Spectroscopic investigations on the conformational changes of lysozyme effected by different sizes of N‐acetyl‐l‐cysteine‐capped CdTe quantum dots

The effect of N‐acetyl‐l ‐cysteine‐capped CdTe quantum dots (NAC‐CdTe QDs) with different sizes on lysozyme was investigated by isothermal titration calorimetry (ITC), enzyme activity assays, and multi‐spectroscopic methods. ITC results proved that NAC‐CdTe QDs can spontaneously bind with lysozyme and hydrophobic force plays a major role in stabilizing QDs–lysozyme complex. Multi‐spectroscopic measurements revealed that NAC‐CdTe QDs caused strong quenching of the lysozyme's fluorescence in a size‐dependent quenching manner. Moreover, the changes of secondary structure and microenvironment in lysozyme caused by the NAC‐CdTe QDs were higher with a bigger size. The results of enzyme activity assays showed that the interaction between lysozyme and NAC‐CdTe QDs inhibited the activity of lysozyme and the inhibiting effect was in a size‐dependent manner. Based on these results, we conclude that NAC‐CdTe QDs with larger particle size had a larger impact on the structure and function of lysozyme.     

Interaction and energy transfer studies between bovine serum albumin and CdTe quantum dots conjugates: CdTe QDs as energy acceptor probes

In this paper, a systematic investigation of the interaction of bovine serum albumin (BSA) with water‐soluble CdTe quantum dots (QDs) of two different sizes capped with carboxylic thiols is presented based on steady‐state and time‐resolved fluorescence measurements. Efficient Förster resonance energy transfer (FRET) was observed to occur from BSA donor to CdTe acceptor as noted from reduction in the fluorescence of BSA and enhanced fluorescence from CdTe QDs. FRET parameters such as Förster distance, spectral overlap integral, FRET rate constant and efficiency were determined. The quenching of BSA fluorescence in aqueous solution observed in the presence of CdTe QDs infers that fluorescence resonance energy transfer is primarily responsible for the quenching phenomenon. Bimolecular quenching constant (k_q) determined at different temperatures and the time‐resolved fluorescence data provide additional evidence for this. The binding stoichiometry and various thermodynamic parameters are evaluated by using the van ‘t Hoff equation. The analysis of the results suggests that the interaction between BSA and CdTe QDs is entropy driven and hydrophobic forces play a key role in the interaction. Binding of QDs significantly shortened the fluorescence lifetime of BSA which is one of the hallmarks of FRET. The effect of size of the QDs on the FRET parameters are discussed in the light of FRET parameters obtained.     

The Interactions of Glutathione-Capped CdTe Quantum Dots with Trypsin

Due to their unique fluorescent properties, quantum dots present a great potential for biolabelling applications; however, the toxic interactions of quantum dots with biopolymers are little known. The toxic interactions of glutathione-capped CdTe quantum dots with trypsin were studied in this paper using synchronous fluorescence spectroscopy, fluorescence emission spectra, and UV–vis absorption spectra. The interaction between CdTe quantum dots and trypsin resulted in structure changes of trypsin and inhibited trypsin's activity. Fluorescence emission spectra revealed that the quenching mechanism of trypsin by CdTe quantum dots was a static quenching process. The binding constant and the number of binding sites at 288 and 298 K were calculated to be 1.98 × 10⁶ L mol⁻¹ and 1.37, and 6.43 × 10⁴ L mol⁻¹ and 1.09, respectively. Hydrogen bonds and van der Waals' forces played major roles in this process.     

