Biosensing approach for alcohol determination using immobilized alcohol oxidase

Alcohol oxidase (AOD) was immobilized in polypyrrole (PPy) and a random copolymer containing 3-methylthienyl methacrylate and p-vinylbenzyloxy poly(ethyleneoxide) matrices. Immobilization of enzyme was performed via entrapment in conducting polymers during electrochemical polymerization of pyrrole through the thiophene moiety of the copolymer. Three different alcohols, namely methanol, ethanol and n-propanol, were used as substrates. Maximum reaction rates, Michaelis–Menten constants, optimum temperature and pH values, operational stabilities and shelf life of the enzyme electrodes were investigated.     

Characterization and Molecular Cloning of a Novel Enzyme, Inorganic Polyphosphate/ATP-Glucomannokinase, of Arthrobacter sp. Strain KM

A bacterium exhibiting activities of several inorganic polyphosphate [poly(P)]- and ATP-dependent kinases, including glucokinase, NAD kinase, mannokinase, and fructokinase, was isolated, determined to belong to the genus Arthrobacter, and designated Arthrobacter sp. strain KM. Among the kinases, a novel enzyme responsible for the poly(P)- and ATP-dependent mannokinase activities was purified 2,200-fold to homogeneity from a cell extract of the bacterium. The purified enzyme was a monomer with a molecular mass of 30 kDa. This enzyme phosphorylated glucose and mannose with a high affinity for glucose, utilizing poly(P) as well as ATP, and was designated poly(P)/ATP-glucomannokinase. The K_m values of the enzyme for glucose, mannose, ATP, and hexametaphosphate were determined to be 0.50, 15, 0.20, and 0.02 mM, respectively. The catalytic sites for poly(P)-dependent phosphorylation and ATP-dependent phosphorylation of the enzyme were found to be shared, and the poly(P)-utilizing mechanism of the enzyme was shown to be nonprocessive. The gene encoding the poly(P)/ATP-glucomannokinase was cloned from Arthrobacter sp. strain KM, and its nucleotide sequence was determined. This gene contained an open reading frame consisting of 804 bp coding for a putative polypeptide with a calculated molecular mass of 29,480 Da. The deduced amino acid sequence of the polypeptide exhibited homology to the amino acid sequences of the poly(P)/ATP-glucokinase of Mycobacterium tuberculosis H37Rv (level of homology, 45%), ATP-dependent glucokinases of Corynebacterium glutamicum (45%), Renibacterium salmoninarum (45%), and Bacillus subtilis (35%), and proteins of bacteria belonging to the order Actinomyces whose functions are not known. Alignment of these homologous proteins revealed seven conserved regions. The mannose and poly(P) binding sites of poly(P)/ATP-glucomannokinase are discussed.     

Behavior of glucose oxidase immobilized in various electropolymerized thin films

Glucose oxidase was immobilized by electropolymerization into films of polyaniline, polyindole, polypyrrole, poly(o-phenylediamine), and polyaniline crosslinked with p-phenylenediamine. The kinetics and the behavior of the entrapped enzyme toward elevated temperature, organic solvent denaturation, and pH were investigated, along with the response of the films to electroactive species such as acetaminophen, ascorbate, cysteine, and uric acid. For most of the films, linearity to glucose extended from 7 to 10 mM. The poly(o-phenylenediamine)/glucose oxidase film gave the best signal/noise ratio and polypyrrole/glucose oxidase film gave the most reproducible current responses. No significant shift of the optimum reaction pH (5.5), except for polypyrrole (5.0), was observed after immobilization of glucose oxidase in the various films. Enzymatic activity decreased rapidly when pH was raised above 7.5. Thermodeactivation studies at 55 degrees , 60 degrees , and 65 degrees C have shown polypyrrole/and poly(o-phenylediamine)/glucose oxidase films to be the most resistant enzymatic films. Poly(o-phenylenediamine) films offered the best protection against glucose oxidase deactivation in hexane, chloroform, ether, THF, and acetonitrile when compared with the other electropolymerized films. All the enzymatic films exhibited permselection toward electroactive species. (c) 1996 John Wiley & Sons, Inc.     

