Sr2ZnWO6:Eu3+,Bi3+,Li+: a potential white‐emitting phosphor for near‐ultraviolet white light‐emitting diodes

A series of Sr₂ZnWO₆ phosphors co‐doped with Eu³⁺, Bi³⁺ and Li⁺ were prepared using the Pechini method. The samples were tested using X‐ray diffraction and luminescence spectroscopy. The results show that the samples can be effectively excited by near‐ultraviolet (UV) and UV light. The introduction of Bi³⁺ and Li⁺ significantly enhances the fluorescence emission of Sr₂ZnWO₆:Eu³⁺ and changes the light emitted by the phosphors from bluish‐green to white. When excited at 371 nm, Sr_2–x–zZn_1–yWO₆:xEu³⁺,yBi³⁺,zLi⁺ (x = 0.05, y = 0.05, z = 0.05, 0.1 and 0.15) samples emit high‐performance white light. Intense red–orange emission is also observed when excited by UV light. The obtained phosphor is a potential white‐emitting phosphor that could meet the needs of excitation sources with near‐UV chips. In addition, this phosphor might have promising application as a red–orange emitting phosphor for white light‐emitting diodes based on UV light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of red emitting phosphor La2–xEuxLi0.5Al0.5O4 [x = 0.2–2] with K2NiF4 structure

Europium (Eu)³⁺‐substituted La₂Li_0.5Al_0.5O₄ red emitting phosphors were prepared by a conventional high‐temperature solid‐state reaction method. Powder X‐ray diffraction, diffuse reflectance spectra and spectrofluorometry were used as vital characterizing tools for the phosphors. The Eu concentration dependence luminescence properties and Judd–Ofelt intensity parameters were investigated and calculated, respectively. All compositions showed an orange red emission (due to the magnetic and electric dipole transitions of the Eu³⁺ ion) with the appropriate Commission Internationale de l'Eclairage (CIE) colour gamut under near ultraviolet or blue ray light excitation. The calculated critical distance showed that the energy transfer occured between Eu to Eu via an exchange mechanism. The Eu_1.4La_0.6Li_0.5Al_0.5O₄ composition showed the highest red emission intensity with CIE colour saturation compared with that of the commercial Eu‐activated yttrium oxysulfide red phosphor.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Eu3+–Eu2+‐doped xAl2O3–ySiO2 and xAl2O3–zMgO composites phosphors

In this paper, the Eu³⁺–Eu²⁺ (4%, molar ratio)‐doped xAl₂O₃–ySiO₂ (x = 0–2.5, y = 1–5) and xAl₂O₃–zMgO (x = 0–1.5, z = 0–3) composites phosphors with different Al₂O₃ to SiO₂ (A/S) and Al₂O₃ to MgO (A/M) ratios were prepared using a high‐temperature solid‐state reaction under air atmosphere. The effects of the A/S and A/M on luminescence properties, crystal structure, electron spin resonance, and Commission Internationale de l’Eclairage chromaticity coordinates of the samples were systematically analyzed. These results indicated that the different A/S and A/M ratios in the matrix effectively affected the crystal phase, degrees of self‐reduction of Eu³⁺, and led the relative emission intensity of Eu²⁺/Eu³⁺ to change and adjust.     

Sol–gel preparation and luminescent properties of red‐emitting phosphor Sr‐Ba‐Mo‐W‐O‐(Eu3+,Sm3+)

Two series of red‐emitting phosphors Sr‐Ba‐Mo‐W‐O:Eu,Sm and Sr‐Ba‐Mo‐W‐O:Eu have been synthesized by a sol–gel method. The effects of the chemical composition, concentrations of Sm³⁺ and Eu³⁺, the Sr²⁺/Ba²⁺ ratio, and the W⁶⁺/Mo⁶⁺ ratio on the luminescent properties were investigated. The as‐prepared phosphors were characterized by X‐ray diffraction and Raman spectra. Results showed that single phases of the two series were prepared. The compositions of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 had the strongest luminescent intensity. The excitation spectra of Sm³⁺, Eu³⁺ co‐doped phosphors were broader and the strongest peak moved to 404 nm when compared with that of Eu³⁺ single‐doped phosphors. The luminescent intensity of the Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 at 618 nm were 2.8 times greater than that of Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10. The luminescent intensity of Sr_0.6Ba_0.13Mo_0.8 W_0.2O₄:Eu_0.10Sm_0.08 and Sr_0.75Ba_0.1Mo_0.8 W_0.2O₄:Eu_0.10 at 150 °C decreased to 56.8% and 50.3% of the initial value at room temperature, respectively. Copyright © 2015 John Wiley & Sons, Ltd.     

