Synthesis of carbon‐based quantum dots from starch extracts: Optical investigations

Carbon‐based quantum dots (C‐QDs) were synthesized through microwave‐assisted carbonization of an aqueous starch suspension mediated by sulphuric and phosphoric acids. The as‐prepared C‐QDs showed blue, green and yellow luminescence without the addition of any surface‐passivating agent. The C‐QDs were further analyzed by UV?vis spectroscopy to measure the optical response of the organic compound. The energy gaps revealed narrow sizing of C‐QDs in the semiconductor range. The optical refractive index and dielectric constant were investigated. The C‐QDs size distribution was characterized. The results suggested an easy route to the large scale production of C‐QDs materials.     

Preparation of carbon quantum dots based high photostability luminescent membranes

Urethane acrylate (UA) was used to prepare carbon quantum dots (C‐dots) luminescent membranes and the resultants were examined with FT‐IR, mechanical strength, scanning electron microscope (SEM) and quantum yields (QYs). FT‐IR results showed the polyurethane acrylate (PUA) prepolymer –C = C‐vibration at 1101 cm^?1 disappeared but there was strong vibration at1687cm^?1which was contributed from the–C = O groups in cross‐linking PUA. Mechanical strength results showed that the different quantity of C‐dots loadings and UV‐curing time affect the strength. SEM observations on the cross‐sections of the membranes are uniform and have no structural defects, which prove that the C‐dots are compatible with the water‐soluble PUA resin. The C‐dot loading was increased from 0 to 1 g, the maximum tensile stress was nearly 2.67 MPa, but the tensile strain was decreased from 23.4% to 15.1% and 7.2% respectively. QYs results showed that the C‐dots in the membrane were stable after 120 h continuous irradiation. Therefore, the C‐dots photoluminescent film is the promising material for the flexible devices in the future applications.     

Assay of ceftazidime and cefepime based on fluorescence quenching of carbon quantum dots

A novel and sensitive method for the determination of ceftazidime and cefepime in an active pharmaceutical ingredient (API) has been developed based on the fluorescence quenching of poly(ethylene glycol) (PEG)2000‐capped carbon quantum dots (CQDs) prepared using a chemical oxidation method. The quenching of fluorescence intensity is proportional to the concentration of ceftazidime and cefepime over the range of 0.33–3.30 and 0.24–2.40 µg/mL, respectively. The mode of interaction between PEG2000‐capped CQDs and ceftazidime/cefepime in aqueous solutions was investigated using a fluorescence, UV/Vis and Fourier transform infrared spectrometry (FTIR) at physiological pH. UV/Vis and FTIR spectra demonstrated that ground state compounds were formed through hydrophobic interaction the fluorescence quenching of CQDs caused by ceftazidime and cefepime. The quenching constants decreased with increases in temperature, which was consistent with static quenching. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and application of solvent‐modulated self‐doped N–S multicolour fluorescence carbon quantum dots

In this paper, two types of carbon quantum dot (CQDs) were prepared using biocompatible l ‐methionine as the carbon source and urea as the nitrogen source and a one‐step hydrothermal treatment. By changing the reaction solvents (deionized (DI) water and dimethylformamide (DMF)), the maximum emission of the resulting CQDs shifted from blue to red light. Specifically, the emission wavelength of the CQDs moved from 433 nm to 625 nm following embedding of a new functional group (–CONH–) on the surface of the CQDs. Photoluminescence quantum yields of the CQDs with blue and red emission reached 64% and 61%, respectively. The R‐CQDs were used to detect metal ions and a linear relationship was demonstrated between ln(F/F₀) and Fe³⁺ concentration in the range 0–0.5 mmol/L with a detection limit of 0.067 μM. Therefore these R‐CQDs have great potential as fluorescent probes for Fe³⁺ detection. We expect that the excellent water‐soluble, biocompatible and optical properties of the CQDs developed in this work mean that they will be widely used to detect biological cells.     