The antitumor effect of the Toll-like receptor 3 ligand polyinosinic-cytidylic acid as an adjuvant

Although polyinosinic-polycytidylic acid (poly(I:C)) has been applied in tumor immunity as a Toll-like receptor 3 (TLR3) ligand, the interaction between poly(I:C) and TLR3 is still unclear, as are the mechanisms underlying the antitumor effect of poly(I:C). Our aim was to investigate the interaction between poly(I:C) and TLR3, as well as the mechanisms underlying the antitumor effect of poly(I:C). NK92 cells were maintained in medium (untreated group), or medium containing E7(44–62) (E7 group) or E7(44–62)+poly(I:C) (poly(I:C)/E7 group), and we measured the expression of TLR3 mRNA, p-p65, and IκB-α protein. The cells were first incubated in medium alone or medium containing TLR3 monoclonal antibody, and then in medium containing poly(I:C)/E7. Finally, we measured the level of interferon-beta (INF-β) in the supernatant and determined the tumor cell–killing effect of the NK92 cells. At 1 h, the expression of TLR3 mRNA in the poly(I:C)/E7 group was markedly higher than that in the untreated and E7 groups (P < 0.05). When compared with the poly(I:C)/E7 group, the expression of IκB-α was dramatically increased in the E7 and untreated groups, and the expression of p-p65 was dramatically decreased in the E7 and untreated groups (all P < 0.05). At 24 h, INF-β content and tumor cell–killing activity in the poly(I:C)/E7 group were markedly higher than those in the untreated group (P < 0.001, <0.05, respectively). Treatment with TLR3 monoclonal antibody significantly inhibited poly(I:C)/E7-induced INF-β secretion and tumor cell–killing activity in NK92 cells (P < 0.001, <0.05, respectively). The interaction between poly(I:C) and TLR3 plays an important role in the antitumor immunity of NK92 cells. In addition, the interaction between poly(I:C) and TLR3 increases INF-β expression, which may be attributed to the activation of NFκB.     

The oxidation of alkylaryl sulfides and benzo[b]thiophenes by Escherichia coli cells expressing wild-type and engineered styrene monooxygenase from Pseudomonas putida CA-3

Nine different sulfur-containing compounds were biotransformed to the corresponding sulfoxides by Escherichia coli Bl21(DE3) cells expressing styrene monooxygenase (SMO) from Pseudomonas putida CA-3. Thioanisole was consumed at 83.3 μmoles min^?1 g cell dry weight^?1 resulting mainly in the formation of R-thioanisole sulfoxide with an enantiomeric excess (ee) value of 45 %. The rate of 2-methyl-, 2-chloro- and 2-bromo-thioanisole consumption was 2-fold lower than that of thioanisole. Surprisingly, the 2-methylthioanisole sulfoxide product had the opposite (S) configuration to that of the other 2-substituted thioanisole derivatives and had a higher ee value (84 %). The rate of oxidation of 4-substituted thioanisoles was higher than the corresponding 2-substituted substrates but the ee values of the products were consistently lower (10–23 %). The rate of benzo[b]thiophene and 2-methylbenzo[b]thiophene sulfoxidation was approximately 10-fold lower than that of thioanisole. The ee value of the benzo[b]thiophene sulfoxide could not be determined as the product racemized rapidly. E. coli cells expressing an engineered SMO (SMOeng R3-11) oxidised 2-substituted thioanisoles between 1.8- and 2.8-fold faster compared to cells expressing the wild-type enzyme. SMOeng R3-11 oxidised benzo[b]thiophene and 2-methylbenzo[b]thiophene 10.1 and 5.6 times faster that the wild-type enzyme. The stereospecificity of the reaction catalysed by SMOeng was unchanged from that of the wild type. Using the X-ray crystal structure of the P. putida S12 SMO, it was evident that the entrance of substrates into the SMO active site is limited by the binding pocket bottleneck formed by the side chains of Val-211 and Asn-46 carboxyamide group.     

