Single nucleotide polymorphisms in the corticotrophin-releasing hormone and pro-opiomelancortin genes are associated with growth and carcass yield in beef cattle

A single nucleotide polymorphism (SNP) in the corticotrophin-releasing hormone gene (CRH C22G) alters the fourth amino acid in the signal sequence from proline to arginine. Two other SNPs (CRH A145G and C240G) occur in the propeptide region at residue positions 45 and 77, respectively, that result in serine/asparagine and histidine/aspartic acid substitutions respectively. These SNPs, as well as SNPs in pro-opiomelancortin (POMC), leptin (LEP) and melanocortin-4 receptor (MC4R), were evaluated for associations with average daily gain, end-of-test rib-eye area, shipping weight and hot carcass weight in a group of 256 steers using a general linear model. The CRH C22G SNP was associated with end-of-test rib-eye area (P < 0.034) and hot carcass weight (P < 0.0015). The SNP in POMC was associated with shipping weight (P < 0.0078) and hot carcass weight (P = 0.006) while it approached significance for average daily gain (P < 0.07). The SNP in MC4R approached significance for hot carcass weight (P < 0.085) while no significance was observed between the leptin SNP and the above listed traits. Because both CRH and POMC regulate appetite, potential interaction effects between these two genes were assessed. The absence of an interaction effect between CRH and POMC with hot carcass weight suggests that these genes act independently to increase carcass yield. These gene effects used singularly or together could result in an economic benefit to the beef industry.     

Real-time PCR genotyping and frequency of the myostatin F94L mutation in beef cattle breeds

This research developed two real-time PCR assays, employing high-resolution melt and allele-specific analysis to accurately genotype the F94L mutation in cattle. This mutation (g.433C > A) in the growth differentiation factor 8 or myostatin gene has recently been shown to be functionally associated with increased muscle mass and carcass yield in cattle. The F94L mutation is not, like other myostatin mutations, associated with reduced fertility and dystocia. It is therefore a candidate for introgression into other breeds to improve retail beef yield and the development of a simple and accurate test to genotype this specific mutation is warranted. Variations in the efficiency of enzyme cleavage compromised the accuracy of genotyping by published methods, potentially resulting in an overestimation of the frequency of the mutant allele. The frequency of the F94L mutation was determined by real-time PCR in 1140 animals from 15 breeds of cattle in Australia. The mutation was present in Simmental (0.8%), Piedmontese (2%), Droughtmaster (4%) and Limousin (94.2%) but not found in Salers, Angus, Poll Hereford, Hereford, Gelbvieh, Charolais, Jersey, Brahman, Holstein, Shorthorn or Maine Anjou. The low prevalence of F94L in all beef breeds except Limousin indicates the significant potential for this mutation to improve retail yield in Australian beef cattle.     

Mapping of quantitative trait loci for carcass traits in a Japanese Black (Wagyu) cattle population

To detect quantitative trait loci (QTL) that influence economically important traits in a purebred Japanese Black cattle population, we performed a preliminary genome-wide scan using 187 microsatellite markers across a paternal half-sib family composed of 258 offspring. We located six QTL at the 1% chromosome-wise level on bovine chromosomes (BTA) 4, 6, 13, 14 and 21. A second screen of these six QTL regions using 138 additional paternal offspring half-sib from the same sire, provided further support for five QTL: carcass weight on BTA14 (22-39 cM), one for rib thickness on BTA6 (27-58 cM) and three for beef marbling score (BMS) on BTA4 (59-67 cM), BTA6 (68-89 cM) and BTA21 (75-84 cM). The location of QTL for subcutaneous fat thickness on BTA13 was not supported by the second screen (P > 0.05). We determined that the combined contribution of the three QTLs for BMS was 10.1% of the total variance. The combined phenotypic average of these three Q was significantly different (P < 0.001) from those of other allele combinations. Analysis of additional half-sib families will be necessary to confirm these QTL.     