Spectroscopic investigation of water‐soluble alloyed QDs with bovine serum albumin

We present here a systematic investigation on the interaction between a water‐soluble alloyed semiconductor quantum dot and bovine serum albumin using various spectroscopic techniques i.e. fluorescence quenching, resonance light scattering and synchronous fluorescence spectroscopy. The analysis of fluorescence spectrum and fluorescence intensity indicates that the intrinsic fluorescence of bovine serum albumin (BSA) gets quenched by both static and dynamic quenching mechanism. The Stern‐Volmer quenching constants, energy transfer efficiency parameters, binding parameters and corresponding thermodynamic parameters (ΔH⁰, ΔS⁰ and ΔG⁰) have been evaluated by using van 't Hoff equation at different temperatures. A positive entropy change with a positive enthalpy change was observed suggesting that the binding process was an entropy‐driven, endothermic process associated with the hydrophobic effect. The intermolecular distance (r) between donor (BSA) and acceptor (CdSeS/ZnS quantum dots) was estimated according to Förster's theory of non‐radiative energy transfer. The synchronous fluorescence spectra revealed a blue shift in the emission maxima of tryptophan which is indicative of increasing hydrophobicity. Negative ΔG⁰ values implied that the binding process was spontaneous. It was found that hydrophobic forces played a role in the quenching process. Copyright © 2016 John Wiley & Sons, Ltd.     

Comprehensive study of interaction between biocompatible PEG‐InP/ZnS QDs and bovine serum albumin

Polyethylene glycol (PEG) surface modified biocompatible InP/ZnS quantum dots (QDs) act as a potential alternative for conventional carcinogenic cadmium‐based quantum dots for in vivo and in vitro studies. Comprehensively, we studied the interaction between a model protein bovine serum albumin (BSA) and PEGylated toxic free InP/ZnS QDs using various spectroscopic tools such as absorption, fluorescence quenching, time resolved and synchronous fluorescence spectroscopic measurements. These studies principally show that tryptophan (Trp) residues of BSA have preferable binding affinity towards PEG‐InP/ZnS QDs surface and a blue shift in Trp fluorescence emission is a signature of conformational changes in its hydrophobic microenvironment. Photoluminescence (PL) intensity of Trp is quenched by ground state complex formation (static quenching) at room temperature. However, InP/ZnS@BSA conjugates become unstable with increasing temperature and PL intensity of Trp is quenched via dynamic quenching by PEG‐InP/ZnS QDs. Experimentally determined thermodynamic parameters for these conjugates have shown spontaneity, entropy driven and exothermic nature of bio‐conjugation. The calculated binding affinity (n ? 1, Hill coefficient) suggest that the affinity of InP/ZnS QDs for a BSA protein is not dependent on whether or not other BSA proteins are already bound to the QD surface. Energy transfer efficiency (E), Trp residue to InP/ZnS QDs distances and energy transfer rate (k_T) were all obtained from FÖrster resonance energy.     

Issue information

The effect of 3‐mercaptopropionic acid (MPA)‐capped CdTe quantum dots (QDs) on lysozyme was systematically investigated by spectroscopic methods, enzyme activity assay, and calorimetry techniques. Results show that the MPA‐capped CdTe QDs binded to lysozyme through van der Walls forces and hydrogen bondings, causing the decrement of α‐helical content (～7%) and increment of β‐sheet content (～11%) of lysozyme. The binding caused static quenching of the fluorescence, while the microenvironment of aromatic amino acid residues did not show any significant alteration. The lysozyme activity was affected by the increasing exposure of QDs, it was inhibited to 53.77% under a 6 × 10^?7 M exposure compared with the control group. This work will provide direct evidence about enzyme toxicity of QDs to lysozyme in vitro .     

Intermolecular interaction of fosinopril with bovine serum albumin (BSA): The multi‐spectroscopic and computational investigation

