Online naphazoline quality control by micellar‐enhanced spectrofluorimetry

The aim of this study was to develop a method for online spectrofluorimetric quality control of naphazoline (NPZ) in pharmaceuticals and raw drugs. A combination of a flow‐injection analysis (FIA) system with micellar‐enhanced fluorescence detection is presented as a powerful alternative for the rapid and sensitive analysis of naphazoline. Since NPZ shows low native fluorescence, the use of an anionic surfactant, such as sodium dodecyl sulphate (SDS), provides a considerable enhancement of fluorescence intensity and the nature of the technique allows a possible and easy adaptation to a FIA system. Using λ_exc = 280 nm and λ_em = 326 nm, a good linear relationship (LOL) was obtained in the range 0.003–10 µg mL^?1 with a detection limit (LOD) of 3 × 10^?4 µg mL^?1 (s/n = 3). Parameters related to the nature of the analytical signal and to the FIA manifold were optimized. Satisfactory recoveries were obtained in the analysis of commercial pharmaceutical formulations. The proposed method is simple, accurate and allows for high‐speed sampling and considerably shorter analysis times. In addition, it requires inexpensive equipment and reagents and has easy operational conditions and no side effects, thus avoiding environmental pollution through toxic waste. Copyright © 2011 John Wiley & Sons, Ltd.     

Development of an offline noncompetitive flow immunoassay for the determination of interleukin-8 in cell samples

A noncompetitive flow immunoassay system (FIA) for the analysis of interleukin-8 (IL-8) in cell samples was developed. Affinity interaction assays based on offline incubation of excess labeled antibodies and antigen (IL-8) were carried out. The residual unbound labeled antibody was trapped in an immunoaffinity column with immobilized IL-8 while the immunocomplex, labeled antibody/IL-8, was detected by a fluorescence detector. Two fluorophores, FLUOS and Cy5.5, were conjugated with IL-8 antibody. Optimization and comparison between the two fluorescent labeled antibodies were performed with regard to pH, antibody concentration, flow rate, injection volume, and association time. Additionally, a horseradish peroxidase enzyme label was used for the conjugation to the anti-IL-8. The enzyme substrate reaction was optimized with respect to temperature and length of the substrate reaction coil. The detection limits were found to be 200 amol using the FLUOS-labeled anti-IL-8 and 1 fmol using the Cy5.5 fluorescence label. The developed FIA technique was applied for the analysis of IL-8 in cell samples. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry was used to identify IL-8 in the cell samples.     

A new on-line micellar-enhanced photochemically-induced fluorescence method for determination of phenylurea herbicide residues in water.

A new flow injection analysis micellar-enhanced photochemically induced fluorescence (FIA-MEPIF) method was developed for the determination of four phenylurea herbicides, including isoproturon, neburon, linuron and diuron. On-line photoconversion under UV irradiation of these herbicides into strongly fluorescent photoproducts was performed in buffered aqueous solutions and in the presence of surfactants [sodium dodecyl sulphate (SDS) or cetyl trimethyl ammonium chloride (CTAC)] at micellar concentrations. The MEPIF and FIA parameters were optimized. The analytical figures of merit for the determination of the four herbicides were satisfactory, with concentration linear dynamic ranges over about one to two orders of magnitude, detection limits of 0.33-0.92 mg[sol ]L and relative standard deviations of 1.3-11%, according to the compound. Application to the analysis of fortified tap water samples yielded good recovery values (91-103%, according to the herbicide). Our results show that the on-line MEPIF-FIA method is simple, versatile, sensitive and can be easily applied to quantify pollutant residues in multiresidue systems.     