Effects of the Texel muscling quantitative trait locus on carcass traits in crossbred lambs

Texel muscling quantitative trait locus (TM-QTL) is a QTL on chromosome 18, originally identified in purebred UK Texel sheep, which was reported to increase ultrasonically measured muscle depth at the third lumbar vertebra by around 4% to 7%. The objective of the present study was to comprehensively evaluate the TM-QTL and to determine whether it could provide benefits to the UK sheep industry through increased carcass meat yield in crossbred slaughter lambs. Effects of this QTL on a range of carcass traits, including those measured in vivo and by dissection, were evaluated in heterozygous carrier and non-carrier lambs produced by crossing heterozygous carrier Texel rams with non-carrier Mule (Bluefaced Leicester × Scottish Blackface) ewes from a lowland flock. The TM-QTL was found to increase loin muscling in crossbred lambs at a given live weight or carcass weight, as measured by ultrasound, X-ray computed tomography (CT) and carcass dissection. Depth of M. longissimus lumborum (MLL) was greater in TM-QTL carrier lambs compared to non-carriers as measured by both ultrasound at the third lumbar vertebra (+4.5%; P = 0.033) and CT scanning at the fifth lumbar vertebra (+6.7%; P = 0.004). Width and area of MLL measured using CT were also greater in TM-QTL carrier lambs compared to non-carriers (+3.0%; P = 0.013 and +5.1%; P = 0.047, respectively). Loin muscle volume measured using CT was greater in TM-QTL carriers than in non-carriers (+5.9%; P = 0.005) and the dissected weight of the MLL was +7.1% greater in TM-QTL carriers compared to non-carriers (P < 0.001). The proportion of the total carcass lean meat yield (LMY) that was contained within the loin region was slightly higher in TM-QTL carriers than in non-carriers (0.154 v. 0.145; P = 0.006). However, TM-QTL was found to have no significant effect on the total weight or proportion of LMY or of saleable meat yield in the carcass measured by dissection, or on muscling in the hind leg measured by CT or dissection. This work has verified that the inheritance of TM-QTL is associated with increased loin muscling in crossbred lambs, as has previously been reported for purebred Texel lambs.     

Repercussions of growth path on carcass characteristics,meat colour and shear force in Alentejana bulls

The aim of this study was to evaluate the carcass and meat characteristics of eight muscles from bulls with distinct growth paths. A total of 40 Alentejana male calves were allocated to two distinct feeding regimes. In the continuous growth (CG) system, the animals were fed concentrates plus hay and were slaughtered at 18 months of age. On the other hand, in the discontinuous growth (DG) system, the animals were fed hay until 15 months of age; the cattle were then fed the same diet provided to the CG group from 15 to 24 months of age. The DG reduced hot carcass weight, fatness and dressing %, but the proportions of fat, bone and muscle tissues in the leg were not affected. In contrast, there was a positive impact of compensatory growth on supraspinatus, triceps brachii, semitendinosus, biceps femoris muscle tenderness, overcoming the negative effects of age at slaughter. The reasons for such improvement in meat tenderness were not related to intra-muscular fat content or myofibrillar protein degradation values. An association between tenderness and muscle collagen properties was not established. The results indicate that the compensatory growth has a muscle-dependent effect.     

Polymorphisms in the ovine myostatin gene (MSTN) and their association with growth and carcass traits in New Zealand Romney sheep

Myostatin is a regulator of myogenesis and has been implicated in the regulation of adiposity and in controlling the structure and function of tendons. Polymerase Chain Reaction Single-Stranded Conformational Polymorphism (PCR-SSCP) analysis of intron-1 was used to identify five variants (designated A-E) of the myostatin gene ( MSTN ). The effect of this genetic variation on growth and carcass traits was investigated in 517 Romney male lambs from 17 sire-lines, born on a South Island New Zealand farm. General linear mixed effect models revealed that the presence of allele A in a lamb's genotype was associated with decreased leg, loin and total yield of lean meat, whereas the presence of allele B was associated with increased loin yield and proportion loin yield (loin yield divided by total yield expressed as percentage). The effect of the number of allele copies present was investigated, and it was found that the absence of A , or the presence of two copies of B , was associated with increased mean leg yield, loin yield and total yield. Two copies of B were also associated with a decrease in proportion of shoulder yield, whereas two copies of A were associated with a decrease in proportion of loin yield. Associations with allele C were not detected. No associations of MSTN variation with birth weight, weaning weight, pre-weaning growth rate, draft age and hot carcass weight (H-W) were detected. These results suggest that variation in ovine MSTN is associated with meat production, but not birth weight or growth rate in New Zealand Romney sheep.     