The intermolecular interaction of fosinopril, an angiotensin converting enzyme inhibitor with bovine serum albumin (BSA), has been investigated in physiological buffer (pH 7.4) by multi‐spectroscopic methods and molecular docking technique. The results obtained from fluorescence and UV absorption spectroscopy revealed that the fluorescence quenching mechanism of BSA induced by fosinopril was mediated by the combined dynamic and static quenching, and the static quenching was dominant in this system. The binding constant, K_b, value was found to lie between 2.69 × 10³ and 9.55 × 10³ M^?1 at experimental temperatures (293, 298, 303, and 308 K), implying the low or intermediate binding affinity between fosinopril and BSA. Competitive binding experiments with site markers (phenylbutazone and diazepam) suggested that fosinopril preferentially bound to the site I in sub‐domain IIA on BSA, as evidenced by molecular docking analysis. The negative sign for enthalpy change (ΔH⁰) and entropy change (ΔS⁰) indicated that van der Waals force and hydrogen bonds played important roles in the fosinopril‐BSA interaction, and 8‐anilino‐1‐naphthalenesulfonate binding assay experiments offered evidence of the involvements of hydrophobic interactions. Moreover, spectroscopic results (synchronous fluorescence, 3‐dimensional fluorescence, and Fourier transform infrared spectroscopy) indicated a slight conformational change in BSA upon fosinopril interaction.     

Fluorescence quenching investigation on the interaction of glutathione‐CdTe/CdS quantum dots with sanguinarine and its analytical application

Water‐soluble glutathione (GSH)‐capped core/shell CdTe/CdS quantum dots (QDs) were synthesized. In pH 5.4 sodium phosphate buffer medium, the interaction between GSH‐CdTe/CdS QDs and sanguinarine (SA) was investigated by spectroscopic methods, including fluorescence spectroscopy and ultraviolet‐visible absorption spectroscopy. Addition of SA to GSH‐CdTe/CdS QDs results in fluorescence quenching of GSH‐CdTe/CdS QDs. Quenching intensity was in proportion to the concentration of SA in a certain range. Investigation of the quenching mechanism, proved that the fluorescence quenching of GSH‐CdTe/CdS QDs by SA is a result of electron transfer. Based on the quenching of the fluorescence of GSH‐CdTe/CdS QDs by SA, a novel, simple, rapid and specific method for SA determination was proposed. The detection limit for SA was 3.4 ng/mL and the quantitative determination range was 0.2–40.0 µg/mL with a correlation coefficient of 0.9988. The method has been applied to the determination of SA in synthetic samples and fresh urine samples of healthy human with satisfactory results. Copyright © 2013 John Wiley & Sons, Ltd.     

ZnS quantum dots‐based fluorescence spectroscopic technique for the detection of quercetin

Water‐soluble ZnS quantum dots (QDs) modified by mercaptoacetic acid (MPA) were used to determinate quercetin in aqueous solutions by a fluorescence spectroscopic technique. The results showed that the fluorescence of the modified ZnS QDs could be quenched by quercetin effectively in physiological buffer solution. The optimum fluorescence intensity was found to be at incubation time 10 min, pH 7.0 and temperature 25°C. Under the optimal conditions, the detection limit of quercetin was 5.71 × 10^‐7 mol/L. Moreover, the quenching mechanism was discussed to be a static quenching procedure, which was proved by the quenching rate constant K_q (1.14 × 10¹³ L/mol/s). Copyright © 2013 John Wiley & Sons, Ltd. Copyright © 2013 John Wiley & Sons, Ltd.     

The binding interaction between cadmium‐based,aqueous‐phase quantum dots with Candida rugosa lipase

As a promising biolabeling biomaterials, quantum dots (QDs) present a great potential. However, the toxicity of QDs to organisms has attracted wide attention. In our research, we introduced an in vitro method to study the molecular mechanisms for the structure and activity alterations of Candida rugosa lipase (CRL) with the binding of 3‐mercaptopropionic acid‐capped CdTe QDs. Multiple spectroscopic methods, isothermal titration calorimetry, and enzyme activity measurements were used in this paper. QDs statically quenched the intrinsic fluorescence of CRL with the quenching constant decreases from 2.46 × 10¹³ to 1.64 × 10¹³ L mol^?1 second^?1 (298 to 310 K). It binds to CRL through hydrophobic force with 1 binding site, unfolding and loosening the skeleton and changed its secondary structure. Rather than aggregating on the surface, it enters the pocket of the CRL to interact with Ser‐209 (2.43 Å) and the residues surrounding Ser‐209, making the catalytic triad more exposed. Furthermore, the activity of CRL was inhibited by approximately 15%. This work demonstrates that 3‐mercaptopropionic acid‐capped CdTe QDs may cause negative effects to CRL and obtains a molecular mechanism on QD‐induced toxicity to proteins in vitro.     