On-line concentration of microheterogeneous proteins by capillary electrophoresis using SDS and PEO as additives

In this paper, we describe a method for analyzing large-volume protein samples using capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). To improve the stacking and separation efficiencies of proteins, we added either 0.01% sodium dodecyl sulfate (SDS) or 0.01% poly(ethylene oxide) (PEO) to the Tris-borate solutions (pH 10.0) used to prepare the protein samples. After injection of the large-volume samples (ca. 1.0 microL, 0.1 microM), the proteins migrate against the electroosmotic flow (EOF) and enter the PEO zone; this process causes them to slow and stack at the boundary between the PEO and sample zones. As a result, the limits of detection (LODs) at a signal-to-noise (S/N) of 3 for most proteins are sub-nM to several nM. For instance, the LOD (S/N = 3) for alpha-lactalbumin is 0.48 nM, which is an 84-fold sensitivity enhancement over the traditional method. By applying a short plug of 0.2% SDS prior to sample injection, a greater number of peaks, representing the microheterogeneity of the proteins, were resolved and the stacking efficiency of the proteins increased slightly. This method allowed us to detect 12 peaks when injecting a large volume of sample containing six model proteins (0.1 microM). We also analyzed the microheterogeneities of the proteins by using CE with UV-Vis absorption detection when injecting a large volume of sample containing six model proteins (1.0 microM) in the presence of a 1.0% SDS plug. The practical method is validated by the detection of human serum albumin in a urine sample, obtained from a healthy female, without sample pretreatment; its concentration was 0.18 microM. We further demonstrate the capability of this method to detect low amounts of proteins through the detection of 45 nM hemoglobin after injecting ca. 1.0 microL of ultradilute lysed red blood cells. The experimental results indicate that our proposed method has great potential for use in diagnosis and proteomics applications.     

Offline glucose biomonitoring in yeast culture by polyamidoamine/cysteamine-modified gold electrodes

This article deals with the use of pyranose oxidase (PyOx) and glucose oxidase (GOx) enzymes in amperometric biosensor design and their application in monitoring fermentation processes with the combination of flow injection analysis (FIA). The amperometric studies were carried out at -0.7 V by following the oxygen consumption due to the enzymatic reactions for both batch and FIA modes. Optimization studies (enzyme amounts and pH) and analytical parameters such as linearity, repeatability, effect of interference, storage, and operational stabilities have been studied. Under optimized conditions, for the PyOx-based biosensor, linear graph was obtained from 0.025 to 0.5 mM glucose in phosphate buffer (50 mM) at pH 7.0 with the equation of y = 3.358x + 0.028 and R(2) = 0.998. Linearity was found to be 0.01-1.0 mM in citrate buffer (50 mM and pH 4.0) with the equation of y = 1.539x + 0.181 and R(2) = 0.992 for the GOx biosensor. Finally, these biosensor configurations were further evaluated in a conventional flow injection system. Results from batch experiments provide a guide to design sensitive, stable, and interference-free biosensors for FIA mode. Biosensor stability, dynamic range, and repeatability were also studied in FIA conditions, and the applicability for the determination of glucose in fermentation medium could be successfully demonstrated. The FIA-combined glucose biosensor was used for the offline monitoring of yeast fermentation. The obtained results correlated well with HPLC measurements.     

Determination of propafenone hydrochloride by flow‐injection analysis coupled with resonance light scattering detection

A simple, sensitive and rapid flow injection analysis (FIA) method with resonance light scattering (RLS) was described for the determination of propafenone (PPF). The method was based on the ion‐association reaction of 12‐tungstophosphoric acid (TP) with propafenone. In pH 1.0 acidic medium, TP reacted with PPF to form an ion‐associate complex, which resulted in a significant enhancement of RLS intensity. The maximum scattering peak was located at 340 nm, the RLS intensity was proportional to the concentration of PPF in the range 0.003–9.0 µg/mL, and the detection limit (3σ) of 1.0 ng/mL was obtained at a sampling rate of 60 samples/h. The feasible reaction conditions and FIA parameters for the system were optimized. The method proposed in this paper shows satisfactory reproducibility with a relative standard deviation (RSD) of 2.1% for 10 successive determinations of 2.0 µg/mL PPF. The present method had been successfully applied to the determination of PPF in serum samples and pharmaceutical samples. The results obtained were in agreement with the method used in the Chinese Pharmacopoeia. Copyright © 2008 John Wiley & Sons, Ltd.     

