Synthesis and characterization of pure and Li+ activated Alq3 complexes for green and blue organic light emitting diodes and display devices

Pure and Li⁺‐doped Alq₃ complexes were synthesized by simple precipitation method at room temperature, maintaining the stoichiometric ratio. These complexes were characterized by X‐ray diffraction, ultraviolet‐visible absorption and Fourier transform infrared and photoluminescence (PL) spectra. X‐ray diffraction analysis reveals the crystalline nature of the synthesized complexes, while Fourier transform infrared spectroscopy confirm the molecular structure, the completion of quinoline ring formation and presence of quinoline structure in the metal complex. Ultraviolet‐visible and PL spectra revealed that Li⁺ activated Alq₃ complexes exhibit the highest intensity in comparison to pure Alq₃ phosphor. Thus, Li⁺ enhances PL emission intensity when doped into Alq₃ phosphor. The excitation spectra lie in the range of 383–456 nm. All the synthesized complexes other than Liq give green emission, while Liq gives blue emission with enhanced intensity. Thus, he synthesized phosphors are the best suitable candidates for green‐ and blue‐emitting organic light emitting diode, PL liquid‐crystal display and solid‐state lighting applications. Copyright © 2013 John Wiley & Sons, Ltd.     

Optical properties and energy transfer of Eu2+/Ce3+ co‐activated Na3Ca6(PO4)5 phosphor

Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ phosphors were prepared using a combustion‐assisted synthesis method. X‐Ray powder diffraction (XRD) analysis confirmed the formation of a Na₃Ca₆(PO₄)₅ crystal phase. Na₃Ca₆(PO₄)₅:Eu²⁺ phosphors have an efficient bluish‐green emission band that peaks at 489 nm, whereas Ce³⁺‐doped Na₃Ca₆(PO₄)₅ showed a bright emission band at 391 nm. Analysis of the experimental results suggests that enhancement of the Eu²⁺ emission intensity in co‐doped Na₃Ca₆(PO₄)₅:Eu²⁺,Ce³⁺ phosphors is due to a resonance‐type energy transfer from Ce³⁺ to Eu²⁺ ions, which is predominantly governed by an exchange interaction mechanism. These results indicate that Ce³⁺/Eu²⁺ co‐doped Na₃Ca₆(PO₄)₅ is potentially useful as a highly efficient, bluish‐green emitting, UV‐convertible phosphor for white‐light‐emitting diodes. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and luminescent properties of novel BaGd2O4:Eu3+ scintillating phosphor

BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors were synthesized at 1300°C in air by conventional solid‐state reaction method. Phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence excitation (PLE) spectra, photoluminescence (PL) spectra and thermoluminescence (TL) spectra. Optimal PL intensity for BaGd_2‐xO₄:xEu³⁺ and Ba_1‐yGd_1.79‐2yEu_0.21Na_3yO₄ phosphors at 276 nm excitation were found to be x = 0.24 and y = 0.125, respectively. The PL intensity of Eu³⁺ emission could only be enhanced by 1.3 times with incorporation of Na⁺ into the BaGd₂O₄ host. Enhanced luminescence was attributed to the flux effect of Na⁺ ions. However, when BaGd₂O₄:Eu³⁺ phosphors were codoped with Na⁺ ions, the induced defects confirmed by TL spectra impaired the emission intensity of Eu³⁺ ions. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoluminescence,cathodoluminescence and thermal stability of Sm3+‐activated Sr3La(VO4)3 red‐emitting phosphors

A series of Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors were synthesized by a facile sol‐gel method. X‐ray diffraction patterns and photoluminescence (PL)/cathodoluminescence (CL) spectra as well as PL decay curves were employed to characterize the obtained samples. Upon 402 nm light excitation, the characteristic emissions of Sm³⁺ ions corresponding to ⁴G_5/2→⁶H_J transitions were observed in all the as‐prepared products. The PL emission intensity was increased with increase in Sm³⁺ ion concentration, while concentration quenching occurred when the doping concentration was over 4 mol%. The non‐radiative energy transfer mechanism for concentration quenching of Sm³⁺ ions was dominated by dipole–dipole interaction and the critical distance was around 21.59 Å. Furthermore, temperature‐dependent PL emission spectra revealed that the obtained phosphors possessed good thermal stability with an activation energy of 0.19 eV. In addition, the CL spectra of the samples were almost the same as the PL spectra, and the CL emission intensity showed a tendency to increase with increase in accelerating voltage and filament current. These results suggest that the Sm³⁺‐activated Sr₃La(VO₄)₃ phosphors with good color coordinates, high color purity and superior thermal stability may be a potential candidate for applications in white light‐emitting diodes and field‐emission displays as red‐emitting phosphors.     

