Environmental and economic issues arising from the pooling of SMEs’ supply chains: case study of the food industry in western France

Supply chains pooling is an emergent strategy for improving logistical performance. The pooling concept consists in transferring the effort of coordination for consolidating independent operators’ flows towards an ad hoc pooled system. This organisation results from a design of a pooled logistics network by merging different supply chains to share transport and logistics resources in order to improve logistics performance. In this case study, the pooling concept is applied to a collection of small and medium-sized western France food suppliers serving the same retail chain. In order to demonstrate the efficiency of the pooling, the existing transport organisation was compared to various pooling scenarios. The methodology consisted in accessing a current situation through a survey of the flow of goods at one of the main distribution centre of the studied supply network, then comparing this situation with three other pooling scenarios. Using supply network optimisation models, these scenarios were assessed considering cost and CO₂ emission levels. This study demonstrates the interest of transport pooling in the case independent shipping networks of Small and Medium Enterprises compared to the partially know existing strategies adopted by logistics service providers for less than truckload shipments. Moreover, it suggests that there is no dominant supply organisation and that transport pooling is a new stimulus for network design. These results also bring new research perspectives for generalisation of pooling and gain sharing within large coalitions.     

Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—Part 3: LCC-related aspects

Purpose

This article is the third of a series of articles presenting the results of research on the implementation of life cycle management tools in small- and medium-sized companies in Poland. The purpose of the three-part series of articles is to present the results of research on the implementation of life cycle tools in Polish small and medium enterprises (SMEs). This work is part of a project financed by the Polish Agency for Enterprise Development (PAED) which began in February 2011. It was carried out by the Wielkopolska Quality Institute—a business environment institution associated with the Polish Centre for LCA (PCLCA). The main practical objective of the project was to support SMEs in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for the improvement and promotion of the products and services on offer. The specific objective of the analysis involving the assessment of life-cycle costs of products and services was an attempt to answer the question to determine whether the assessment carried out in accordance with the life-cycle cost (LCC) methodology is a good tool for cost management in this type of business. Part 3 describes the results of studies on the assessment of the implementation of LCC in SMEs conducted in 50 companies involved in the project.

Methods

In order to assess the effectiveness of the project and the effectiveness of the implementation of LCA and LCC, a survey was conducted of small- and medium-sized businesses where the implementation works had been fully completed. In total, 50 organisations agreed to participate in the LCC survey (while 46 in the LCA—part 2 paper), which was 71 % of all the companies where the LCA and LCC studies had been carried out within the project. The survey was conducted using individual in-depth interviews. Questions to the representatives of the companies referred both to aspects of their operating in the market (characteristics of a company, its market share, management systems, environmental policy, suppliers, clients) and the implementation of their environmental service (assessment of its effectiveness, motivation, difficulties in its implementation), as well as opinions on the potential applications of LCA in their current operations.

Results and discussion

The experience and observations of LCC experts resulting from their cooperation with the analysed organisations are largely supported by the results of the survey. The overall impression gained from the project is that the small- and medium-sized enterprises considered have a problem with accepting and understanding the life-cycle perspective, and show limited interest in taking liability for environmental and cost aspects beyond the mandatory legal standards and boundaries of their business operations. Nevertheless, the LCC analyses aroused much bigger interest among the companies than the environmental due to the fact that the cost aspects in companies undergoing normal development are seen as an important source of information about the structure of the costs generated with respect to the products or services provided. It is important to note that a very important factor encouraging businesses to join the studies was the fact that they were cost-free. Moreover, the planned introduction of a new product onto the market was the argument that often influenced the decision to implement the LCC. The survey has shown that companies rarely perform cost analyses including all stages of the life cycle of a product or service. Although the awareness of the importance of conducting economic researches for the entire life cycle of a product or service is great, it turned out to be problematic to unambiguously define the practical use of such an analysis, at least at the present stage of development of the companies surveyed.