Urea‐induced binding between diclofenac sodium and bovine serum albumin: a spectroscopic insight

We investigated the interaction of diclofenac sodium (Dic.Na) with bovine serum albumin (BSA) in the absence and presence of urea using different spectroscopic techniques. A fluorescence quenching study revealed that the Stern–Volmer quenching constant decreases in the presence of urea, decreasing further at higher urea concentrations. The binding constant and number of binding sites were also evaluated for the BSA–Dic.Na interaction system in the absence and presence of urea using a modified Stern–Volmer equation. The binding constant is greater at high urea concentrations, as shown by the fluorescence results. In addition, for the BSA–Dic.Na interaction system, a static quenching mechanism was observed, which was further confirmed using time‐resolved fluorescence spectroscopy. UV–vis spectroscopy provided information about the formation of a complex between BSA and Dic.Na. Circular dichroism was carried out to explain the conformational changes in BSA induced by Dic.Na in the absence and presence of urea. The presence of urea reduced the α‐helical content of BSA as the Dic.Na concentration varied. The distance r between the donor (BSA) and acceptor (Dic.Na) was also obtained in the absence and presence of urea, using fluorescence resonance energy transfer. Copyright © 2015 John Wiley & Sons, Ltd.     

Nitrogen and sulfur co‐doped carbon nanodots toward bovine hemoglobin: A fluorescence quenching mechanism investigation

A deep understanding of the molecular interactions of carbon nanodots with biomacromolecules is essential for wider applications of carbon nanodots both in vitro and in vivo. Herein, nitrogen and sulfur co‐doped carbon dots (N,S‐CDs) with a quantum yield of 16% were synthesized by a 1‐step hydrothermal method. The N,S‐CDs exhibited a good dispersion, with a graphite‐like structure, along with the fluorescence lifetime of approximately 7.50 ns. Findings showed that the fluorescence of the N,S‐CDs was effectively quenched by bovine hemoglobin as a result of the static fluorescence quenching. The mentioned quenching mechanism was investigated by the Stern‐Volmer equation, temperature‐dependent quenching, and fluorescence lifetime measurements. The binding constants, number of binding sites, and the binding average distance between the energy donor N,S‐CDs and acceptor bovine hemoglobin were calculated as well. These findings will provide for valuable insights on the future bioapplications of N,S‐CDs.     

Studies on the Toxic Interaction Mechanism between 2‐Naphthylamine and Herring Sperm DNA

The toxic interaction between 2‐naphthylamine (2‐NA) and herring sperm deoxyribonucleic acid (hs‐DNA) has been thoroughly investigated by UV absorption, fluorescence, and circular dichroism (CD) spectroscopic methods. UV absorption result indicates that 2‐NA may intercalate into the stack base pairs of DNA during the toxic interaction of 2‐NA with DNA. A fluorescence quenching study shows that DNA quenches the intrinsic fluorescence of 2‐NA via a static pathway. The studies on effects of ionic strength and anionic quenching rule out electrostatic and groove bindings as the dominant binding modes. Further studies on denatured DNA fluorescence quenching and thermal melting studies confirm that the dominant binding mode of 2‐NA‐DNA is intercalative binding. A CD spectral study shows that the binding interaction of 2‐NA with DNA leads to the disorganization of the neat double‐helical structure of hs‐DNA. © 2013 Wiley Periodicals, Inc. J BiochemMol Toxicol 27:279‐285, 2013; View this article online at wileyonlinelibrary.com . DOI 10.1002/jbt.21488     