High quantum yield and well‐dispersed quantum dots luminescent composite through sodium carboxymethyl starch

It is a challenging task to prepare well‐dispersed and highly luminescent quantum dots (QDs) powder and a new strategy is reported in this article. Sodium carboxymethyl starch (CMS‐Na) was employed in this work to prepare the QDs–starch composite. Ultraviolet (UV) light shows that the blank starches had no fluorescence, while the QDs‐starches were highly luminescent. Scanning electron microscopy (SEM) observation shows that the QDs–starch composite has the typical particle morphology with the diameter around 200 nm. Energy dispersive X‐ray spectroscopy (EDX) results show that there are intensive tellurium (Te) and cadmium (Cd) element signals. Combined fluorescent lifetime and steady‐state spectrometer show that the QDs–starch quantum yields (QYs) increase when the QDs loading increases from 1 × 10^?6 mol/g to 2 × 10^?6 mol/g, but when the loadings further increase, the QYs decrease slightly. For the red colour (λ_em = 660 nm) QDs, the QYs can reach to as high as 28.2%, and for the other colour QDs they can also have the QYs above 22%. Time‐resolved photobleaching experiments show that the fluorescent QDs–starch composite has a half‐decay time of 40.23 s. These results indicate that the CMS‐Na is a promising QDs dispersant to obtain high QY QD composites.     

An overview of synthetic methods and applications of photoluminescence properties of carbon quantum dots

Carbon quantum dots (CQDs) are promising carbonaceous nanomaterials fortuitously discovered in 2004. CQDs are the rising stars in the nanotechnology ensemble because of their unique properties and widespread applications in sensing, imaging, medicine, catalysis, and optoelectronics. CQDs are notable for their excellent solubility and effective luminescence and, as a result, they are also known as carbon nanolights. Many strategies are used for the efficient and economical preparation of CQDs; however, CQDs prepared from waste or green sustainable methods have greater requirements due to their safety and ease of synthesis. Sustainable chemical strategies for CQDs have been developed, emphasizing green synthetic methodologies based on ‘top-down’ and ‘bottom-up’ approaches. This review summarizes many such studies relevant to the development of sustainable methods for photoluminescent CQDs. Furthermore, we have emphasized recent advances in CQDs' photoluminescence applications in chemical and biological fields. Finally, a brief overview of synthetic processes using the green source and their associated applications are tabulated, providing a clear understanding of the new optoelectronic materials.     

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2+

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺. Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇/F₅₉₀ and the concentration of Hg²⁺. The detection range was 10–70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.     

荧光量子点探针及其标记技术

量子点作为一种新型荧光标记物,与有机染料和荧光蛋白质相比,它们具有可调谐且宽的吸收光谱,激发可产生多重荧光颜色、强荧光信号、抗光漂白能力强等独特的光学特性,使其广泛应用在生物和医学领域。该文就量子点探针的表面修饰和功能化及其标记技术的研究进展进行了阐述。     

Synthesis of glutathione-capped CdS quantum dots and preliminary studies on protein detection and cell fluorescence image.

A series of glutathione (GSH)-capped aqueous CdS quantum dots (QDs) with strong photoluminescence (PL) were prepared by changing the reaction temperatures and times on the basis of optimization of the mole ratio of S to Cd. The reaction time was shortened to about 1/10 compared with that reported previously by increasing the reaction temperature. The absorption and fluorescence spectra indicated good optical properties with PL full width of half-maximum (FWHM) of about 100 nm. The excitation spectrum was broad and continuous in the range 200-480 nm. The PL quantum efficiency (QE) of the prepared QDs was about 36% compared with rhodamine 6G (95%). The shape and size of the CdS QDs were characterized using high-resolution transmission electron microscopy (HRTEM). The prepared QDs were conjugated with bovine serum albumin (BSA) and onion inner pellicle cells and used as fluorescence probes for the first time. The results demonstrated that the fluorescence of CdS can be enhanced by BSA and the enhanced fluorescence intensity is proportional to the concentration of BSA in the range 1.0-10 mg/L. The aggregation of CdS in onion inner pellicle cells and its fluorescence images indicated that the QDs can aggregate around cells soaked for 8 h in CdS solution but enter the interior of cells and become aggregated to the nucleus when they are soaked in CdS solution for longer, e.g. 98 h.     

