Characterization and luminescence properties of CaMgSi2O6:Eu2+ blue phosphor

A blue CaMgSi₂O₆:Eu²⁺ phosphor was prepared by the solid‐state reaction method and the phosphor characterized in terms of crystal structure, particle size, photoluminescence (PL), thermoluminescence (TL) and mechanoluminescence (ML) properties using X‐ray diffraction (XRD), transmission electron microscopy (TEM), PL spectroscopy, TLD reader and ML impact technique. The XRD result shows that phosphor is formed in a single phase and has a monoclinic structure with the space group C2/c. Furthermore, the PL excitation spectra of Eu²⁺‐doped CaMgSi₂O₆ phosphor showed a strong band peak at 356 nm and the PL emission spectrum has a peak at 450 nm. The depths and frequency factors of trap centers were calculated using the TL glow curve by deconvolution method in which the trap depths were found to be 0.48 and 0.61 eV. The formation of CaMgSi₂O₆:Eu²⁺ phosphor was confirmed by Fourier transform infrared spectroscopy. The ML intensity increased linearly with the impact velocity of the piston used to deform the phosphor. It was shown that the local piezoelectricity‐induced electron bombardment model is responsible for the ML emission. Finally, the optical properties of CaMgSi₂O₆:Eu²⁺ phosphors are discussed. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of Ba3Si6O12N2:Eu2+ phosphor

Eu²⁺‐doped Ba₃Si₆O₁₂N₂ phosphors were prepared successfully via a modified solid‐state diffusion method. The phosphors were characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and photoluminescence measurements. These phosphors were effectively excited at 355 nm and an intense emission peaking in the range 480 nm to 525 nm in the blue region was observed. The optimized dopant concentration was determined to be 1 mol% of Eu²⁺ ion. The colour coordinates for phosphor were found to be (0.196, 0.326) in the blue region. This phosphor may find application for near‐ultraviolet (NUV) excited lamp phosphors. The thermoluminescence study shows the complex glow curve. Trapping parameters (activation energy and frequency factor) were calculated for individual deconvoluted peaks by Chen's peak shape method, the initial rise method and the whole glow peak method. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence characteristics of Sr3B2O6:Eu2+ yellow phosphor

Sr₃B₂O₆:Eu²⁺ yellow phosphor was prepared by the combustion method. The crystalline structure, photoluminescence and thermoluminescence properties of Sr₃B₂O₆:Eu²⁺ were investigated extensively. The X‐ray diffraction result indicates that the Sr₃B₂O₆:Eu²⁺ phosphor exhibited a rhombohedral crystal structure. The emission spectra under a 435 nm excited wavelength showed an intense broad band peaking at 574 nm, which corresponds to the 4f⁶5d¹ → 4f⁷ transition of Eu²⁺ ion. There were two different sites of Sr replaced by Eu in host lattice. The concentration quenching process between Eu²⁺ ions is determined and the corresponding concentration quenching mechanism was verified as dipole‐quadrupole interaction. The glow curve under 3 Gy β‐ ray irradiation had the glow peak at 160°C and the average activation energy was defined as about 0.98 eV. Copyright © 2015 John Wiley & Sons, Ltd.     

New UVA‐emitting BaAlBO3F2:Eu2+ phosphor with PL and TL properties for phototherapy lamp

We present a new phosphor material, BaAlBO₃F₂ doped with Eu²⁺ ions, having emission in the UVA region. The phosphor material is prepared by a simple wet chemical method. Phase confirmation was carried out using the Rietveld refinement program which shows that BaAlBO₃F₂:Eu²⁺ has an hexagonal crystal system. Using a Fourier transform infrared spectroscopy graph, we studied the bond stretching present in the phosphor material. Photoluminescence (PL) characterization, carried out using a RF spectrofluorophotometer, shows two types of PL excitation and emission. Before reduction, emission is in the blue region at 431 nm; after reduction, excitation is at 258 nm and emission is at 361 nm, which is in the UVA region. Some thermoluminescence (TL) studies were carried out in this material for the first time, for example, determination of the trapping parameters, linearity, fading, glow curve convolution and deconvolution (GCCD) function for curve fitting and the T_m–T_stop method for confirmation of the trapped centers in the TL glow peak. Copyright © 2016 John Wiley & Sons, Ltd.     

