A simple and sensitive turn‐on fluorescence probe for detection of cetyltrimethylammonium bromide in aqueous samples

The interaction of acid (PTCA) with cetyltrimethylammonium bromide (CTAB) has been studied by fluorescence spectroscopy. The fluorescence of PTCA can be greatly enhanced by the addition of CTAB, due to the formation a fluorescent supramolecular compound. Under optimum conditions, the enhancement intensity of fluorescence was proportional to the concentration of CTAB over a range of 0–4.5 µmol L^?1. Its detection limit was 0.057 µmol L^?1, which was lower than reported previously. Compared with other methods that have been reported to determine CTAB, this method has high sensitivity, stability and wide linear range and it can be used satisfactorily for the determination of CTAB in aqueous samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A simple and sensitive label‐free fluorescence sensing of heparin based on Cdte quantum dots

A rapid, simple and sensitive label‐free fluorescence method was developed for the determination of trace amounts of an important drug, heparin. This new method was based on water‐soluble glutathione‐capped CdTe quantum dots (CdTe QDs) as the luminescent probe. CdTe QDs were prepared according to the published protocol and the sizes of these nanoparticles were verified through transmission electron microscopy (TEM), X‐ray diffraction (XRD) and dynamic light scattering (DLS) with an average particle size of about 7 nm. The fluorescence intensity of glutathione‐capped CdTe QDs increased with increasing heparin concentration. These changes were followed as the analytical signal. Effective variables such as pH, QD concentration and incubation time were optimized. At the optimum conditions, with this optical method, heparin could be measured within the range 10.0–200.0 ng mL^?1 with a low limit of detection, 2.0 ng mL^?1. The constructed fluorescence sensor was also applied successfully for the determination of heparin in human serum. Copyright © 2015 John Wiley & Sons, Ltd.     

Stereoselective Synthesis of (3R)‐3‐Alkyl‐4,1‐Benzoxazepine‐2,5‐Diones

Novel 3‐alkyl‐4,1‐benzoxazepine‐2,5‐diones were synthesized in good ee exploiting the chiral pool methodology, an economical way of asymmetric synthesis. Various anthranilic acids are coupled with different α‐haloacids to afford N‐acylated anthranilic acid intermediates which undergo cyclization to (3R)‐3‐alkyl‐4,1‐benzoxazepines‐2,5‐diones. Chirality 25:865–870, 2013. © 2013 Wiley Periodicals, Inc.     

H2O2‐ and pH‐sensitive CdTe quantum dots as fluorescence probes for the detection of glucose

A novel fluorescence assay system for glucose was developed with thioglycollic acid (TGA)‐capped CdTe quantum dots (QDs) as probes. The luminescence quantum yield of the TGA‐capped CdTe QDs was highly sensitive to H₂O₂ and pH. In the presence of glucose oxidase, glucose is oxidized to yield, gluconic acid and H₂O₂. H₂O₂ and H⁺ (dissociated from gluconic acid) intensively quenched the fluorescence of QDs. The experimental results showed that the quenched fluorescence was proportional to the glucose concentration within the range of 0.01–5.0 mm under optimized experimental conditions. Compared with most of the existing methods, this newly developed system possesses many advantages, including simplicity, low cost, high flexibility, and good sensitivity. Furthermore, no complicated chemical modification of QDs and enzyme immobilization was needed in this system. Copyright © 2012 John Wiley & Sons, Ltd.     

Characterizing the release of bioactive N‐glycans from dairy products by a novel endo‐β‐N‐acetylglucosaminidase

Endo‐β‐N‐acetylglucosaminidase isolated from B. infantis ATCC 15697 (EndoBI‐1) is a novel enzyme that cleaves N‐N′‐diacetyl chitobiose moieties found in the N‐glycan core of high mannose, hybrid, and complex N‐glycans. These conjugated N‐glycans are recently shown as a new prebiotic source that stimulates the growth of a key infant gut microbe, Bifidobacterium longum subsp. Infantis. The effects of pH (4.45–8.45), temperature (27.5–77.5°C), reaction time (15–475 min), and enzyme/protein ratio (1:3,000–1:333) were evaluated on the release of N‐glycans from bovine colostrum whey by EndoBI‐1. A central composite design was used, including a two‐level factorial design (2⁴) with four center points and eight axial points. In general, low pH values, longer reaction times, higher enzyme/protein ratio, and temperatures around 52°C resulted in the highest yield. The results demonstrated that bovine colostrum whey, considered to be a by/waste product, can be used as a glycan source with a yield of 20 mg N‐glycan/g total protein under optimal conditions for the ranges investigated. Importantly, these processing conditions are suitable to be incorporated into routine dairy processing activities, opening the door for an entirely new class of products (released bioactive glycans and glycan‐free milk). The new enzyme's activity was also compared with a commercially available enzyme, showing that EndoBI‐1 is more active on native proteins than PNGase F and can be efficiently used during pasteurization, streamlining its integration into existing processing strategies. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:1331–1339, 2015     