Genomic selection using beef commercial carcass phenotypes

In this study, an industry terminal breeding goal was used in a deterministic simulation, using selection index methodology, to predict genetic gain in a beef population modelled on the UK pedigree Limousin, when using genomic selection (GS) and incorporating phenotype information from novel commercial carcass traits. The effect of genotype–environment interaction was investigated by including the model variations of the genetic correlation between purebred and commercial cross-bred performance (ρ_X). Three genomic scenarios were considered: (1) genomic breeding values (GBV)+estimated breeding values (EBV) for existing selection traits; (2) GBV for three novel commercial carcass traits+EBV in existing traits; and (3) GBV for novel and existing traits plus EBV for existing traits. Each of the three scenarios was simulated for a range of training population (TP) sizes and with three values of ρ_X. Scenarios 2 and 3 predicted substantially higher percentage increases over current selection than Scenario 1. A TP of 2000 sires, each with 20 commercial progeny with carcass phenotypes, and assuming a ρ_X of 0.7, is predicted to increase gain by 40% over current selection in Scenario 3. The percentage increase in gain over current selection increased with decreasing ρ_X; however, the effect of varying ρ_X was reduced at high TP sizes for Scenarios 2 and 3. A further non-genomic scenario (4) was considered simulating a conventional population-wide progeny test using EBV only. With 20 commercial cross-bred progenies per sire, similar gain was predicted to Scenario 3 with TP=5000 and ρ_X=1.0. The range of increases in genetic gain predicted for terminal traits when using GS are of similar magnitude to those observed after the implementation of BLUP technology in the United Kingdom. It is concluded that implementation of GS in a terminal sire breeding goal, using purebred phenotypes alone, will be sub-optimal compared with the inclusion of novel commercial carcass phenotypes in genomic evaluations.     

Associations between the 11-bp deletion in the myostatin gene and carcass quality in Angus-sired cattle

An 11-bp deletion in the bovine myostatin ( MSTN ) gene was identified as the causative mutation for the double-muscling phenotype in Belgian Blue and Asturiana cattle. More recently, this mutation was also identified in the South Devon breed of cattle, in which it has been found to be associated with a general increase in muscle mass. The present study found that the mutant allele was also segregating in a commercial population of Scottish Aberdeen Angus beef cattle. The mutation was found at a low frequency (0.04) with no animals homozygous for the mutation in the sample population (536 animals). The effects of this mutation on various carcass traits of economic interest were then tested. We found that the mutation significantly increased carcass weight, sirloin weight, hindquarter weight, muscle conformation score and eye muscle area, but had no effect on the fat traits.     

Muscle-related traits in cattle: The role of the myostatin gene in the South Devon breed

In this paper, we examined the effects of an 11-bp mutation within the GDF-8 gene, originally identified in Belgian Blue cattle, in the South Devon breed. The mutation was found at moderate frequency (0.37) in the South Devon population. We quantified the effects of this mutation on growth, body composition and calving traits in South Devon cattle. We found that the mutation significantly increased muscle score and calving difficulty and decreased fat depth. The mutation did not significantly affect weight at 200 and 400 days or muscle depth. Its effect on muscle score and fat depth was additive while its effect on calving difficulty was recessive. The mutation accounted for a significant proportion of the phenotypic variance in muscle score and calving difficulty. There was an economic benefit of the mutation for this data set, however, calculations were sensitive to changes in the parameter values. Additional data would be required to refine these calculations.     

Inferring the recent ancestry of myostatin alleles affecting muscle mass in cattle

Double muscling is an inherited condition in cattle characterised by large increases in muscle mass. Mutations in the myostatin (MSTN) gene, responsible for double muscling, were targeted in this study to estimate the time since the most recent common ancestor (TMRCA) for Q204X (p.Gln204*), E226X (p.Glu226*), 821del11 (c.821del11), E291X (p.Glu291*), C313Y (p.Cys313Tyr) and the more phenotypically moderate F94L (p.Phe94Leu) mutation. Genetic variability was examined in eight regions upstream and downstream of the MSTN locus. The molecular distance of the homozygous region associated with each MSTN allele was used to estimate the TMRCA. Long homozygous segments were associated with the MSTN alleles (mostly > 2 Mb), compared to short segments (130 kb) for cattle wild type at the double muscling and F94L sites. Estimates of time indicated that each MSTN allele had a recent common ancestor (<400 years ago). The results from this study, and the increasing frequency of these MSTN alleles in some cattle breeds, demonstrate recent positive selection.     

