Immobilization and biocatalytic activity of fungal protease on gold nanoparticle-loaded zeolite microspheres

Gold nanoparticles are excellent biocompatible surfaces for the immobilization of enzymes. However, separation of the gold nanoparticle-enzyme bioconjugate material from the reaction medium is often difficult. In this study, we investigate the assembly of the gold nanoparticles on the surface of the amine-functionalized zeolite microspheres in the formation of zeolite-gold nanoparticle "core-shell" structures and, thereafter, the use of this structure in immobilization of fungal protease. The assembly of gold nanoparticles on the zeolite surface occurs through the amine groups present in 3-aminopropyltrimethoxysilane (3-APTS). The fungal proteases bound to the massive "core-shell" structures were easily separated from the reaction medium by mild centrifugation and exhibited excellent reuse characteristics. The biocatalytic activity of fungal protease in the bioconjugate was marginally enhanced relative to the free enzyme in solution. The bioconjugate material also showed significantly enhanced pH and temperature stability and a shift in the optimum temperature of operation.     

A bioconjugate of Pseudomonas cepacia lipase with alginate with enhanced catalytic efficiency

A bioconjugate of Pseudomonas cepacia lipase with alginate was prepared by simple adsorption. Atomic force microscope (AFM) images showed that this bioconjugate resulted from adsorption rather than entrapment of the enzyme as enzyme molecules were visible on the gel surface. The soluble bioconjugate exhibited increased enzyme activity in terms of high effectiveness factor (effectiveness factor was 3 for the immobilized preparation) and greater Vmax/Km value (Vmax/Km increased 25 times upon immobilization). This constitutes one of the less frequently observed instances of lipase activation by lid opening as a result of binding to a predominantly hydrophilic molecule. The bioconjugate was also more stable at 55 degrees C as compared to the free enzyme and could be reused for oil hydrolysis up to 4 cycles without any loss in activity. Fluorescence emission spectroscopy showed that the immobilized enzyme had undergone definite conformational changes.     

A smart bioconjugate of alginate and pectinase with unusual biological activity toward chitosan

The commercial preparation of pectinase (Pectinex Ultra SP-L) was conjugated to alginate by noncovalent interactions by employing 1% alginate during the conjugation protocol. The optimum "immobilization efficiency" was 0.76. The pH optimum and the thermal stability of the enzyme remained unchanged upon conjugation with alginate. The soluble bioconjugate showed a 3-fold increase in V(max)/K(m) as compared to the free enzyme when the smart biocatalyst was used for chitosan hydrolysis. Time course hydrolysis of chitosan thus showed higher conversion of chitosan into reducing oligosaccharides/sugars. The smart bioconjugate could be reused five times without any detectable loss of chitosanase activity.     

Refolding of a denatured α-chymotrypsin and its smart bioconjugate by three-phase partitioning

-Chymotrypsin inactivated with 8 M urea and 100 mM dithiothreitol could be completely reactivated by subjecting it to three-phase partitioning (TPP). TPP consisted of adding 30% w/v ammonium sulfate and t-butanol (volume equivalent to aqueous solution of denatured -chymotrypsin) at 25°C. The activated -chymotrypsin was recovered as an interfacial precipitate between the upper organic and lower aqueous phase. It was found that this could be extended to a thermally inactivated smart bioconjugate of -chymotrypsin with Eudragit S-100 (a reversibly soluble-insoluble methmethacrylate). The thermally inactivated bioconjugate had to be further subjected to urea and dithiothreitol before refolding by three-phase partitioning. Ninety per cent of the activity of the bioconjugate could be recovered. The free enzyme and its bioconjugate which lost activity in the presence of 90% dioxane recovered 94 and 90% of their activities, respectively, by employing TPP. The refolded free enzyme and its bioconjugate were evaluated in terms of V _max/K _m and their fluorescence emission spectra.     

PEGylated recombinant L-asparaginase from <Emphasis Type="Italic">Erwinia carotovora</Emphasis>: Production,properties, and potential applications

N-hydroxysuccinimide ester of monomethoxy polyethylene glycol hemisuccinate was synthesized. It acylated amino groups in a molecule of recombinant L-asparaginase from Erwinia carotovora. A method of L-asparaginase modification by the obtained activated polyethylene glycol derivative was developed. The best results were produced by modification of the enzyme with a 25-fold excess of reagent relative to the enzyme tetramer. The modified L-asparaginase was isolated from the reaction mixture by gel filtration on Sepharose CL-6B. The purified bioconjugate did not contain PEG unbound to the protein, demonstrated high catalytic activity, and exhibited antiproliferative action on cell cultures.     