A model system for a fluorometric biosensor using permeabilized Zymomonas mobilis or enzymes with protein confined dinucleotides

Using permeabilized Zymomonas mobilis or glucose-fructose oxidoreductase isolated from this microorganism a model system for biosensors with a protein confined NADP(H) cofactor for the determination of glucose, fructose, gluconolactone, and sorbitol was developed. Either permeabilized microorganisms containing the oxidoreductase or the pure enzyme were confined via membrane separation in a small measuring chamber, that was integrated into a flow injection analysis system (FIA). The measuring principle was the monitoring of the NAD(P)H fluorescence, excited at 360 nm and measured at 450 nm. NADP(H), which is confined in the protein complex, was oxidized or reduced during the enzymatic reactions and the changes in the fluorescence intensity were related to the substrate concentration. The sensitivity of the system covered a range from 0.001 to 100 g/L of the analyte depending on substrate and operating conditions. The applicability of this model system for bioprocess monitoring was proved using samples from a Pseudomonas pseudoflava cultivation. (c) 1993 John Wiley & Sons, Inc.     

Simultaneous determination of levofloxacin, gatifloxacin and moxifloxacin in serum by liquid chromatography with column switching

Liquid chromatography with a column-switching technique was developed for simultaneous direct quantification of levofloxacin, gatifloxacin and moxifloxacin in human serum. Serum samples were injected on a LiChroCART 4-4 pre-column (PC) filled with a LiChrospher 100 RP-18, 5 microm where fluoroquinolones (FQs) were purified and concentrated. The FQs were back-flushed from the PC and then separated on a Supelcosil ABZ+ Plus (150 mm x 4.6 mm i.d.) analytical column with a mobile phase containing 10 mM phosphate buffer (pH 2.5), acetonitrile (88:12, v/v) and 2mM tetrabutyl ammonium bromide. The effects of ion-pair reagents, buffer type, pH and acetonitrile concentrations in the mobile phase on the separation of the three FQs were investigated. Fluorescence detection provided sufficient sensitivity to achieve a quantification limit of 125 ng/ml for levofloxacin and moxifloxacin; 162.5 ng/ml for gatifloxacin with a 5 microl sample size. The on-line process of extraction avoids time-consuming treatment of the samples before injection and run time is shortened. The recovery, selectivity, linearity, precision and accuracy of the method are convenient for pharmacokinetic studies or routine assays.     

Gradient reversed-phase liquid chromatography coupled on-line to receptor-affinity detection based on the urokinase receptor

A postcolumn receptor-affinity detection (RAD) was developed for the detection of urokinase and cross-reactive compounds. The analytical method consisted of gradient reversed-phase HPLC coupled on-line to a RAD system based on fluorescein-labelled urokinase receptor (fluorescein–uPAR) as reagent. Fluorescein–uPAR was added continuously to the HPLC effluent to react with analytes eluting from the LC column. Unreacted fluorescein–uPAR was removed by a short affinity column packed with an immobilised urokinase support. The analyte-bound fluorescein–uPAR fraction passes the affinity column unretained and was detected downstream by means of a fluorescence detector. An absolute detection limit of 40 fmol urokinase was obtained in the flow injection mode. In the gradient HPLC–RAD system a detection limit of 40 nM (20-μl injection, absolute amount, 800 fmol) was obtained. The present method allowed the identification of active breakdown products of urokinase both in standard samples and biological matrices.     