Assay of ceftazidime and cefepime based on fluorescence quenching of carbon quantum dots

A novel and sensitive method for the determination of ceftazidime and cefepime in an active pharmaceutical ingredient (API) has been developed based on the fluorescence quenching of poly(ethylene glycol) (PEG)2000‐capped carbon quantum dots (CQDs) prepared using a chemical oxidation method. The quenching of fluorescence intensity is proportional to the concentration of ceftazidime and cefepime over the range of 0.33–3.30 and 0.24–2.40 µg/mL, respectively. The mode of interaction between PEG2000‐capped CQDs and ceftazidime/cefepime in aqueous solutions was investigated using a fluorescence, UV/Vis and Fourier transform infrared spectrometry (FTIR) at physiological pH. UV/Vis and FTIR spectra demonstrated that ground state compounds were formed through hydrophobic interaction the fluorescence quenching of CQDs caused by ceftazidime and cefepime. The quenching constants decreased with increases in temperature, which was consistent with static quenching. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectroscopic study on the interaction of bovine serum albumin with zinc(II) phthalocyanine

The interaction between the photosensitive antitumour drug, 2(3),9(10),16(17),23(24)‐tetra‐(((2‐aminoethylamino)methyl)phenoxy)phthalocyaninato‐zinc(II) (ZnPc) and bovine serum albumin (BSA) has been investigated using various spectroscopic methods. This work may provide some useful information for understanding the interaction mechanism of anticancer drug–albumin binding and gain insight into the biological activity and metabolism of the drug in blood. Based on analysis of the fluorescence spectra, ZnPc could quench the intrinsic fluorescence of BSA and the quenching mechanism was static by forming a ground state complex. Meanwhile, the Stern–Volmer quenching constant (K_SV), binding constant (K_b), number of binding sites (n) and thermodynamic parameters were obtained. Results showed that the interaction of ZnPc with BSA occurred spontaneously via hydrogen bond and van der Waal's force. According to Foster's non‐radioactive energy transfer theory, the energy transfer from BSA to ZnPc occurred with high possibility. Synchronous fluorescence and circular dichroism (CD) spectra also demonstrated that ZnPc induced the secondary structure of and conformation changes in BSA, especially α helix. Copyright © 2015 John Wiley & Sons, Ltd.     

Spectroscopic exploration and thermodynamic characterization of desvenlafaxine interacting with fluorescent bovine serum albumin

The mechanism of the interaction between bovine serum albumin (BSA) and desvenlafaxine was studied using fluorescence, ultraviolet absorption, 3‐dimensional fluorescence spectroscopy, circular dichroism, synchronous fluorescence spectroscopy, cyclic voltametry, differential scanning calorimetry, and attenuated total reflection–Fourier transform infrared spectroscopic techniques under physiological condition at pH 7.4. Stern‐Volmer calculations authenticate the fluorescence of BSA that was quenched by desvenlafaxine in a collision quenching mode. The fluorescence quenching method was used to evaluate number of binding sites “n” and binding constant K _A that were measured, and various thermodynamic parameters were evaluated at different temperatures by using the van't Hoff equation and differential scanning calorimetry technique, which indicated a spontaneous and hydrophobic interaction between BSA and desvenlafaxine. According to the Förster theory we calculate the distance between the donor, BSA and acceptor, desvenlafaxine molecules. Furthermore, circular dichroism and attenuated total reflection–Fourier transform infrared spectroscopy indicate nominal changes in the secondary structure of the protein.     