A smart bioconjugate of chymotrypsin

alpha-Chymotrypsin was immobilized on Eudragit S-100 via covalent coupling with 93% retention of proteolytic activity. The conjugate behaved as a smart biocatalyst and functioned as a pH-dependent reversibly soluble-insoluble biocatalyst. The pH optimum of chymotrypsin broadened on immobilization, and the immobilized preparation showed better stability at and above pH 6.5 as compared to the free enzyme. The immobilized enzyme showed a slight shift in the temperature optimum and enhanced thermal stability retaining 70% of its original activity after 1 h of exposure to 40 degrees C as compared to the 25% residual activity for the free enzyme under identical conditions. K(m) and V(max) values did not change on immobilization. Also, the immobilized preparation was quite stable to reuse, it retained almost 85% of its original activity even after a fifth precipitation cycle. UV spectroscopy and circular dichroism were used to probe structural changes in the enzyme upon immobilization.     

Characteristics of immobilized lipase on hydrophobic superparamagnetic microspheres to catalyze esterification

A novel immobilized lipase (from Candida rugosa) on hydrophobic and superparamagnetic microspheres was prepared and used as a biocatalyst to catalyze esterification reactions in diverse solvents and reaction systems. The results showed that the immobilized lipase had over 2-fold higher activities in higher log P value solvents. An exponential increase of lipase activity against log P of two miscible solvent mixtures was observed for the first time. Both free and immobilized lipase achieved its maximum activity at the range of water activity (a(w)) 0.5-0.8 or higher. At a(w) 0.6, the immobilized lipase exhibited markedly higher activities in heptane and a solvent-free system than did the native lipase. In multicompetitive reactions, the alcohol specificity of the lipase showed a strong chain-length dependency, and the immobilized enzyme exhibited more preference for a longer-chain alcohol, which is different from previous reports. The immobilized lipase showed higher specificities for butyric acid and the medium-chain-length fatty acids (C(8)-C(12)). Then, the immobilized lipase was extended to solvent-free synthesis of glycerides from glycerol and fatty acids. Recovered by magnetic separation, the immobilized lipase exhibited good reusability in repeated batch reaction, indicating its promising feature for biotechnology application.     

Preparation of new lipases derivatives with high activity–stability in anhydrous media: adsorption on hydrophobic supports plus hydrophilization with polyethylenimine

A novel method to prepare immobilized lipases derivatives is hereby proposed. Lipases are firstly adsorbed on supports having large internal surfaces covered by hydrophobic groups (e.g. polyacrylic resins covered by C18 moieties). Then, immobilized lipases are incubated in the presence of polyethyleneimine (PEI) at a pH value over the isoelectric point of the enzyme in order to cover the lipase surface with this polymer. In this way, we try to minimize all possible direct interactions between immobilized lipase and organic solvents when using these derivatives in anhydrous media.

Lipases from Rhizomucor miehie (RML) and Candida rugosa (CRL) were immobilized according to the proposed protocol. These derivatives were very active and very stable when catalyzing esterifications and transesterifications in anhydrous media. For example, RML derivatives exhibited a very high synthetic activity (more than 1000 Units/g immobilized biocatalyst) even when catalyzing the esterification of lauric acid with octanol at water activity values very close to zero. On the contrary, covalently immobilized derivatives exhibited a much lower synthetic activity under similar conditions (less than 10 Units/g of immobilized biocatalyst). Moreover, these new RML derivatives preserve 100% activity after incubation for 3 days in anhydrous butanone in the presence of molecular sieves. Under the same conditions, commercial immobilized RML lost more than 90% of activity in less than 10 min.     

Synthesisof fructose laurate esters catalyzed by a CALB-displaying Pichia pastoris whole-cell biocatalyst in a non-aqueous system

Earlier studies on fructose laurate ester products have shown that recombinant Pichia pastoris displaying Candida antarctica lipase B (CALB) on the cell surface acts as an efficient whole-cell biocatalyst for sugar ester production from fructose and lauric acid in an organic solvent. The effects of various reaction factors, including solvent composition, substrate molar ratio, enzyme dose, temperature and water activity, on esterification catalyzed by the CALB-displaying P. pastoris whole-cell biocatalyst were examined in the present study. Under the preferred reaction conditions, specifically, 5 mL organic solvent mixture of 2-methyl-2-butanol/DMSO (20% v/v), 2 mmol fructose with a lauric acid to fructose molar ratio of 2:1, 0.3 g whole-cell biocatalyst (1,264 U/g dry cell) with an initial water activity of 0.11, 1.2 g 4Å molecular sieve, reaction temperature of 55oC and 200 rpm stirring speed, the fructose mono laurate ester yield was 78% (w/w). The CALBdisplaying P. pastoris whole-cell biocatalyst exhibited good operational stability, with an evident increase, rather than decrease, in relative activity after the continuous recover and reuse cycle. The relative activity of the biocatalyst remained 50% higher than that of the first batch, even following reuse for 15 batches. Our results collectively indicate that the CALB-displaying P. pastoris whole-cell biocatalyst may be potentially utilized in lieu of free or immobilized enzyme to effectively produce non-ionic surfactants such as fatty acid sugar esters, offering the significant advantages of cost-effectiveness, good operational stability and mild reaction conditions.

