共查询到20条相似文献,搜索用时 15 毫秒
1.
It is of interest to compare the accuracy of three different impression techniques for a single tooth impression. We used 3 groups with 15 samples each in this study. Group 1: Putty and light body in a sectional stock tray; Group 2: Monophase and extra light body in a sectional stock tray; Group 3: Matrix impression technique. 15 impressions were taken of a prepared tooth on a typodont with each technique. The dimensions of the casts poured from these impression techniques were compared with the control typodont tooth. Data analysis shows that the matrix impression technique gave the best results in terms of dimensional study followed by monophase and extra light body impression technique and putty and light body impression technique gave the least accurate results. The results show that there is a statistically significant difference between the three impression techniques in terms of dimensional stability. Data analysis shows that the matrix impression technique gave the best results in terms of dimensional study followed by monophase and extra light body impression technique and putty and light body impression technique gave the least accurate results. The variations between the groups are within acceptable limits. Hence, it can be concluded that all the impression techniques will result in adequate dimensional stability and can be used in clinical scenarios. 相似文献
2.
This study describes the development of a system for quantification of human biting forces by (1) determining the mechanical properties of an epoxy resin reinforced with carbon fiber, (2) establishing the transducer's optimal dimensions to accommodate teeth of various widths while minimizing transducer thickness, and (3) determining the optimal location of strain gages using a series of mechanical resistance and finite element (FE) analyses. The optimal strain gage location was defined as the position that produced the least difference in strain pattern when the load was applied by teeth with two different surface areas. The result is a 7.3-mm-thick transducer with a maximum load capacity beyond any expected maximum bite force (1500 N). This system includes a graphic interface that easily allows acquisition and registration of bite force by any health-sciences or engineering professional. 相似文献
3.
The aim of this study was to obtain insight into the coactivation behaviour of the jaw muscles under various a priori defined static loading conditions of the mandible. As the masticatory system is mechanically redundant, an infinite number of recruitment patterns is theoretically possible to produce a certain bite force. Using a three-component force transducer and a feedback method, subjects could be instructed to produce a bite force of specific direction and magnitude under simultaneous registration of the EMG activity of anterior and posterior temporal, masseter and digastric muscles on each side. Forces were measured at the second premolars. Vertical, anterior, posterior, lateral and medial force directions were examined; in each direction force levels between 50 N and maximal voluntary force were produced. The results show that for all muscles the bite force-EMG relationship obeys a straight-line fit for forces exceeding 50 N. The relationship varies with bite force direction, except in the case of the digastric muscles. Variation is small for the anterior temporal and large for the posterior temporal and masseter muscles. The relative activation of muscles for a particular force in a particular direction in unique, despite the redundancy. 相似文献
4.
Maximum bite force affects craniofacial morphology and an organism's ability to break down foods with different material properties. Humans are generally believed to produce low bite forces and spend less time chewing compared with other apes because advances in mechanical and thermal food processing techniques alter food material properties in such a way as to reduce overall masticatory effort. However, when hominins began regularly consuming mechanically processed or cooked diets is not known. Here, we apply a model for estimating maximum bite forces and stresses at the second molar in modern human, nonhuman primate, and hominin skulls that incorporates skeletal data along with species‐specific estimates of jaw muscle architecture. The model, which reliably estimates bite forces, shows a significant relationship between second molar bite force and second molar area across species but does not confirm our hypothesis of isometry. Specimens in the genus Homo fall below the regression line describing the relationship between bite force and molar area for nonhuman anthropoids and australopiths. These results suggest that Homo species generate maximum bite forces below those predicted based on scaling among australopiths and nonhuman primates. Because this decline occurred before evidence for cooking, we hypothesize that selection for lower bite force production was likely made possible by an increased reliance on nonthermal food processing. However, given substantial variability among in vivo bite force magnitudes measured in humans, environmental effects, especially variations in food mechanical properties, may also be a factor. The results also suggest that australopiths had ape‐like bite force capabilities. Am J Phys Anthropol 151:544–557, 2013. © 2013 Wiley Periodicals, Inc. 相似文献
5.
