Production of human milk fat substitutes enriched in omega-3 polyunsaturated fatty acids using immobilized commercial lipases and Candida parapsilosis lipase/acyltransferase

In human milk fat (HMF), palmitic acid (20–30%), the major saturated fatty acid, is mostly esterified at the sn-2 position of triacylglycerols, while unsaturated fatty acids are at the sn-1,3 positions, conversely to that occurring in vegetable oils.This study aims at the production of HMF substitutes by enzyme-catalyzed interesterification of tripalmitin with (i) oleic acid (system I) or (ii) omega-3 polyunsaturated fatty acids (omega-3 PUFA) (system II) in solvent-free media. Interesterification activity and batch operational stability of commercial immobilized lipases from Rhizomucor miehei (Lipozyme RM IM), Thermomyces lanuginosa (Lipozyme TL IM) and Candida antarctica (Novozym 435) from Novozymes, DK, and Candida parapsilosis lipase/acyltransferase immobilized on Accurel MP 1000 were evaluated. After 24-h reaction at 60 °C, molar incorporation of oleic acid was about 27% for all the commercial lipases tested and 9% with C. parapsilosis enzyme. Concerning omega-3 PUFA, the highest incorporations were observed with Novozym 435 (21.6%) and Lipozyme RM IM (20%), in contrast with C. parapsilosis enzyme (8.5%) and Lipozyme TL IM (8.2%). In system I, Lipozyme RM IM maintained its activity for 10 repeated 23-h batches while for Lipozyme TL IM, Novozym 435 and C. parapsilosis enzyme, linear (half-life time, t_1/2 = 154 h), series-type (t_1/2 = 253 h) and first-order (t_1/2 = 34.5 h) deactivations were respectively observed. In system II, Lipozyme RM IM showed linear deactivation (t_1/2 = 276 h), while Novozym 435 (t_1/2 = 322 h) and C. parapsilosis enzyme (t_1/2 = 127 h), presented series-type deactivation. Both activity and stability of the biocatalysts depended on the acyl donor used.     

Process intensification of immobilized lipase catalysis by microwave irradiation in the synthesis of 4-chloro-2-methylphenoxyacetic acid (MCPA) esters

4-Chloro-2-methylphenoxyacetic acid (MCPA) is a selective systemic herbicide which is absorbed by leaves and roots. MCPA esters are preferred due to their low water solubility and environmental friendliness. Esterification of MCPA with n-butanol was investigated as a model reaction using immobilized enzymes under the influence of microwave irradiation. Different immobilized enzymes such as Novozym 435, Lipozyme TL IM, Lipozyme RM IM and Lipase AYS Amano were studied under microwave irradiation amongst which Novozym 435 (immobilized Candida antarctica lipase B) was the best catalyst. Effects of various parameters were systematically studied on rates and conversion. Under microwave irradiation, the initial rates were observed to increase up to 2-fold. Under optimized conditions of 0.1 mmol MCPA and 0.3 mmol n-butanol in 15 mL 1,4-dioxane as solvent, Novozym 435 showed a conversion of 83% at 60 °C in 6 h. Based on initial rate and progress curve data, the reaction was shown to follow the Ping Pong bi–bi mechanism with inhibition by MCPA and n-butanol. Esterification of MCPA was also studied with different alcohols such as isopropyl alcohol, n-pentanol, n-hexanol, benzyl alcohol and 2-ethyl-1-hexanol.     

Ectoine improves yield of biodiesel catalyzed by immobilized lipase

To improve the production of biodiesel by enzymatic conversion of triglycerides in cottonseed oil, compatible solutes were added to the solvent-free methanolysis system to prevent competitive methanol inhibition on the immobilized lipase (Novozym^® 435). The results indicated that the addition of ectoine increased biodiesel synthesis using a three-step methanol addition process. The concentration of methyl ester (ME) reached a maximum of 95.0% in the presence of 1.1 mmol/l ectoine, an increase of 20.9% compared to that in the absence of ectoine. On the other hand, excess ectoine decreased the ME concentration. Ectoine was also shown to enhance reuse of the immobilized lipase, significantly improving ME concentrations in each recycling test. Total concentrations of ME with added ectoine were about 1.5 times that without ectoine during five recycling tests (molar ratio of cottonseed oil to methanol, 1:4). Enzymatic reaction kinetics showed, in the concentration ranges of 0.8–1.14 mol/l and 0.03–8 mol/l for triglyceride and methanol, respectively, that ectoine had no effect on the initial reaction rates when methanol concentrations were below 0.5 mol/l. When methanol concentration exceeded 0.5 mol/l, the addition of 0.8 mmol/l ectoine increased the initial reaction rates, and the lipase exhibited a lower affinity for methanol and higher affinity for triglyceride (kinetic parameters of K_mA increase, K_mTG decrease). However, the initial reaction rates decreased significantly when 8 mmol/l ectoine was added, with the lipase having higher affinity for methanol and lower affinity for triglyceride (K_mA decrease, K_mTG increase). The supplementation of ectoine provided a new method for the purpose of improving yield of biodiesel catalyzed by enzyme.     

