Molecular cloning of a thermo-alkaliphilic lipase from Bacillus subtilis DR8806: Expression and biochemical characterization

A thermo-alkaliphilic lipase from Bacillus subtilis DR8806 was functionally expressed as an N-terminal 6xHis-tagged recombinant enzyme in Escherichia coli BL21 using pET-28a(+) expression vector. Sequence analysis revealed an open reading frame of 639 bp encoding a 212-amino acid protein containing the well-conserved Ala-His-Ser-Met-Gly motif. One-step purification of the His-tagged recombinant lipase was achieved using Ni-NTA affinity chromatography with a specific activity of 1364 U/mg. The purified enzyme with an apparent molecular mass of 26.8 kDa demonstrated the maximum activity at 70 °C and pH 8.0 for hydrolysis of p-nitrophenylbutyrate as substrate. The enzyme activity was strongly inhibited by divalent ions of heavy metals such as Hg²⁺ and Cu²⁺, while retained over 90% of the original activity in the presence of several reagents including DTNB (5,5′-dithiobis-(2-nitrobenzoic acid)), SDS (sodium dodecyl sulfate), urea, DMF (dimethylformamide), DTT (dithiothreitol), glycerol and Triton X-100. While being considerably stable in organic solvents, imidazolium-based ionic liquids (ILs) had stimulatory effects on the activity of purified lipase. Remarkable stabilization of enzyme at alkaline pH and in ionic liquids as well as its thermostability/thermoactivity are among the most fundamental characteristics which offer great potential for various biotechnological applications including detergent formulation, bioremediation processes and biotransformation in non-aqueous media.     

Cloning,expression, and characterization of a thermostable and pH-stable laccase from Klebsiella pneumoniae and its application to dye decolorization

A thermostable and pH-stable laccase from Klebsiella pneumoniae was cloned and expressed in Escherichia coli. The recombinant laccase (rLac) achieved a specific activity of 7.12 U/mg after purification by Ni-affinity chromatography. Optimal enzyme activity was observed at pH 4.0 and 35 °C for 2,2′-azino-bis (3-ethylbenzthiazoline sulfonic acid) (ABTS) oxidization and pH 8.0 and 70 °C for 2,6-dimethoxyphenol (2,6-DMP) oxidization. Thermostability and pH stability studies showed that the rLac was stable over the range of 30–70 °C and pH 5.0–9.0 using 2,6-DMP as substrate. Circular dichroism analysis suggested that the secondary structure of the rLac mainly consisted of α-helix that played a vital role in maintaining laccase activity and revealed the potential mechanisms for the changes in laccase activity under varying pHs (3.0–11.0) and temperatures (20–90 °C). Finally, the rLac could decolorize the tested dyes with high decolorization efficiency.     

Human growth hormone-specific aptamer identification using improved oligonucleotide ligand evolution method

LETEG is a method developed and used for the separation and purification of proteins employing a single-step ligand (aptamers) evolution in which aptamers are eluted with an increasing temperature gradient. Using recombinant human growth hormone (rhGH) as the test purification target, and after avoiding cross reactions of aptamers with Bacillus subtilis extracellular proteins by negative SELEX, the effects of time and pH on aptamer binding to rhGH were investigated. The highest binding efficiency of aptamers on rhGH-immobilized microparticles was obtained at pH 7.0. The aptamers that interacted with rhGH were eluted by a multi-stage step-up temperature gradient in ΔT = 10 °C increments within the range T = 55–95 °C; and the strongest affinity binding was disrupted at T = 85 °C where C_Apt = 0.16 μM was eluted. The equilibrium binding data obtained was described by a Langmuir-type isotherm; where the affinity constant was K_D = 218 nM rhGH. RhGH was separated from the fermentation broth with 99.8% purity, indicating that the method developed is properly applicable even for an anionic protein.     