Conclusions

The results obtained in the survey indicate that in the case of simple products, with a short life cycle, complex cost analyses may seem less useful. For more complex products or services, with long periods of use, high reliability required, and high operating costs, the analyses presented are useful tools that increase the economic efficiency of the projects implemented. It appears that from the point of view of polish SMEs, the usefulness of an LCA is seen mainly from the angle of opportunities for cost reduction (preferably in business) and increased sales (marketing). A good solution would be to conduct relatively simple, but integrated LCA/LCC analyses in SMEs so that the companies would clearly see the economic effects of the proposed environmental improvements.     

Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—part 2: LCA related aspects

Purpose

This article is the second part of a series of articles presenting the results of research on the implementation of lifecycle management tools in small- and medium-sized companies in Poland. This work is part of a project financed by the Polish Agency for Enterprise Development (PAED), which began in February 2011. It was carried out by the Wielkopolska Quality Institute, a business environment institution associated with the Polish Centre for life cycle assessment (PCLCA). The main practical objective of the project was to support small and medium enterprises (SMEs) in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for the improvement and promotion of the products and services they offer. The specific objective of the analysis on the environmental impact was an attempt to answer the question of whether environmental LCA is a good management tool for this type of business. Part 2 describes results of the evaluation of the implementation of LCA in SMEs conducted in 46 companies involved in the project.

Methods

In order to assess the effectiveness of the project and the effectiveness of the implementation of LCA and life cycle costing (LCC), a survey was conducted of small and medium businesses where the implementation work had been fully completed. In total, 46 organisations agreed to participate in the LCA survey, which was almost 66 % of all the companies where the LCA and LCC studies had been carried out within the project. The survey was conducted using individual in-depth interviews. Questions to the representatives of the companies referred both to aspects of their functioning in the market (characteristics of a company, its market share, management systems, environmental policy, suppliers and clients) and the operation of their environmental service (assessment of its effectiveness, motivation and difficulties in its implementation), as well as opinions on the potential applications of LCA in their current operations.

Results and discussion

The experience and observations of LCA experts resulting from their cooperation with the organisations analysed are largely supported by the results of the survey. The overall impression gained from the project is that the small- and medium-sized enterprises analysed have a problem with accepting and understanding the life cycle perspective and show limited interest in taking liability for environmental aspects beyond the mandatory legal standards and boundaries of their business operations. The survey shows that the companies rarely analyse environmental aspects appearing on many different stages of the life cycle of their products. Most of them focus on their current operations while trying to meet the mandatory legal requirements relating to environmental protection. It should be noted, however, that SMEs taking part in the studies appreciate the opportunities offered by LCA, their usefulness in business practice, recognise the potential for using life cycle techniques in the future and their impact on the management process, procedure or thinking about the products they manufacture. The result of the study is the identification of four key areas relevant to SMEs which may affect their willingness to adopt the life cycle perspective and undertake environmental measures.

Conclusions

It seems that implementing LCT in small- and medium-sized enterprises requires a special approach. These are often companies with limited human resources (often just a few people) and financial resources (often operating on the verge of survival), with a weak position in a supply chain and, therefore, having various priorities in their daily operation. The researchers also encountered awareness barriers as a result of which the idea of going beyond an organisation and making an entire LCA of a product was often simply misunderstood. The studies conducted among SMEs have shown that managers' own intuition and research on customer preferences were largely conducive to improve existing or introducing new products or services, while changes were mostly introduced due to the requirements of the market, or the desire to reduce costs. It can be assumed that their non-obligatory nature also contributed to the relatively low interest in LCA initiatives and not recognising their usefulness. It seems that it would be useful to carry out relatively simple, but integrated, LCA/LCC analyses in SMEs so that the companies would clearly see the economic effect of the proposed environmental improvements. The analyses conducted lead to the conclusion that the incentive for SMEs to take measures should come from outside, e.g. as requirements for green public procurements, or as part of assessment made by suppliers in a supply chain.     