Functional polymeric supports for immobilization of cholesterol oxidase

Here, we have reported the useful functional polymeric supports for possible application of enzyme immobilization. Functional polymers were prepared by free radical polymerization from different monomers (i.e., methylmetacrylate, glycidylmethacrylate, acrylamide, etc.) and N,N-methylenebis(acrylamide) (MBAAm) crosslinker. Cholesterol oxidase (ChOx) [EC.1.1.3.6] was then covalently immobilized onto these functional supports via epichlorohydrin (ECH) and carbodiimide (EDAC) as the activating agents. It was observed that, after 60th use in 5 days, the retained activities for immobilized enzymes onto poly(methyl methacrylate-co-glycidyl methacrylate) [P(MMA-co-GMA)] and poly(acrylamide-co-acrylic acid)/polyethyleneimine [P(AAm-co-AA)/PEI] supports were found as 56% and 83%, respectively.     

Control of synthesis of functional mRNA coding for phenylalanine ammonia-lyase from Rhodosporidium toruloides

The regulation of functional mRNA coding for phenylalanine ammonia-lyase (PAL) from Rhodosporidium toruloides was investigated. Polyadenylic acid [poly(A)]-containing RNA was an efficient template for in vitro translation in rabbit reticulocyte lysate. Non-poly(A)-containing RNA did not stimulate in vitro protein synthesis. Several lines of experimental evidence indicate that mRNA from R. toruloides directs PAL synthesis in reticulocyte lysate: (i) the major radioactive product in immunoprecipitates when lysates, incubated with yeast poly(A)-containing RNA, were reacted with PAL-antiserum had the same molecular weight as native PAL (75,000); (ii) this major radioactive product competes with authentic PAL for binding to PAL-antiserum; and (iii) partial proteolytic peptide maps of the in vitro translation product were very similar to those of native PAL. The levels of functional mRNA coding for PAL, when R. toruloides was grown in different physiological conditions, were determined by quantitation of PAL synthesized in vitro when RNA was added to reticulocyte lysate. Functional PAL mRNA was six times higher in yeast grown on phenylalanine compared with glucose-phenylalanine minimal medium. No functional PAL mRNA was detected in yeast grown on glucose-ammonia minimal medium in the presence or absence of phenylalanine. These observed changes in functional PAL mRNA were similar to levels of PAL catalytic and antigenic activity. The kinetics of functional PAL mRNA synthesis and degradation were studied. Maximum levels of functional PAL mRNA were observed within 60 min of transfer to PAL-inducing growth conditions. Poly(A)-containing RNA and functional PAL mRNA were rapidly degraded when cells were transferred from phenylalanine to glucose-ammonia minimal medium, with half-lives of 25 and 10 min, respectively. Thus, it is suggested that the alterations in the amount of PAL in cells of R. toruloides grown in different physiological conditions primarily result from alteration in the amount of functional mRNA coding for the enzyme.     

A novel yeast cell-based screen identifies flavone as a tankyrase inhibitor

The telomere-associated protein tankyrase 1 is a poly(ADP-ribose) polymerase and is considered to be a promising target for cancer therapy, especially for BRCA-associated cancers. However, an efficient assay system for inhibitor screening has not been established, mainly due to the difficulty of efficient preparation of the enzyme and its substrate. Here, we report a cell-based assay system for detecting inhibitory activity against tankyrase 1. We found that overexpression of the human tankyrase 1 gene causes a growth defect in the fission yeast Schizosaccharomyces pombe. Chemicals that restore the growth defect phenotype can be identified as potential tankyrase 1 inhibitors. We performed a high-throughput screen using this system, and identified flavone as a compound that restores the growth of yeast cells overexpressing tankyrase 1. Indeed, flavone inhibited poly(ADP-ribosyl)ation of proteins caused by overexpression of tankyrase 1 in yeast cells. This system allows rapid identification of inhibitory activity against tankyrase 1 and is amenable to high-throughput screening using robotics.     