Lipase-catalyzed synthesis of capsiate analog using vanillyl alcohol and conjugated linoleic acid under vacuum system

This study focused on the application of vacuum system to synthesize capsiate analogs. The capsiate analogs containing conjugated linoleic acid (CLA) was successfully synthesized in solvent free system via lipase-catalyzed esterification. This esterification was carried out using vanillyl alcohol and CLA as substrates, and Lipozyme RM IM from Rhizomucor miehei as a biocatalyst. The best reaction condition was a molar ratio of 1:2 (vanillyl alcohol to CLA), a reaction temperature of 50 °C, and a lipase loading of 10% (w/w, based on total substrates). Application of vacuum increased the yield of capsiate analog as well as the reaction rate. When the vacuum levels were between 66.7 kPa and 1.3 kPa, an equilibrium yield of 100 mol% was achieved. The maximum yield was approached after only 3 h of reaction at the vacuum levels of higher than 13.3 kPa. The content of 9c,11t-CLA in capsiate analog synthesized was higher than that of 10t,12c-CLA.     

Lipase-catalyzed synthesis of palmitanilide: Kinetic model and antimicrobial activity study

Enzymatic syntheses of fatty acid anilides are important owing to their wide range of industrial applications in detergents, shampoo, cosmetics, and surfactant formulations. The amidation reaction of Mucor miehei lipase Lipozyme IM20 was investigated for direct amidation of triacylglycerol in organic solvents. The process parameters (reaction temperature, substrate molar ratio, enzyme amount) were optimized to achieve the highest yield of anilide. The maximum yield of palmitanilide (88.9%) was achieved after 24 h of reaction at 40 °C at an enzyme concentration of 1.4% (70 mg). Kinetics of lipase-catalyzed amidation of aniline with tripalmitin has been investigated. The reaction rate could be described in terms of the Michaelis–Menten equation with a Ping–Pong Bi–Bi mechanism and competitive inhibition by both the substrates. The kinetic constants were estimated by using non-linear regression method using enzyme kinetic modules. The enzyme operational stability study showed that Lipozyme IM20 retained 38.1% of the initial activity for the synthesis of palmitanilide (even after repeated use for 48 h). Palmitanilide, a fatty acid amide, exhibited potent antimicrobial activity toward Bacillus cereus.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

Immobilization of urease on vapour phase stain etched porous silicon

Porous silicon layers fabricated by the reaction-induced vapor phase stain etch method were coated with 5% polyethylenimine. Urease from Canavalia brasiliensis beans was immobilized on this support through covalent linking with 2.5% glutaraldehyde. The pH and temperature profile of the immobilized and free urease exhibited higher activity at pH 6.5 and 37 °C. After being stored for 30 days at 4 °C, the immobilized enzyme had 75% of the initial activity. The maximum apparent Michaelis constant for free urease (K_m) was 94.33 mM whereas for immobilized urease was 53.04 mM. The maximum reaction velocity (V_max) for free urease was 3.51 mmol/min and for immobilized urease was 1.57 mmol/min.     

Synthesis of structured lipid with balanced omega-3: Omega-6 ratio by lipase-catalyzed acidolysis reaction: Optimization of reaction using response surface methodology

The present study deals with the production of structured lipid containing omega-3 and omega-6 fatty acids in the ratio of 1:1 by incorporating omega-3 fatty acids (α-linolenic acid) from linseed oil into groundnut oil using lipase (Lipozyme IM from Rhizomucor miehei) catalyzed acidolysis reaction in hexane. The reaction conditions were optimized by response surface methodology with a four-variable five-level central composite rotatable experimental design. The influence of four independent parameters, namely ratio of fatty acid concentrate from linseed to groundnut oil (0.66–1.98, w/w), reaction temperature (30–60 °C), enzyme concentration (1–5%) and reaction time (2–54 h) on omega-3 fatty acids incorporation into groundnut oil were optimized. Optimal conditions for the structured lipid containing omega-3 to omega-6 fatty acids in the ratio of 1:1 were determined to be; enzyme concentration 3.75% (w/w), temperature 37.5 °C, incubation time 30.81 h and ratio of free fatty acid concentrate from linseed oil to groundnut oil 1.16 (w/w).     