Life cycle thinking in small and medium enterprises: the results of research on the implementation of life cycle tools in Polish SMEs—part 1: background and framework

Purpose

This article is the first of a series of articles presenting the results of research on the implementation of life cycle management tools in small- and medium-sized companies in Poland. This work is part of a project financed by the Polish Agency for Enterprise Development (PAED) which began in February 2011. It was carried out by the Wielkopolska Quality Institute—a business environment institution associated with the Polish Centre for Life Cycle Assessment (PCLCA). The main practical objective of the project was to support small and medium enterprises (SMEs) in their business development, e.g. by expanding their horizons beyond the sphere of their operation and identifying new areas for improvement and promotion of the products and services on offer. These publications are a voice in the discussion on the opportunities and pertinence of implementing life cycle thinking (LCT) in small- and medium-sized enterprises and an attempt to identify potential barriers arising from specific characteristics of SMEs which could hinder or even prevent the effective implementation of life cycle techniques. Part 1 presents the situation of SMEs in Poland, general objectives of the project and organisation of the survey process.

Methods

It was decided to carry out research on the effectiveness of the implementation of LCA and life cycle costing (LCC) in organisations that had received financial support for the implementation of life cycle techniques. Financial constraints, which might potentially be a reason for limited interest in LC techniques among SMEs in Poland, were taken into account. Thus, financial support provided an opportunity for the project to obtain information from a wide range of companies, not only from those companies that were particularly aware of the benefits of LC techniques or had a very good financial situation. Research based on the method of individual in-depth interviews was preceded by an analysis of literature showing the status of SMEs in Poland. Given the results, the project objectives were formulated and the ways of conducting the research were defined.

Results and discussion

The comparison of Polish SMEs with the same category of companies in the EU shows some similarities, such as the percentage of companies engaged in various businesses. The differences are expressed primarily in the financial potential, which in the case of Polish SMEs, is significantly smaller than the average in the EU. In the SME sector, there are less than half as many small businesses in Poland than in the EU. There are, however, many more microbusinesses in Poland. An evaluation of the prevalence of LCA and LCC techniques indicates that they are used by just 3 % of Polish SMEs, which is a very small proportion compared to the more than 50 % of SMEs taking any environmental measures. Information collected on specific details of Polish SMEs was used to identify the target group and develop a survey questionnaire which aimed to audit, among other things, the approach to environmental and economic analyses in the past and the approach to the LCA and/or LCC analyses that were implemented from the point of view of difficulties in their implementation and potential use of the results.

Conclusions

Part 1 of the series of articles demonstrates a marginal-scale dissemination of life cycle management techniques among Polish SMEs. Companies definitely prefer to introduce relatively simple solutions that do not require specialised knowledge or unnecessary costs, e.g. they introduce energy-saving bulbs and waste segregation. Only a small percentage of companies implement more complex activities, and most commonly, these are medium-sized companies with greater financial and human capital. So what should be done to make SMEs use life cycle techniques more frequently? Is it appropriate to make changes in the methodology and life cycle techniques as such, or should, rather, the incentive for SMEs to use LCT come from outside as a requirement of public institutions or suppliers in a supply chain? Answers to these questions are provided in the research conclusions presented in parts 2 and 3 of the series of articles.     

Is the Octomacridae the sister family of the Diplozodae?

Diplozoidae and Octomacridae are usually considered as sister families. Essentially this is because they are the only polyopisthocotyleans parasitising primary freshwater teleosts. Because of the lack of phylogenetically informative morphological characters to explore the pattern of colonisation of the primary continental freshwater teleosts and in order to understand the appearance of the "natural parabiosis" of Diplozoidae, a molecular phylogeny was inferred by comparing newly obtained partial 28S and 18S rDNA gene sequences of Eudiplozoon nipponicum and Diplozoon homoion with other already available sequences. The phylogenetic analysis seems to show that Diplozoidae and Octomacridae are not sister groups. Thus, the colonisation of primary freshwater teleosts by these two families could be independent.     