     

Enhancing the reusability of endoglucanase-gold nanoparticle bioconjugates by tethering to polyurethane microspheres

The synthesis of polyurethane microsphere-gold nanoparticle "core-shell" structures and their use in the immobilization of the enzyme endoglucanase are described. Assembly of gold nanoparticles on the surface of polymer microspheres occurs through interaction of the nitrogens in the polymer with the nanoparticles, thereby precluding the need for modifying the polymer microspheres to enable such nanoparticle binding. Endoglucanse could thereafter be bound to the gold nanoparticles decorating the polyurethane microspheres, leading to a highly stable biocatalyst with excellent reuse characteristics. The immobilized enzyme retains its biocatalytic activity and exhibits improved thermal stability relative to free enzyme in solution. The high surface area of the host gold nanoparticles renders the immobilized enzyme "quasi free", while at the same time retaining advantages of immobilization such as ease of reuse, enhanced temporal and thermal stability, etc.     

Refolding of a denatured α-chymotrypsin and its smart bioconjugate by three-phase partitioning

α-Chymotrypsin inactivated with 8 M urea and 100 mM dithiothreitol could be completely reactivated by subjecting it to three-phase partitioning (TPP). TPP consisted of adding 30% w/v ammonium sulfate and t-butanol (volume equivalent to aqueous solution of denatured α-chymotrypsin) at 25°C. The activated α-chymotrypsin was recovered as an interfacial precipitate between the upper organic and lower aqueous phase. It was found that this could be extended to a thermally inactivated smart bioconjugate of α-chymotrypsin with Eudragit S-100 (a reversibly soluble–insoluble methmethacrylate). The thermally inactivated bioconjugate had to be further subjected to urea and dithiothreitol before refolding by three-phase partitioning. Ninety per cent of the activity of the bioconjugate could be recovered. The free enzyme and its bioconjugate which lost activity in the presence of 90% dioxane recovered 94 and 90% of their activities, respectively, by employing TPP. The refolded free enzyme and its bioconjugate were evaluated in terms of V_max/K_m and their fluorescence emission spectra.     

Testing for diffusion limitations in salt-activated enzyme catalysts operating in organic solvents

The dramatic activation of serine proteases in nonaqueous media resulting from lyophilization in the presence of KCl is shown to be unrelated to relaxation of potential substrate diffusional limitations. Specifically, lyophilizing subtilisin Carlsberg in the presence of KCl and phosphate buffer in different proportions, ranging from 99% (w/w) enzyme to 1% (w/w) enzyme in the final lyophilized solids, resulted in biocatalyst preparations that were not influenced by substrate diffusion. This result was made evident through use of a classical analysis whereby initial catalytic rates, normalized per weight of total enzyme in the catalyst material, were measured as a function of active enzyme for biocatalyst preparations containing different ratios of active to inactive enzyme. The active enzyme content of a given biocatalyst preparation was controlled by mixing native subtilisin with subtilisin preinactivated with PMSF, a serine protease inhibitor, and lyophilizing the enzyme mixture in the presence of different fractions of KCl and phosphate buffer. Plots of initial reaction rates as a function of percent active subtilisin in the biocatalyst were linear for all biocatalyst preparations. Thus, enzyme activation (reported elsewhere to be as high as 3750-fold in hexane for the transesterification of N-Ac-L-Phe-OEt with n-PrOH) is a manifestation of intrinsic enzyme activation and not relaxation of diffusional limitations resulting from diluted enzyme preparations. Similar activation is reported herein for thermolysin, a nonserine protease, thereby demonstrating that enzyme activation due to lyophilization in the presence of KCl may be a general phenomenon for proteolytic enzymes.     