Affinity purification and characterization of a biodegradable plastic-degrading enzyme from a yeast isolated from the larval midgut of a stag beetle, Aegus laevicollis

Two yeast strains, which have the ability to degrade biodegradable plastic films, were isolated from the larval midgut of a stag beetle, Aegus laevicollis. Both of them are most closely related to Cryptococcus magnus and could degrade biodegradable plastic (BP) films made of poly(butylene succinate) (PBS) and poly(butylene succinate-co-adipate) (PBSA) effectively. A BP-degrading enzyme was purified from the culture broth of one of the isolated strains employing a newly developed affinity purification method based on the binding action of the enzyme to the substrate (emulsified PBSA) and its subsequent degradative action toward the substrate. Partial amino acid sequences of this enzyme suggested that it belongs to the cutinase family, and thus, the enzyme was named CmCut1. It has a molecular mass of 21 kDa and a degradative activity for emulsified PBSA which was significantly enhanced by the simultaneous presence of Ca²⁺ or Mg²⁺ at a concentration of about 2.5 mM. Its optimal pH was 7.5, and the optimal temperature was 40 °C. It showed a broad substrate specificity for p-nitrophenyl (pNP)-fatty acid esters ranging from pNP-acetate (C2) to pNP-stearate (C18) and films of PBSA, PBS, poly(ε-caprolactone), and poly(lactic acid).     

Immobilization ofArthrobacter simplex cells in thermally reversible hydrogels: Comparative effects of organic solvent and polymeric surfactant on steroid conversion

Summary Organic solvents have sometimes been used to increase the solubility of water insoluble substrates for steroid transformation using immobilized whole cells, even though the cell viability is often damaged. Polymeric surfactants which form micelles in aqueous solutions could be used instead of organic solvents to solubilize the steroid. We have successfully utilized this approach by employing a poly(dimethyl siloxane)-poly(ethyleneoxide) (PDMS-PEO) block copolymer surfactant to enhance conversion of hydrocortisone to prednisolone by immobilizedArthrobacter simplex cells, without deactivation of the immobilized cells.     

Synthesis of polypyrrole within the cell wall of yeast by redox-cycling of [Fe(CN)6]3−/[Fe(CN)6]4−

Yeast cells are often used as a model system in various experiments. Moreover, due to their high metabolic activity, yeast cells have a potential to be applied as elements in the design of biofuel cells and biosensors. However a wider application of yeast cells in electrochemical systems is limited due to high electric resistance of their cell wall. In order to reduce this problem we have polymerized conducting polymer polypyrrole (Ppy) directly in the cell wall and/or within periplasmic membrane. In this research the formation of Ppy was induced by [Fe(CN)₆]³⁻ions, which were generated from K₄[Fe(CN)₆], which was initially added to polymerization solution. The redox process was catalyzed by oxido-reductases, which are present in the plasma membrane of yeast cells. The formation of Ppy was confirmed by spectrophotometry and atomic force microscopy. It was confirmed that the conducting polymer polypyrrole was formed within periplasmic space and/or within the cell wall of yeast cells, which were incubated in solution containing pyrrole, glucose and [Fe(CN)₆]⁴⁻. After 24 h drying at room temperature we have observed that Ppy-modified yeast cell walls retained their initial spherical form. In contrast to Ppy-modified cells, the walls of unmodified yeast have wrinkled after 24 h drying. The viability of yeast cells in the presence of different pyrrole concentrations has been evaluated.     

Ethanol production from raw starch by simultaneous fermentation using Schizosaccharomyces pombe and a raw starch saccharifying enzyme from Corticium rolfsii

Alcoholic fermentation from raw corn starch using Schizosaccharomyces pombe AHU 3179 and a raw starch saccharifying enzyme (RSSE) from Corticium rolfsii AHU 9627 was investigated. The optimum ethanol production was achieved at pH 3.5, 27°C and under the yeast cell concentration of 2.7 × 10⁹ cells/ml. Addition of RSSE 5 units (as glucoamylase)/g raw corn starch was found sufficient. Under these optimum conditions, 18.5% (v/v, at 15°C) ethanol was obtained from 30% raw corn starch (30.8% as glucose) after incubation for 48 h.     