Europium doped Sr2YNbO6 double perovskite phosphor for photoluminescence and thermoluminescence properties

A luminescent double perovskite phosphor Sr₂YNbO₆ doped with Eu³⁺ crystallized to the monoclinic phase and was synthesized successfully via a conventional high-temperature combustion method. The formation of the crystal structure, phase purity, and surface morphology were studied using X-ray diffraction patterns and scanning electron microscopy. The characteristic vibrations between the atoms of the functional groups present in phosphor were studied using Fourier transform infrared spectra analysis. The luminescence properties of the prepared phosphors were investigated in terms of photoluminescence (PL) and thermoluminescence (TL). PL excitation spectra exhibited charge transfer bands and the characteristic 4f⁶ transitions of Eu³⁺. A prominent PL emission was obtained for the phosphor doped with 4 mol% Eu³⁺ under the 396 nm excitation wavelength. PL emission quenching was observed for the higher doping concentrations due to a multipole–multipole interaction. A highly intense PL emission arose due to the hypersensitive ⁵D₀–⁷F₂ electric dipole transition of Eu³⁺ that dominated the emission spectra. The thermal stability of the phosphor was examined through temperature-dependent PL. The TL properties of the Sr₂YNbO₆ double perovskites irradiated with a ⁹⁰Sr beta source at different doses were measured. The double perovskite phosphors under study showed a linear dose–response with increasing beta dose, ranging from 1 Gy to 10 Gy. Trapping parameters of the TL glow curves were determined using Chen's peak shape method and computerized glow curve deconvolution (CGCD). CGCD fitting of the TL glow curves revealed that it was consisted of three major peaks and followed second-order kinetics. The estimated activation energies were determined using different methods and were comparable and significant.     

Synthesis and thermoluminescence characterizations of Sr2B5O9Cl:Dy3+ phosphor for TL dosimetry

The photoluminescence (PL) and thermoluminescence (TL) displayed by Dy‐activated strontium haloborate (Sr₂B₅O₉Cl) were studied. A modified solid‐state reaction was employed for the preparation of the phosphor. Photoluminescence spectra showed blue (484 nm) and yellow (575 nm) emissions due to incorporation of Dy³⁺ into host matrix. The Dy‐doped (0.5 mol%) Sr₂B₅O₉Cl was studied after exposure to γ‐irradiation and revealed a prominent glow curve at 261°C with a small hump around 143°C indicating that two types of traps were generated. The glow peak at the higher temperature side (261°C) was more stable than the lower temperature glow peak. The TL intensity was 1.17 times less than that of the standard CaSO₄:Dy thermoluminescence dosimetry (TLD) phosphor, the phosphor showed a linear dose–response curve for different γ‐ray irradiation doses (0.002–1.25 Gy) and fading of 5–7% was observed for higher temperature peaks upon storage. Trapping parameters and their estimated error values have been calculated by Chen's peak shape method and by the initial rise method. Values of activation energies estimated by both these techniques were comparable. The slight difference in activation energy values calculated by Chen's peak shape method indicated the formation of two kinds of traps Furthermore, slight differences in frequency values are due to various escaping and retrapping probabilities. Copyright © 2014 John Wiley & Sons, Ltd.     

Mechanoluminescence,thermoluminescence, photoluminescence studies on Ca3Y2Si3O12:RE3+ (RE3+ = Dy3+and Eu3+) phosphors