Characterization of functionally active immobilized carbonic anhydrase purified from sheep blood lysates

Carbonic anhydrase (CA) catalyzes the reversible reaction of hydration of CO₂ to bicarbonate and the dehydration of bicarbonate back to CO₂. Sequestration of CO₂ from industrial processes or breathing air may require a large amount of highly active and stable CA. Therefore, the objectives of the present study were to purify large amounts of CA from a cheap and easily accessible source of the enzyme and to characterize the enzymatic and kinetic properties of soluble and immobilized enzyme. We recovered 80% of pure enzyme with a specific activity of 4870 EU/mg protein in a single step using sheep blood lysates from slaughter house waste products and CA specific inhibitor affinity chromatography. Since affinity pure CA showed both anhydrase and esterase activities, we measured the esterase activities for enzymology. The Michaelis–Menten constant, K_M, pH optimum, activation energy, and thermal stability of soluble enzymes were 8 × 10^?2 M, 7.3 pH, 7.3 kcal/mol and 70 °C, respectively.The immobilization of the enzyme to Affigel-10 was very efficient and 83% of purified enzyme was immobilized. The immobilized enzyme showed a K_M of 5 × 10^?2 M and activation energy of 8.9 kcal/mol, suggesting a better preference of substrate for immobilized enzyme in comparison to soluble enzyme. In contrast to soluble enzyme, immobilized enzyme showed relatively higher activity at pH 6–8. From these results, we concluded that a shift in pH profile toward acidic pH is due to modification of lysine residues involved in the immobilization process. The immobilized enzyme was stable at higher temperatures and showed highest activity at 80 °C. The activity of immobilized enzyme in a flow reactor at 0.5–2.2 ml/min flow rate was unaffected. Collectively, results from the present study suggested the application of blood lysate waste from animal slaughterhouses for purification of homogeneous enzyme for CO₂ capture in a flow reactor.     

Expression and one-step purification of a β-galactosidase by fusion with elastin-like polypetides

Thermally triggered reversible phase transition of elastin-like polypeptide (ELP) allows for a simple, economical and scalable procedure of protein purification. This technique is especially useful for purifying salt-requiring enzymes such as halophilic enzymes which require high salt concentration to keep natural structure and activity. In this study, a highly hydrophilic/acidic β-galactosidase cloned from halotolerant Planococcus sp.L4 was used as a target protein to apply ELP tags for purification. A high-level expression of β-galactosidase tagged with 80 repeats of Val-Pro-Gly-Val-Gly pentapeptide (galactosidase-ELP[V₅-80]) was achieved in Escherichia coli BLR(DE3) at 21 °C for 24 h, accounting for around 50% of the total protein. The enzyme activity of the fusion by optimized protocol should be reached as much as 3 folds of that by rapid IPTG-induction, implying that measures to avoid possible errors during protein expression can be helpful for keeping bioactivities. The optimal condition for precipitating ELP-tagged protein was performed with a simple, rapid and sensitive method by examining the activity of supernatant after the first-round hot spin. The fusion protein aggregated effectively at 37 °C with 1.5 M ammonium sulfate and yielded highly pure protein with a recovery higher than 90% by one cycle. These results suggested that inverse transition cycling (ITC) process provides a potential for the large-scale purification of halophilic β-galactosidase.     

Evaluating aqueous two-phase systems for Yarrowia lipolytica extracellular lipase purification

In this study an aqueous two-phase system (ATPS) composed of polyethylene glycol (PEG) and potassium phosphate was tested for the purification of lipase from Yarrowia lipolytica IMUFRJ 50682. Ultrafiltration and precipitation with acetone and kaolin were also used as traditional comparison methods Ultrafiltration was a good method with a purification factor of 6.55, but protease was also purified in this extract. For the precipitation with acetone and kaolin lower values of lipase and protease activity were found in relation to the original crude enzyme extract. Under the best conditions of ATPS (pH 6 and 4 °C), the purification fold was greater than 40 and selectivity was almost 500. Lipase was recovered in the salty phase which makes it easier to purify it. The optimum pH and temperature ranges for purified lipase with this system was 6–7 and 35–40 °C, respectively. Lipase thermostability was increased in relation to crude extract after the purification with the PEG/phosphate buffer system for temperatures lower than 50 °C. All enzyme extracts showed good stability to a wide pH range. Y. lipolytca lipase was successfully purified by using ATPS in a single downstream processing step and presented good process characteristics after this treatment.     

Production of human antimicrobial peptide LL-37 in Escherichia coli using a thioredoxin–SUMO dual fusion system

LL-37 is a human antimicrobial peptide that has been shown to possess multiple functions in host defense. In this report, the peptide was expressed as a fusion with a thioredoxin–SUMO dual-tag. Upon SUMO protease mediated cleavage at the SUMO/peptide junction, LL-37 with its native N-terminus was generated. The released peptide was separated from the dual-tag and cleavage enzyme by size-exclusion chromatography. Mass spectrometry analysis proves that the recombinant peptide has a molecular weight as theoretically expected for its native form. The produced peptide displayed antimicrobial activity against Escherichia coli K-12. On average, 2.4 mg peptide was obtained from one liter of bacterial culture. Thus, the described approach provides an effective alternative for producing active recombinant LL-37 with its natural amino acid sequence in E. coli.     

