Comparing the efficiency of the laccase–NHA and laccase–HBT systems in eucalyptus pulp bleaching

Laccase–mediator systems have the disadvantage that the mediator is expensive and potentially toxic. In this work, we used N-hydroxyacetanilide (NHA) in combination with laccase for the first time to bleach eucalypt pulp and found it to be a very promising, advantageous alternative to 1-hydroxybenzotriazole (HBT) as mediator. Thus, NHA is efficiently oxidized by laccase to a radical that absorbs light at 350 nm. Also, NHA is a better substrate for laccase than is HBT. An innovative result is that the enzyme is inactivated to a similar extent by both mediators under the typical treatment conditions of the bleaching step (L). This adverse effect, however, is strongly reduced in the presence of pulp. Moreover, the laccase–NHA system is as efficient as the laccase–HBT system in reducing the kappa number of eucalyptus pulp. Using a xylanase pretreatment or unbleached pulp boosts kappa number reduction and bleaching with the laccase–mediator system. Based on the results of cyclic voltammetry tests, NHA has a slightly lower redox potential than HBT, which further supports use of the former; also, unlike HBT, NHA is oxidized in a reversible, pH-dependent manner. Interestingly, the laccase–NHA system provides more efficient bleaching of eucalyptus pulp at pH 5 than it does at pH 4.     

Detoxification of Indigo carmine using a combined treatment via a novel trimeric thermostable laccase and microbial consortium

For the first time, the investigation of Indigo carmine decolorization was done using an atypical Scytalidium thermophilum laccase. Crude and purified laccases required high temperatures and slight acidic pH to achieve maximum Indigo decolorization. Kinetic parameters (K_m and k_cat) of the homotrimeric laccase toward Indigo carmine were determined and laccase efficacy toward repeated dye decolorization process was studied. For the first time, 5 g l⁻¹ as initial Indigo carmine concentration were efficiently transformed up to 50% within 6 h of incubation using 0.1 U ml⁻¹ of laccase and without presence of any mediators. In this study, we showed that the atypical laccase transformed the indigoid dye structure, confirmed by the color changing from blue to red. This intermediate (red) was a subject to an efficient microbial consortium treatment monitored by measuring the decrease in optical density and the total organic carbon removal efficiencies. Toxicological studies via micro-toxicity test showed that the released enzymatic and adapted consortium degradation products were both non-toxic while the initial product was toxic.     

Purification and characterization of a novel laccase from the ascomycete Trichoderma atroviride: Application on bioremediation of phenolic compounds

The extracellular laccase produced by the ascomycete Trichoderma atroviride was purified and characterized and its ability to transform phenolic compounds was determined. The purified laccase had activity towards typical substrates of laccases including 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS), dimethoxyphenol (2,6-DMP), syringaldazine and hydroquinone. The enzyme was a monomeric protein with an apparent molecular mass of 80 kDa and an isoelectric point of 3.5. The pH optima for the oxidation of ABTS and 2,6-DMP were 3 and 5, respectively, and the optimum temperature was 50 °C with 2,6-DMP. The laccase was stable at slightly acidic pH (4 and 5). It retained 80% of its activity after 4 h incubation at 40 °C. Under standard assay conditions, K_m values of the enzyme were 2.5 and 1.6 mM towards ABTS and 2,6-DMP, respectively. This enzyme was able to oxidize aromatic compounds present in industrial and agricultural wastewater, as catechol and o-cresol, although the transformation of chlorinated phenols required the presence of ABTS as mediator.     

Pre-treatment of hospital wastewater by coagulation–flocculation and flotation

Coagulation–flocculation and flotation processes were evaluated for the pre-treatment of hospital wastewater, including the removal of 13 pharmaceutical and personal care products (PPCPs). Coagulation–flocculation assays were performed in a Jar-Test device and in a continuous pilot-scale plant. Raw hospital wastewater as well as the effluent from the continuous coagulation plant were treated in a flotation cell. Removal of total suspended solids (TSS) during pre-treatment was very effective, reaching an average removal efficiency of 92% in the combined coagulation–flotation process. Musk fragrances were eliminated to a high degree during batch coagulation–flocculation (tonalide: 83.4 ± 14.3%; galaxolide: 79.2 ± 9.9%; celestolide: 77.7 ± 16.8%), presumably due to their strong lipophilic character which promotes the interaction of these compounds with the lipid fraction of solids. For diclofenac (DCF), naproxen (NPX) and ibuprofen (IBP) maximum removals of 46%, 42% and 23%, respectively, were obtained, while the rest of PPCPs were not affected by the physico-chemical treatment. Flotation of raw wastewater led to slightly worse results compared to coagulation–flocculation, although the combined action of both improved the overall efficiency of the process. The proposed pre-treatment strategy for hospital wastewater is useful for assimilating its conventional physico-chemical characteristics to that of municipal wastewater as well as for reducing the load of some PPCPs into the sewer system.     