Dy³⁺ and Eu³⁺ activated Ca₃Y₂Si₃O₁₂ phosphors were synthesized by the solid‐state synthesis method. The phosphors were characterized by X‐ray diffraction (XRD), mechanoluminescence (ML), thermoluminescence (TL) and photoluminescence (PL) to determine structure and luminescence. For ML glow curves, only one peak was observed, as only one type of luminescence centre was formed during irradiation. The Ca₃Y₂Si₃O₁₂:Dy³⁺ TL glow curve showed a single peak at 151.55°C and the Ca₃Y₂Si₃O₁₂:Eu³⁺ TL glow curve peaked at 323°C with a small peak at 192°C, indicating that two types of traps were activated. The trapping parameters for both the samples were calculated using Chen's peak shape method. Dy³⁺‐activated Ca₃Y₂Si₃O₁₂ showed emission at 482 and 574 nm when excited by a 351 nm excitation wavelength, whereas the Eu³⁺‐activated Ca₃Y₂Si₃O₁₂ phosphor PL emission spectra showed emission peaks at 613 nm, 591 nm, 580 nm when excited at 395 nm wavelength. When excited at 466 nm, prominent emission peaks were observed at their respective positions with very slight shifts. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and luminescence properties of a novel blue emitting phosphor NaMgPO4:Eu2+

A novel blue‐emitting phosphor of Eu²⁺‐activated NaMgPO₄ was prepared by combustion‐assisted synthesis. Sodium dihydrogen phosphate and magnesium nitrate were used as the source of Na, P and Mg, respectively. The ratios of magnesium and phosphorus components that were dissolved into the combustion solution were changed from 1:1 to 1:1.3. Their effect on the crystallinities and photoluminescence spectra of the phosphor particles were investigated. The post‐heated phosphor particles had a broad excitation wavelength that ranged from 240 to 410 nm. The phosphor particles prepared from the combustion solution with a 1:1.2 ratio of magnesium to phosphorus had maximum emission intensity under ultraviolet excitation. The effect of doped Eu²⁺ concentration on the emission intensity of NaMgPO₄:Eu²⁺ was also investigated.     

Luminescence in Li2BaP2O7

The photo‐, thermo‐ and optically stimulated luminescence in Li₂BaP₂O₇ activated with Eu²⁺/Cu⁺ are reported. Strong thermoluminescence, which is about two times greater than LiF‐TLD 100 was observed in the Eu²⁺‐activated sample. It also exhibited optically stimulated luminescence sensitivity of ~20% that of commercial Al₂O₃:C phosphor. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis and characterization of blue long‐lasting BaCa2Al8O15:Eu2+, Dy3+ phosphor

We have synthesized and characterized a new BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ phosphor prepared by the combustion method. X‐ray diffraction, thermoluminescence, scanning electron microscope, time decay and optical spectral analysis photoluminescence excitation, emission spectra were used to characterize the phosphors. Broadband ultraviolet excited luminescence of the BaCa₂Al₈O₁₅:Eu²⁺,Dy³⁺ was observed in the blue region (λ_max = 435 nm) due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the Eu²⁺ ion. Scanning electron microscopy has been used for exploring the morphological properties of the prepared phosphors. The BaCa₂Al₈O₁₅:Eu²⁺ phosphor has a blue afterglow when Dy³⁺ ions were co‐doped. The thermoluminescence spectra show that the Dy³⁺ ion induces a proper trap in the phosphor with a depth of 0.67 eV and results in a long afterglow phosphorescence. Copyright © 2013 John Wiley & Sons, Ltd.     

Comparison of thermoluminescence characteristics in γ‐ray and C5+ ion beam‐irradiated LiCaAlF6:Ce phosphor

We compare the thermoluminescence (TL) behavior of Ce³⁺ ion‐activated LiCaAlF₆ exposed to γ‐rays and a carbon ion beam. The reported phosphor is synthesized using an in‐house precipitation method with varying concentrations of activator ion and is characterized by X‐ray diffraction (XRD) and TL. Rietveld refinement is performed to study the structural statistics. The TL glow curve consists of a prominent glow peak at 232°C with three shoulders at 115, 159 and 333°C when exposed to γ‐rays from a ⁶⁰Co source. When exposed to a C⁵⁺ ion beam, the TL glow curve consists of five peaks with peak temperatures near 156, 221, 250, 287 and 330°C, and is found to vary slightly with changing fluence. Glow curve convolution deconvolution (GCCD) functions are applied to the TL curves for complete analysis of the glow curve structure and TL traps. The order of kinetics (b), activation energy (E) and frequency factor are determined using Chen's peak shape method and theoretical curves are drawn using GCCD functions. A track interaction model (TIM) is used to explain the sublinearity/saturation at higher fluences. Ion beam parameters are analyzed using Monte‐Carlo simulation‐based SRIM‐2013 code. Copyright © 2016 John Wiley & Sons, Ltd.     