Characterization of an indican-hydrolyzing enzyme from Sinorhizobium meliloti

A novel β-glucosidase capable of hydrolyzing indican to indigo was mined and isolated from Sinorhizobium meliloti using a systematic approach. The corresponding gene was amplified by PCR and overexpressed in the soluble fraction as an MBP fusion protein. The resulting enzyme easily purified to apparent homogeneity via a consecutive step in the affinity column. The recombinant enzyme was determined to be a monomer with a calculated molecular mass of 52 kDa and showed the maximum activity for indican at pH 7.0 and 45 °C. The kinetic parameters for indican, K_M and V_max, were determined to be 0.97 mM and 355.6 μM/min/mg protein, respectively, at pH 7.0 and 35 °C. Additionally, this enzyme hydrolyzed both the β-(1-4)- and β-(1-6)-glucosidic bonds and revealed a minor activity against α-d-glucosides. Furthermore, the enzyme was severely inhibited by DTT, indicating a possibility that the oxidation of amino acids could play a crucial role in the activity of the enzyme.     

Copper,zinc superoxide dismutase of Curcuma aromatica is a kinetically stable protein

This study details on cloning and characterization of Cu,Zn superoxide dismutase (Ca–Cu,Zn SOD) from a medicinally important plant species Curcuma aromatica. Ca–Cu,Zn SOD was 692 bp with an open reading frame of 459 bp. Expression of the gene in Escherichia coli cells followed by purification yielded the enzyme with K_m of 0.047 ± 0.008 μM and V_max of 1250 ± 24 units/mg of protein. The enzyme functioned (i) across a temperature range of −10 to +80 °C with temperature optima at 20 °C; and (ii) at pH range of 6–9 with optimum activity at pH 7.8. Ca–Cu,Zn SOD retained 50% of the maximum activity after autoclaving, and was stable at a wide storage pH ranging from 3 to 10. The enzyme tolerated varying concentrations of denaturating agent, reductants, inhibitors, trypsin, was fairly resistant to inactivation at 80 °C for 180 min (k_d, 6.54 ± 0.17 × 10⁻³ min⁻¹; t_1/2, 106.07 ± 2.68 min), and had midpoint of thermal transition (T_m) of 70.45 °C. The results suggested Ca–Cu,Zn SOD to be a kinetically stable protein that could be used for various industrial applications.     

Microbial surface displaying formate dehydrogenase and its application in optical detection of formate

In the present work, NAD⁺-dependent formate dehydrogenase (FDH), encoded by fdh gene from Candida boidinii was successfully displayed on Escherichia coli cell surface using ice nucleation protein (INP) from Pseudomonas borealis DL7 as an anchoring protein. Localization of matlose binding protein (MBP)-INP-FDH fusion protein on the E. coli cell surface was characterized by SDS-PAGE and enzymatic activity assay. FDH activity was monitored through the oxidation of formate catalyzed by cell-surface-displayed FDH with its cofactor NAD⁺, and the production of NADH can be detected spectrometrically at 340 nm. After induction for 24 h in Luria-Bertani medium containing isopropyl-β-d-thiogalactopyranoside, over 80% of MBP-INP-FDH fusion protein present on the surface of E. coli cells. The cell-surface-displayed FDH showed optimal temperature of 50 °C and optimal pH of 9.0. Additionally, the cell-surface-displayed FDH retained its original enzymatic activity after incubation at 4 °C for one month with the half-life of 17 days at 40 °C and 38 h at 50 °C. The FDH activity could be inhibited to different extents by some transition metal ions and anions. Moreover, the E. coli cells expressing FDH showed different tolerance to solvents. The recombinant whole cell exhibited high formate specificity. Finally, the E. coli cell expressing FDH was used to assay formate with a wide linear range of 5–700 μM and a low limit of detection of 2 μM. It is anticipated that the genetically engineered cells may have a broad application in biosensors, biofuels and cofactor regeneration system.     