Eu3+‐activated Y2MoO6: a narrow band red‐emitting phosphor with strong near‐UV absorption

Near‐UV excited narrow line red‐emitting phosphors, Eu³⁺‐activated Y₂MoO₆ systems, were synthesized using a simple molten salt reaction. The structure and photoluminescence characteristics were investigated using X‐ray powder diffraction, UV–Vis absorption and fluorescent spectrophotometry. The excitation spectra show strong broad‐band absorptions in the near‐UV to blue light regions which match the radiation of near‐UV light‐emitting diode chips well. Under excitation of either near‐UV or blue light, intense red emission with a main peak of 611 nm is observed, ascribed to the ⁵D₀–⁷F₂ transition of Eu³⁺ ions; the optimal doping concentration is 20 mol%. The chromaticity coordinates (x = 0.65, y = 0.34) of the as‐obtained phosphor are very close to the National Television Standard Committee standard values (x = 0.67, y = 0.33). All these characteristics suggest that this material is a promising red‐emitting phosphor candidate for white‐LEDs based on near‐UV LED chips. Copyright © 2012 John Wiley & Sons, Ltd.     

Tunable photoluminescence properties of Sr1‐yCayMoO4:Sm3+ phosphors (0 ≤ y < 1)

A series of Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors was synthesized by a conventional solid‐state reaction method in air, and their structural and spectroscopic properties were investigated. The optimal doping concentration of Sm³⁺ in SrMoO₄:Sm³⁺ phosphor is 5 mol%. Under excitation with 275 nm, in Sr_1‐x‐yCa_yMoO₄:xSm³⁺ (0 ≤ x ≤ 7 mol% and 0 ≤ y < 1) phosphors, the emission band of the host was found to overlap with the excitation bands peaking at ~500 nm of Sm³⁺ ion, and the energy transfer from MoO₄^2? group to Sm³⁺ ion can also be observed. The International Commission on Illumination (CIE) chromaticity coordinates of Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation 275 nm varied systematically from an orange (0.4961, 0.3761) (y = 0) to a white color (0.33, 0.3442) (y = 0.95) with increasing calcium oxide (CaO) concentration. However, Sr_0.95‐yCa_yMoO₄:0.05Sm³⁺ phosphors with excitation at 404 nm only showed red emission and the energy transfer between MoO₄^2? group to Sm³⁺ ion was not observed. The complex mechanisms of luminescence and energy transfer are discussed by energy level diagrams of MoO₄^2? group and Sm³⁺ ion. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and optical properties of Eu3+‐substituted glaserite‐type orthovanadates CsK2Y[VO4]2

A new Eu³⁺‐substituted CsK₂Y[VO₄]₂ glaserite‐type orthovanadate phosphor was synthesized by the conventional high temperature solid‐state reaction method. The phase purity was confirmed by powder X‐ray diffraction study and it reveals that all the compositions crystallize in the hexagonal structure. The morphology and elemental composition were measured by FE‐SEM with Energy Dispersive Analysis Of X Rays (EDAX). The band gap is determined by diffuse reflectance spectra. The self‐activated luminescence of the host and Eu³⁺‐substituted luminescence behaviours were studied in detail by photoluminescence spectra. The host CsK₂Y[VO₄]₂ shows green emission, whereas the Eu³⁺‐substituted compositions show red emission. Effect of Eu³⁺ concentrations on the photoluminescence behaviour were also been studied. The Eu³⁺‐doped samples show not only several sharp emission lines but also a broad emission band due to presence of the [VO₄]^3? in the host, which clearly indicates that there is incomplete energy transfer from (VO₄) charge transfer band to Eu³⁺_. The life time of the phosphors also been studied. The Commission Internationale de l'Eclairage (CIE) chromaticity colour coordinates were calculated and it is very much closer to the National Television Standard Committee (NTSC) standards. These investigations evidently reveal that the self‐activated and Eu³⁺‐activated phosphors show a great potential applications as a red phosphor for solid‐state lighting includes white light‐emitting diodes (wLEDs).     