Optimization of short-term storage of pikeperch semen: an applicable approach

Contamination of semen with urine and asynchronous maturation of males and females are main obstacles in artificial reproduction of pikeperch Sander lucioperca. The objective of this study was to overcome these obstacles using optimization of a procedure for short-term storage of pikeperch semen at 4 °C using two immobilizing media (IM): (a) IM1, 180 mM NaCl, 2.68 mM KCl, 1.36 mM CaCl₂ ⋅ 2H₂O and 2.38 mM NaHCO₃, 343 mOsm/kg; and (b) IM2, 200 mM NaCl, 2.68 mM KCl, 1.36 mM CaCl₂ ⋅ 2H₂O and 2.38 mM NaHCO₃, 381 mOsm/kg. Undiluted sperm was used as the control. At 6 h poststorage, there were no substantial changes in spermatozoa motility and velocity at 30 s postactivation in all groups. Over 48 h of storage, the highest spermatozoa motility and velocity were obtained in sperm diluted in IM2 compared to the other groups. IM2 could maintain a significantly higher ATP content of diluted sperm than IM1 and undiluted treatment for 2 days. Similarly, the highest values of eyeing and hatching rates were observed in sperm diluted in IM2 compared to sperm in the other studied groups. It can be concluded that the obtained result is a novel and applicable approach to maintain semen quality of pikeperch during short-term storage, suggesting IM2 as a promising medium for short-term storage. The present study also opens possibilities for ensuring a reliable source of semen as a convenient approach for increasing genetic diversity in hatcheries.     

Performance evaluation of various bioreactors for the removal of Cr(VI) and organic matter from industrial effluent

Performances of various bioreactors under different operating conditions were evaluated with respect to hexavalent chromium (Cr(VI)) reduction and COD removal. Continuous reactor studies were carried out with (i) aerobic suspended growth system, (ii) aerobic attached growth system, and (iii) anoxic attached growth system, using both synthetic and actual industrial wastewater. Arthrobacter rhombi-RE (MTCC7048), a Cr(VI) reducing strain enriched and isolated from chromium contaminated soil, was used in all the bioreactors for Cr(VI) biotransformation and COD removal. Aerobic and anoxic batch experiments were conducted to evaluate the bio-kinetic parameters. The bio-kinetic parameters for aerobic system were: μ_max = 2.34/d, K_s = 190 mg/L (as COD), K_i = 3.8 mg/L of Cr(VI), and Y_T = 0.377. These parameters for anoxic conditions were: μ_max = 0.57/d, K_s = 710 mg/L (as COD), K_i = 8.77 mg/L of Cr(VI), and Y_T = 0.13. Aerobic attached growth system, operated at a hydraulic retention time (HRT) of 24 h and an organic loading rate (OLR) of 3 kg/m³/d, performed better than aerobic suspended and the anoxic attached growth systems operated under identical conditions, while treating synthetic wastewater as well as industrial effluent.     

Binding of diarrheic shellfish poisoning toxins to okadaic acid binding proteins purified from the sponge Halichondria okadai

Okadaic acid (OA) and dinophysistoxin-1 (DTX1) cause diarrheic shellfish poisoning. This article examines the biochemical interactions of the two toxins with novel okadaic acid binding proteins (OABPs) 2.1 and 2.3, originally isolated from the marine sponge Halichondria okadai. First, recombinant OABPs 2.1 and 2.3 were expressed in Escherichia coli BL21 (DE3) cells. Binding assays using [24-³H]OA and the recombinant OABP 2.1 or 2.3 demonstrated the dissociation constant K_d of 1.30 ± 0.56 nM and 1.54 ± 0.35 nM, respectively. Binding of [24-³H]okadaic acid to recombinant OABP2.1 was almost equally replaced with OA and DTX1. OA-induced cytotoxicity in mouse leukemia P388 cells was inhibited in the presence of the recombinant OABPs 2.1 and 2.3 with an EC₅₀ of 92 ± 8.4 nM and 87 ± 13 nM, respectively. These results suggest that the blockage of OA-induced cytotoxicity by OABPs 2.1 and 2.3 may be involved in regulating symbiotic relationships present in the sponge H. okadai.     