Visuomotor tracking tasks have been used to elucidate the underlying mechanisms that allow for the coordination of a movement to an environmental event. The main purpose of the present study was to examine the relationship between accuracy and stability of tracking performance and the amount of corrective movements that emerge for various coordination patterns in a unimanual visuomotor tracking task. Participants (N = 6) produced rhythmic elbow flexion-extension motions and were required to track an external sinusoidal signal at five different relative phases, 0°, 45°, 90°, 135°, and 180°. Differential accuracy and stability were found among the five tracking patterns with the 0° relative phase pattern being the most accurate and stable pattern. Corrective movements were correlated with changes in accuracy only for the 0° relative phase pattern, with more corrections emerging for less accurate performance. The amount of corrective movements decreased as the stability of tracking performance increased for the 0°, 45°, and 135° patterns. For the 90° and 180° tracking patterns, the amount of corrective movements was not correlated with pattern accuracy or pattern stability. The results demonstrate that corrective behaviors are an important motor process in maintaining the stability of stable perception-action coordination patterns, while offering little benefit for unstable perception-action patterns. 相似文献
6.
A key assumption in ecomorphological studies is that morphology–function relationships are invariant due to underlying biomechanical principles. We tested the hypothesis that morphology–performance relationships are invariant across different seasons by examining how a key performance trait, bite force, and two aspects of morphology (head shape and dewlap size) changed seasonally in the field and in the laboratory in the green anole lizard Anolis carolinensis . We found that not only did bite force change seasonally (up to 80% within the same individual), but relationships between morphology and bite force are highly plastic. Of the three traits examined (bite force, head shape, and dewlap area), only head shape did not change seasonally. We noted opposing trends for how bite force and dewlap area changed seasonally; whereas dewlap areas were large in the spring, and small in the winter, bite forces were low in the spring and high in the winter. This pattern occurred because of a tradeoff at the individual level: individuals in the spring with large dewlaps and high bite forces diminish their dewlaps (but not bite force), whereas individuals with small dewlaps and low bite forces in the spring increase their bite forces (but not dewlap size). We also show that this trend was apparent both in the field (comparing different individuals) and the laboratory (comparing the same set of individuals under standardized conditions). Finally, seasonal changes were not consistent among individuals for either bite force or dewlap area, as individuals changed seasonally in proportion to their initial state. These findings cast doubt on the widely held view of invariant morphology–performance relationships, and offer a cautionary note for eco-morphological studies. 相似文献
7.
Single element foil strain gages were bonded to mandibular cortical bone in eight specimens of Galago crassicaudatus. The gage was bonded below the Pm4 or M2 adjacent to the lower border of the mandible. The bonded strain gage was connected to form one arm of a Wheatstone bridge. Following recovery from the general anesthetic, the restrained Galago bit either a piece of wood, a food object, or a bite force transducer. During these biting episodes, mandibular bone strain deformed the strain gage and the resulting change in electrical resistance of the gage caused voltage changes across the Wheatstone bridge. These changes, directly proportional to the amount of bone strain along the gage site, were recovered by a strip chart recorder. Bone strain was measured on both the working and balancing sides of the jaws. Maximum values of bone strain and bite force were 435 microstrain (compression) and 8.2 kilograms respectively. During bending of the mandible, the correlation between bone strain (tension or compression) and bite force ranged from -0.893 (tension) to 0.997 (compression). The experiments reported here demonstrate that only a small percentage of the Galago bite force is due to balancing side muscle force during isometric unilateral molar biting. In addition, these experiments demonstrate that the Galago mandible is bent in a predictable manner during biting. The amount of apparent mandibular bone strain is dependent on (1) the magnitude of the bite force and (2) the position of the bite point. 相似文献
8.
For many vertebrate species, bite force plays an important functional role. Ecological characteristics of a species' niche, such as diet, are often associated with bite force. Previous evidence suggests a biomechanical trade‐off between rodents specialized for gnawing, which feed mainly on seeds, and those specialized for chewing, which feed mainly on green vegetation. We tested the hypothesis that gnawers are stronger biters than chewers. We estimated bite force and measured skull and mandible shape and size in 63 genera of a major rodent radiation (the myomorph sigmodontines). Analysis of the influence of diet on bite force and morphology was made in a comparative framework. We then used phylogenetic path analysis to uncover the most probable causal relationships linking diet and bite force. Both granivores (gnawers) and herbivores (chewers) have a similar high bite force, leading us to reject the initial hypothesis. Path analysis reveals that bite force is more likely influenced by diet than the reverse causality. The absence of a trade‐off between herbivores and granivores may be associated with the generalist nature of the myomorph condition seen in sigmodontine rodents. Both gnawing and chewing sigmodontines exhibit similar, intermediate phenotypes, at least compared to extreme gnawers (squirrels) and chewers (chinchillas). Only insectivorous rodents appear to be moving towards a different direction in the shape space, through some notable changes in morphology. In terms of diet, natural selection alters bite force through changes in size and shape, indicating that organisms adjust their bite force in tandem with changes in food items. 相似文献
9.