Heterologous production of a temperature and pH-stable laccase from Bacillus vallismortis fmb-103 in Escherichia coli and its application

To enhance laccase yield, the laccase gene from Bacillus vallismortis fmb-103 was cloned and heterologously expressed in Escherichia coli BL21 (DE3) cells. The auto-induction strategy was applied during fermentation, and the process was controlled, as follows: Cu²⁺ was added when the optical density at 600 nm (OD₆₀₀) was 0.3, the fermentation temperature was adjusted to 16 °C when the OD₆₀₀ was 0.9, and fermentation was stopped after 50 h. The yield of recombinant laccase was up to 3420 U/L, as assayed by 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid). Recombinant laccase was purified 4.47-fold by heating for 10 min at 70 °C and dialyzing against 50–60% ammonium sulfate, retained more than 50% activity after 10 h at 70 °C, and demonstrated broad pH stability. Malachite green was efficiently degraded by recombinant laccase, especially in combination with mediators. These results provided a basis for the future application of recombinant laccase to malachite green degradation.     

Characterization and kinetic properties of the purified Trematosphaeria mangrovei laccase enzyme

The properties of Trematosphaeria mangrovei laccase enzyme purified on Sephadex G-100 column were investigated. SDS–PAGE of the purified laccase enzyme showed a single band at 48 kDa. The pure laccase reached its maximal activity at temperature 65 °C, pH 4.0 with K_m equal 1.4 mM and V_max equal 184.84 U/mg protein. The substrate specificity of the purified laccase was greatly influenced by the nature and position of the substituted groups in the phenolic ring. The pure laccase was tested with some metal ions and inhibitors, FeSO₄ completely inhibited laccase enzyme and also highly affected by (NaN₃) at a concentration of 1 mM. Amino acid composition of the pure enzyme was also determined. Carbohydrate content of purified laccase enzyme was 23% of the enzyme sample. The UV absorption spectra of the purified laccase enzyme showed a single peak at 260–280 nm.     

Biochemical and molecular characterization of a novel laccase from selective lignin-degrading white-rot fungus Echinodontium taxodii 2538

A novel laccase was isolated and characterized from a new selective lignin-degrading white-rot fungus Echinodontium taxodii 2538, in which a high yield of laccase was obtained. No laccase isoenzyme was detected in the synthetic liquid media. The purified laccase (designated as EtL2538) had an apparent molecular mass of 56 kDa, pI value of 3.1, and N-terminal amino acid sequence of GIGPVTDLHIVNAAV. EtL2538 showed optimum pH at 3.0 and optimum temperature at 60 °C using ABTS as the substrate. EtL2538 revealed superior thermostability, and retained over 80% of its original activity after incubation for 2 h at 50 °C. The laccase gene, etl2538, was also cloned and sequenced. This gene encoded a mature laccase protein containing 499 amino acids (aa) preceded by a signal peptide of 21 aa, and the deduced protein sequence contained four copper-binding conserved domains of typical laccase protein. EtL2538 was further used in lignin oxidation and dye decolorization. Even without the existence of redox mediators, EtL2538 could cleave the methoxyl groups and β-O-4 ether linkages in lignin from bamboo, and significantly decolorize malachite green and RBBR. These novel properties of EtL2538 may render it as a potential biocatalyst for biotechnological and environmental applications.     

Cloning,expression, and characterization of a thermostable and pH-stable laccase from Klebsiella pneumoniae and its application to dye decolorization

A thermostable and pH-stable laccase from Klebsiella pneumoniae was cloned and expressed in Escherichia coli. The recombinant laccase (rLac) achieved a specific activity of 7.12 U/mg after purification by Ni-affinity chromatography. Optimal enzyme activity was observed at pH 4.0 and 35 °C for 2,2′-azino-bis (3-ethylbenzthiazoline sulfonic acid) (ABTS) oxidization and pH 8.0 and 70 °C for 2,6-dimethoxyphenol (2,6-DMP) oxidization. Thermostability and pH stability studies showed that the rLac was stable over the range of 30–70 °C and pH 5.0–9.0 using 2,6-DMP as substrate. Circular dichroism analysis suggested that the secondary structure of the rLac mainly consisted of α-helix that played a vital role in maintaining laccase activity and revealed the potential mechanisms for the changes in laccase activity under varying pHs (3.0–11.0) and temperatures (20–90 °C). Finally, the rLac could decolorize the tested dyes with high decolorization efficiency.     