碳量子点抗菌活性的研究进展

碳量子点（Carbon quantum dots,CQDs）是一种新型碳纳米材料,具有独特的性质,逐渐得到广泛关注。由于CQDs主要是通过“自下而上”的方法制备,其表面具有更加丰富多样的基团,因此更容易衍生化和功能化,进而更容易得到具有特殊性质和功能的CQDs。同时,CQDs在水溶性、可修饰性、耐光漂白等方面具有明显的优势,并且还兼具低生物毒性和良好的生物相容性,使其在生物成像、生物传感和生物分子/药物传递等方面具有潜在的应用价值。随着CQDs研究的增多,各种不同功能化的CQDs得到发展,并被越来越多地用于抗菌方面。根据CQDs目前在医学领域的发展,本文对CQDs在抗菌方面的最新研究进展作一综述。     

Development of antiviral carbon quantum dots that target the Japanese encephalitis virus envelope protein

Japanese encephalitis is a mosquito-borne disease caused by the Japanese encephalitis virus (JEV) that is prevalent in Asia and the Western Pacific. Currently, there is no effective treatment for Japanese encephalitis. Curcumin (Cur) is a compound extracted from the roots of Curcuma longa, and many studies have reported its antiviral and anti-inflammatory activities. However, the high cytotoxicity and very low solubility of Cur limit its biomedical applications. In this study, Cur carbon quantum dots (Cur-CQDs) were synthesized by mild pyrolysis-induced polymerization and carbonization, leading to higher water solubility and lower cytotoxicity, as well as superior antiviral activity against JEV infection. We found that Cur-CQDs effectively bound to the E protein of JEV, preventing viral entry into the host cells. In addition, after continued treatment of JEV with Cur-CQDs, a mutant strain of JEV was evolved that did not support binding of Cur-CQDs to the JEV envelope. Using transmission electron microscopy, biolayer interferometry, and molecular docking analysis, we revealed that the S123R and K312R mutations in the E protein play a key role in binding Cur-CQDs. The S123 and K312 residues are located in structural domains II and III of the E protein, respectively, and are responsible for binding to receptors on and fusing with the cell membrane. Taken together, our results suggest that the E protein of flaviviruses represents a potential target for the development of CQD-based inhibitors to prevent or treat viral infections.     

碳量子点对模式植物拟南芥的生物效应研究

以模式植物拟南芥（Arabidopsis thaliana（L.）Heynh）为材料,从生理及分子层面研究碳量子点（Carbon quantum dots,CQDs）对拟南芥生物效应的影响。结果显示,CQDs能被拟南芥根部吸收并连续运输到叶片,对种子萌发率无明显影响,但能显著促进幼苗主根伸长和株重的增加。幼苗叶片叶绿体中色素含量随CQDs浓度的升高而显著降低。脯氨酸与丙二醛含量随CQDs浓度的升高呈先上升后下降趋势。超氧化物歧化酶（SOD）和过氧化氢酶（CAT）活性随CQDs浓度的升高呈先上升后下降趋势,在抗氧化酶系统中起主导作用;叶片内源过氧化氢（H₂O₂）的积累随CQDs浓度的升高而升高,具有显著的浓度依赖效应。与其他纳米材料处理不一样的是,硫同化及胁迫相关基因在CQDs处理后表达量下调,这可能与CQDs粒子本身的特性有关。     

Paper mill sludge-based carbon quantum dots as a specifically ratiometric fluorescent probe for the sensitive and selective detection of coptisine

Coptisine (COP), one of the bioactive components in Rhizoma Coptidis, has many pharmacological effects. Meanwhile, the determination of COP is essential in pharmacological and clinical applications. Herein, we prepared carbon quantum dots (CQDs) by one-step oil-thermal method using paper mill sludge (PMS) as precursor, and developed a ratiometric fluorescence method for the determination of COP. The structural and optical properties of PMS-CQDs were evaluated through high-resolution transmission electron microscopy (HRTEM), Fourier-transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), ultraviolet-visible (UV-vis), fluorescence, zeta potential and fluorescence lifetime experiments. Fluorescence intensity ratio at 550 nm and 425 nm (I₅₅₀/I₄₂₅) was recorded as an index for quantitative detection of COP. The detection concentration of COP ranges from 0.1 to 50 μM in good linear correlation (R² = 0.9974) with a limit of detection of 0.028 μM (3σ/k). The quenching mechanism was deduced to be inner filter effect and static quenching. The ratiometric fluorescent probe showed impressive selectivity and sensitivity towards COP, and was successfully applied to the detection of COP in human urine with expected recoveries (95.22–111.00%) and relative standard deviations (0.46–2.95%), indicating that our developed method has a great application prospect in actual sample detection.     