Four different proteases (trypsin, chymotrypsin, papain and pepsin) were covalently attached to the surface of a new type of porous zirconia, as well as a conventional porous silica, activated with 3-isothiocyanatopropyltriethoxy silane (NCS-silane). The immobilization efficiency onto the porous zirconia material was evaluated in terms of the amount of enzyme attached to the particles and from the biological activity remaining after the immobilization step. The results were compared with the corresponding experiments with a porous silica of similar surface area/g support material. In addition, the storage stability of the modified zirconia and silica biocatalysts were evaluated. These results indicated that specific immobilized enzyme biocatalysts can be achieved with this new zirconia support material which exhibits different properties to those observed with the more conventional silica-based materials. Moreover, the results with the enzyme-zirconia biocatalysts also indicate different characteristics when compared with data for the same enzymes immobilized under similar buffer conditions to organic support materials as previously described by various other investigators. The advantages of zirconia-based immobilized enzyme biocatalysts in terms of their density and chemical robustness are also described relative to other alternative support materials currently in use. 相似文献
10.
In biomechanical investigations, geometrically accurate computer models of anatomical structures can be created readily using computed-tomography scan images. However, representation of soft tissue structures is more challenging, relying on approximations to predict the muscle loading conditions that are essential in detailed functional analyses. Here, using a sophisticated multi-body computer model of a reptile skull (the rhynchocephalian Sphenodon), we assess the accuracy of muscle force predictions by comparing predicted bite forces against in vivo data. The model predicts a bite force almost three times lower than that measured experimentally. Peak muscle force estimates are highly sensitive to fibre length, muscle stress, and pennation where the angle is large, and variation in these parameters can generate substantial differences in predicted bite forces. A review of theoretical bite predictions amongst lizards reveals that bite forces are consistently underestimated, possibly because of high levels of muscle pennation in these animals. To generate realistic bites during theoretical analyses in Sphenodon, lizards, and related groups we suggest that standard muscle force calculations should be multiplied by a factor of up to three. We show that bite forces increase and joint forces decrease as the bite point shifts posteriorly within the jaw, with the most posterior bite location generating a bite force almost double that of the most anterior bite. Unilateral and bilateral bites produced similar total bite forces; however, the pressure exerted by the teeth is double during unilateral biting as the tooth contact area is reduced by half. 相似文献
11.
Bone is a highly plastic tissue that reflects the many potential sources of variation in shape. Here, we focus on the functional aspects of bone remodeling. We choose the skull for our analyses because it is a highly integrated system that plays a fundamental role in feeding and is thus, likely under strong natural selection. Its principal mechanical components are the bones and muscles that jointly produce bite force and jaw motion. Understanding the covariations among these three components is of interest to understand the processes driving the evolution of the feeding apparatus. In this study, we quantitatively and qualitatively compare interactions between these three components in shrews from populations known to differ in shape and bite force. Bite force was measured in the field using a force transducer and skull shape was quantified using surface geometric morphometric approaches based on µCT‐scans of the skulls of same individuals. The masseter, temporalis, pterygoideus, and digastricus muscles of these individuals were dissected and their cross sectional areas determined. Our results show strong correlations between bite force and muscle cross sectional areas as well as between bite force and skull shape. Moreover, bite force explains an important amount of skull shape variation. We conclude that interactions between bone shape and muscle characteristics can produce different morpho‐functional patterns that may differ between populations and may provide a suitable target for selection to act upon. J. Morphol. 276:301–309, 2015. © 2014 Wiley Periodicals, Inc. 相似文献
12.
Developmental instability, as measured by fluctuating asymmetry is generally considered to increase with genetic and environmental stresses. Few studies have, however, addressed the role of asymmetry in altering organism performance. Here, we measured bite force performance in three strains of inbred and outbred mice derived from wild ancestors. We quantified size and shape directional, and fluctuating asymmetry, as well as inter-individual variation of their mandibles using geometric morphometrics. We also developed a way to estimate shape antisymmetry, to filter it out of the fluctuating asymmetry component. Contrary to our expectations, we found no significant link between bite force and asymmetry levels. Inbreeding did not produce any clear and significant increase or decrease in neither inter-individual variance, nor fluctuating asymmetry. Furthermore, fluctuating asymmetry levels were unrelated to inter-individual variance levels, although these two types of variation affected the same areas of the mandible. We did not highlight any impact of inbreeding depression on bite force. Fluctuating asymmetry was reduced in the mandible, which we argue may be linked to its functional relevance. We found some significant but very reduced antisymmetry possibly linked to lateralization. This lateralization did not relate to any bite force difference. Our results show that neither inbreeding, nor asymmetry (combining fluctuating, directional asymmetry and antisymmetry) significantly affect bite force performance in mice, and that despite affecting the same morphological regions, developmental stability and canalization are independent. 相似文献
13.
