-linked high-amylose starch for use in controlled drug release

Cross-linked high-amylose starch (CLHAS), obtained by high-amylose starch cross-linking, was recently introduced as an excipient (Contramid) for monolithic dosage forms that are able to control drug release over 18-24 h. These control properties are related to tablet swelling and are strongly dependent on the degree of the cross-linking of CLHAS. The permeability of solutes through CLHAS hydrogels depends on the chemical structure of the polymer. The aim of this study was to obtain a better understanding of how modifications in CLHAS molecular structures at the level of long-range and short-range order during the cross-linking and processing conditions relate to the release properties of the CLHAS matrices. Structural parameters such as crystallinity contribute significantly to the physical and mechanical aspects of starch products. X-ray diffractometry, FTIR spectroscopy, dissolution tests in vitro, and mechanical hardness (of dry tablets) were found to be sensitive to the cross-linking degree (cld) variation. Best release properties and highest mechanical hardness were obtained from CLHAS matrices with low-to-moderate crystallinity, where the V- and the B-type structures coexist with amorphous regions. X-ray and FTIR profiles of dry CLHAS powders were found to be predictive for release properties of CLHAS tablets.     

Determination of depolymerization kinetics of amylose, amylopectin, and soluble starch by Aspergillus oryzae alpha-amylase using a fluorimetric 2-p-toluidinylnaphthalene-6-sulfonate/flow-injection analysis system

This study reports on the determination of the depolymerization kinetics of amylose, amylopectin, and soluble starch by Aspergillus oryzae alpha-amylase using flow-injection analysis with fluorescence detection and 2-p-toluidinylnaphthalene-6-sulfonate as the fluorescent probe. The experimental data points, corresponding to the evolution of the concentration of "detectable" substrate with depolymerization time, were fit to a single exponential decay curve in the case of amylose and to a double exponential decay curve in the cases of amylopectin and soluble starch. For all the assayed substrates, the determined depolymerization rates at time zero correlated well with the initial enzyme and substrate concentrations through the usual Michaelis-Menten hyperbola. Therefore, this methodology allows the determination of alpha-amylase activity using any of these substrates. For amylopectin and soluble starch, the value of the total depolymerization rate at any depolymerization time was the result of the additive contribution of two partial depolymerization rates. In contrast, the total depolymerization rate for amylose was always a single value. These results, in conjunction with the relative time evolution of the two partial depolymerization rates (for amylopectin and soluble starch), are in good agreement with a linear molecular structure for amylose, a "grape-like" cluster molecular structure for amylopectin, and an extensively degraded grape-like cluster structure for soluble starch.     

Effect of the structure of alcohols on their binding by thermotropic gels of corn starch

Binding of alcohols by thermotropic gels of normal corn starch was studied using the method of capillary gas-liquid chromatography. The amount of the gel-bound substances depended linearly on their concentrations in the original gel. Binding of n-alcanols increased with the length of the alkyl chain, exhibiting a linear dependence. The binding was attenuated by the presence of double bonds-cyclic substituents in or branching of the carbon chain. Binding of alcohols by starch polysaccharides was more pronounced in thermotropic gels, as compared to cryotextured gels. Binding isotherms were indicatice of co-operative interactions, in which alcohols formed supromolecular structures with hydrated molecules of polysaccharides and inclusion complexes with amylose and side chains of amylopectin.     

Cross-linked amylose as matrix for drug controlled release. X-ray and FT-IR structural analysis

For cross-linked amylose (CLA) tablets prepared by direct compression, a linear increase in cross-linking degree (cld) defined as percentage of epichlorohydrin cross-linker/polymer, generates non-monotonous variation of drug release time. Controlled release (up to 20–24 h) properties were obtained only for tablets from CLA (Contramid^TM) with relatively low cld (CLA-2 up to CLA-6). Moderate increase in cld (CLA-15) generates a sharp decrease in the release time (2–6 h). This is a particular characteristic of the CLA matrix. The controlled release properties were related to the X-ray pattern of the dry CLA network. The increase in cld induces a transition from B-type (double helix) to a predominat V-type (single helix) and to more amorphous conformation of CLA powders. Furthermore, FT-IR data indicated low free water content at low cld. For low cross-linked CLA, chains are closely located and stabilized by HO groups involved in hydrogen bonding and thus more resistant to hydration and more appropriate for the control of drug release.     

A study of ordered structure in acid-modified tapioca starch by C CP/MAS solid-state NMR

Acid modification of tapioca starch earlier reported to increase the mechanical strength of tablets. The development of ordered structure (double helices) of these starches was monitored after equilibrating at 0.90 a_w (25 °C) using ¹³C CP/MAS NMR and X-ray diffraction. As the hydrolysis time increased, the intensity of the resonance for C1 and C4 amorphous fractions decreased while that for C1 and C4 double helix fractions increased. Relative crystallinity (%) obtained from ¹³C CP/MAS NMR and X-ray diffraction methods both increased sharply initially and then levelled off with hydrolysis time. The initial increase in relative double helix content and crystallinity was due to a hydrolytic destruction in the amorphous domain, retrogradation of the partially hydrolyzed amylose and crystallization of free amylopectin double helices. After 192 h, these two parameters were not significantly different (=0.05) indicating that the double helices that were not arranged into crystalline regions either had been hydrolyzed or crystallized.     

ON THE MOLECULAR STRUCTURE OF STARCH GRANULES

It is a problem how to fit the molecules of amylose and amylopectin into the ultrastructural apposition layers of starch granules which have a width of only 0.1μ. Stretched amylose chains with a length up to 1 μ can be ruled out. In addition to the proposal of Miihlethaler, who visualizes folded amylopectin chains, a model with a helical amylose chain is discussed. A helix with six glucose residues per turn would be compatible with the crystal lattice found by Kreger; and the disorder caused by this helix in the hexagonal lattice of the parallel side chains of the amylopectin would account for the low optical anisotropy of the starch granules as compared to the parallel β-polyglucosan chains in cellulose. The proposed model, fitted into the 0.1 μ apposition ring of the starch granule, shows tangential strata with a layer repeat of about 80 A and a radial chain lattice with the fibre period 10.6 A; i.e., it shows a combination of a lamellar and a fibrous structure.     

Consequences of antisense RNA inhibition of starch branching enzyme activity on properties of potato starch

Antisense constructs containing cDNAs for potato starch branching enzyme (SBE) were introduced into potato (Solanum tuberosum L.). A population of transgenic plants were generated in which tuber SBE activity was reduced by between 5 and 98% of control values. No significant differences in amylose content or amylopectin branch length profiles of transgenic tuber starches were observed as a function of tuber SBE activity. Starches obtained from low SBE activity plants showed elevated phosphorous content. ³¹P n.m.r. analysis showed that this was due to proportionate increases in both 3- and 6-linked starch phosphates. A consistent alteration in starch gelatinisation properties was only observed when the level of SBE activity was reduced to below ˜5% of that of control values. Starches from these low SBE activity plants showed increases of up to 5 °C in d.s.c. peak temperature and viscosity onset temperature. Studies on melting of crystallites obtained from linear (1 → 4)-- -glucan oligomers suggest that an average difference of double helix length of about one glucose residue might be sufficient to account for the observed differences in gelatinisation properties. We speculate that the modification of gelatinisation properties at low SBE activities is due to a subtle alteration in amylopectin branch patterns resulting in small changes in double helix lengths within granules.