Fast and low sample consuming quantification of manganese in cell nutrient solutions by flow injection ICP-QMS

Inductively coupled plasma mass spectrometry with quadrupole mass analyzers (ICP-QMS) is one of the most powerful analytical techniques due to its superb limits of detection and the fast, quasi simultaneous quantification of different elements in one single run. However, sample consumption is typically too large for use in biological studies and spectral as well as non-spectral interferences are often hard to compensate for. Hence, a flow injection (FIA) approach for quantification of manganese (Mn) in biologically relevant cell nutrient solutions was developed, extending the sample throughput and versatility of a common system. The investigated cell nutrient solutions are, for example, used in in vitro models of the blood-brain and the blood-liquor barrier and represent a complex matrix, while Mn is of interest due to its potential neurotoxic effects, but shows several challenges in ICP-QMS analysis. Therefore, the aim of the study was not only to devise a system as simple as possible, but also to have a tool allowing the measurement of several hundreds of samples within a short period of time. Furthermore, statistical data treatment was used to evaluate the need for matrix matching and internal standardization for the four different solutions. The calculated lowest detection limits (LODs) were in the low μg L(-1) range due to successful use of a collision/reaction cell, while only 11 μL of sample volume was needed per injection by means of a segment sample loop filling. The analysis of a certified reference material further confirmed the suitability of this approach in biological studies.     

Bienzymatic amperometric sensor for protein assay in milk

A new bienzymatic amperometric sensor is proposed for the assay of the protein content of milk. The sensor is based on two enzymes: carboxypeptidase A and L-amino acid oxidase. The response characteristics obtained for this sensor (detection limit of 1.5 micromol/L, linear concentration range between 1.8 and 2.8 micromol/L), as well as high selectivity over possible interferences from milk, made it applicable as a detector in flow injection analysis (FIA). The response characteristics obtained in the non-equilibrium conditions (FIA system) are: detection limit of 1.5 micromol/L and linear concentration range between 2 and 3.5 micromol/L. Without FIA, the average recovery of proteins from milk and milk products is 99.06 +/- 0.07% and, by utilization of FIA, it increased to 99.73 +/- 0.03. The sensor proved a good reliability for the assay of proteins in milk and milk products.     

Determination of l-glutamate in various commercial soy sauce products using flow injection analysis with a modified electrode

A flow injection analysis (FIA) system with a modified electrode has been developed and optimized for determination of l-glutamate using l-glutamate oxidase (GLOD) (EC 1.4.3.11). GLOD was immobilized on controlled-pore glass using glutaraldehyde. The optimal potential applied on the working electrode was +700mV against a platinum (Pt) reference electrode. The optimal pH and flow rate of the carrier buffer were 7.4 and 1.5ml/min, respectively. A modified electrode was integrated into the FIA system in order to eliminate electroactive interference and it was used to determine l-glutamate in 39 samples of Thai commercial soy sauce products. The results obtained were compared with those obtained from enzymatic assay using glutamate dehydrogenase and those from a chromatographic assay using an amino acid analyser. Good correlations were observed amongst these methods. The results indicated that use of an FIA system with a modified electrode was able to eliminate electroactive interference and was applicable to the determination of l-glutamate in food samples. The modified FIA was faster and simpler than the more common methods of enzymatic and chromatographic analysis.     

Rapid determination of gatifloxacin in biological samples and pharmaceutical products using europium‐sensitized fluorescence spectrophotometry

A europium‐sensitized fluorescence spectrophotometry method using an anionic surfactant, sodium dodecyl benzene sulphonate (SDBS), was developed for the determination of gatifloxacin (GFLX). The GFLX–Eu³⁺–SDBS system was studied and it was found that SDBS significantly enhanced the fluorescence intensity of the GFLX–Eu³⁺ complex (about 25‐fold). The optimal experimental conditions were determined as follows: excitation and emission wavelengths of 338 and 617 nm, pH 7.5, 3.0 × 10^–6 mol/L europium(III), and 5.0 × 10^–5 mol/L SDBS. The enhanced fluorescence intensity of the system (ΔI_f) showed a good linear relationship with the concentration of GFLX over the range 1.0 × 10^–8–8.0 × 10^–7 mol/L with a correlation coefficient of 0.9990. The detection limit (S:N = 3) was determined as 1.0 × 10^–9 mol/L. This method has been successfully applied for the determination of GFLX in pharmaceuticals and human urine/serum samples. Compared with most other methods reported, the rapid and simple procedure proposed here offered higher sensitivity, wider linear range and good stability. The luminescence mechanism of the system is also discussed in detail. Copyright © 2008 John Wiley & Sons, Ltd.     