咬合力作为衡量动物生存能力的重要指标,可以在一定程度上反映动物捕食、反捕食和争夺配偶的能力。对于蜥蜴类动物而言,头部形态和咬合力大小之间常呈现显著线性关系。通过测量2018年7月采集于新疆霍城县图开沙漠的24号草原蜥(Trapelussanguinolenta)(雌13,雄11)的头部形态指标,并使用薄膜压力测试仪测定咬合力,采用单因素方差分析(ANOVA)、主成分分析、模型拟合及逐步回归4种方法探究草原蜥咬合力的两性差异及其与头部形态指标的关系。结果表明,草原蜥头体长、头长、头宽、头高、口宽和下颌长在两性个体间均无显著差异,草原蜥两性个体之间咬合力也没有显著差异。主成分分析及赤池信息模型拟合结果均显示,头长、头宽和下颌长是影响草原蜥咬合力的重要因素,逐步回归分析揭示草原蜥的咬合力主要受头宽影响。上述研究结果表明,草原蜥的咬合力受头部形态大小的影响,但两性个体之间咬合力却不存在显著差异,这与头部形态特征未表现出两性差异一致,这可能是草原蜥对灌丛生活的适应,具体而言,是头部大小与运动权衡的结果。 相似文献
14.
Functional heterogeneity is a skeletal muscle’s ability to generate diverse force vectors through localised motor unit (MU) recruitment. Existing 3D macroscopic continuum-mechanical finite element (FE) muscle models neglect MU anatomy and recruit muscle volume simultaneously, making them unsuitable for studying functional heterogeneity. Here, we develop a method to incorporate MU anatomy and information in 3D models. Virtual fibres in the muscle are grouped into MUs via a novel “virtual innervation” technique, which can control the units’ size, shape, position, and overlap. The discrete MU anatomy is then mapped to the FE mesh via statistical averaging, resulting in a volumetric MU distribution. Mesh dependency is investigated using a 2D idealised model and revealed that the amount of MU overlap is inversely proportional to mesh dependency. Simultaneous recruitment of a MU’s volume implies that action potentials (AP) propagate instantaneously. A 3D idealised model is used to verify this assumption, revealing that neglecting AP propagation results in a slightly less-steady force, advanced in time by approximately 20 ms, at the tendons. Lastly, the method is applied to a 3D, anatomically realistic model of the masticatory system to demonstrate the functional heterogeneity of masseter muscles in producing bite force. We found that the MU anatomy significantly affected bite force direction compared to bite force magnitude. MU position was much more efficacious in bringing about bite force changes than MU overlap. These results highlight the relevance of MU anatomy to muscle function and joint force, particularly for muscles with complex neuromuscular architecture. 相似文献
15.
Adhesion and cytoskeletal structure are intimately related in biological cell function. Even with the vast amount of biological and biochemical data that exist, little is known at the molecular level about physical mechanisms involved in attachments between cells or about consequences of adhesion on the material structure. To expose physical actions at soft biological interfaces, we have combined an ultrasensitive transducer and reflection interference microscopy to image submicroscopic displacements of probe contact with a test surface under minuscule forces. The transducer is a cell-size membrane capsule pressurized by micropipette suction where displacement normal to the membrane under tension is proportional to the applied force. Pressure control of the tension tunes the sensitivity in operation over four orders of magnitude through a range of force from 0.01 pN up to the strength of covalent bonds (approximately 1000 pN)! As the surface probe, a microscopic bead is biochemically glued to the transducer with a densely-bound ligand that is indifferent to the test surface. Movements of the probe under applied force are resolved down to an accuracy of approximately 5 nm from the interference fringe pattern created by light reflected from the bead. With this arrangement, we show that local mechanical compliance of a cell surface can be measured at a displacement resolution set by structural fluctuations. When desired, a second ligand is bound sparsely to the probe for focal adhesion to specific receptors in the test surface. We demonstrate that monitoring fluctuations in probe position at low transducer stiffness enhances detection of molecular adhesion and activation of cytoskeletal structure.(ABSTRACT TRUNCATED AT 250 WORDS) 相似文献
16.