Milk-clotting enzymes produced by culture of Bacillus subtilis natto

Factors affecting the production of milk-clotting enzyme (MCE) by Bacillus subtilis (natto) Takahashi, a ready available commercial natto starter, were studied. Remarkable milk-clotting activity (MCA), 685.7 SU/ml or 12,000 SU/g, was obtained when the bacteria were cultivated in the medium containing sucrose (50 g/L) and basal salts at pH 6, 37 °C with shaking at 175 rpm for 1 day. The MCA and MCA/PA ratio of the crude enzyme obtained are comparable with those of Pfizer microbial rennin and Mucor rennin. The crude enzyme showed excellent pH and thermal stability; it retained 96% of MCA after incubation for 40 min at 40 °C and retained more than 80% of its activity between pH 4 and pH 7 for more than 30 min at 30 °C. The MCE of B. subtilis (natto) Takahashi has potential as calf rennet substitutes.     

A multi-tolerant low molecular weight mannanase from Bacillus sp. CSB39 and its compatibility as an industrial biocatalyst

Bacillus sp. CSB39, isolated from popular traditional Korean food (Kimchi), produced a low molecular weight, thermostable mannanase (MnCSB39); 571.14 U/mL using locust bean gum galactomannan as a major substrate. It was purified to homogeneity using a simple and effective two-step purification strategy, Sepharose CL-6B and DEAE Sepharose Fast Flow, which resulted in 25.47% yield and 19.32-fold purity. The surfactant-, NaCl-, urea-, and protease-tolerant monomeric protein had a mass of ∼30 kDa as analyzed by SDS-PAGE and galactomannan zymography. MnCSB39 was found to have optimal activity at pH 7.5 and temperature of 70 °C. The enzyme showed ˃55% activity at 5.0–15% (w/v) NaCl, and ˃93% of the initial activity after incubation at 37 °C for 60 min. Trypsin and proteinase K had no effect on MnCBS39. The enzyme showed ˃80% activity in up to 3 M urea. The N-terminal amino acid sequence, ALKGDGX, did not show identity with reported mannanases, which suggests the novelty of our enzyme. Activation energy for galactomannan hydrolysis was 26.85 kJmol⁻¹ with a K_cat of 142.58 × 10⁴ s⁻¹. MnCSB39 had K_m and V_max values of 0.082 mg/mL and 1099 ± 1.0 Umg⁻¹, respectively. Thermodynamic parameters such as ΔH, ΔG, ΔS, Q₁₀, ΔG_E-S, and ΔG_E-T supported the spontaneous formation of products and the high hydrolytic efficiency and feasibility of the enzymatic reaction, which strengthen its novelty. MnCSB39 activity was affected by metal ions, modulators, chelators, and detergents. Mannobiose was the principal end-product of hydrolysis. Bacillus subtilis CSB39 produced a maximum of 1524.44 U mannanase from solid state fermentation of 1 g wheat bran. MnCSB39 was simple to purify, was active at a wide pH and temperature range, multi-stress tolerant and catalyzes a thermodynamically possible reaction, characteristics that suggests its suitability for application as an industrial biocatalyst.     

Investigation on enzymatic degradation of γ-polyglutamic acid from Bacillus subtilis NX-2

The preparation of γ-polyglutamic acid (γ-PGA) from Bacillus subtilis NX-2 has been previously investigated, and its depolymerization during the batch culture was studied in this paper. The results suggested that the γ-PGA depolymerase was present and active extracellularly in the culture. The ywtD gene from B. subtilis NX-2, encoding the γ-PGA depolymerase was cloned and expressed in Escherichia coli. The YwtD protein was purified by metal-chelating affinity chromatography. YwtD was proved to be an endo-hydrolase enzyme and exhibited a remarkable activity in γ-PGA degradation at a wide range of temperature (30–40 °C) and pH (5.0–8.0). On an optimal condition of 30 °C and pH 5.0, an efficient γ-PGA enzymatic degradation was achieved. The molecular weight of γ-PGA could be reduced within the range of 1000–20 kDa and the polydispersity also decreased as a function of depolymerization time. Therefore, a controllable degradation of γ-PGA could be available by enzymatic depolymerization.     