Aerobic oxidation of indolomorphinan without the 4,5-epoxy bridge and subsequent rearrangement of the oxidation product to spiroindolinonyl-C-normorphinan derivative

Aerobic oxidation of indolomorphinan 1 without a 4,5-epoxy bridge proceeded in the presence of platinum catalyst to give indoleninomorphinan 2 or quinolono-C-normorphinan 5. The 4-hydroxy group would play an important role in deciding the course of the reaction. Treatment of 2a with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) gave spiroindolinonyl-C-normorphinan 3a whose structure resembles that of δ opioid receptor agonist spiroindanyloxymorphone (SIOM). Boron trichloride was effective for the reverse reaction from 3a to 2a without side reaction. This practical interconversion method between hydroxyindolenine and spiroindolinone would be useful for the design and construction of drug-like compound libraries. Although the compound 3b was expected to show the selectivity for δ opioid receptor because of the structural resemblance to SIOM, it was rather selective for μ opioid receptor (μ: K_i = 0.75 nM; δ: K_i = 2.90 nM; κ: K_i = 13.4 nM). The result suggests that the slight difference of the spatial location of the benzene rings in these compounds may definitively affect the binding affinity for δ opioid receptor.     

Production of medium chain glycerides from coconut and palm kernel fatty acid distillates by lipase-catalyzed reactions

Medium chain glycerides (MCGs) containing C_8:0 and C_10:0 fatty acids is very much important for medicinal and nutritional applications. Coconut and palm kernel fatty acid distillates (FADs) can be utilized to produce MCGs by a combination of lipase-catalyzed hydrolysis and esterification reactions. The neutral glycerides present in coconut and palm kernel FADs are hydrolyzed by Candida rugosa lipase. The hydrolysates were then subjected to steam distillation under vacuum (at 120–140 °C) to get fractions rich in medium chain fatty acids (MCFAs). The fractions, from coconut and palm kernel FADs (75.2 and 76.2% MCFAs, respectively), were esterified with Rhizomucor miehei (Lipozyme RM IM) lipase to produce MCGs. Products from coconut FAD contained 64.7–67.5% diacylglycerol (DG), followed by 18.8–22.9% monoacylglycerol (MG) and 9.8–9.3% triacylglycerol (TG). Similarly, products from palm kernel FAD contained 63.5–66.7% DG, 19.1–23.6% MG and 9.5–10.1% TG.     

The binding of okadaic acid analogs to recombinant OABP2.1 originally isolated from the marine sponge Halichondria okadai

The binding between [24-³H]okadaic acid (OA) and a recombinant OA binding protein OABP2.1 was examined using various OA analog, including methyl okadaate, norokadanone, 7-deoxy OA, and 14,15-dihydro OA, 7-O-palmitoyl DTX1, to investigate the structure activity relationship. Among them, 7-O-palmitoyl DTX1, which is one of the diarrhetic shellfish poisoning (DSP) toxins identified in shellfish, displayed an IC₅₀ for [24-³H]OA binding at 51 ± 6.3 nM (Mean ± SD). In addition, a synthetic compound, N-pyrenylmethyl okadamide, exhibited its IC₅₀ at 10 ± 2.9 nM (Mean ± SD). These results suggested that the recombinant OABP2.1 and the N-pyrenylmethyl okadamide might be core substances in a novel assay for the DSP toxins.     

Effect of supplemental palm oil on nutrient utilization,feeding economics and carcass characteristics in post-weaned Muzafarnagari lambs under feedlot condition