Influence of Tl+ activator ions on the luminescence characteristics of KCl0.5Br0.5:Eu2+ powder phosphors

Photoluminescence (PL) of thallium co‐doped with KCl_0.5Br_0.5:Eu²⁺ powder phosphors display emission bands at 320 and 370 nm attributable to centres involving Tl⁺ ions in addition to characteristic Eu²⁺ emission around 420 nm. Additional PL excitation and emission bandS observed around 260 and 380 nm, respectively, were observed in the double‐doped KCl_0.5Br_0.5:Eu²⁺, Tl⁺ powder phosphors and are attributed to complex centres involving Tl⁺ and Eu²⁺ ions. The enhancement observed in the intensity of Eu²⁺ emission around 420 nm with the addition of TlBr in KCl_0.5Br_0.5:Eu²⁺ powder phosphors is attributed to the energy transfer from Tl⁺ → Eu²⁺ ions. Photostimulated luminescence (PSL) studies of γ‐irradiated KCl_0.5Br_0.5:Eu²⁺, Tl⁺ mixed phosphors are reported and a tentative PSL mechanism in the phosphors has been suggested. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of temperature on intense green emitting Na2Ca(PO4)F:Mn2+ phosphor

An intense green luminescent Na₂Ca(PO₄)F:Mn²⁺ phosphor has been prepared at high temperature by reduction treatment in a charcoal environment. The emission band of Mn²⁺ was obtained at around 522 nm (green) under 259 nm excitation. Enhancement in emission intensity arising from the thermal treatment is reported. The intense emission of the spectrum was assigned to electronic transitions ⁴T₁ → ⁶A₁ of Mn²⁺ ions. Intense PL emission suggested that temperature employed plays an important role in the present matrix. X‐ray diffraction pattern, photoluminescence and morphology by SEM of the host lattice of phosphors at different temperatures have been reported in this paper. The results obtained show that the present phosphor has potential for application in green emitting phosphors for the lamp industry. Copyright © 2010 John Wiley & Sons, Ltd.     

Microwave‐assisted sintering synthesis of greenish‐yellow emitting Sr2SiO4:Eu2+ phosphors

Europium ion (Eu²⁺) doped Sr₂SiO₄ phosphors with greenish‐yellow emission were synthesized using microwave‐assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr₂SiO₄:Eu²⁺ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f‐4d allowed transition of the Eu²⁺ ions. Under an excitation at 361 nm, the Sr₂SiO₄:Eu²⁺ phosphor exhibited a greenish‐yellow emission peak at 541 nm with an International‐Commission‐on‐Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave‐assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.     

Optical characterization and the energy level scheme for Ce3+‐doped BaY2Si3O10 blue‐emitting phosphor

A series of Ce³⁺‐activated blue‐emitting phosphors BaY₂Si₃O₁₀ (BYSO) was designed and synthesized by a conventional solid‐state method. Upon ultraviolet light (250–370 nm) excitation, the obtained phosphors showed an intense blue emission band centered at 400–427 nm depending on doping concentration, and corresponding to the 5d→4f transition of Ce³⁺. The effects of doping concentration on crystal structure, emitting color, photoluminescence and photoluminescence excitation spectra, as well as the concentration quenching mechanism were studied in detail. The optimal doping concentration of Ce³⁺ in this phosphor was demonstrated to be about 0.75% and the concentration quenching mechanism can be ascribed to electric dipole–dipole interactions with a critical distance of ~38 Å. These fine luminescence properties indicate that BYSO:Ce³⁺ may be a potential blue phosphor for full‐color ultra‐violet (UV) white light emitting diodes (WLEDs).     