The luminescent properties and crystal structure of Sr(1.5‐x)‐(1.5y)Mg0.5SiO4:xEu2+,yCe3+ blue phosphor synthesized by co‐precipitation method

In order to improve the luminescent performance of silicate blue phosphors, Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ phosphors were synthesized using one‐step calcination of a precursor prepared by chemical co‐precipitation. The crystal structure and luminescent properties of the phosphors were analyzed using X‐ray diffraction and fluorescence spectrophotometry, respectively. Because the activated ions (Eu²⁺) can occupy two different types of sites (Sr₁ and Sr₂), the emission spectrum of Eu²⁺ excited at 350 nm contains two single bands (EM₁ and EM₂) in the wavelength range 400–550 nm, centered at 463 nm, and the emission intensity first increases and then decreases with increasing concentrations of Eu²⁺ ions. Co‐doping of Ce³⁺ ions can greatly enhance the emission intensity of Eu²⁺ by transferring its excitation energy to Eu²⁺. Because of concentration quenching, a higher substitution concentration of Ce³⁺ can lead to a decrease in the intensity. Meanwhile, the quantum efficiency of the phosphor is improved after doping with Ce³⁺, and a blue shift phenomenon is observed in the CIE chromaticity diagram. The results indicate that Sr_{(1.5‐x)‐(1.5y)}Mg_0.5SiO₄:xEu²⁺,yCe³⁺ can be used as a potential new blue phosphor for white light‐emitting diodes.     

Nd3+‐Yb3+/Nd3+‐Yb3+‐Li+ co‐doped Gd2O3 phosphors for up and down conversion luminescence

Frequency up‐conversion (UC) emission from the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped gadolinium oxide (Gd₂O₃) phosphors prepared by the solution combustion technique in the visible range have been studied by using 980 nm near infrared (NIR) laser diode excitation. The crystalline structure and formation of the cubic phase has been confirmed with the help of X‐ray diffraction (XRD) studies. XRD peak shifts have been found towards the lower diffraction angle side in the case of the Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. Surface morphology and particle size information have been observed by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis. Down‐conversion emission study under 351 nm excitation in the visible region for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors has been performed. The UC emission bands lying in the green and red region arising from the Nd³⁺ ions have been enhanced by ~260 times, ~113 times due to incorporation of Li⁺ ions in the Nd³⁺‐Yb³⁺ co‐doped phosphors. Photometric characterization has been done for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. The present study suggests the capability of the synthesized phosphors in near‐infrared (NIR) to visible upconverter and luminescent device applications.     

Synthesis and characterization of Y(1‐x)Eu(x)(TTA)3(Phen) organic luminescent thin films

Yttrium is stoichiometrically doped into europium by mole percentage, during the synthesis of Y_(1‐x)Eu_(x)(TTA)₃(Phen), using solution techniques (where x = 0.2, 0.4, 0.5, 0.6 and 0.8, TTA = thenoyltrifluoroacetone and Phen = 1,10‐phenanthroline).These complexes were characterized using different techniques such as X‐ray diffraction, thermogravimetric/differential thermal analysis, optical absorption and emission spectra. Thin films of the doped Eu–Y complexes were prepared on a glass substrate under a high vacuum of 10^‐6 Torr. The photoluminescence spectra of these thin films were recorded by exciting the sample at a wavelength of 360 nm. The emission peak for all the synthesized complexes centered at 611 nm; maximum emission intensity was obtained from Y_0.6Eu_0.4 (TTA)₃(Phen). The results proved that these doped complexes are more economical than pure Eu(TTA)₃(Phen) and are best suited as red emissive material for energy‐efficient and eco‐friendly organic light‐emitting diodes and displays. Copyright © 2013 John Wiley & Sons, Ltd.     