微流控芯片电泳分离血清高密度脂蛋白亚类的研究

描述了一种微流控芯片电泳快速分离血清高密度脂蛋白(high density lipoprotein,HDL)亚类的方法.利用自制的微流控芯片,结合激光诱导荧光检测系统,40mmol/L Tricine、50mmol/L甲基葡胺(MEG)、0.2mmol/LSDS(pH8.5)为样品缓冲液,40mmol/L Tricine、50mmol/LMEG、0.01mmol/L SDS(pH8.5)为分离缓冲液,4min内HDL3和HDL2两种亚类得到基线分离.该法操作过程简单,重复性较佳,测试费用低廉,在临床HDL亚类的检测中具有较好的应用前景.     

An adaptable HPLC method for the analysis of frequently used antibiotics in ocular samples

Four different antibiotics, delivered individually to rabbit eyes via hydrophilic intraocular lenses soaked in the drug solution prior to implantation, were measured in aqueous and vitreous humor samples from the eyes. To meet this analytical need, we developed a sensitive, high performance liquid chromatographic (HPLC) method for measuring the concentrations of moxifloxacin, gatifloxacin, linezolid, and cefuroxime in the ocular tissue. Separations were carried out on a LichroSpher RP-18 column, maintained at room temperature. The fluoroquinolones were eluted with a mobile phase consisting of 20% acetonitrile, in 0.1% trifluoroacetic acid (pH 3.0) with 30 mM tetrabutylammonium chloride. Linezolid and cefuroxime were eluted with 25% acetonitrile in 25 mM Na acetate buffer, pH 5.0. All elutions were isocratic. With ultraviolet detection, the lower limit of quantitation (LLOQ) for these compounds approached 1 ng (on-column injection). By using fluorescence detection, the LLOQ for the fluoroquinolones improved to 200 pg. The overall accuracy of the method was ≥90%. With minor modifications, the method was optimized for each of the agents, and the resulting analytical sensitivity made the method suitable for clinical investigations of the ocular penetration of these drugs.     

Benzene analysis in workplace air using an FIA-based bacterial biosensor

A bacterial biosensor based on flow injection analysis (FIA) has been developed for the determination of benzene in workplace air samples. Benzene can be used by the bacteria Pseudomonas putida ML2 as a sole carbon source, and its aerobic degradation can be measured using a dissolved oxygen electrode. The bacterial cells were immobilised between two cellulose acetate membranes and fixed onto a Clark dissolved oxygen probe, which was inserted into a custom-made flow cell. The applicability of the biosensor for the analysis of air samples containing benzene was investigated. Air samples were collected from a controlled exposure room using charcoal adsorption tubes, and benzene extracted with solvent desorption using dimethylformamide (DMF). The biosensor displayed a linear detection range between 0.025 and 0.15 mM benzene based on standard solutions containing a maximum of 2% DMF, with a response time of 6 min. This linear detection range allows the analysis of air containing between 3 and 16 ppm benzene based on a 60-min sampling period. DMF proved to be compatible for use with the biosensor, causing minimal interference with the sensor response and causing no toxic effects on the bacterial cells. The FIA system was easily transported to an in situ location, and a correlation was obtained between the biosensor and gas chromatography (GC) results for the preliminary air samples investigated. Moreover, the biosensor displayed no interference to other benzene related compounds in the BTEX range. The results from this work have shown that the biosensor has potential applications for the analysis of benzene in workplace air samples, with the added advantages over the conventional GC methods of low operation costs, ease of use, and portability for in situ measurements.     