Nd3+‐Yb3+/Nd3+‐Yb3+‐Li+ co‐doped Gd2O3 phosphors for up and down conversion luminescence

Frequency up‐conversion (UC) emission from the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped gadolinium oxide (Gd₂O₃) phosphors prepared by the solution combustion technique in the visible range have been studied by using 980 nm near infrared (NIR) laser diode excitation. The crystalline structure and formation of the cubic phase has been confirmed with the help of X‐ray diffraction (XRD) studies. XRD peak shifts have been found towards the lower diffraction angle side in the case of the Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. Surface morphology and particle size information have been observed by using field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) analysis. Down‐conversion emission study under 351 nm excitation in the visible region for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors has been performed. The UC emission bands lying in the green and red region arising from the Nd³⁺ ions have been enhanced by ~260 times, ~113 times due to incorporation of Li⁺ ions in the Nd³⁺‐Yb³⁺ co‐doped phosphors. Photometric characterization has been done for the Nd³⁺‐Yb³⁺/Nd³⁺‐Yb³⁺‐Li⁺ co‐doped phosphors. The present study suggests the capability of the synthesized phosphors in near‐infrared (NIR) to visible upconverter and luminescent device applications.     

Tunable emission,energy transfer and charge compensation in SrMoO4:Sm3+,Tb3+,Na+ phosphor

A series of SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ phosphors was synthesized using a high‐temperature solid‐state reaction method in air. On excitation at 290 nm, SrMoO₄:Sm³⁺,Tb³⁺ phosphor emitted light that varied systematically from green to reddish‐orange on changing the Sm³⁺ and Tb³⁺ ion concentrations. The emission intensities of SrMoO₄:Sm³⁺ and SrMoO₄:Sm³⁺,Tb³⁺ phosphors were increased two to four times due to charge compensation when Na⁺ was added as a charge compensator. The luminescence mechanism and energy transfer could be explained using energy‐level diagrams of the MoO₄^2– group, Sm³⁺ and Tb³⁺ ions. SrMoO₄:Sm³⁺,Tb³⁺,Na⁺ could be used as reddish‐orange phosphor in white light‐emitting diodes (LEDs) based on an ~ 405 nm near‐UV LED chip. This research is helpful in adjusting and improving the luminescence properties of other phosphors. Copyright © 2015 John Wiley & Sons, Ltd.     

Luminescent properties and energy transfer in the green phosphors LaBSiO5:Tb3+,Ce3+

LaBSiO₅ phosphors doped with Ce³⁺ and Tb³⁺ were synthesized using the conventional solid‐state method at 1100 °C. The phase purity and luminescent properties of these phosphors are investigated. LaBSiO₅:Tb³⁺ phosphors show intense green emission, and LaBSiO₅ phosphors doped with Ce³⁺ show blue–violet emission under UV light excitation. LaBSiO₅ phosphors co‐doped with Ce³⁺ and Tb³⁺ exhibit blue–violet and green emission under excitation by UV light. The blue–violet emission is due to the 5d–4f transition of Ce³⁺ and the green emission is ascribed to the ⁵D₄ → ⁷ F₅ transition of Tb³⁺. The spectral overlap between the excitation band of Tb³⁺ and the emission band of Ce³⁺ supports the occurrence of energy transfer from Ce³⁺ to Tb³⁺, and the energy transfer process was investigated. Copyright © 2014 John Wiley & Sons, Ltd.     

Enhanced luminescence and white light emission from Eu3+‐co‐doped K3Ca2(SO4)3Cl:Dy3+ phosphor with near visible ultraviolet excitation for white LEDs