A promising RVO4:Eu3+,Li+@SiO2 (R = Gd,Y and Gd/Y) red‐emitting phosphor with improved luminescence (cd/m2) and colour purity for optical display applications

Red emission intensity was optimized in three stages, by investigating the effects of: (i) host composition (Gd, Y and Gd/Y), (ii) codoping Li⁺ as a sensitizer and, finally, (iii) with a SiO₂ shell coating as a protecting layer. Lanthanide vanadate powder phosphors were synthesized using a modified colloidal precipitation technique. The effects of SiO₂ coating on phosphor particles were characterized using scanning electron microscopy (SEM)‐EDAX, transmission electron microscopy (TEM), Fourier transform infrared (FTIR) and photoluminescence (PL) measurements. An improvement in the PL intensity on Li codoping was due to improved crystallinity, which led to higher oscillating strengths for the optical transitions, and also a lowering of the inversion symmetry of Eu³⁺ ions. Red emission intensity due to ⁵D₀ → ⁵D₂ transition of the phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01 was enhanced by 22.28% compared with Y_0.95VO₄:Eu³⁺_0.05, and was further improved by 58.73% with SiO₂ coating. The luminescence intensity (I) and colour coordinates (x, y) of the optimized phosphor Y_0.94VO₄:Eu³⁺_0.05,Li⁺_0.01@SiO₂, where I = 13.07 cd/m² and (x = 0.6721, y = 0.3240), were compared with values for a commercial red phosphor (Y₂O₂S:Eu³⁺), where I = 27 cd/m² and (x = 0.6522, y = 0.3437). The measured colour coordinates are superior to those of the commercial red phosphor, and moreover, match well with standard NTSC values (x = 0.67, y = 0.33). Copyright © 2015 John Wiley & Sons, Ltd.     

Tunable luminescence and energy transfer in Ca3SiO4Cl2:Ce3+,Li+,Mn2+,Eu2+ phosphors

A series of color‐tunable Ca_{3–2x‐y‐z}SiO₄Cl₂ (CSC):xCe³⁺,xLi⁺,yMn²⁺,zEu²⁺ phosphors with low temperature phase structure was synthesized via the sol–gel method. An energy transfer process from Ce³⁺ to Mn²⁺ in CSC:0.01Ce³⁺,0.01Li⁺,yMn²⁺ (y = 0.03–0.09) and the mechanism was verified to be an electric dipole–dipole interaction. The Ce³⁺ and Mn²⁺ emission intensities were greatly enhanced by co‐doping Eu²⁺ ions into CSC:0.01Ce³⁺,0.01Li⁺,0.07Mn²⁺ phosphors due to competitive energy transfers from Eu²⁺/Ce³⁺ to Mn²⁺, and Ce³⁺ to Eu²⁺. Under 332 nm excitation, CSC:0.01Ce³⁺,0.01Li+,0.07Mn²⁺,zEu²⁺ (z = 0.0005–0.002) exhibited tunable emission colors from green to white with coexisting orange, green and violet‐blue emissions. These phosphors could have potential application in white light‐emitting diodes.     

A novel red‐emitting phosphor,KAl1‐xPO4Cl:Eux3+ (0.1 ≤ x ≤ 1.0)

A series of phosphors KAl_1‐xPO₄Cl:Eu_x³⁺ (0.1 ≤ x ≤ 1.0) was synthesized using a facile combustion method using urea as a fuel and their structural, morphological and photoluminescence properties were investigated. It was found that the particle size was in the range of 1–2 µm with an irregular shape. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicated that this phosphor can be efficiently excited by ultraviolet (395 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J = 0, 1, 2) transitions of Eu³⁺. The impact of the Eu³⁺ concentration on the relative emission intensity was investigated, and the best doping concentration is 0.5. The present study suggests that the KAl_0.5PO₄Cl: Eu_0.5³⁺ phosphor is a strong candidate as a red component for phosphor‐ converted white light‐emitting diodes (LEDs). Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence study of Eu3+doped Li6Y(BO3)3 phosphor for solid‐state lighting