Photoluminescence and thermoluminescence of K2Mg(SO4)2:Eu and evaluation of its kinetic parameters

The K₂Mg(SO₄)₂:Eu phosphor, synthesized by a solid‐state diffusion method, was studied for its photoluminescence (PL) and thermoluminescence (TL) characteristics. The X‐ray diffraction (XRD) pattern of the material was matched with the standard JCPDF No. 36–1499. For PL characteristics, K₂Mg(SO₄)₂:Eu²⁺ showed an emission peak at 474 nm when excited at 340 nm, while it showed Eu³⁺ emission at 580 nm, and 594 nm splitting at 613 nm and 618 nm for an excitation of 396 nm wavelength due to radiative transitions from ⁵D₀ to ⁷F_j (j = 0, 1, 2, 3). The Commission International de I′ Eclairage (CIE) chromaticity coordinates were also calculated for the K₂Mg(SO₄)₂:Eu phosphor, and were close to the NTSC standard values. For the TL study, the prepared sample was irradiated using a ⁶⁰Co source of γ‐irradiation at the dose rate of 0.322 kGy/h for 2 min. The formation of traps in K₂Mg (SO₄)₂:Eu and the effects of γ‐radiation dose on the glow curve are discussed. Well defined broad glow peaks were obtained at 186°C. With increasing γ‐ray dose, the sample showed linearity in intensity. The presence of a single glow peak indicated that there was only one set of traps being activated within the particular temperature range. The presented phosphors were also studied for their fading, reusability and trapping parameters. There was just 2% fading during a period of 30 days, indicating no serious fading problem. Kinetic parameters were calculated using the initial rise method and Chen's half‐width method. Activation energy and frequency factor were found to be 0.77 eV and 1.41 × 10⁶ sec^?1.     

Persistent luminescence of CaMgSi2O6:Eu2+,Dy3+ and CaMgSi2O6:Eu2+,Ce3+ phosphors prepared using the solid‐state reaction method

CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were synthesized using the solid‐state reaction method. X‐Ray diffraction (XRD) and photoluminescence (PL) analyses were used to characterize the phosphors. The XRD results revealed that the synthesized CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors were crystalline and are assigned to the monoclinic structure with a space group C2/c. The calculated crystal sizes of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors with a main (221) diffraction peak were 44.87 and 53.51 nm, respectively. Energy‐dispersive X‐ray spectroscopy (EDX) confirmed the proper preparation of the sample. The PL emission spectra of CaMgSi₂O₆:Eu²⁺,Dy³⁺ and CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphors have a broad band peak at 444.5 and 466 nm, respectively, which is due to electronic transition from 4f⁶5d¹ to 4f⁷. The afterglow results indicate that the CaMgSi₂O₆:Eu²⁺,Dy³⁺ phosphor has better persistence luminescence than the CaMgSi₂O₆:Eu²⁺,Ce³⁺ phosphor. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and photoluminescence properties of Eu3+‐activated Ba2Mg(PO4)2 phosphor

In this paper, we have reported the photoluminescence (PL) properties of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor synthesized using a wet chemical method. The preliminary scanning electron microscopy (SEM) investigation of the sample revealed irregular surface morphology with particle sizes in the 10–50 μm range. The strongest PL excitation peak was observed at 396 nm. The emission spectra indicated that this phosphor can be effectively excited by the 396 nm wavelength. Upon 396 nm excitation, the emission spectrum showed characteristics peaks located at 592 nm and 615 nm. These intense orange‐red emission peaks were obtained due to f→f transitions of Eu³⁺ ions. The emission peak at 592 nm is referred to as the magnetic dipole ⁵D₀→⁷F₁ transition and the emission peak at 615 nm corresponded to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺. The Commission Internationale de l’Eclairage (CIE) coordinates of the Ba₂Mg(PO₄)₂:Eu³⁺ phosphor were found to be (0.586, 0.412) for wavelength 592 nm and (0.680, 0.319) for wavelength 615 nm situated at the edge of the CIE diagram, indicating high colour purity of phosphors. Due to the high emission intensity and a good excitation profile, Eu³⁺‐doped Ba₂Mg(PO₄)₂ phosphor may be a promising orange‐red phosphor candidate for solid‐state lighting applications.     