A simple and sensitive spectrofluorimetric method for the determination of furosemide using zinc(II)–1,4‐bis(imidazol‐1‐ylmethyl)benzene complexes

A novel spectrofluorometric method for the determination of furosemide (FUR) is described. The method is based on enhancement of fluorescence emission of FUR in the presence of zinc (II) complexes of 1,4‐bis(imidazol‐1‐ylmethyl)benzene. Under optimum conditions, the enhanced fluorescence intensity is linearly related to the concentration of FUR. The proposed method has been successfully applied to the determination of FUR in pharmaceutical preparations. The possible mechanism of this reaction is discussed briefly based on data from fluorescence spectroscopy, UV–vis absorption and infrared spectroscopy. Copyright © 2012 John Wiley & Sons, Ltd.     

SERS quantitative detection of trace human chorionic gonadotropin using a label‐free Victoria blue B as probe in the aggregated immunonanogold sol substrate

Nanogold particles (NG) were modified by anti‐rabbit antibody (RAb) against human chorionic gonadotropin to obtain an immunonanogold probe (ING). In pH 7.0 Na₂HPO₄‐citrate buffer solution containing KCl, ING probes formed large aggregates in which Victoria blue B (VBB) molecules were adsorbed on the surface and which exhibited strong surface‐enhanced Raman scattering (SERS) at a peak of 1612 cm^–1. After addition of human chorionic gonadotropin (hCG) an immune reaction with the ING probe occurred to form dispersive ING–hCG complexes with non‐SERS activity that led to a decreased SERS peak at 1612 cm^–1. The decreased SERS intensity was linear to the concentration of hCG over 2.4–73.2 ng/mL. The ING reaction was studied in detail by SERS, scanning electron microscope (SEM), resonance Rayleigh scattering (RRS), surface plasmon resonance (SPR) absorption and laser scattering techniques. SERS quenching was observed and discussed. Copyright © 2014 John Wiley & Sons, Ltd.     

Trp fluorescence reveals an activation‐dependent cation‐π interaction in the Switch II region of Gαi proteins

Crystal structures of Gα_i (and closely related family member Gα_t) reveal much of what we currently know about G protein structure, including changes which occur in Switch regions. Gα_t exhibits a low rate of basal (uncatalyzed) nucleotide exchange and an ordered Switch II region in the GDP‐bound state, unlike Gα_i, which exhibits higher basal exchange and a disordered Switch II region in Gα_iGDP structures. Using purified Gα_i and Gα_t, we examined the intrinsic tryptophan fluorescence of these proteins, which reports conformational changes associated with activation and deactivation of Gα proteins. In addition to the expected enhancement in tryptophan fluorescence intensity, activation of GαGDP proteins was accompanied by a modest but notable red shift in tryptophan emission maxima. We identified a cation‐π interaction between tryptophan and arginine residues in the Switch II of Gα_i family proteins that mediates the observed red shift in emission maxima. Furthermore, amino‐terminal myristoylation of Gα_i resulted in a less polar environment for tryptophan residues in the GTPase domain, consistent with an interaction between the myristoylated amino terminus and the GTPase domain of Gα proteins. These results reveal unique insights into conformational changes which occur upon activation and deactivation of G proteins in solution.     

Plant cell wall imaging by metabolic click‐mediated labelling of rhamnogalacturonan II using azido 3‐deoxy‐d‐manno‐oct‐2‐ulosonic acid

In plants, 3‐deoxy‐d ‐manno‐oct‐2‐ulosonic acid (Kdo) is a monosaccharide that is only found in the cell wall pectin, rhamnogalacturonan‐II (RG‐II). Incubation of 4‐day‐old light‐grown Arabidopsis seedlings or tobacco BY‐2 cells with 8‐azido 8‐deoxy Kdo (Kdo‐N₃) followed by coupling to an alkyne‐containing fluorescent probe resulted in the specific in muro labelling of RG‐II through a copper‐catalysed azide–alkyne cycloaddition reaction. CMP‐Kdo synthetase inhibition and competition assays showing that Kdo and D‐Ara, a precursor of Kdo, but not L‐Ara, inhibit incorporation of Kdo‐N₃ demonstrated that incorporation of Kdo‐N₃ occurs in RG‐II through the endogenous biosynthetic machinery of the cell. Co‐localisation of Kdo‐N₃ labelling with the cellulose‐binding dye calcofluor white demonstrated that RG‐II exists throughout the primary cell wall. Additionally, after incubating plants with Kdo‐N₃ and an alkynated derivative of L‐fucose that incorporates into rhamnogalacturonan I, co‐localised fluorescence was observed in the cell wall in the elongation zone of the root. Finally, pulse labelling experiments demonstrated that metabolic click‐mediated labelling with Kdo‐N₃ provides an efficient method to study the synthesis and redistribution of RG‐II during root growth.     