Thirty male post-weaned Muzafarnagari lambs, of about 3 months of age and similar body weight (18.47 ± 1.31 kg), were divided into 5 similar groups in order to observe the effect of graded levels of palm oil supplementation on growth, nutrient utilization, cost of feeding, carcass characteristics and meat quality under feedlot regimen. Lambs in different treatment groups were fed with concentrate mash supplemented with 0% (T₁), 2.5% (T₂), 5.0% (T₃), 7.5% (T₄) and 10% (T₅) palm oil and gram straw (Cicer arietinum) ad libitum. The growth trial was continued for 12 weeks. A metabolism trial of 6 days collection was conducted after 60 days of experimental feeding. After 90 days of feeding, randomly selected three animals from each group were slaughtered according to standard procedure for assessment of carcass traits and meat quality. Separated thoracic portion of Longissimus thoracis muscle from each carcass was collected for analysis of moisture, protein and fat. Accelerated growth in lambs under T₃ (P < 0.05) was observed as compared to other treatments with similar DM intake. Similarly, DM intake (kg)/kg gain was found most efficient (P < 0.01) in T₃ and least efficient in 10% palm oil supplemented T₅. Due to this, feed cost (rupees)/kg weight gain was calculated less (44.23) in T₃ than other palm oil supplemented treatments. DM, CP, Ca and P intakes were similar in all treatment groups during metabolism trial. Intake ratio of Ca and P was recorded 3.68:1.00, 3.42:1.00, 3.37:1.00, 3.69:1.00 and 3.44:1.00 in T₁ to T₅ treatments, respectively. Water intake and water intake/kg DM intake was also similar in different treatment groups. OM digestibility was significantly higher (P < 0.01) in 2.5% palm oil supplemented T₂ ration as compared to other treatments. DM, CP, EE, CF, NFE and P digestibilities were found similar among different treatment groups. TDN percentage in the feed increased from 60.16 (T₁) to 66.17 (T₅), which was mainly due gradual increase of palm oil in the diet, although the difference was non-significant. Whereas, DCP percentage in feed gradually depressed (P < 0.05) due to higher level of palm oil supplementation. Nitrogen retention (%) as percentage of N-absorbed was significantly higher (P < 0.05) in palm oil supplemented groups than control T₁, being highest in T₃ and T₄. This could be the reason for higher body weight gain in T₃ and T_4. Dressing and meat percentages (empty weight basis) ranged from 52.00 (T₄) to 55.06 (T₂) and 58.10 (T₂) to 62.27 (T₅), respectively, however, the differences were similar. Muscle fat% (DM basis) increased (P < 0.01) from 19.84 (T₁) to 28.94 (T₅) due to palm oil addition. Meat protein% (DM basis) remained unaffected due to these treatments, which ranged from 59.95 (T₁) to 70.47 (T₂). Result indicates that addition of 5% palm oil in concentrate mixture improved growth performance and feed conversion efficiency of weaned Muzafarnagari lambs keeping the quality of meat unaffected.     

Improvements of enzyme activity and enantioselectivity in lipase-catalyzed alcoholysis of (R,S)-azolides

With Candida antarctica lipase B (CALB)-catalyzed alcoholysis of (R,S)-naproxenyl 1,2,4-triazolide at the optimal conditions (i.e. anhydrous MTBE as the solvent, and methanol as the acyl acceptor at 45 °C) as the model system, the enzyme enantioselectivity in terms of V_R/V_S = 105.8 and specific activity for the fast-reacting (R)-azolide V_R/(E_t) = 0.979 mmol/(h g) were greatly improved in comparison with V_R/V_S = 8.0 and V_R/(E_t) = 0.113 mmol/(h g) of using (R,S)-naproxenyl 2,2,2-trifluoroethyl ester as the substrate. The resolution strategy was successfully extended to other (R,S)-profenyl 1,2,4-triazolides and lipases from Candida rugosa (Lipase MY) and Carica papaya (CPL) having opposite enantioselectivity to CALB. Moreover, the kinetic constants were estimated, compared with those obtained via hydrolysis, and employed for modeling time-course conversions of (R,S)-naproxenyl 1,2,4-triazolide in anhydrous MTBE. The advantages of easy substrate preparation, high enzyme reactivity and enantioselectivity, as well as easy product separation from the remaining substrate via reactive extraction demonstrate merits of using (R,S)-azolides but not the corresponding esters for the alcoholytic resolution.     