Structural,morphological, and photoluminescence properties of RE (RE = Dy3+, Eu3+, Sm3+)-doped CaAlBO4 phosphor synthesized by combustion method

The CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor were prepared via combustion synthesis and studied by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), photoluminescence (PL) spectra and CIE coordinates. The phase formation of the obtained phosphor was analyzed by XRD and the result was confirmed by standard PDF Card No. 1539083. XRD data successfully indicated pure phase of CaAlBO₄ phosphor. The crystal structure of CaAlBO₄ phosphor is orthorhombic with space group Ccc2 (37). The SEM image of CaAlBO₄ phosphor reveals an agglomerated morphology and non-uniform particle size. The EDS image provides evidence of the elements present and the chemical makeup of the materials. Under the 350 nm excitation, the emission spectrum of Dy³⁺ activated CaAlBO₄ phosphor consists of two main groups of characteristic peaks located at 484 and 577 nm which are ascribed to ⁴F_9/2 → ⁶H_15/2 and ⁴F_9/2 → ⁶H_13/2 transition of Dy³⁺ respectively. The PL emission spectra of CaAlBO₄:Eu³⁺ phosphor shows characteristics bands observed around 591 and 613 nm, which corresponds to ⁵D₀ → ⁷F₁ and ⁵D₀ → ⁷F₂ transition of Eu³⁺ respectively, upon 395 nm excitation wavelength. The emission spectra of Sm³⁺ activated CaAlBO₄ phosphor shows three characteristic bands observed at 565, 601 and 648 nm which emits yellow, orange and red color. The prominent emission peak at the wavelength 601 nm, which is attributed to ⁴G_5/2 → ⁶H_7/2 transition, displays an orange emission. The CIE color coordinates of CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor are calculated to be (0.631, 0.368), (0.674, 0.325) and (0.073, 0.185). As per the obtained results, CaAlBO₄:RE (RE = Dy³⁺, Eu³⁺, Sm³⁺) phosphor may be applicable in eco-friendly lightning technology.     

Luminescence properties of green‐emitting Ca2MgSi2O7:Eu2+ phosphor by a solid‐state reaction method

A europium (Eu)‐doped di‐calcium magnesium di‐silicate phosphor, Ca₂MgSi₂O₇:Eu²⁺, was prepared using a solid‐state reaction method. The phase structure, particle size, surface morphology, elemental analysis, different stretching mode and luminescence properties were analyzed by X‐ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM) with energy dispersive X‐ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, photoluminescence (PL) and mechanoluminescence (ML). The phase structure of Ca₂MgSi₂O₇:Eu²⁺ was an akermanite‐type structure, which belongs to the tetragonal crystallography with space group P4?2₁m; this structure is a member of the melilite group and forms a layered compound. The surface of the prepared phosphor was not found to be uniform and particle distribution was in the nanometer range. EDX and FTIR confirm the components of Eu²⁺‐doped Ca₂MgSi₂O₇ phosphor. Under UV excitation, the main emission peak appeared at 530 nm, belonging to the broad emission ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The ML intensity of the prepared phosphor increased linearly with increasing impact velocity. A CIE color chromaticity diagram and ML spectrum confirmed that the prepared Ca₂MgSi₂O₇:Eu²⁺ phosphor would emit green color and the ML spectrum was similar to that of PL, which indicated that ML is emitted from the same center of Eu²⁺ ions. Copyright © 2015 John Wiley & Sons, Ltd.     