Probing the interaction of l‐captopril with metallo‐β‐lactamase CcrA by fluorescence spectra and molecular dynamic simulation

Both the molecular recognition and interaction of metallo‐β‐lactamase CcrA with l ‐captopril were studied by the combined use of fluorescence spectra and molecular dynamic simulation. The results showed that the binding constant was 8.89 × 10⁴ L mol^?1 at 296 K. Both Zn1 and Zn2 displayed tetrahedral coordination geometries in the CcrA–Lcap complex, the S atom in l ‐captopril displaced the nucleophilic hydroxide in apo CcrA and occupied the fourth coordination site for each ion, resulting in a competitively inhibited CcrA enzyme. Strong electrostatic interaction between the two zinc ions in CcrA and negatively charged l ‐captopril provided the main driving force for the binding affinity. Through a partly structural transformation from β‐sheet to random coil, loop 1 (residues 24–34) completely opened the binding pocket of CcrA to allow an induced fit of the newly introduced ligand. This study may provide some valuable information for designing and developing a more tightly binding inhibitor to resist superbugs.     

Chromogenic and fluorescent ‘turn‐on’ chemodosimeter for fluoride based on a F–‐triggered cascade reaction

We developed a new chromogenic and fluorescent ‘turn‐on’ chemodosimeter 1 based on a F^–‐triggered cascade reaction. This system displayed significant changes in UV/vis absorption and fluorescence emission intensities selectively for F^– over other anions in a mixture of CH₃CN/H₂O (95 : 5, v/v) and in acetonitrile. Copyright © 2014 John Wiley & Sons, Ltd.     

Preparation of aminated core‐shell fluorescent nanoparticles and their application to the synchronous fluorescence determination of γ‐globulin

Amino‐modified silica nanoparticles (FSNPs) doped with fluorescein isothiocyanate (FITC) were synthesized by using an aqueous core of reverse‐micelle microemulsion as the nanoreactor in an easy one‐pot method. Due to the FITC conjugating with (3‐aminopropyl)triethoxysilane (APTS), the nanoparticles prevent the FITC from leaching from the silica matrix when immersed in aqueous solution. SEM, FTIR, fluorescence lifetime, a photobleaching experiment and synchronous fluorescence spectra were used to characterize the FSNPs. The synchronous fluorescence signal of FSNPs was enhanced when trace amounts of γ‐globulin (γ‐G) were added. Under the optimal experimental conditions, the enhanced fluorescence intensity (ΔF) was linear with the concentration of γ‐G (c) in the range 0.3–4.8 µg/mL, with a detection limit of 0.04 µg/mL. The proposed method is simple, sensitive for the determination of trace amounts of γ‐G and used to determine the content of γ‐G in synthetic samples with satisfactory results. Copyright © 2008 John Wiley & Sons, Ltd.     

3‐photon fluorescence imaging of sulforhodamine B‐labeled elastic fibers in the mouse skin in vivo

Elastic fibers are key constituents of the skin. The commonly adopted optical technique for visualizing elastic fibers in the animal skin in vivo is 2‐photon microscopy (2 PM) of autofluorescence, which typically suffers from low signal level. Here we demonstrate a new optical methodology to image elastic fibers in animal models in vivo: 3‐photon microscopy (3 PM) excited at the 1700‐nm window combining with preferential labeling of elastic fibers using sulforhodamine B (SRB). First, we demonstrate that intravenous injection of SRB can circumvent the skin barrier (encountered in topical application) and preferentially label elastic fibers, as verified by simultaneous 2 PM of both autofluorescence and SRB fluorescence from skin structures. Then through 3‐photon excitation property characterization, we show that 3‐photon fluorescence can be excited from SRB at the 1700‐nm window, and 1600‐nm excitation is most efficient according to our 3‐photon action cross section measurement. Based on these results and using our developed 1600‐nm femtosecond laser source, we finally demonstrate 3 PM of SRB‐labeled elastic fibers through the whole dermis in the mouse skin in vivo, with only 3.7‐mW optical power deposited on the skin surface. We expect our methodology will provide novel optical solution to elastic fiber research.     