Immobilization of dextransucrase from Leuconostoc mesenteroides NRRL B-512F on Eupergit C supports

Dextransucrase from Leuconostoc mesenteroides B-512F was immobilized on epoxy-activated acrylic polymers with different textural properties (Eupergit C and Eupergit C 250L). Prior to immobilization, dextransucrase was treated with dextranase to remove the dextran layer covering the enzyme surface, thus increasing the accessibility of its reactive groups to the epoxide centers of the support. Elimination of 99% of the initial carbohydrate content was determined by the anthrone method. To prevent enzyme inactivation, the immobilization was carried out at pH 5.4, at which the coupling to the support took place through the carboxylic groups of the enzyme. The effects of the amount (mg) of dextransucrase added per gram of support (from 0.2:1 to 30:1), temperature and contact time were studied. Maximum activity recovery of 22% was achieved using Eupergit C 250L. Using this macroporous support, the maximum specific activity (710 U/g biocatalyst) was significantly higher than that obtained with the less porous Eupergit C (226 U/g biocatalyst). The dextransucrase immobilized on Eupergit C 250L showed similar optimal temperature (30 degrees C) and pH (5-6) compared with the native enzyme. In contrast, a notable stabilization effect at 30 degrees C was observed as a consequence of immobilization. After a fast partial inactivation, the dextransucrase immobilized on Eupergit C 250L maintained more than 40% of the initial activity over the following 2 days. The features of this immobilized system are very attractive for its application in batch and fixed-bed bioreactors.     

Chemical modification of lactase for immobilization on carboxylic acid-functionalized microspheres

Abstract

Surface interactions between an enzyme and support influence the retention of activity after immobilization. Chemical modification of enzymes prior to immobilization may be used to alter these interactions and enhance activity retention. Lactase (A. oryzae) was covalently conjugated to P(S/V-COOH) microspheres, with surface carboxylic acid densities of 9 μeq/g and 137 μeq/g, using carbodiimide chemistry. Under optimum pH and temperature conditions, activity retention was greater when the enzyme was conjugated to microspheres containing a lower density of surface carboxylic acid groups (32% activity retention) than when the enzyme was conjugated to microspheres having a greater density of surface carboxylic acid groups (11% activity retention). Chemical modification of lactase carboxylic acid groups with glucosamine prior to immobilization was evaluated as a means to increase activity retention. Under optimal conditions, modification resulted in a 17% decrease in soluble enzyme activity compared to the native enzyme. However, immobilization of the modified enzyme yielded 85% and 64% activity retention after conjugation to microspheres with a lower and higher density of surface carboxylic acid groups, respectively. The results suggest that increases in surface carboxylic acid density on the carrier promote the loss of lactase activity after immobilization, and chemical modification of the enzyme with glucosamine provides a means to retain catalytic activity after attachment to these supports.     

Isolation,identification and characterization of <Emphasis Type="Italic">Bacillus subtilis</Emphasis> ZJB-063, a versatile nitrile-converting bacterium

Strain ZJB-063, a versatile nitrile-amide-degrading strain, was newly isolated from soil in this study. Based on morphology, physiological tests, Biolog and the 16S rDNA sequence, strain ZJB-063 was identified as Bacillus subtilis. ZJB-063 exhibited nitrilase activity without addition of inducers, indicating that the nitrilase in B. subtilis ZJB-063 is constitutive. Interestingly, the strain exhibited nitrile hydratase and amidase activity with the addition of ɛ-caprolactam. Moreover, the substrate spectrum altered with the alteration of enzyme systems due to the addition of ɛ-caprolactam. The constitutive nitrilase was highly specific for arylacetonitriles, while the nitrile hydratase/amidase in B. subtilis ZJB-063 could not only hydrolyze arylacetonitriles but also other nitriles including some aliphatic nitriles and heterocyclic nitriles. Despite comparatively low activity, the amidase of hydratase/amidase system was effective in converting amides to acids. The versatility of this strain in the hydrolysis of various nitriles and amides makes it a potential biocatalyst in organic synthesis.     

Mandelic acid chiral separation utilizing a two-phase partitioning bioreactor built by polysulfone microspheres and immobilized enzymes

A novel two-phase partitioning bioreactor (TPPB) modified by polysulfone (PSF) microspheres and immobilized enzyme (novozym-435) was formed, and the resulting TPPB was applied into mandelic acid chiral separation. The PSF microspheres containing n-hexanol (named PSF/hexanol microspheres) was prepared by using the phase inversion method, which was used as the organic phase. Meanwhile, the immobilized enzyme novozym-435 was used as a biocatalyst. The water phase was composed of the phosphate buffer solution (PBS). (R, S)-Methyl mandelate was selected as the substrate to study enzymatic properties. Different reaction factors have been researched, such as pH, reaction time, temperature and the quantity of biocatalyst and PSF/hexanol microspheres added in. Finally, (S)-mandelic acid was obtained with an 80 % optical purity after 24 h in the two-phase partitioning bioreactor. The enantiomeric excess (ee_p) values were very low in the water phase, in which the highest ee_p value was only 46 %. The ee_p of the two-phase partitioning bioreactor had been enhanced more obviously than that catalyzed in the water phase.     