Did the evolution of the phytoplankton fuel the diversification of the marine biosphere?

We discuss the possible links between the fossil record of marine biodiversity, nutrient availability and primary productivity. The parallelism of the fossil records of marine phytoplankton and faunal biodiversity implicates the quantity (primary productivity) and quality (stoichiometry) of phytoplankton as being critical to the diversification of the marine biosphere through the Phanerozoic. The relatively subdued marine biodiversity of the Palaeozoic corresponds to a time of relatively low macronutrient availability and poor food quality of the phytoplankton as opposed to the diversification of the Modern Fauna through the Mesozoic–Cenozoic. Increasing nutrient runoff to the oceans through the Phanerozoic resulted from orogeny, the emplacement of Large Igneous Provinces (LIPs), the evolution of deep-rooting forests and the appearance of more easily decomposable terrestrial organic matter that enhanced weathering. Positive feedback by bioturbation of an expanding benthos played a critical role in evolving biogeochemical cycles by linking the oxidation of dead organic matter and the recycling of nutrients back to the water column where they could be re-utilized. We assess our conclusions against a recently published biogeochemical model for geological time-scales. Major peaks of marine diversity often occur near rising or peak fluxes of silica, phosphorus and dissolved reactive oceanic phosphorus; either major or minor ⁸⁷Sr/⁸⁶Sr peaks; and frequently in the vicinity of major (Circum-Atlantic Magmatic Province) and minor volcanic events, some of which are associated with Oceanic Anoxic Events. These processes appear to be scale-dependent in that they lie on a continuum between biodiversification on macroevolutionary scales of geological time and mass extinction.     

Imperfect Batesian mimicry—the effects of the frequency and the distastefulness of the model

Batesian mimicry is the resemblance between unpalatable models and palatable mimics. The widely accepted idea is that the frequency and the unprofitability of the model are crucial for the introduction of a Batesian mimic into the prey population. However, experimental evidence is limited and furthermore, previous studies have considered mainly perfect mimicry (automimicry). We investigated imperfect Batesian mimicry by varying the frequency of an aposematic model at two levels of distastefulness. The predator encountered prey in a random order, one prey item at a time. The prey were thus presented realistically in a sequential way. Great tits (Parus major) were used as predators. This experiment, with a novel signal, supports the idea that Batesian mimics gain most when the models outnumber them. The mortalities of the mimics as well as the models were significantly dependent on the frequency of the model. Both prey types survived better the fewer mimics there were confusing the predator. There were also indications that the degree of distastefulness of the model had an effect on the survival of the Batesian mimic: the models survived significantly better the more distasteful they were. The experiment supports the most classical predictions in the theories of the origin and maintenance of Batesian mimicry.     

Phytochemicals: the good, the bad and the ugly?

Phytochemicals are constitutive metabolites that enable plants to overcome temporary or continuous threats integral to their environment, while also controlling essential functions of growth and reproduction. All of these roles are generally advantageous to the producing organisms but the inherent biological activity of such constituents often causes dramatic adverse consequences in other organisms that may be exposed to them. Nevertheless, such effects may be the essential indicator of desirable properties, such as therapeutic potential, especially when the mechanism of bioactivity can be delineated. Careful observation of cause and effect, followed by a coordinated approach to identify the responsible entities, has proved extremely fruitful in discovering roles for phytochemical constituents. The process is illustrated by selected examples of plants poisonous to animals and include the steroidal alkaloid toxin of Veratrum californicum (Western false hellebore), piperidine alkaloids of Lupinus species (lupines), and polyhydroxy indolizidine, pyrrolizidine and nortropane alkaloids of Astragalus and Oxytropis species (locoweeds), Castanospermum australe (Moreton Bay chestnut) and Ipomoea species (morning glories).     