Effects of polymorphic microsatellites in the regulatory region of IGF1 and GHR on growth and carcass traits in beef cattle

Growth hormone (GH), insulin-like growth factors 1 and 2 (IGF1 and IGF2) and their associated binding proteins and transmembrane receptors (GHR, IGF1R and IGF2R) play an important role in the physiology of mammalian growth. The objectives of the present study were to estimate the allele and genotype frequencies of microsatellite markers located in the 5'-regulatory region of the IGF1 and GHR genes in beef cattle belonging to different genetic groups and to determine effects of these markers on growth and carcass traits in these animals under an intensive production system. For this purpose, genotyping was performed on 384 bulls including 79 Nellore, 30 Canchim (5/8 Charolais + 3/8 Zebu) and 275 crossbred animals originating from crosses of Simmental (1/2 Simmental, n = 30) and Angus (1/2 Angus, n = 245) sires with Nellore females. The effects of substituting L allele for S allele of GHR microsatellite across Nellore, Canchim and 1/2 Angus were significant for weight gain and body weight (P < 0.05). The IGF1 microsatellite allele substitutions of 229 for 225 within Nellore group and of 225 for 229 within 1/2 Angus were not significant for any of the traits.     

The effect of floor type on the performance,cleanliness, carcass characteristics and meat quality of dairy origin bulls

The aim of this study was to evaluate the effect of using different floor types to accommodate growing and finishing beef cattle on their performance, cleanliness, carcass characteristics and meat quality. In total, 80 dairy origin young bulls (mean initial live weight 224 kg (SD=28.4 kg)) were divided into 20 blocks with four animals each according to live weight. The total duration of the experimental period was 204 days. The first 101 days was defined as the growing period, with the remainder of the study defined as the finishing period. Cattle were randomly assigned within blocks to one of four floor type treatments, which included fully slatted flooring throughout the entire experimental period (CS); fully slatted flooring covered with rubber strips throughout the entire experimental period (RS); fully slatted flooring during the growing period and moved to a solid floor covered with straw bedding during the finishing period (CS-S) and fully slatted flooring during the growing period and moved to fully slatted flooring covered with rubber strips during the finishing period (CS-RS). Bulls were offered ad libitum grass silage supplemented with concentrates during the growing period. During the finishing period, bulls were offered concentrates supplemented with chopped barley straw. There was no significant effect of floor type on total dry matter intake (DMI), feed conversion ratio, daily live weight gain or back fat depth during the growing and finishing periods. Compared with bulls accommodated on CS, RS and CS-RS, bulls accommodated on CS-S had a significantly lower straw DMI (P<0.01). Although bulls accommodated on CS and CS-S were significantly dirtier compared with those accommodated on RS and CS-RS on days 50 (P<0.05) and 151 (P<0.01), there was no effect of floor type on the cleanliness of bulls at the end of the growing and finishing periods. There was also no significant effect of floor type on carcass characteristics or meat quality. However, bulls accommodated on CS-S had a tendency for less channel, cod and kidney fat (P=0.084) compared with those accommodated on CS, RS and CS-RS. Overall, floor type had no effect on the performance, cleanliness, carcass characteristics or meat quality of growing or finishing beef cattle.     

丙酸通路基因多态性与猪肉质及胴体性状的关联分析

为了挖掘新的猪肉品质及胴体性状的候选基因,揭示猪肉质及胴体性状的遗传机制,文章将丙酸代谢通路作为候选通路,将通路内基因与猪肉质及胴体性状进行关联分析。实验采用37头三元杂交商品猪作为研究对象,首次针对丙酸通路中7个基因的36个SNP位点利用SNaPshot方法进行基因分型,分别用最小二乘模型及MB-MDR模型与肉质及胴体性状进行关联分析。结果发现,基因PCCB、MUT、MCEE及ACSS2上的4个SNP位点分别与肌内脂肪含量、背膘厚等性状显著相关(P<0.05),ACSS2与猪脂肪含量显著相关;MCEE及MUT与猪的背膘厚显著相关;PCCB基因与脂重显著相关。通过MB-MDR方法检测到多个SNP位点具有互作效应,并与背膘厚、水分含量、脂肪含量显著相关(P<0.05)。另外,丙酸代谢通路中的基因间的互作效应对猪肉品质有显著影响。     

Accuracy of predicting genomic breeding values for carcass merit traits in Angus and Charolais beef cattle

Accuracy of predicting genomic breeding values for carcass merit traits including hot carcass weight, longissimus muscle area (REA), carcass average backfat thickness (AFAT), lean meat yield (LMY) and carcass marbling score (CMAR) was evaluated based on 543 Angus and 400 Charolais steers genotyped on the Illumina BovineSNP50 Beadchip. For the genomic prediction within Angus, the average accuracy was 0.35 with a range from 0.32 (LMY) to 0.37 (CMAR) across different training/validation data‐splitting strategies and statistical methods. The within‐breed genomic prediction for Charolais yielded an average accuracy of 0.36 with a range from 0.24 (REA) to 0.46 (AFAT). The across‐breed prediction had the lowest accuracy, which was on average near zero. When the data from the two breeds were combined to predict the breeding values of either breed, the prediction accuracy averaged 0.35 for Angus with a range from 0.33 (REA) to 0.39 (CMAR) and averaged 0.33 for Charolais with a range from 0.18 (REA) to 0.46 (AFAT). The prediction accuracy was slightly higher on average when the data were split by animal's birth year than when the data were split by sire family. These results demonstrate that the genetic relationship or relatedness of selection candidates with the training population has a great impact on the accuracy of predicting genomic breeding values under the density of the marker panel used in this study.     