Immobilization of glucose oxidase onto gold nanoparticles with enhanced thermostability

Immobilized proteins and enzymes were widely investigated in medical field as well as in food and environmental fields. In this paper, glucose oxidase (GOD) monolayer was covalently immobilized on the surface of gold nanoparticles (AuNPs) to fabricate bioconjugate complex. The citrate-stabilized AuNPs were first functionalized by a carboxyl-terminated alkanethiol and the terminal carboxyl groups were subsequently bonded with side-chain amino groups of protein surface through EDC/NHS coupling reaction. The enzyme activity assays of the obtained bioconjugates display an enhanced thermostability and similar pH-dependence behavior in contrast with that of free enzyme. Such GOD/AuNPs bioconjugates can be considered as a catalytic nanodevice to construct nanoreactor based on glucose oxidation reaction for biotechnological purpose.     

Efficient immobilization of epoxide hydrolase onto silica gel and use in the enantioselective hydrolysis of racemic para-nitrostyrene oxide

Epoxide hydrolase from Aspergillus niger (E.C. 3.3.2.3) was immobilized by covalent linking to epoxide-activated silica gel under mild conditions. A very easy procedure allowed to prepare an immobilized biocatalyst with more than 90% retention of the initial enzymatic activity. Immobilized and free enzyme showed very similar behaviour with respect to the effect of pH on activity and stability. One benefit of immobilizing epoxide hydrolase from A. niger on silica gel was the enhanced enzyme stability in the presence of 20% DMSO. The kinetic resolution of racemic para-nitrostyrene oxide was investigated by using this new immobilized biocatalyst. The enantioselectivity of the enzyme was not altered by the immobilization reaction: both unreacted epoxide and formed diol were obtained with very high ee (99 and 92%, respectively). In addition, the biocatalyst could be easily separated from the reaction mixture and re-used for over nine cycles without any noticeable loss of enzymatic activity or change in the enantioselectivity extent. The activity of immobilized AnEH was retained for several months.     

Covalent immobilization of Kluyveromyces fragilis β-galactosidase on magnetic nanosized epoxy support for synthesis of galacto-oligosaccharide

The novel magnetic nanobeads with epoxy groups on the surface were prepared from glycidyl methacrylate (GMA), ethylene glycol dimethacrylate (EGDMA) and hydroxyethyl methacrylate (HEMA) via emulsifier-free emulsion polymerisation, and they were characterized by scanning electron microscopy and vibrating sample magnetometer. The magnetic poly(GMA-EDGMA-HEMA) nanobeads were used as support for covalent immobilization of Kluyveromyces fragilis β-galactosidase, the maximum amount enzyme attached onto the support was 145.6?mg/g with activity recovery of 72.6%. The loading capacity of this novel support for K. fragilis β-galactosidase was improved 2.6-folds compared with Eupergit(?) C (commercial epoxy support). The immobilized K. fragilis β-galactosidase exhibited high catalytic activity for the reaction of galacto-oligosaccharide (GOS) synthesis, and a total of 2,240?g GOS were produced per gram of immobilized enzyme during consecutive batch reaction of 10 times. The immobilized biocatalyst retained 81.5% of its original activity after 10 reaction cycles.     

Stabilization of a tetrameric enzyme (α-amino acid ester hydrolase from Acetobacter turbidans) enables a very improved performance of ampicillin synthesis

The stabilized derivative of the enzyme α-amino acid ester hydrolase from Acetobacter turbidans has been found to be very adequate as biocatalyst of the synthesis of the very relevant antibiotic ampicillin. This enzyme resulted much more adequate than the Penicillin G Acylase (PGA) from Escherichia coli (the most used enzyme). The stabilization of the enzyme was required because under optimal conditions (absence of phosphate and 40% of MeOH), no-stabilized derivatives or soluble enzyme from A. turbidans become very rapidly inactivated. Under these conditions, this new stabilized derivative exhibited a very high selectivity for the transferase activity compared to the esterase one, as well as a very low hydrolytic activity towards the antibiotic. Moreover, this new biocatalyst did not recognize -phenylglycine as substrate in the synthetic process. By using the racemic mixture of / phenylglycine methyl ester, 85% of the -ester could be transformed to ampicillin. In contrast, the enzyme from E. coli exhibited a high hydrolytic activity for the ampicillin yielding low synthetic yields. This enzyme also resulted much less enantioselective producing both isomers of the antibiotic.