One-step hydrothermal preparation of chiral carbon quantum dots and enantioselective sensing of glutamine enantiomeric isomers

A novel method for chiral identification of glutamine enantiomers based on chiral carbon quantum dots (cCQDs) fluorescent probes. cCQDs were prepared using a one-step hydrothermal method with L-tryptophan as the carbon source and chiral source, producing spherical nanoparticles exhibiting a blue colour luminescence. The fluorescence intensity (F) of cCQDs was enhanced or quenched following the addition of chiral enantiomeric glutamine (L/D-Gln), and therefore cCQDs, as a fluorescence probe, could be used for enantioselective sensing of the L/D-Gln. The fluorescence enhancement value (∆F_E) exhibited good linearity with L-Gln concentration in the range 0.23–10.00 mM, and the limit of detection was 0.14 mM. The fluorescence quenching value (∆F_Q) showed a good linear relationship with D-Gln concentration in the range 0.29–10.00 mM, and the detection limit was 0.18 mM. The mechanism of fluorescence enhancement/quenching was explored by molecular modelling and the type of quenching. The method was applied to the determination of L-Gln content in real samples, and the recovery rate was satisfactory. This study provided a novel approach for the synthesis of cCQDs and the recognition of amino acid enantiomers.     

Tunable excitation properties of ZnCdS:Mn/ZnS quantum dots for cancer imaging

Water‐soluble ZnS:Mn quantum dots (QDs) were synthesized using a hydrothermal method with 3‐mercaptopropionic acid as stabilizer. The optical properties of ZnS:Mn QDs were thoroughly investigated by tuning the doping concentration of Mn²⁺ and the Zn/S precursor ratio, to obtain an optimal parameter for QDs with excellent fluorescence characteristics. ZnS:Mn QDs excited at only one wavelength, however, which seriously limited their further application. Here, a trace Cd ion was doped into a ZnS host, resulting in QD excitation covering a wide adjustable waveband. Furthermore, when a ZnS shell was coated onto the surface of the ZnCdS:Mn QDs, photoluminescence intensity and stability were further enhanced. After coupling with an anti‐CK 19 antibody, the ZnCdS:Mn/ZnS core/shell QDs were able to function by labeling cancer cells, indicating that they could be considered as a suitable bio‐probe for cells and tissue imaging.     

Aqueous synthesis of CdTe/CdS/ZnS quantum dots and their optical and chemical properties

In this paper, we described a strategy for synthesis of thiol‐coated CdTe/CdS/ZnS (core–shell–shell) quantum dots (QDs) via aqueous synthesis approach. The synthesis conditions were systematically optimized, which included the size of CdTe core, the refluxing time and the number of monolayers and the ligands, and then the chemical and optical properties of the as‐prepared products were investigated. We found that the mercaptopropionic acid (MPA)‐coated CdTe/CdS/ZnS QDs presented highly photoluminescent quantum yields (PL QYs), good photostability and chemical stability, good salt tolerance and pH tolerance and favorable biocompatibility. The characterization of high‐resolution transmission electron microscopy (HRTEM), X‐ray powder diffraction (XRD) and fluorescence correlation spectroscopy (FCS) showed that the CdTe/CdS/ZnS QDs had good monodispersity and crystal structure. The fluorescence life time spectra demonstrated that CdTe/CdS/ZnS QDs had a longer lifetime in contrast to fluorescent dyes and CdTe QDs. Furthermore, the MPA‐stabilized CdTe/CdS/ZnS QDs were applied for the imaging of cells. Compared with current synthesis methods, our synthesis approach was reproducible and simple, and the reaction conditions were mild. More importantly, our method was cost‐effective, and was very suitable for large‐scale synthesis of CdTe/CdS/ZnS QDs for future applications. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of cadmium selenide quantum dots doped by europium and investigation of their chemiluminescence properties and antibacterial activities