Prediction of physical characteristics of the lamb carcass using in vivo bioimpedance analysis

The increase of sheep meat competitiveness in international markets can be attributed to the rise of the quantity and the improvement of the quality of the edible portion of sheep carcasses. Usually, carcass yield is established after the slaughter of the animals. Yet, when carcass yield is determined in vivo, it can be both a costly and subjective method. This study proposes models for predicting the physical characteristics of lamb carcass using bioimpedance analysis (BIA) in live animals. Thirty-one Texel × Ile de France crossbreed ram lambs were slaughtered at 20, 26, 32 or 38 kg of BW. Before the slaughter, values of resistance (Rs) and reactance (Xc) were collected using a single-frequency BIA equipment (Model RJL Quantum II Bioelectrical Body Composition Analyzer). Then, BIA main variables such as body bioelectrical volume (V), phase angle (PA), resistive density (RsD) and reactive density (XcD) were calculated. After slaughter, cold carcass weight (CCW), cold carcass yield (CCY), subcutaneous fat thickness (SFT), soft tissue weight (STW) and soft tissue yield (STY) were also measured. Multiple regression analyses were carried out using the physical characteristics as dependent variables and the bioimpedance values as independent variables. Predictive performance of the models was assessed using leave-one-out cross-validation. The prediction model of CCW was obtained using the V, PA and RsD (R² = 0.97), STW through the V, RsD and XcD (R² = 0.97), CCY by Rs, Z and XcD (R² = 0.69), STY by V and XcD (R² = 0.67), and SFT only for XcD (R² = 0.84). The results indicated that BIA has the potential to predict carcass characteristics of lambs at different body masses.     

Intake, growth and carcass traits in male progeny of sires differing in genetic merit for beef production

Validation of economic indexes under a controlled experimental environment, can aid in their acceptance and use as breeding tools to increase herd profitability. The objective of this study was to compare intake, growth and carcass traits in bull and steer progeny of high and low ranking sires, for genetic merit in an economic index. The Beef Carcass Index (BCI; expressed in euro (€) and based on weaning weight, feed intake, carcass weight, carcass conformation and fat scores) was generated by the Irish Cattle Breeding Federation as a tool to compare animals on genetic merit for the expected profitability of their progeny at slaughter. A total of 107 male suckler herd progeny, from 22 late-maturing 'continental' beef sires of high (n = 11) or low (n = 11) BCI were compared under either a bull or steer production system, and slaughtered at approximately 16 and 24 months of age, respectively. All progeny were purchased after weaning at approximately 6 to 8 months of age. Dry matter (DM) intake and live-weight gain in steer progeny offered grazed grass or grass silage alone, did not differ between the two genetic groups. Similarly, DM intake and feed efficiency did not differ between genetic groups during an ad libitum concentrate-finishing period on either production system. Carcasses of progeny of high BCI sires were 14 kg heavier (P < 0.05) than those of low BCI sires. In a series of regression analyses, increasing sire BCI resulted in increases in carcass weight (P < 0.01) and carcass conformation (P = 0.051) scores, and decreases in carcass fat (P < 0.001) scores, but had no effect on weaning weight or DM intake of the progeny. Each unit increase in sire expected progeny difference led to an increase in progeny weaning weight, DM intake, carcass weight, carcass conformation score and carcass fat score of 1.0 (s.e. = 0.53) kg, 1.1 (s.e. = 0.32) kg, 1.3 (s.e. = 0.31) kg, 0.9 (s.e. = 0.32; scale 1 to 15) and 1.0 (s.e. = 0.25; scale 1 to 15), respectively, none of which differed from the theoretical expectation of unity. The expected difference in profitability at slaughter between progeny of the high and low BCI sires was €42, whereas the observed phenotypic profit differential of the progeny was €53 in favour of the high BCI sires. Results from this study indicate that the BCI is a useful tool in the selection of genetically superior sires, and that actual progeny performance under the conditions of this study is within expectations for both bull and steer beef production systems.