Highly selective and sensitive coumarin–triazole‐based fluorometric ‘turn‐off’ sensor for detection of Pb2+ ions

Exposure to even very low concentrations of Pb²⁺ is known to cause cardiovascular, neurological, developmental, and reproductive disorders, and affects children in particular more severely. Consequently, much effort has been dedicated to the development of colorimetric and fluorescent sensors that can selectively detect Pb²⁺ ions. Here, we describe the development of a triazole‐based fluorescent sensor L5 for Pb²⁺ ion detection. The fluorescence intensity of chemosensor L5 was selectively quenched by Pb²⁺ ions and a clear color change from colorless to yellow could be observed by the naked eye. Chemosensor L5 exhibited high sensitivity and selectivity towards Pb²⁺ ions in phosphate‐buffered solution [20 mM, 1:9 DMSO/H₂O (v/v), pH 8.0] with a 1:1 binding stoichiometry, a detection limit of 1.9 nM and a 6.76 × 10⁶ M^?1 binding constant. Additionally, low‐cost and easy‐to‐prepare test strips impregnated with chemosensor L5 were also produced for efficient of Pb²⁺ detection and proved the practical use of this test.     

Synthesis and fluorescence properties of 1,2,4‐triazolo[3,4‐b]‐1,3,4‐thiadiazol derivatives and their terbium complexes

Eight novel 1,2,4‐triazolo[3,4‐b]‐1,3,4‐thiadiazol derivatives have been designed and synthesized, and their corresponding Tb³⁺ complexes were also prepared successfully. The fluorescence properties and fluorescence quantum yields of the target complexes were investigated, the results showed that the ligands were an efficient sensitizer for Tb³⁺ luminescence, and the target complexes exhibited characteristic fluorescence emissions of Tb³⁺ ion. The fluorescence intensity of the complex substituted by chlorine was stronger than that of other complexes. The substituents' nature has a great effect upon the electrochemical properties of the target complexes. The results showed that the introduction of the electron‐withdrawing groups tended to decrease the oxidation potential and highest occupied molecular orbital energy levels of the target Tb³⁺ complexes; however, introduction of the electron‐donating groups can increase the corresponding complexes' oxidation potential and highest occupied molecular orbital energy levels. Copyright © 2014 John Wiley & Sons, Ltd.     

A fluorescence study of differently substituted 3‐styrylindoles and their interaction with bovine serum albumin

Interaction of 3‐styrylindoles 1–8 viz. 3‐(2‐phenylethenyl‐E)‐NH‐indole (1), 3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (2), 5‐bromo‐3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (3), 5‐methoxy‐3‐[2‐(4‐nitrophenyl)ethenyl‐E]‐NH‐indole (4), 3‐[2‐(4‐cyanophenyl)ethenyl‐E]‐NH‐indole (5), 3‐[2‐(4‐cyanophenyl)ethenyl‐E]‐N‐ethylindole (6), 5‐bromo‐3‐[2‐(4‐chlorophenyl)ethenyl‐E]‐NH‐indole (7) and 5‐methoxy‐3‐[2‐(4‐chlorophenyl)ethenyl‐E]‐NH‐indole (8) with bovine serum albumin (BSA) was examined by UV–vis and steady‐state fluorescence spectroscopy. The fluorescence intensity of 1–8 increases with the increasing BSA concentration. Upon binding with BSA, while 1 and 5–8 show a blue shift in their λ_{f max}, 2–4 do not exhibit such behavior. Compounds 1–8 also quench the 345 nm fluorescence of BSA in phosphate buffer (λ_ex, 280 nm). These compounds intercalate in the hydrophobic regions of BSA, as evidenced by the determination of BSA binding site micropolarity using compounds 2–8. As evidenced by the estimation of energy transfer efficiency and distance between the donor (BSA‐Trp‐212) and the acceptor (3‐styrylindoles), the halo‐substituted compounds 3 and 7 interact with BSA more effectively than the other 3‐strylindoles. These compounds have potential for use as neutral and hydrophobic fluorescence probes for examining the microenvironments in proteins, polymers, micelles, etc. Copyright © 2008 John Wiley & Sons, Ltd.     

Claisen–Schmidt condensation: Synthesis of (1S,6R)/(1R,6S)‐2‐oxo‐N,4,6‐triarylcyclohex‐3‐enecarboxamide derivatives with different substituents in H2O/EtOH

A simple, green, and direct three‐component condensation of acetophenone, aromatic aldehydes with 3‐oxo‐N‐phenylbutanamide (acetoacetanilide) to generate some novel (1S,6R)/(1R,6S)‐2‐oxo‐N,4,6‐triarylcyclohex‐3‐enecarboxamide derivatives was carried out over K₂CO₃ (10 mol%) with high efficiency in water/ethanol as green solvent at room temperature. This protocol proceeded via Claisen–Schmidt condensation and Michael addition. The present methodology offers several advantages, such as short reaction time, high yield, more readily available and inexpensive materials, more environmentally friendly, no need for column chromatography, simple work‐up procedure, and the absence of volatile and hazardous organic solvents.