Laccase mediator system for activation of agarose gel: Application for immobilization of proteins

Cross-linked Sepharose beads were treated with laccase–TEMPO system for oxidation of the primary alcohol groups on the sugar moieties. Optimal activation conditions using Trametes versicolor laccase were at pH 5 and 22 °C, giving an aldehyde content of 55 μmol g⁻¹ Sepharose with 28 units g⁻¹ of laccase and 12.5 mM TEMPO. The activated Sepharose was used for immobilization of trypsin as model protein. Highest degree of immobilization was obtained at pH 10.5 but the activity yield was only 31% of that loaded on the gel. The yield of gel bound trypsin activity was increased to 76% (corresponding to about 43 U g⁻¹ Sepharose) when the immobilization was performed in the presence of trypsin inhibitor, benzamidine. The immobilization yields were comparable to that obtained on the matrix activated using sodium periodate (containing 72 μmol aldehyde per g Sepharose). Recycling and storage of the immobilized trypsin preparations showed high stability of the enzyme bound to laccase–TEMPO activated gel.     

Textile dye degrading laccase from Pseudomonas desmolyticum NCIM 2112

A laccase requiring optimum temperature 60 °C, pH 4.0 for the activity and having apparent molecular weight 43,000 Da was purified from Pseudomonas desmolyticum NCIM 2112 by three steps, including heating, anion exchange, and molecular sieve chromatography. The purification fold and yield of laccase obtained through Biogel P100 were 45.75 and 19%, respectively. Staining of native gel with L-dopa showed dark brown color band indicating the presence of laccase. In relation to hydroquinone, the substrate specificity of laccase was in the following order: DAB > o-tolidine > ABTS > L-dopa. The absence of monophenolase activity in eluted fractions conformed that the purified protein is laccase. This laccase showed substrate dependent optimum pH character. Effect of inhibitor and metal ion on enzyme activity was analyzed. UV–vis analysis showed the decolorization of Direct Blue-6, Green HE4B and Red HE7B in the presence of laccase. The FTIR spectral comparison between the control dye sample and the metabolites extracted after decolorization by purified laccase have confirmed degradation of these dyes. This study contributes for the structural requirement of a dye to be degradable by P. desmolyticum laccase and is important in order to optimize potential bioremediation systems for industrial textile process water treatment.     

Fermentation process for continuous production of succinic acid in a fibrous bed bioreactor

Succinic acid (SA) was produced from Actinobacillus succinogenes with high cell density by continuous fermentation using fibrous bed bioreactor (FBB). The effects of feeding glucose concentration, dilution rate, and pH on continuous production of SA were examined to achieve an efficient and economical bioprocess. The optimum feeding glucose concentration, dilution rate, and pH were 80 g/L, 0.05 1/h, and 6.0–6.5, respectively. A SA concentration of 55.3 ± 0.8 g/L, productivity of 2.77 ± 0.04 g/L/h, and yield of 0.8 ± 0.02 g/g were obtained, and the continuous fermentation exhibited long-term stability for as long as 18 days (440 h) with no obvious fluctuations in both SA and biomass levels. The Jerusalimsky equation for the specific rate of SA production presented the inhibition phenomenon of the product, demonstrating that 60 g/L SA might be a critical concentration in this continuous FBB system. The results obtained could be beneficial for future fermentor designs and improvements in SA production.     

A novel biotransformation of astragalosides to astragaloside IV with the deacetylation of fungal endophyte Penicillium canescens

Under the deacetylation of fungal endophyte Penicillium canescens, which was isolated from pigeon pea, a novel and highly efficient biotransformation method of astragalosides to astragaloside IV in Radix Astragali was investigated. After single factor tests of the biotransformation procedure, the optimum biotransformation conditions were confirmed as the liquid solid ratio 20:1, the biotransformation temperature 30 °C, time 36 h and pH 7, respectively. Final content of astragaloside IV in Radix Astragali reached 7.66 ± 0.44 mg/g, which was 5.51-fold to that of untreated one and contents of astragaloside I and astragaloside II significantly decreased. The immobilized Ca-alginate gel beads with P. canescens could be reused at least for 13 runs. This is the first report that fungal endophyte was applied for the biotransformation of astragalosides to astragaloside IV in Radix Astragali and this novel high-efficiency biotransformation method will be an alternative to enhance the content of astragaloside IV in Radix Astragali in commercial process.     