Cloning,expression and characterization of highly thermo- and pH-stable maltogenic amylase from a thermophilic bacterium Geobacillus caldoxylosilyticus TK4

Maltogenic amylases (MAases), a subclass of cyclodextrin (CD)-hydrolyzing enzymes, belong to glycoside hydrolase family 13. A gene corresponding to MA in Geobacillus caldoxylosilyticus TK4 (GcaTK4MA) was cloned into pET28a(+) vector and expressed in Escherichia coli with 6xHis-tag at the N-terminus. Herein, we report on the biochemical properties of a new thermo- and pH-stable MA. GcaTK4MA has similar properties those of other MAases in terms of the primary structure, preference for CD over starch and having an extra domain at its N- and C-terminals. The recombinant protein was purified efficiently by using one-step nickel affinity chromatography. The purified enzyme exhibited optimal activity for β-CD hydrolysis at 50 °C and pH 7.0. When the enzyme was separately incubated at 4 °C and 50 °C in the buffer solutions (pH 3.0–9.0) up to 7 days, it was seen that the enzyme had the higher stability at 50 °C than 4 °C. The enzyme retained about 80% of its original activity when it was incubated at 50 °C for 7 days. The enzyme activity was significantly inhibited by SDS and EDTA at the final concentration of 1%. These results suggest that this is the first reported MA having an extremely pH- and thermal stabilities.     

Characterization,purification, and temperature/pressure stability of polyphenol oxidase extracted from plums (Prunus domestica)

In this study, polyphenol oxidase (PPO) was extracted from Prunus domestica and partially purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and ion exchange chromatography. The final purification step revealed a 32.81-fold purification, and the molecular mass was estimated to be 65 kDa by SDS-PAGE. The purified PPO showed enzymatic activity mainly toward five substrates, namely catechol, catechin, 4-methyl catechol, chlorogenic acid, and L-3,4-dihydroxyphenylalanine, whereas it showed no activity toward caffeic acid, ferulic acid, p-coumaric acid, p-cresol, and l-tyrosine. The optimum pH and temperature values were 6.0 and 25 °C, respectively. The enzyme showed high stability in the pH range of 5.0–7.0 and in the temperature range of 25–65 °C. The most effective inhibitors of this enzyme were found to be ascorbic acid and l-cysteine. The thermal inactivation followed a first-order kinetic model, with activation energy of E_a 150.46 ± 1.29 kJ/mol. PPO extracted from plum showed stability at high pressure, with enzyme activation at 500 MPa.     

Two phase partitioning and collagen hydrolysis of bromelain from pineapple peel Nang Lae cultivar

Extraction of bromelain from pineapple peel (Nang Lae cultv.) using aqueous two phase system (ATPS) was optimized. Some biochemical properties including collagen hydrolysis were also investigated. Bromelain predominantly partitioned to the polyethylene glycol (PEG)-rich phase. The highest enzyme activity recovery (113.54%) and purification fold (2.23) were presented in the top phase of 15% PEG2000–14% MgSO₄. Protein pattern and activity staining showed the molecular weight (MW) of bromelain to be about 29 kDa. The extracted bromelain showed the highest relative activity at pH 7.0 and 55 °C. Its activity was decreased continuously by increasing NaCl concentration (up to 1.5% (w/v)). The bromelain extract was applied to hydrolyze the skin collagen of beef and giant catfish (0–0.3 units). The β, α₁, α₂ of giant catfish skin collagen extensively degraded into small peptides when treated with 0.02 units of the bromelain extract. Bovine collagen was hydrolyzed using higher bromelain up to 0.18 units. This study showed the ATPS can be employed to partially purify bromelain from Nang Lae pineapple peel and the enzyme effectively hydrolyzed the collagens.     

Characterization of a thermophilic l-arabinose isomerase from Thermoanaerobacterium saccharolyticum NTOU1

l-Arabinose isomerase (EC 5.3.1.4, l-AI) mainly catalyzes the reversible aldose–ketose isomerization between l-arabinose and l-ribulose. l-AIs can also catalyze other reactions, such as the conversion of d-galactose to d-tagatose. In this study, the araA gene encoding l-AI was PCR-cloned from Thermoanaerobacterium saccharolyticum NTOU1 and then expressed in Escherichia coli. The recombinant l-AI was purified from the cell-free extract using nickel nitrilotriacetic acid metal-affinity chromatography. The purified enzyme showed an optimal activity at 70 °C and pH 7–7.5. The enzyme was stable at pHs ranging from 6.5 to 9.5 and the activity was fully retained after 2 h incubation at 55–65 °C. The low concentrations of divalent metal ions, either 0.1 mM Mn²⁺ or 0.05 mM Co²⁺, could improve both catalytic activity and thermostability at higher temperatures. The recombinant T. saccharolyticum NTOU1 l-AI has the lowest demand for metal ions among all characterized thermophilic l-AIs. This thermophilic l-AI shows a potential to be used in industry to produce d-tagatose from d-galactose.     