In this study, Li₆Y_1–xEu_x(BO₃)₃ phosphor was successfully synthesized using a modified solid‐state diffusion method. The Eu³⁺ ion concentration was varied at 0.05, 0.1, 0.2, 0.5 and 1 mol%. The phosphor was characterized for phase purity, morphology, luminescent properties and molecular transmission at room temperature. The XRD pattern suggests a result closely matching the standard JCPDS file (#80‐0843). The emission and excitation spectra were followed to discover the luminescence traits. The excitation spectra indicate that the current phosphor can be efficiently excited at 395 nm and at 466 nm (blue light) to give emission at 595 and 614 nm due to the ⁵D₀ → ⁷F_j transition of Eu³⁺ ions. Concentration quenching was observed at 0.5 mol% Eu³⁺ in the Li₆Y_1–xEu_x(BO₃)₃ host lattice. Strong red emission with CIE chromaticity coordinates of phosphor is x = 0.63 and y = 0.36 achieved with dominant red emission at 614 nm the ⁵D₀ → ⁷ F₂ electric dipole transition of Eu³⁺ ions. The novel Li₆Y_1–xEu_x(BO₃)₃ phosphor may be a suitable red‐emitting component for solid‐state lighting using double‐excited wavelengths, i.e. near‐UV at 395 nm and blue light at 466 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Effect of different temperatures to remove reduction gas on the photoluminescence properties of Eu‐doped Li2(Ba1‐xSrx)SiO4 phosphors

In this study, Eu‐doped Li₂(Ba_1‐xSr_x)SiO₄ powders (x = 0, 0.2, 0.4, and 0.6) were synthesized at 850°C in a reduction atmosphere (5% H₂ + 95% N₂) for a duration of 1 h using a solid‐state reaction method. The reduction atmosphere was infused as the synthesis temperature reached 850°C, and was removed as the temperature dropped to 800–500°C. Li₂(Ba_1‐xSr_x)SiO₄ (or Li₂BaSiO₄), (Ba,Sr)₂SiO₄ (or BaSiO₄), and Li₄SiO₄ phases co‐existed in the synthesized Eu‐doped Li₂(Ba_1‐xSr_x)SiO₄ powders. A new finding was that the reduction atmosphere removing (RAR) temperature of the Li₂(Ba_1‐xSr_x)SiO₄ phosphors had a large effect on their photoluminescence excitation (PLE) and PL properties. Except for the 800°C‐RAR‐treated Li₂BaSiO₄ phosphor, PLE spectra of all other Li₂(Ba_1‐xSr_x)SiO₄ phosphors had one broad emission band with two emission peaks centred at ~242 and ~283 nm; these PL spectra had one broad emission band with one emission peak centred at 502–514 nm. We showed that the 800°C‐RAR‐treated Li₂BaSiO₄ phosphor emitted a red light and all other Li₂(Ba_1‐xSr_x)SiO₄ phosphors emitted a green light. Reasons for these results are discussed thoroughly.     

Synthesis and characterization of novel europium β‐diketonate organic complexes for solid‐state lighting

Volatile Eu complexes, namely Eu(TTA)₃Phen, Eu_(x)Y_(1‐x)(TTA)₃ Phen; Eu_(x)Tb_(1‐x)(TTA)₃Phen; Eu, europium; Y, yttrium; Tb, Terbium; TTA, thenoyltrifluoroacetone; and Phen, 1,10 phenanthroline were synthesized by maintaining stichiometric ratio. Various characterization techniques such as X‐ray diffraction (XRD), photoluminescence (PL) and thermo gravimetric analysis/differential thermal analysis (TGA/DTA) were carried out for the synthesized complexes. Diffractograms of all the synthesized complexes showed well‐resolved peaks, which revealed that pure and doped organic Eu³⁺ complexes were crystalline in nature. Of all the synthesized complexes, Eu_0.5 Tb_0.5(TTA)₃Phen showed maximum peak intensity, while the angle of maximum peak intensity for all complexes was almost the same with slightly different d‐values. A prominent sharp red emission line was observed at 611 nm when excited with light at 370 nm. It was observed that the intensity of red emissions increased for doped europium complexes Eu_(x)Y_(1‐x)(TTA)₃Phen and Eu_(x)Tb_(1‐x)(TTA)₃ Phen, when compared with Eu complexes. Emission intensity increased in the following order: Eu(TTA)₃Phen > Eu_0.5 Tb_0.5(TTA)₃Phen > Eu_0.4 Tb_0.6(TTA)₃Phen > Eu_0.5Y_0.5(TTA)₃Phen > Eu_0.4Y_0.6(TTA)₃Phen, proving their potential application in organic light‐emitting diodes (OLEDs). TGA showed that Eu complexes doped in Y³⁺ and Tb³⁺ have better thermal stability than pure Eu complex. DTA analysis showed that the melting temperature of Eu(TTA)₃ Phen was lower than doped Eu complexes. These measurements infer that all complexes were highly stable and could be used as emissive materials for the fabrication of OLEDs. Copyright © 2012 John Wiley & Sons, Ltd.     