tRNA Nuclear Export in Saccharomyces cerevisiae: In Situ Hybridization Analysis

To understand the factors specifically affecting tRNA nuclear export, we adapted in situ hybridization procedures to locate endogenous levels of individual tRNA families in wild-type and mutant yeast cells. Our studies of tRNAs encoded by genes lacking introns show that nucleoporin Nup116p affects both poly(A) RNA and tRNA export, whereas Nup159p affects only poly(A) RNA export. Los1p is similar to exportin-t, which facilitates vertebrate tRNA export. A los1 deletion mutation affects tRNA but not poly(A) RNA export. The data support the notion that Los1p and exportin-t are functional homologues. Because LOS1 is nonessential, tRNA export in vertebrate and yeast cells likely involves factors in addition to exportin-t. Mutation of RNA1, which encodes RanGAP, causes nuclear accumulation of tRNAs and poly(A) RNA. Many yeast mutants, including those with the rna1-1 mutation, affect both pre-tRNA splicing and RNA export. Our studies of the location of intron-containing pre-tRNAs in the rna1-1 mutant rule out the possibility that this results from tRNA export occurring before splicing. Our results also argue against inappropriate subnuclear compartmentalization causing defects in pre-tRNA splicing. Rather, the data support “feedback” of nucleus/cytosol exchange to the pre-tRNA splicing machinery.     

Cloning and expression of a chicken α-amylase gene

We have isolated and sequenced a genomic clone for a pancreatic α-amylase gene (amy) of the chicken (Gallus gallus). The gene is interrupted by nine introns, spans over 4 kb, and encodes a protein (AMY) of 512 aa that is 83% identical to the human pancreatic α-amylase enzyme. Southern blot analysis of chicken DNA revealed two distinct pancreatic amy loci. In addition, we have generated a cDNA from chicken pancreatic RNA corresponding to the coding sequence of the genomic clone. The cDNA was inserted into a yeast expression vector, and the resulting construct used to transform Saccharomyces cerevisiae cells. Transformed yeast cells synthesized and secreted active AMY enzyme, and the gel migration pattern of the α-amylase produced by the yeast cells was identical to that of the native chicken enzyme.     

Segments missing from the draft human genome sequence can be isolated by transformation-associated recombination cloning in yeast

The reported draft human genome sequence includes many contigs that are separated by gaps of unknown sequence. These gaps may be due to chromosomal regions that are not present in the Escherichia coli libraries used for DNA sequencing because they cannot be cloned efficiently, if at all, in bacteria. Using a yeast artificial chromosome (YAC)/ bacterial artificial chromosome (BAC) library generated in yeast, we found that approximately 6% of human DNA sequences tested transformed E. coli cells less efficiently than yeast cells, and were less stable in E. coli than in yeast. When the ends of several YAC/BAC isolates cloned in yeast were sequenced and compared with the reported draft sequence, major inconsistencies were found with the sequences of those YAC/BAC isolates that transformed E. coli cells inefficiently. Two human genomic fragments were re-isolated from human DNA by transformation-associated recombination (TAR) cloning. Re-sequencing of these regions showed that the errors in the draft are the results of both missassembly and loss of specific DNA sequences during cloning in E. coli. These results show that TAR cloning might be a valuable method that could be widely used during the final stages of the Human Genome Project.     

Electrophoresis of periodontal pathogens in poly(ethyleneoxide) solutions with uncoated capillary

Periodontitis is a prevalent inflammatory disease caused by different species of anaerobic bacteria such as Porphyromonas gingivalis (P.g), Treponema denticola (T.d), and Tannerella forsythia (T.f). We compared the separation result of DNA ladders in hydroxyethyl cellulose, poly(ethyleneoxide) (PEO), and polyethylene glycol and analyzed the effect of polymer concentration, electric field, and temperature of the background electrolyte on the separation performance. Results demonstrated that there was a linear relationship (R = 0.942) for 100 to 700 bp of DNA and its migration time. Finally, the polymerase chain reaction products of P.g, T.d, and T.f were successfully identified within 8.5 min in 0.5% PEO with uncoated capillary.     