The Common Chuckwalla [ Sauromalus ater (= obesus )] is a large, sexually dimorphic lizard with a flattened head that takes refuge from predators in rock crevices. Males use their relatively large heads to bite competing males during territorial fights and to restrain females during copulation. Flattened heads with an antipredator function (i.e. seeking refuge in crevices) and enlarged heads with intrasexual competition and reproductive functions suggest possible antagonism between selective pressures on head morphology in males. To examine this hypothesis, we performed a morphometric analysis and measured the bite-force performance of 49 adult chuckwallas. Males had disproportionately wider heads than females, but did not have deeper heads. Males bit with nearly four times the force of females, consistent with the notion of sexual selection for high bite force in males. Although constrained by crevice-wedging behaviour, head depth was a good predictor of bite force in both sexes. In males, however, osteological head width also was a good predictor of bite force. These results are consistent with the hypothesis that head shape in males is under antagonistic selective pressures, which may partly explain the pattern of head shape dimorphism. The disproportionately wide head of males may reflect anatomical modifications to enhance bite force in response to sexual selection in spite of presumed constraints on head shape for crevice-wedging behaviour © 2006 The Linnean Society of London, Biological Journal of the Linnean Society , 2006, 88 , 215–222. 相似文献
17.
Different studies have indicated, in open bite patients, that masticatory muscles tend to generate a small maximum bite force and to show a reduced cross-sectional area with a lower EMG activity. The aim of this study was to evaluate the kinematics parameters of the chewing cycles and the activation of masseters and anterior temporalis muscles of patients with anterior dental open bite malocclusion. There have been no previous reports evaluating both kinematic values and EMG activity of patients with anterior open bite during chewing. Fifty-two young patients (23 boys and 29 girls; mean age±SD 11.5±1.2 and 10.2±1.6years, respectively) with anterior open bite malocclusion and 21 subjects with normal occlusion were selected for the study. Kinematics parameters and surface electromyography (EMG) were simultaneously recorded during chewing a hard bolus with a kinesiograph K7-I Myotronics-Usa. The results showed a statistically significant difference between the open bite patients and the control group for a narrower chewing pattern, a shorter total and closing duration of the chewing pattern, a lower peak of both the anterior temporalis and the masseter of the bolus side. In this study, it has been observed that open bite patients, lacking the inputs from the anterior guidance, that are considered important information for establishing the motor scheme of the chewing pattern, show narrower chewing pattern, shorter lasting chewing cycles and lower muscular activation with respect to the control group. 相似文献
18.
Ecological factors can be important to shape the patterns of morphological variation among human populations. Particularly, diet plays a fundamental role in craniofacial variation due to both the effect of the nutritional status—mostly dependent on the type and amount of nutrients consumed—on skeletal growth and the localized effects of masticatory forces. We examine these two dimensions of diet and evaluate their influence on morphological diversification of human populations from southern South America during the late Holocene. Cranial morphology was measured as 3D coordinates defining the face, base and vault. Size, form, and shape variables were obtained for 474 adult individuals coming from 12 samples. Diet composition was inferred from carious lesions and δ 13C data, whereas bite forces were estimated using traits of main jaw muscles. The spatial structure of the morphological and ecological variables was measured using correlograms. The influence of diet composition and bite force on morphometric variation was estimated by a spatial regression model. Cranial variation and diet composition display a geographical structure, while no geographical pattern was observed in bite forces. Cranial variation in size and form is significantly associated with diet composition, suggesting a strong effect of systemic factors on cranial growth. Conversely, bite forces do not contribute significantly to the pattern of morphological variation among the samples analyzed. Overall, these results show that an association between diet composition and hardness cannot be assumed, and highlight the complex relationship between morphological diversification and diet in human populations. Am J Phys Anthropol 155:114–127, 2014. © 2014 Wiley Periodicals, Inc. 相似文献
19.
A 20-month-old child was accidentally poisoned after biting through the bottom of a medicine container and ingesting the tablets inside. Consequently a study was carried out to determine the force required to fracture 20 randomly selected 25 and 32 ml polystyrene containers to see whether this exceeded the bite force of a child''s jaw. Tests were performed at displacement rates of 0.5 and 10 cm/min. All the containers failed at well below the bite force recorded for children, which is 392 N. All containers must conform to a British Standards test that requires that they withstand a force of only 35 N. Clearly this is not enough to safeguard small children. The use of polystyrene containers should be scrutinised closely, as the case of accidental poisoning reported may not be unique. 相似文献
|