Characterization of a novel laccase from the isolated Coltricia perennis and its application to detoxification of biomass

A highly efficient laccase-producing fungus was isolated from soil and identified as Coltricia perennis SKU0322 by its morphology and by comparison of its internal transcribed spacer (ITS) rDNA gene sequence. Extracellular laccase (Cplac) from C. perennis was purified to homogeneity by anion-exchange and gel filtration chromatography. Cplac is a monomeric glycoprotein with 12% carbohydrate content and a molecular mass of 66 kDa determined by polyacrylamide-gel electrophoresis. Ultraviolet-visible absorption spectroscopy observed type 1 and type 3 copper signals from Cplac. The enzyme acted optimally at pH 3–4 and 75 °C. Its optimal activity was with 2,2-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS), it also oxidized various lignin-related phenols. The enzyme was characterized as a multi-copper blue laccase by its substrate specificity and internal amino acid sequence. It showed a higher catalytic efficiency towards ABTS (k_cat/K_m = 18.5 s^?1 μM^?1) and 2,6-dimethoxyphenol (k_cat/K_m = 13.9 s^?1 μM^?1) than any other reported laccase. Its high stability and catalytic efficiency suggest its suitability for industrial applications: it detoxified phenolic compounds in acid-pretreated rice straw and enhanced saccharification yield.     

Purification and characterization of a periplasmic laccase produced by Sinorhizobium meliloti

Sinorhizobium meliloti CE52G strain produces a periplasmic laccase that has been purified by a two-step procedure involving heat treatment and immobilized metal affinity chromatography (IMAC). The fraction with laccase activity retained its original activity after 24 h of incubation at pH between 4.0 and 8.0 and after 3 h of incubation at 70 °C, pH 7.2 and supplemented with 1.3 M (NH₄)₂SO₄. It proved to be a homodimeric protein with an apparent molecular mass of 45 kDa each subunit and an isoelectric point of 6.2. CE52G laccase was inhibited by halides (NaF and NaCl), ions (Fe³⁺, Mn²⁺, and Cu²⁺), sulfhydryl organic compounds (β-mercaptoethanol and reduced glutathione), and electron flow inhibitors (NaCN and NaF). Laccase activity was strongly enhanced by (NH₄)₂SO₄, Na₂SO₄, and K₂SO₄. The effects of all these agents, as well as the probability of a partially unfolding polypeptide chain to enhance the interaction between the substrate and the active site, are discussed. CE52G laccase is a pH- and thermo-stable protein with promising biotechnological applications.     

Purification and characterization of a new laccase from Shiraia sp.SUPER-H168

A new laccase from Shiraia sp.SUPER-H168 was purified by ion exchange column chromatography and gel permeation chromatography and the apparent molecular mass of this enzyme was 70.78 kDa, as determined by MALDI/TOF-MS. The optimum pH value of the purified laccase was 4, 6, 5.5 and 3 with 2,6-dimethoxyphenol (DMP), syringaldazine, guaiacol and 2,2′-azinobis-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) as substrates, respectively. The optimum temperature of the purified laccase was 50 °C using DMP, syringaldazine and guaiacol as substrates, but 60 °C for ABTS. Inhibitors and metal ions of SDS, NaN₃, Ag⁺ and Fe³⁺ showed inhibition on enzyme activity of 10.22%, 7.86%, 8.13% and 67.50%, respectively. Fe²⁺ completely inhibited the purified laccase. The K_cat/K_m values of the purified laccase toward DMP, ABTS guaiacol and syringaldazine were 3.99 × 10⁶, 3.74 × 10⁷, 8.01 × 10⁴ and 2.35 × 10⁷ mol^?1 L S^?1, respectively. The N-terminal amino acid sequence of the purified laccase showed 36.4% similarity to Pleurotus ostrestus. Approximately 66% of the Acid Blue 129 (100 mg L^?1) was decolorized by 2.5 U of the purified laccase after a 120 min incubation at 50 °C. Acid Red 1 (20 mg L^?1) and Reactive Black 5 (50 mg L^?1) were decolorized by the purified laccase after the addition of Acid Blue 129 (100 mg L^?1).     

Purification and characterization of an extracellular laccase from a Pseudomonas sp. LBC1 and its application for the removal of bisphenol A

The Pseudomonas sp. LBC1 produced extracellular laccase when grown in the nutrient broth. The enzyme was purified using acetone precipitation and an anion-exchange chromatography. The molecular weight of the purified laccase was estimated as 70 kDa by sodium dodecyl sulfate polyacrylamide gel electrophoresis. An enzyme showed maximum substrate specificity towards o-tolidine than other substrates of laccase including 2,2′-azinobis, 3-ethylbenzothiazoline-6-sulfonic acid, hydroquinone, N,N′-dimethyl phenylene diamine, syringic acid and veratryl alcohol. The optimum pH and temperature for the laccase activity were 4.0 and 40 °C, respectively. Cyclic voltammogram revealed the redox potential of purified enzyme as 0.30 V. The laccase was stable up to 40 °C and within pH range 6.0–8.0. Sodium azide and EDTA strongly inhibited laccase activity. The purified laccase completely degraded the higher concentration of bisphenol A within 5 h. Biodegradation metabolites of bisphenol A were characterized by using FTIR, HPLC and GC–MS.     