Phenoloxidase activity and thermostability of Cancer pagurus and Limulus polyphemus hemocyanin

The intrinsic and inducible o-diphenoloxidase (o-diPO) activity of Cancer pagurus hemocyanin (CpH) and Limulus polyphemus hemocyanin (LpH) were studied using catechol, l-Dopa and dopamine as substrates. The kinetic analysis shows that dopamine is a more specific substrate for CpH than catechol and l-Dopa (K_m value of 0.01 mM for dopamine versus 0.67 mM for catechol, and 2.14 mM for l-Dopa), while k_cat is highest for catechol (2.44 min^? 1 versus 0.67 min^? 1 for l-Dopa and 0.71 min^? 1 for dopamine). On treatment with 4 mM sodium dodecyl sulfate (SDS) or by proteolysis the o-diPO activity of CpH increases about twofold. In contrast, native LpH shows no o-diPO activity, and exhibits only a slight activity after incubation with SDS. Neither CpH nor LpH show intrinsic mono-PO activity with l-tyrosine and tyramine as substrates. To explore the possible correlation between the degree of PO activity and protein stability of arthropod hemocyanins, the thermal stability of CpH and LpH was investigated by differential scanning calorimetry and Fourier transform infrared spectroscopy. CpH is found to be less thermostable (T_m ~ 80 °C), suggesting that the dicopper active sites are more accessible, thereby allowing the hemocyanin to show PO activity in the native state. The LpH, on the other hand, is more thermostable (T_m ~ 92 °C), suggesting the existence of a correlation between the thermal stability and the intrinsic PO activity of arthropod hemocyanins.     

Comparative molecular field analysis of fenoterol derivatives: A platform towards highly selective and effective β2-adrenergic receptor agonists

Purpose: To use a previously developed CoMFA model to design a series of new structures of high selectivity and efficacy towards the β₂-adrenergic receptor. Results: Out of 21 computationally designed structures 6 compounds were synthesized and characterized for β₂-AR binding affinities, subtype selectivities and functional activities. Conclusion: the best compound is (R,R)-4-methoxy-1-naphthylfelnoterol with K_iβ₂-AR = 0.28 μm, K_iβ₁-AR/K_iβ₂-AR = 573, EC_50cAMP = 3.9 nm, EC_50cardio = 16 nm. The CoMFA model appears to be an effective predictor of the cardiomocyte contractility of the studied compounds which are targeted for use in congestive heart failure.     

Potential use of whole cell lipase from a newly isolated Aspergillus nomius for methanolysis of palm oil to biodiesel

A highly active whole cell lipase (WCL) for efficient methanolysis of palm oil (PO) to biodiesel (BD) was prepared by isolation, cultivation and immobilization of lipase producing fungi. Fungi were screened from soil and the best isolate (PDA-6) identified as Aspergillus nomius exhibited maximum WCL methanolysis activity (1.4 g h⁻¹ g⁻¹) when inexpensive waste cooking oil was used as carbon source. The maximum BD yield with PDA-6 WCL reached 95.3% after 40 h at a lipase load 10% (w/w) of PO and methanol to PO molar ratio 5:1. The immobilization of PDA-6 cells within biomass suspended particle (BSP) made of polyurethane foam improved the repeated use of WCL and the remaining activity after 10 cycles was 88.2%. The PDA-6 WCL was more active in methanolysis of PO to BD than most WCLs previously reported. The newly isolated A. nomius is not only potential for producing WCL but also utilizing waste cooking oil.     

Oleanolic acid (OA) as an antileishmanial agent: Biological evaluation and in silico mechanistic insights

Although a worldwide health problem, leishmaniasis is considered a highly neglected disease, lacking efficient and low toxic treatment. The efforts for new drug development are based on alternatives such as new uses for well-known drugs, in silico and synthetic studies and naturally derived compounds. Oleanolic acid (OA) is a pentacyclic triterpenoid widely distributed throughout the Plantae kingdom that displays several pharmacological activities. OA showed potent leishmancidal effects in different Leishmania species, both against promastigotes (IC_{50 L. braziliensis} 30.47 ± 6.35 μM; IC_{50 L. amazonensis} 40.46 ± 14.21 μM; IC_{50 L. infantum} 65.93 ± 15.12 μM) and amastigotes (IC_{50 L. braziliensis} 68.75 ± 16.55 μM; IC_{50 L. amazonensis} 38.45 ± 12.05 μM; IC_{50 L. infantum} 64.08 ± 23.52 μM), with low cytotoxicity against mouse peritoneal macrophages (CC₅₀ 235.80 ± 36.95 μM). Moreover, in silico studies performed to evaluate OA molecular properties and to elucidate the possible mechanism of action over the Leishmania enzyme sterol 14α-demethylase (CYP51) suggested that OA interacts efficiently with CYP51 and could inhibit the ergosterol synthesis pathway. Collectively, these data indicate that OA is a good candidate as leading compound for the development of a new leishmaniasis treatment.