Biosensor based on acetylcholinesterase immobilized onto layered double hydroxides for flow injection/amperometric detection of organophosphate pesticides

We developed a highly sensitive flow injection/amperometric biosensor for the detection of organophosphate pesticides (OPs) using layered double hydroxides (LDHs) as the immobilization matrix of acetylcholinesterase (AChE). LDHs provided a biocompatible microenvironment to keep the bioactivity of AChE, due to the intrinsic properties of LDHs (such as a regular structure, good mechanical, chemical and thermal stabilities, and swelling properties). By integrating the flow injection analysis (FIA) with amperometric detection, the resulting AChE-LDHs modified electrode greatly catalyzed the oxidation of the enzymatically generated thiocholine product, and facilitated the detection automation, thus increasing the detection sensitivity. The analytical conditions for the FIA/amperometric detection of OPs were optimized by using methyl parathion (MP) as a model. The inhibition of MP was proportional to its concentration ranging from 0.005 to 0.3μgmL(-1) and 0.3 to 4.0μgmL(-1) with a detection limit 0.6ngmL(-1) (S/N=3). The developed biosensor exhibited good reproducibility and acceptable stability.     

Spectrofluorimetric analysis of gemifloxacin mesylate in pharmaceutical formulations

A simple, rapid and highly sensitive spectrofluorimetric method was developed for determination of gemifloxacin mesylate (GFX) in tablets. The method is based on measuring the native fluorescence of GFX in isopropanol at 400 nm after excitation at 272 nm. The fluorescence–concentration plot was rectilinear over the range of 0.01–0.50 µg/mL with a lower detection limit of 1.19 ng/mL and quantification limit of 3.6 ng/mL. The method was fully validated and successfully applied to the determination of GFX tablets with an average percentage recovery of 99.65 ± 0.532. The method was extended to the stability study of GFX. The drug was exposed to acidic, alkaline, oxidative and photolytic degradation according to International Conference on Harmonization guidelines. The rate of GFX degradation was found at its highest in acidic conditions, and in its lowest in the neutral one. However, it was stable under dry heat and photolytic degradation conditions. Copyright © 2013 John Wiley & Sons, Ltd.     

Monitoring of chemical and enzymatic hydrolysis of water-soluble proteins using flow-injection analysis with fluorescence detection and an aqueous eluant containing 2-p-toluidinylnaphthalene-6-sulfonate as the fluorescent probe

The exposed hydrophobicity of proteins, which is due to the hydrophobic regions located on their surfaces, enhances the fluorescence intensity of the probe 2-p-toluidinylnaphthalene-6-sulfonate (2,6-TNS) by the formation of a complex. During the hydrolysis of a protein, the average exposed hydrophobicity of the substrate continuously changes with incubation time, and these changes are immediately reflected by a corresponding change in the fluorescence intensity of the 2,6-TNS/substrate complex. Therefore, 2,6-TNS seems to be a good probe to monitor the course of the depolymerization processes of proteins. In this work, bovine serum albumin and alpha-casein have been hydrolyzed both chemically and enzymatically, and the course of the reactions is monitored by using flow-injection analysis (FIA) with fluorescence detection and a buffered aqueous eluant containing 2,6-TNS as the fluorescent probe. Results indicate that the time evolution of the fluorescence intensity of the 2,6-TNS/substrate complex can be correlated with the initial concentration of the parent protein, in mass per unit volume, the hydrolytic activity added, and the time evolution of the mean chain length of the substrate. In addition, because the time elapsed between injection of the sample into the FIA system and measurement of the corresponding fluorescence intensity is only a few seconds, this methodology could be a useful tool for on-line monitoring of processes for the production of protein hydrolysates.     

Development of a gas diffusion FIA system for on-line monitoring of ethanol.

A flow injection analysis (FIA) system for on-line monitoring of ethanol in cultivation media was developed, which combines the selectivity of a gas diffusion membrane with the substrate specificity of immobilized alcohol oxidase (AOD). The optimization of membrane material and immobilized enzyme was performed using different FIA modes such as dual detection and dual injection. A simple modification of a polypropylene membrane with silicone enabled a very flexible adjustment of the linear range for alcohol detection between 0.0006 and 60% (v v-1). The ethanol content of cultivation media could be determined continuously with a frequency of 120-180 samples per hour with an excellent correlation to gas chromatographic analysis (r = 0.9996). The relative standard deviation for 10 successive injections was lower than 0.5%.