Improved production of alkaline polygalacturonate lyase by homologous overexpression pelA in Bacillus subtilis

A polygalacturonate lyase (PGL), PelA, was purified from the culture broth of Bacillus subtilis 7-3-3, with a molecular weight, optimal temperature, and pH of approximately 45 kDa, 55 °C, and 9.4, respectively. The PGL gene (pelA) was homologously overexpressed in B. subtilis 7-3-3 to increase the gene copies and enhance the PGL production. The resulting PGL activity was 2138 U mL^?1 at 44 h, and the productivity reached 48.58 U (mL h)^?1 through the homologous overexpression of strain B-pN-pelA in a 7.5 L fermentor, the highest PGL production compared to those reported in literature to the best of our knowledge. Crude enzyme has high PGL and PGase activity, which can remove 50.58% of pectin in unpretreatment ramie fibers at 50 °C for 4 h. Meanwhile, the enzyme system with a low level hemicellulase and almost no cellulase will further help in enhancing the efficiency of degumming besides maintaining tenacity of plant fiber. The B. subtilis B-pN-pelA shows high genetic stability and has great potential in the textile industry.     

Structural characterization of thermostable,solvent tolerant,cytosafe tannase from Bacillus subtilis PAB2

Tannase production by Bacillus subtilis PAB2, was investigated under solid state fermentation using tamarind seed as sole carbon source and it was found as the highest titer (73.44 U/gds). The enzyme was purified to homogeneity, which showed the molecular mass around 52 kDa (K_m = 0.445 mM, V_max = 125.8 mM/mg/min and K_cat = 2.88 min^–1). The enzyme was found stable in a range of pH (3.0–8.0) and temperature (30–70 °C) with an optimal activity at pH 5.0, pI of 4.4 and at 40 °C temperature. It exhibited half-life (t_1/2) of 4.5 h at 60 °C. The enzyme comprised a typical secondary structure containing α-helix (9.3%), β-pleated sheet (33.6%) and β-turn (17.2%). The native conformation of the enzyme was alike a 44 nm spherical nanoparticle upon aggregation. Thermodynamic parameters of tannase revealed that it was stable at 40 °C and showed Q₁₀, ΔG_d and ΔS_d values of 2.08, 99.37 KJ/mol and 252.38 J mol⁻¹ K⁻¹, respectively. Organic solvents were stimulatory with regard to enzyme activity. Moreover, the altered enzyme activity was determined to be correlated with the changes in structural conformation in presence of inducer and inhibitor. Tannase was explored to have no cytotoxicity on Vero cell line as well as rat model study.     

Cloning,purification and characterization of a thermostable β-galactosidase from Thermotoga naphthophila RUK-10

A novel β-galactosidase gene (Tnap1577) from the hyperthermophilic bacterium Thermotoga naphthophila RUK-10 was cloned and expressed in Escherichia coli BL21 (DE3) cells to produce β-galactosidase. The recombinant β-galactosidase was purified in three steps: heat treatment to deactivate E. coli proteins, Ni-NTA affinity chromatography and Q-sepharose chromatography. The optimum temperatures for the hydrolysis of o-nitrophenyl-β-d-galactoside (o-NPG) and lactose with the recombinant β-galactosidase were found to be 90 °C and 70 °C, respectively. The corresponding optimum pH values were 6.8 and 5.8, respectively. The molecular mass of the enzyme was estimated to be 70 kDa by SDS-PAGE analysis. Thermostability studies showed that the half-lives of the recombinant enzyme at 75 °C, 80 °C, 85 °C and 90 °C were 10.5, 4, 1, and 0.3 h, respectively. Kinetic studies on the recombinant β-galactosidase revealed K_m values for the hydrolysis of o-NPG and lactose of 1.31 mM and 1.43 mM, respectively. These values are considerably lower than those reported for other hyperthermophilic β-galactosidases, indicating high intrinsic affinity for these substrates. The recombinant β-galactosidase from Thermotoga naphthophila RUK-10 also showed transglycosylation activity in the synthesis of alkyl galactopyranoside. This additional activity suggests the enzyme has potential for broader biotechnological applications beyond the degradation of lactose.