The luminescent properties of europium (Eu)‐ and dysprosium (Dy)‐co‐doped K₃Ca₂(SO₄)₃Cl halosulfate phosphors were analyzed. This paper reports the photoluminescence (PL) properties of K₃Ca₂(SO₄)₃Cl microphosphor doped with Eu and Dy and synthesized using a cost‐effective wet chemical method. The phosphors were characterized by X‐ray diffraction and scanning electron microscopy. The CIE coordinates were calculated to display the color of the phosphor. PL emission of the prepared samples show peaks at 484 nm (blue), 575 nm (yellow), 594 nm (orange) and 617 nm (red). The emission color of the Eu,Dy‐co‐doped K₃Ca₂(SO₄)₃Cl halophosphor depends on the doping concentration and excitation wavelength. The addition of Eu in K₃Ca₂(SO₄)₃Cl:Dy greatly enhances the intensity of the blue and yellow peaks, which corresponds to the ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of Dy³⁺ ions (under 351 nm excitation). The Eu³⁺/Dy³⁺ co‐doping also produces white light emission for 1 mol% of Eu³⁺, 1 mol% of Dy³⁺ in the K₃Ca₂(SO₄)₃Cl lattice under 396 nm excitation, for which the calculated chromaticity coordinates are (0.35, 0.31). Thus, K₃Ca₂(SO₄)₃Cl co‐doped with Eu/Dy is a suitable candidate for NUV based white light‐emitting phosphors technology. Copyright © 2014 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence properties of Eu2+ doped and Eu2+,Dy3+ co‐doped Ba2MgSi2O7 phosphors

In this work, we report the preparation, characterization, comparison and luminescence mechanisms of Eu²⁺‐doped and Eu²⁺,Dy³⁺‐co‐doped Ba₂MgSi₂O₇ (BMSO) phosphors. Prepared phosphors were synthesized via a high temperature solid‐state reaction method. All prepared phosphors appeared white. The phase structure, particle size, and elemental analysis were analyzed using X‐ray diffraction (XRD), transmission electron microscopy (TEM) and energy‐dispersive X‐ray (EDX) analysis. The luminescence properties of the phosphors were investigated by thermoluminescence (TL) and photoluminescence (PL). The PL excitation and emission spectra of Ba₂MgSi₂O₇:Eu²⁺ showed the peak to be around 381 nm and 490 nm respectively. The PL excitation spectrum of Ba₂MgSi₂O₇:Eu²⁺Dy³⁺ showed the peak to be around 341 nm and 388 nm, and the emission spectrum had a broad band around 488 nm. These emissions originated from the 4f⁶ 5d¹ to 4f⁷ transition of Eu²⁺. TL analysis revealed that the maximum TL intensity was found at 5 mol% of Eu²⁺ doping in Ba₂MgSi₂O₇ phosphors after 15 min of ultraviolet (UV) light exposure. TL intensity was increased when Dy³⁺ ions were co‐doped in Ba₂MgSi₂O₇:Eu²⁺ and maximum TL intensity was observed for 2 mol% of Dy³⁺. TL emission spectra of Ba_1.95MgSi₂O₇:0.05Eu²⁺ and Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors were found at 500 nm. TL intensity increased with UV exposure time up to 15 min, then decreased for the higher UV radiation dose for both Eu doping and Eu,Dy co‐doping. The trap depths were calculated to be 0.54 eV for Ba_1.95MgSi₂O₇:0.05Eu²⁺ and 0.54 eV and 0.75 eV for Ba_1.93MgSi₂O₇:0.05Eu²⁺,0.02Dy³⁺ phosphors. It was observed that co‐doping with small amounts of Dy³⁺ enhanced the thermoluminescence properties of Ba₂MgSi₂O₇ phosphor. Copyright © 2016 John Wiley & Sons, Ltd. [Correction added on 5 April 2016, after first online publication: The following parts of the abstract have been edited for consistency. '4f65d1' has been corrected to '4f⁶ 5d¹', '4f7' has been corrected to '4f⁷', 'Ba1.95' has been corrected to 'Ba_1.95' and 'Ba1.93' has been corrected to 'Ba_1.93' respectively.]     