Nanoparticles of cadmium selenide (CdSe) doped with europium, were synthesized as stabilizing agents using thioglycolic acid ligand. This method is based on the enhancing effect of CdSe quantum dots (QDs) doped with europium on chemiluminescence (CL) emission. This emission was generated by mixing CdSe QDs with manganese (II), iron (II) and chrome (II) sulfates as catalysts in the presence of hydrogen peroxide (H₂O₂). The structural characteristics and morphology of these nanoparticles were investigated by scanning electron microscopy, Fourier transform infrared spectroscopy, ultraviolet–visible absorption spectroscopy, X‐ray pattern and dynamic light scattering methods. The CdSe QDs doped with europium were used as the sensitizer in a luminol?hydrogen peroxide CL system. The sensitized CdSe QDs were analyzed for antibacterial activity against Gram‐positive or Gram‐negative bacteria. The results showed that the CdSe QDs are effective against all the studied bacteria, effectiveness was especially higher for Bacillus subtilis.     

Effect of heteroatom-doped carbon quantum dots on the red emission of metal-conjugated phthalocyanines through hybridization

Quantum dots (QDs) are significant fluorescent materials for energy transfer studies with phthalocyanines (Pcs) and phthalocyanine (Pc)-like biomolecules (such as chlorophylls). Carbon-based QDs, especially, have been used in numerous studies concerning energy transfer with chlorophylls, but the numbers of studies concerning energy transfer between phthalocyanines and carbon-based QDs are limited. In this study, peripherally, hydroxythioethyl terminal group substituted metal-free phthalocyanine (H₂Pc) and zinc phthalocyanine (ZnPc) were noncovalently (electrostatic and/or π–π interaction) attached to carbon QDs containing boron and nitrogen to form QD-Pc nanoconjugates. The QD-Pc conjugates were characterized using different spectroscopic techniques (Fourier transform infrared spectroscopy and transmission electron microscopy). The absorption and fluorescence properties of QD-Pc structures in solution were studied. It was found that the quantum yields of the QDs slightly decreased from 30% to 25% upon doping the QDs with heteroatoms B and N. Förster resonance energy transfer efficiency was calculated as 33% for BCN-QD/ZnPc. For the other conjugates, almost no energy transfer from QDs to Pc cores was observed. It was shown that the energy transfer between QDs to Pc cores was completely different from the energy transfer between QDs and photosynthetic pigments, and therefore we concluded that heteroatom doping in the QD structure and the existence of zinc metal in the phthalocyanine structure is obligatory for an efficient energy transfer.     

Circular dichroism of surface complexes based on quantum dots and azo dye

Chiral properties of surface complexes based on CdSe/ZnS quantum dots (QDs) and 1‐(2‐pyridylazo)‐2‐naphthol (PAN) azo dye were investigated by circular dichroism spectroscopy. The use of L‐, D‐cysteine (Lcys, Dcys) capping ligands allowed us to obtain water‐soluble chiral QD‐PAN complexes. The characterization of the complexes was performed by UV‐vis, FTIR, and CD spectroscopy. Quantum chemical TDDFT calculated CD spectra reproduced the experimentally observed sign patterns, which originate from binding Lcys or Dcys and PAN molecules to the same Zn atom on the QD surface. The resulting complex is characterized by a large circular dichroism in comparison with an ordinary QD chirality induced by cysteine molecules. The pattern of CD signal is the same for Lcys and Dcys ligands in chiral QD‐PAN complex.     

Influence of the KBr matrix on the luminescence properties of CdTe quantum dots

The investigation of the luminescence properties of CdTe/KBr composites with encapsulated quantum dots (QDs) of different sizes was performed and the influence of the KBr matrix on the luminescence properties of CdTe QDs was studied. Encapsulation of nanoparticles by a solid matrix caused a bathochromic shift in the luminescence peak and the shift value was the larger the smaller the size of the quantum dots. Interband quantum transition theory was used to explain the influence of the matrix on the luminescence properties of the capsulated CdTe QDs. Theoretical calculations showed that the observed QD luminescence peak corresponded to a 1 s–1 s electronic transition, and its low‐energy shift after the transfer of QDs from dielectric water to the KBr matrix was due to a corresponding decrease in the depths of electrons and holes potential wells.