Effect of cortisone on the developmental pattern of the neutral and the acid β-galactosidases of the small intestine of the rat

1. The developmental pattern and effect of cortisone on acid beta-galactosidase and neutral beta-galactosidase were studied in postnatal rats by a recently proposed method for their independent determination. 2. After birth the acid beta-galactosidase activity increases in the ileum, whereas it decreases slightly in the jejunum. On day 16 after birth the activity in the ileum decreases and in 20-day-old rats activity in both parts of the intestine decreases to adult values. In suckling animals the activity in the ileum exceeds the jejunal activity severalfold and in adult animals the activity in the jejunum is slightly higher than that in the ileum. 3. Neutral beta-galactosidase activity is high after birth and decreases in both jejunum and ileum after day 20 after birth. In 12-20-day-old rats activity in both parts is essentially the same, but in adult animals jejunal activity exceeds ileal activity four-to five-fold. 4. Cortisone (0.5, 2.0 or 5.0mg/100g body wt. daily for 4 days) does not influence the activity of either enzyme in 60-day-old rats. Acid beta-galactosidase activity is decreased after cortisone treatment in 8-, 12-, 16-and 18-day-old rats, with sensitivity to cortisone increasing with the approach of weaning. No effect of cortisone on acid beta-galactosidase is seen in 8-day-old rats. Neutral beta-galactosidase activity is increased in the ileum of 8-, 12-, 16- and 18-day old rats, but only in the jejunum of 8-and 12-day-old rats.     

Is Mislocalization during Saccades Related to the Position of the Saccade Target within the Image or to the Gaze Position at the End of the Saccade?

A stimulus that is flashed around the time of a saccade tends to be mislocalized in the direction of the saccade target. Our question is whether the mislocalization is related to the position of the saccade target within the image or to the gaze position at the end of the saccade. We separated the two with a visual illusion that influences the perceived distance to the target of the saccade and thus saccade endpoint without affecting the perceived position of the saccade target within the image. We asked participants to make horizontal saccades from the left to the right end of the shaft of a Müller-Lyer figure. Around the time of the saccade, we flashed a bar at one of five possible positions and asked participants to indicate its location by touching the screen. As expected, participants made shorter saccades along the fins-in (<–>) configuration than along the fins-out (>–<) configuration of the figure. The illusion also influenced the mislocalization pattern during saccades, with flashes presented with the fins-out configuration being perceived beyond flashes presented with the fins-in configuration. The difference between the patterns of mislocalization for bars flashed during the saccade for the two configurations corresponded quantitatively with a prediction based on compression towards the saccade endpoint considering the magnitude of the effect of the illusion on saccade amplitude. We conclude that mislocalization is related to the eye position at the end of the saccade, rather than to the position of the saccade target within the image.     

Does the weight of the brain depend on the body height?]

Brains of 1664 subjects (895 males and 769 females) aged from 20 to 89 years have been studied. The whole material being investigated was divided, within sex groups, into body-height classes and age classes. The class interval within the age classes was 10 years, that in height classes 5 cm. Mean arithmetics, standard deviations, standard error as well as coefficients of variation and correlation for respective classes have been calculated. It has been ascertained that the brain weight depends on the body height. In tall subjects no brains of extremely low absolute weight are encountered and, adversely, high brain weight is seldom met in short individuals. The body height also exerts certain influence upon the relative weight of the brain. More favourable proportion between the brain weight and the body length has been revealed in short subjects. Tall individuals are characterized by a low relative weight of the brain. It should be supposed that the spinal cord weight is higher in the latter subjects. The differences between the mean absolute weight of women's brains and that in men of the same age class are conditioned by the difference in the body length. A constant magnitude of difference in the mean brain weight in subjects of the same body height claims 100 g. The paper provides 2 enclosed tables representing obtained results for arithmetic mean of the absolute brain weight both in the age classes and body height classes. The differences between the mean weights of brains in women as well as in men are not significant. The coefficient of correlation between the brain weight and the body height is for men r male1 = 0.2008 for women r female1 = 0.2630, wherease the coefficient of regression for the brain weight is r male2 = 3.67 and r female2 = 3.906 respectively.