Structural characterization of Er3+,Yb3+‐doped Gd2O3 phosphor,synthesized using the solid‐state reaction method,and its luminescence behavior

We report the synthesis and structural characterization of Er³⁺,Yb³⁺‐doped Gd₂O₃ phosphor. The sample was prepared using the conventional solid‐state reaction method, which is the most suitable method for large‐scale production. The prepared phosphor sample was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), thermoluminescence (TL), photoluminescence (PL) and CIE techniques. For PL studies, the excitation and emission spectra of Gd₂O₃ phosphor doped with Er³⁺ and Yb³⁺ were recorded. The excitation spectrum was recorded at a wavelength of 551 nm and showed an intense peak at 276 nm. The emission spectrum was recorded at 276 nm excitation and showed peaks in all blue, green and red regions, which indicate that the prepared phosphor may act as a single host for white light‐emitting diode (WLED) applications, as verified by International de I'Eclairage (CIE) techniques. From the XRD data, the calculated average crystallite size of Er³⁺ and Yb³⁺‐doped Gd₂O₃ phosphor is ~ 38 nm. A TL study was carried out for the phosphor using UV irradiation. The TL glow curve was recorded for UV, beta and gamma irradiations, and the kinetic parameters were also calculated. In addition, the trap parameters of the prepared phosphor were also studied using computerized glow curve deconvolution (CGCD). Copyright © 2015 John Wiley & Sons, Ltd.     

Novel blue‐emitting SrMg2Al16O27:Eu2+ phosphor for solid‐state lighting

Eu²⁺‐activated SrMg₂Al₁₆O₂₇ novel phosphor was synthesized by a combustion method (550°C furnace). The prepared phosphor was first characterized by X‐ray diffraction (XRD) for confirmation of phase purity. SEM analysis showed the morphology of the phosphor. The photoluminescence characteristics showed broad‐band excitation at 324 nm, which was monitored at 465 nm emission wavelength. The SrMg₂Al₁₆O₂₇:Eu²⁺ phosphor shows broad blue emission centred at 465 nm, emitting a blue light corresponding to 4f⁶5d¹ → 4f⁷ transition. Here we report the photoluminescence characteristics of the prepared phosphor and compare it with commercial BAM:Eu²⁺ phosphor. Copyright © 2011 John Wiley & Sons, Ltd.     

Microwave‐assisted sintering synthesis of greenish‐yellow emitting Sr2SiO4:Eu2+ phosphors

Europium ion (Eu²⁺) doped Sr₂SiO₄ phosphors with greenish‐yellow emission were synthesized using microwave‐assisted sintering. The phase structure and photoluminescence (PL) properties of the obtained phosphor samples were investigated. The PL excitation spectra of the Sr₂SiO₄:Eu²⁺ phosphors exhibited a broad band in the range of 260 nm to 485 nm with a maximum at 361 nm attributed to the 5f‐4d allowed transition of the Eu²⁺ ions. Under an excitation at 361 nm, the Sr₂SiO₄:Eu²⁺ phosphor exhibited a greenish‐yellow emission peak at 541 nm with an International‐Commission‐on‐Illumination (CIE) chromaticity of (0.3064, 0.4772). The results suggest that the microwave‐assisted sintering method is promising for the synthesis of phosphors owing to the decreased sintering time without the use of additional reductive agents.     

Swift heavy ion induced structural and luminescence characterization of Y2O3:Eu3+ phosphor: a comparative study

We report a comparative study on structural and thermoluminescence modifications of Y₂O₃:Eu³⁺ phosphor induced by 150 MeV Ni⁷⁺, 120 MeV Ag⁹⁺ and 110 MeV Au⁸⁺ swift heavy ions (SHI) in the fluence range 1 × 10¹¹ to 1 × 10¹³ ions/cm². X‐Ray diffraction and transition electron microscopy studies confirm the loss of crystallinity of the phosphors after ion irradiation, which is greater in the case of Au ion irradiation. Structural refinement using the Rietveld method yields the various structural parameters of ion‐irradiated phosphors. Thermoluminescence glow curves of ion‐irradiated phosphors show a small shift in the position of the peaks, along with an increase in intensity with ion fluence. Stopping range of ions in Matter (SRIM) calculations were performed to correlate the change in thermoluminescence properties of various ion‐irradiated phosphors. It shows that the defects created by 110 MeV Au⁸⁺ ions are greater in number. Trapping parameters of ion‐irradiated phosphors were calculated from thermoluminescence data using various glow curve analysis methods. Copyright © 2013 John Wiley & Sons, Ltd.