Tunable luminescence properties and energy transfer in LaAl11O18:Eu,Tb phosphor

Eu²⁺ and Tb³⁺ singly doped and co‐doped LaAl₁₁O₁₈ phosphors were prepared by a combustion method using urea as a fuel. The phase structure and photoluminescence (PL) properties of the prepared phosphors were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), and photoluminescence excitation and emission spectra. When the content of Eu²⁺ was fixed at 0.01, the emission chromaticity coordinates could be adjusted from blue to green region by tuning the contents of Tb³⁺ ions from 0.01 to 0.03 through an energy transfer (ET) process. The fluorescence data collected from the samples with different contents of Tb³⁺ into LaAl₁₁O₁₈: Eu, show the enhanced green emission at 545 nm associated with ⁵D₄ –⁷F₅ transitions of Tb³⁺. The enhancement was attributed to ET from Eu²⁺ to Tb³⁺, and therefore Eu²⁺ ion acts as a sensitizer (an energy donor) while Tb³⁺ ion as an activator. The ET from Eu²⁺ to Tb³⁺ is performed through dipole–dipole interaction. The ET efficiency and critical distance were also calculated. The present Eu²⁺–Tb³⁺ co‐doped LaAl₁₁O₁₈ phosphor will have potential application for UV convertible white light‐emitting diodes. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence properties of LiBaPO4:M3+ phosphor for near‐UV light‐emitting diode (M = Eu and Dy)

A novel phosphor LiBaPO₄ doped with rare earths Eu and Dy prepared by high temperature solid‐state reaction method is reported. The phosphors were characterized by X‐ray powder diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence (PL). The emission and excitation spectra of these materials were measured at room temperature with a spectrofluorophotometer. The excitation spectra of LiBaPO₄:Eu³⁺ phosphor can be efficiently excited by 394 nm, which is matched well with the emission wavelength of near‐UV light‐emitting diode (LED) chip. PL properties of Eu³⁺‐doped LiBaPO₄ exhibited the characteristic red emission coming from ⁵D₀ → ⁷ F₁ (593 nm) and ⁵D₀ → ⁷ F₂ (617 nm) electronic transitions with color co‐ordinations of (0.680, 0.315). The results demonstrated that LiBaPO₄:Eu³⁺ is a potential red‐emitting phosphor for near‐UV LEDs. Emission spectra of LiBaPO₄:Dy³⁺ phosphors showed efficient blue (481 nm) and yellow (574 nm) bands, which originated from ⁴ F_9/2 → ⁶H_15/2 and ⁴ F_9/2 → ⁶H_13/2 transitions of the Dy³⁺ ion, respectively. The 574 nm line is more intense than the 481 nm lines, which indicates that the site Dy³⁺ is located with low symmetry. This article summarizes fundamentals and possible applications of optically useful inorganic phosphates with visible photoluminescence of Eu³⁺ and Dy³⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Dy3+‐, Sm3+‐, Ce3+‐ and Tb3+‐activated optical properties of microcrystalline BaMgP2O7 phosphors

Photoluminescence (PL) and thermoluminescence (TL) properties of rare earth (RE) ion (RE = Dy³⁺, Sm³⁺, Ce³⁺, Tb³⁺) activated microcrystalline BaMgP₂O₇ phosphors are presented in this work. Non‐doped and doped samples of BaMgP₂O₇ were prepared using a solid state diffusion method and characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM), PL and TL. The XRD measurement confirmed the phase purity of the BaMgP₂O₇ host matrix. The average particle size was found through SEM measurement to be around 2 μm. All activators using the PL technique displayed characteristic excitation and emission spectra that corresponded to their typical f → f and f → d transitions respectively. Thermoluminescence measurements showed that BaMgP₂O₇:RE (RE = Dy³⁺, Sm³⁺, Tb³⁺, Ce³⁺) and co‐doped BaMgP₂O₇:Ce³⁺,Tb³⁺ phosphors have also TL behaviour.     

Synthesis and optical properties of Eu3+‐substituted glaserite‐type orthovanadates CsK2Y[VO4]2