Fluorescent probe for detection of Cu2+ using core‐shell CdTe/ZnS quantum dots

Core‐shell CdTe/ZnS quantum dots capped with 3‐mercaptopropionic acid (MPA) were successfully synthesized in aqueous medium by hydrothermal synthesis. These quantum dots have advantages compared to traditional quantum dots with limited biological applications, high toxicity and tendency to aggregate. The concentration of Cu²⁺ has a significant impact on the fluorescence intensity of quantum dots (QDs), therefore, a rapid sensitive and selective fluorescence probe has been proposed for the detection of Cu²⁺ in aqueous solution. Under optimal conditions, the fluorescence intensity of CdTe/ZnS QDs was linearly proportional to the concentration of Cu²⁺ in the range from 2.5 × 10^–9 M to 17.5 × 10^–7 M with the limit of 1.5 × 10^–9 M and relative standard deviation of 0.23%. The quenching mechanism is static quenching with recoveries of 97.30–102.75%. Copyright © 2015 John Wiley & Sons, Ltd.     

Studies on the interaction between Oxaprozin-E and bovine serum albumin by spectroscopic methods

The interaction between Oxaprozin-E and bovine serum albumin (BSA) was studied by spectroscopic methods including fluorescence and UV–vis absorption spectroscopy. The quenching mechanism of fluorescence of BSA by Oxaprozin-E was discussed to be a dynamic quenching procedure. The number of binding sites n and apparent binding constant K was measured by fluorescence quenching method. The thermodynamics parameter ΔH, ΔG, ΔS were calculated. The results indicate the binding reaction was mainly entropy-driven and hydrophobic forces played major role in the binding reaction. The distance r between donor (BSA) and acceptor (Oxaprozin-E) was obtained according to Förster theory of non-radioactive energy transfer.     

Structural studies of mitochondrial coupling factor 1 using tyrosine fluorescence

The absorbance and fluorescence spectral properties of mitochondrial F1-ATPase confirm that this protein does not contain tryptophan residues and therefore its fluorescence is due to tyrosines. The 36% increase in the fluorescence and the almost 100% increase in quantum yield upon denaturation of the protein suggest that a considerable number of tyrosyl residues have a very low quantum yield in the native enzyme. Quenching experiments using iodide indicate that all of the fluorophores are quenched and also all of them with the same quenching constant. These observations are interpreted as confirmatory of what has been found with several other proteins whose fluorescence originates from tyrosyl residues, where the buried tyrosines fluoresce with a much lower quantum yield than those which are exposed. ATP added to F1 previously depleted of loosely bound nucleotides changes the quenching constant of iodide and the quantum yield and this is interpreted to be due to a conformational change induced by the binding of the nucleotide to the enzyme. Addition of 2-mercaptoethanol decreases, although slightly, the polarization of the fluorescence. However, SDS addition gives a much bigger decrease. Hence disulphide bridges are less important for the tertiary structure of the protein than hydrophobic interactions, hydrogen bonding or other forces. Nevertheless the conformational change induced by reduction of disulphide bridges is detected in iodide quenching experiments and the change of the quantum yield of the enzyme.     

Binding of caffeine with caffeic acid and chlorogenic acid using fluorescence quenching,UV/vis and FTIR spectroscopic techniques

The interactions of caffeine (CF) with chlorogenic acid (CGA) and caffeic acid (CFA) were investigated by fluorescence quenching, UV/vis and Fourier transform infrared (FTIR) spectroscopic techniques. The results of the study indicated that the fluorescence quenching between caffeine and hydroxycinnamic acids could be rationalized in terms of static quenching or the formation of non‐fluorescent CF–CFA and CF–CGA complexes. From fluorescence quenching spectral analysis, the quenching constant (K_SV), quenching rate constant (k_q), number of binding sites (n), thermodynamic properties and conformational changes of the interaction were determined. The quenching constants (K_SV) between CF and CGA, CFA are 1.84 × 10⁴ and 1.04 × 10⁴ L/mol at 298 K and their binding site n is ~ 1. Thermodynamic parameters determined using the Van't Hoff equation indicated that hydrogen bonds and van der Waal's forces have a major role in the reaction of caffeine with caffeic acid and chlorogenic acid. The 3D fluorescence, UV/vis and FTIR spectra also showed that the binding of CF with CFA and CGA induces conformational changes in CFA and CGA. Copyright © 2015 John Wiley & Sons, Ltd.