Cordycepin-hypersensitive growth links elevated polyphosphate levels to inhibition of poly(A) polymerase in Saccharomyces cerevisiae

To identify genes involved in poly(A) metabolism, we screened the yeast gene deletion collection for growth defects in the presence of cordycepin (3′-deoxyadenosine), a precursor to the RNA chain terminating ATP analog cordycepin triphosphate. Δpho80 and Δpho85 strains, which have a constitutively active phosphate-response pathway, were identified as cordycepin hypersensitive. We show that inorganic polyphosphate (poly P) accumulated in these strains and that poly P is a potent inhibitor of poly(A) polymerase activity in vitro. Binding analyses of poly P and yeast Pap1p revealed an interaction with a k_D in the low nanomolar range. Poly P also bound mammalian poly(A) polymerase, however, with a 10-fold higher k_D compared to yeast Pap1p. Genetic tests with double mutants of Δpho80 and other genes involved in phosphate homeostasis and poly P accumulation suggest that poly P contributed to cordycepin hypersensitivity. Synergistic inhibition of mRNA synthesis through poly P-mediated inhibition of Pap1p and through cordycepin-mediated RNA chain termination may thus account for hypersensitive growth of Δpho80 and Δpho85 strains in the presence of the chain terminator. Consistent with this, a mutation in the 3′-end formation component rna14 was synthetic lethal in combination with Δpho80. Based on these observations, we suggest that binding of poly P to poly(A) polymerase negatively regulates its activity.     

Cellulosic ethanol production by combination of cellulase-displaying yeast cells

As an effort to find suitable endoglucanases to generate cellulolytic yeast strains, two fungal endoglucanases, Thermoascus aurantiacus EGI and Trichoderma reesei EGII, and two bacterial endoglucanases, Clostridium thermocellum CelA and CelD, were expressed on the yeast surface, and their surface expression levels, pH- and temperature-dependent enzyme activities, and substrate specificities were analyzed. T. aurantiacus EGI showed similar patterns of pH- and temperature-dependent activities to those of T. reesei EGII which has been widely used due to its high enzyme activity. Although EGII showed higher carboxymethyl cellulose (CMC) degradation activity than EGI, EGI showed better activity toward phosphoric acid swollen cellulose (PASC). For ethanol production from PASC, we combined three types of yeast cells, each displaying T. aurantiacus EGI, T. reesei CBHII (exoglucanase) and Aspergillus aculeatus BGLI (β-glucosidase), instead of co-expressing these enzymes in a single cell. In this system, ethanol production can be easily optimized by adjusting the combination ratio of each cell type. A mixture of cells with the optimized EGI:CBHII:BGLI ratio of 6:2:1 produced 1.3 fold more ethanol (2.1 g/l) than cells composed of an equal amount of each cell type, suggesting the usefulness of this system for cellulosic ethanol production.     

Dual compartmental localization and function of mammalian NADP+-specific isocitrate dehydrogenase in yeast

Isozymes of NADP⁺-specific isocitrate dehydrogenase (IDP) provide NADPH in cytosolic, mitochondrial, and peroxisomal compartments of eukaryotic cells. Analyses of purified IDP isozymes from yeast and from mouse suggest a general correspondence of pH optima for catalysis and pI values with pH values reported for resident cellular compartments. However, mouse IDP2, which partitions between cytosolic and peroxisomal compartments in mammalian cells, exhibits a broad pH optimum and an intermediate pI value. Mouse IDP2 was found to similarly colocalize in both cellular compartments when expressed in yeast at levels equivalent to those of endogenous yeast isozymes. The mouse enzyme can compensate for loss of yeast cytosolic IDP2 and of peroxisomal IDP3. Removal of the peroxisomal targeting signal of the mouse enzyme precludes both localization in peroxisomes and compensation for loss of yeast IDP3.