Eu3+‐tetrakis β‐diketonate complexes for solid‐state lighting application

Eu³⁺–β‐diketonate complexes are used, for example, in solid‐state lighting (SSL) or light‐converting molecular devices. However, their low emission quantum efficiency due to water molecules coordinated to Eu³⁺ and low photostability are still problems to be addressed. To overcome such challenges, we synthesized Eu³⁺ tetrakis complexes based on [Q][Eu(tfaa)₄] and [Q][Eu(dbm)₄] (Q1 = C₂₆H₅₆N⁺, Q2 = C₁₉H₄₂N⁺, and Q3 = C₁₇H₃₈N⁺), replacing the water molecules in the tris stoichiometry. The tetrakis β‐diketonates showed desirable thermal stability for SSL and, under excitation at 390 nm, they displayed the characteristic Eu³⁺ emission in the red spectral region. The quantum efficiencies of the dbm complexes achieved values as high as 51%, while the tfaa complexes exhibited lower quantum efficiencies (28–33%), but which were superior to those reported for the tris complexes. The structures were evaluated using the Sparkle/PM7 model and comparing the theoretical and the experimental Judd–Ofelt parameters. [Q1][Eu(dbm)₄] was used to coat a near‐UV light‐emitting diode (LED), producing a red‐emitting LED prototype that featured the characteristic emission spectrum of [Q1][Eu(dbm)₄]. The emission intensity of this prototype decreased only 7% after 30 h, confirming its high photostability, which is a notable result considering Eu³⁺ complexes, making it a potential candidate for SSL.     

Spectral‐converting study of Ba9–3(m+n)/2ErmYbnY2Si6O24 (m = 0.005 – 0.2, n = 0 – 0.3) orthosilicate phosphors

Optical materials composed of Ba_9–3(m+n)/2Er_mYb_nY₂Si₆O₂₄ (m = 0.005–0.2, n = 0–0.3) were prepared using a solid‐state reaction. The X‐ray diffraction patterns of the obtained phosphors were examined to index the peak positions. The photoluminescence (PL) excitation and emission spectra of the Er³⁺‐activated phosphors and the critical emission quenching as a function of Er³⁺ content in the Ba_9–3m/2Er_mY₂Si₆O₂₄ structure were monitored. The spectral conversion properties of Er³⁺ and Er³⁺–Yb³⁺ ions doped in Ba₉Y₂Si₆O₂₄ phosphors were elucidated under diode‐laser irradiation at 980 nm. Up‐conversion emission spectra and the dependence of the emission intensity on pump power for the Ba_8.55Er_0.1Yb_0.2Y₂Si₆O₂₄ phosphor were investigated. The desired up‐conversion of the emitted light, which passed through the green, yellow, orange and red regions of the spectrum, was achieved through the use of appropriate Er³⁺ and/or Yb³⁺ concentrations in the host structure and 980 nm excitation light. The up‐conversion mechanism in the phosphors is described by an energy‐level schematic. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescence properties of a novel red phosphor 6LaPO4–3La3PO7–2La7P3O18:Eu3+

Eu³⁺‐doped 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈ red luminescent phosphors were synthesized by co‐deposition and high‐temperature solid‐state methods and its polyphase state was confirmed by X‐ray diffraction analysis. Transmission electron microscopy showed the grain morphology as a mixture of rods and spheres. Luminescence properties of the phosphor were investigated and its red emission parameters were evaluated as a function of Eu³⁺ concentration (3.00–6.00 mol%). Excitation spectra of 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:Eu³⁺ showed strong absorption bands at 280, 395, and 466 nm, while the luminescence spectra exhibited prominent red emission peak centred at 615 nm (⁵D₀→⁷F₂) in the red region. CIE chromaticity coordinates of the 6LaPO₄–3La₃PO₇–2La₇P₃O₁₈:5%Eu³⁺ phosphor were (0.668, 0.313) in the red region, and defined its potential application as a red phosphor.