Pathways and kinetics analysis of biotransformation of Dioscorea zingiberensis by Aspergillus oryzae

In this paper, the pathways and kinetics for the production of diosgenin via biotransformation of Dioscorea zingiberensis C.H. Wright by Aspergillus oryzae CICC 2436 were analyzed. After 120 h of biotransformation at 30 °C, the concentration of diosgenin in the culture reached 36.87 ± 1.27 μmol/g raw herb, which was 21.2 times its initial concentration. A number of steroidal compounds were also isolated as minor products from the biotransformation, and one of these was identified as a novel compound named 3-O-β-d-glucopyranosyl (1 → 3) – β-d-glucopyranosyl (1 → 4) – β-d-glucopyranosyl-diosgenin (diosgenin-triglucoside). The biotransformation consisted of two stages: the release of steroids from the herb (accompanied by fungal growth) and hydrolysis of the steroids by glycosidases. Kinetic analysis and mathematical modelling showed that the process of biotransformation could be described by first-order kinetics under the condition of high K_m/[S] values. It consisted of a cascade of consecutive and parallel reactions involving three kinds of enzymes, five steroid saponins and their sapogenin. The main hydrolysis reactions that led to the production of diosgenin were also discussed.     

A novel membrane-surface liquid co-culture to improve the production of laccase from Ganoderma lucidum

In this work, a laccase producer, Ganoderma lucidum, was separated and identified according to its morphological characteristics and phylogenetic data. A 4000 U/l and 8500 U/l of laccase activity was obtained in 500 ml flask by submerged culture and biomembrane-surface liquid culture (BSLC), respectively. Furthermore, the novel biomembrane-surface liquid co-culture (BSLCc) was developed by adding Saccharomyces cerevisiae to reactor in order to shorten the fermentation period and improve laccase production. Laccase activity obtained by BSLCc, 23 000 U/l, is 5.8 and 2.7 times of that obtained by submerged culture and BSLC, respectively. In addition, laccase production by BSLCc was successfully scaled-up to 100 l reactor, and 38 000 U/l of laccase activity was obtained on day 8. The mechanism of overproducing laccase by BSLCc was investigated by metabolism pathway analysis of glucose. The results show glucose limitation in fermentation broth induces the secretion of laccase. The addition of S. cerevisiae, on one hand, leads to an earlier occurrence of glucose limitation state, and thus shortens the fermentation time; on the other hand, it also results in the appearance of a series of metabolites of the yeast including organic acids, ethanol, glycerol and so forth in fermentation broth, and both polyacrylamide gel electrophoresis analysis and enzyme activity detection of laccase show that these metabolites contribute to the improvement of laccase activity.     

Purification of a thermostable laccase from Leucaena leucocephala using a copper alginate entrapment approach and the application of the laccase in dye decolorization

Laccase from a tree legume, Leucaena leucocephala, was purified to homogeneity using a quick two-step procedure: alginate bead entrapment and celite adsorption chromatography. Laccase was purified 110.6-fold with an overall recovery of 51.0% and a specific activity of 58.5 units/mg. The purified laccase was found to be a heterodimer (∼220 kDa), containing two subunits of 100 and 120 kDa. The affinity of laccase was found to be highest for catechol and lowest for hydroquinone, however, highest K_cat and K_cat/K_m were obtained for hydroquinone. Purified laccase exhibited pH and temperature optima of 7.0 and 80 °C, respectively. Mn²⁺, Cd²⁺, Fe²⁺, Cu²⁺ and Na⁺ activated laccase while Ca²⁺ treatment increased laccase activity up to 3 mM, beyond which it inhibited laccase. Co²⁺, Hg²⁺, DTT, SDS and EDTA showed an inhibition of laccase activity. The Leucaena laccase was found to be fairly tolerant to organic solvents; upon exposure for 1 h individually to 50% (v/v) each of ethanol, DMF, DMSO and benzene, more than 50% of the activity was retained, while in the presence of 50% (v/v) each of methanol, isopropanol and chloroform, a 40% residual activity was observed. The purified laccase efficiently decolorized synthetic dyes such as indigocarmine and congo red in the absence of any redox mediator.