A new Eu³⁺‐substituted CsK₂Y[VO₄]₂ glaserite‐type orthovanadate phosphor was synthesized by the conventional high temperature solid‐state reaction method. The phase purity was confirmed by powder X‐ray diffraction study and it reveals that all the compositions crystallize in the hexagonal structure. The morphology and elemental composition were measured by FE‐SEM with Energy Dispersive Analysis Of X Rays (EDAX). The band gap is determined by diffuse reflectance spectra. The self‐activated luminescence of the host and Eu³⁺‐substituted luminescence behaviours were studied in detail by photoluminescence spectra. The host CsK₂Y[VO₄]₂ shows green emission, whereas the Eu³⁺‐substituted compositions show red emission. Effect of Eu³⁺ concentrations on the photoluminescence behaviour were also been studied. The Eu³⁺‐doped samples show not only several sharp emission lines but also a broad emission band due to presence of the [VO₄]^3? in the host, which clearly indicates that there is incomplete energy transfer from (VO₄) charge transfer band to Eu³⁺_. The life time of the phosphors also been studied. The Commission Internationale de l'Eclairage (CIE) chromaticity colour coordinates were calculated and it is very much closer to the National Television Standard Committee (NTSC) standards. These investigations evidently reveal that the self‐activated and Eu³⁺‐activated phosphors show a great potential applications as a red phosphor for solid‐state lighting includes white light‐emitting diodes (wLEDs).     

Eu2+ luminescence in SrCaP2O7 pyrophosphate phosphor

A series of Eu²⁺ activated SrCaP₂O₇ pyrophosphate phosphors were synthesized by the modified solid‐state reaction method. The X‐ray diffraction (XRD) and photoluminescence (PL) properties of these phosphors were investigated at room temperature. The excitation spectra indicate that these phosphors can be effectively excited by Hg‐free excitation. The emission spectra exhibit strong blue performance, which is due to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The Fourier transform infrared spectrum at room temperature was investigated and surface morphology has been studied by scanning electron microscope. The prepared phosphor exhibited intense blue emission at the 427 nm owing to Eu²⁺ ion by Hg‐free excitation at 330 nm, that is, solid‐state lighting excitation. Hence, the availability of such a phosphor will significantly help in the growth of blue‐emitting solid‐state lighting applications. Copyright © 2012 John Wiley & Sons, Ltd.     

Photoluminescence of Alq3‐ and Tb‐activated aluminium–tris(8‐hydroxyquinoline) complex for blue chip‐excited OLEDs

The tris(8‐hydroxyquinoline)–aluminium complex is the most important and widely studied as electron transporting and green light emitting material. Alq₃ and Tb_xAl_(1‐x)q₃ have been synthesized (where x = 0.1, 0.3, 0.5, 0.7 and 0.9) and blended films of Alq₃ and Tb_xAl_(1‐x)q₃ with PMMA and PS at different percentage weight (wt%) concentrations (e.g., 0.1, 1, 5, 10, 25 and 50 wt%) have been prepared. The synthesized materials and their blended thin films have been characterized by a photoluminescence (PL) technique; the synthesis and PL characterization are reported in this paper. The synthesized metal complex shows bright emission of green light with blue light excitation (440 nm) and the prepared Tb_xAl_(1‐x)q₃ phosphor may be applicable in blue chip‐excited OLEDs for the newly developed wallpaper lighting technology. Copyright © 2012 John Wiley & Sons, Ltd.     

Phosphors Ba2LaTaO6:Mn4+ and its alkali metal charge compensation for plant growth illumination

A series of Mn⁴⁺-doped and Mn⁴⁺,K⁺-co-doped Ba₂LaTaO₆ (BLT) double-perovskite phosphors was synthesized using a high-temperature solid-state reaction. The phase purity and luminescence properties were also studied. The optimum doping concentration of Mn⁴⁺ and K⁺ was obtained by investigating the photoluminescence excitation spectra and photoluminescence emission spectra. The comparison of BLT:Mn⁴⁺ phosphors with and without K⁺ ions shows that the photoluminescence intensity of K⁺-doped phosphors was greatly enhanced. This is because there was a charge difference when Mn⁴⁺ ions were doped with Ta⁵⁺ ions in BLT. Mn⁴⁺–K⁺ ion pairs were formed after doping K⁺ ions, which hinders the nonradiative energy transfer between Mn⁴⁺ ions. Therefore, the luminescence intensity, quantum yield, and thermal stability of phosphors were enhanced. The electroluminescence spectra of BLT:Mn⁴⁺ and BLT:Mn⁴⁺,K⁺ were measured. The spectra showed that the light emitted from the phosphors corresponded well with chlorophyll a and phytochrome P_R. The results show that the BLT:Mn⁴⁺,K⁺ phosphors had good luminescence properties and application prospects and are ideal materials for plant-illuminated red phosphors.