Evaluation of brushes for removal of fouling from fouling-release surfaces, using a hydraulic cleaning device

A portable hydraulic device has been developed for use in optimizing the design of brushes and cleaning units that may be employed to maintain fouling-release coatings. Laboratory tests showed that characteristics of experimental cleaning brushes, including bristle stiffness, density, and angle, significantly affected the shear and normal forces imparted to the surface and thus, to any encrusting organisms. The standoff distance between the cleaning unit and the surface also influenced the forces generated. The rate of rotation of the brush, however, had little effect on force. The hydraulic device, with its experimental brushes, can also be used to evaluate the cleanability of fouling-release surfaces in situ, or to assess wear of the coating system due to cleaning.     

Simulated and experimental estimates of hydrodynamic drag from bio-logging tags

Drag force acting on swimming marine mammals is difficult to measure directly. Researchers often use simple modeling and kinematic measurements from animals, or computational fluid dynamics (CFD) simulations to estimate drag. However, studies that compare these methods are lacking. Here, computational simulation and physical experiments were used to estimate drag forces on gliding bottlenose dolphins (Tursiops truncatus). To facilitate comparison, variable drag loading (no-tag, tag, tag + 4, tag + 8) was used to increase force in both simulations and experiments. During the experiments, two dolphins were trained to perform controlled glides with variable loading. CFD simulations of dolphin/tag geometry in steady flow (1–6 m/s) were used to model drag forces. We expect both techniques will capture relative changes created by experimental conditions, but absolute forces predicted by the methods will differ. CFD estimates were within a calculated 90% confidence interval of the experimental results for all but the tag condition. Relative drag increase predicted by the simulation vs. experiment, respectively, differed by between 21% and 31%: tag, 4% vs. 33%; tag + 4, 47% vs. 68%; and tag + 8, 108% vs. 77%. The results from this work provide a direct comparison of computational and experimental estimates of drag, and provide a framework to quantify uncertainty.     

Impact of diatomaceous biofilms on the frictional drag of fouling-release coatings

Skin-friction results are presented for fouling-release (FR) hull coatings in the unexposed, clean condition and after dynamic exposure to diatomaceous biofilms for 3 and 6 months. The experiments were conducted in a fully developed turbulent channel flow facility spanning a wide Reynolds number range. The results show that the clean FR coatings tested were hydraulically smooth over much of the Reynolds number range. Biofilms, however, resulted in an increase in skin-friction of up to 70%. The roughness functions for the biofilm-covered surfaces did not display universal behavior, but instead varied with the percentage coverage by the biofilm. The effect of the biofilm was observed to scale with its mean thickness and the square root of the percentage coverage. A new effective roughness length scale (k_eff) for biofilms based on these parameters is proposed. Boundary layer similarity-law scaling is used to predict the impact of these biofilms on the required shaft power for a mid-sized naval surface combatant at cruising speed. The increase in power is estimated to be between 1.5% and 10.1% depending on the biofilm thickness and percentage coverage.     

On-line monitoring of antifouling and fouling-release surfaces using bioluminescence and fluorescence measurements during laminar flow

A laminar flow biofilm-monitoring system was used to determine the efficacies of three antifouling (AF) coatings and five fouling-release (FR) coatings againstVibrio harveyi attachment. On-line measurements of tryptophan fluorescence and bioluminescence from each coating, normalized to an upstream stainless steel coupon, were used to determine the effects of AF and FR surfaces on biofilm formation. The AF coatings consisted of 5, 10, and 35 wt% Sea Nine 211 (C9211) incorporated into a vinyl copolymer. Both the 10 and 35 wt% coatings significantly inhibited biofilm biomass development measured by tryptophan fluorescence compared to the stainless steel control.V. harveyi bioluminescence was significantly greater than tryptophan fluorescence in cells attached to these coatings, suggesting that bioluminescence expression may be a marker for cellular stress or toxicity in biofilms. Five different polydimethylsiloxane (PDMS) FR coatings did not inhibit biofilm formation under low flow conditions. However, four PDMS coatings demonstrated decreased biomass levels compared to stainless steel after exposure to a shear stress of 330 dynes cm^–2. There was no toxic additive in these coatings; bioluminescence and tryptophan fluorescence were proportional.     

Lateral hydrodynamic effects of rotating filaments

On the basis of the filament rotation model that was elaborated for interpretations in cell motility, the lateral hydrodynamic effects of rotating filaments have been investigated by large-scale model experiments. Helices were rotated by small electric motors in a medium of high viscosity (honey or polyethyleneglycol). The observed effects, hitherto not investigated in detail by hydrodynamics, show some features that were attributed to the indefinable formative power or vital force of the past. The main effects generated by the rotating filaments are (1) flows and flow patterns with impact zones where flows collide, (2) regions of excessive pressure and negative pressure (corner effect) along a wall, (3) grooves and smoothly shaped ridges on a free fluid surface, and (4) rolling motions of freely hanging filaments. All effects and flow patterns depend on the appropriate distribution of rotating and counterrotating filaments. Each change of the rotational direction means a dramatic alteration. The application of the observed effects explains largely the function of the microtubule/microfilament hoops or helices during the cytokinesis of a plant cell. Interpretations or simulations are described for events as the formation of secondary wall thickenings, the orientation of their microfibrils, the motion of the preprophase band microtubules, the formation of the phragmosome, the migration, stationary position and shape of the preprophase nucleus, the girdle-, septum- and H-piece formation of cell walls in algae and some events of morphogenesis inMicrasterias. Further interpretations are related to the lateral flows and to invaginations of free cell membranes, to lateral filament motions, to the right-left problem, to the selfintertwining of filaments, to the rotation of a cell body by its flagellum, to the repulsion of chromatids during meiosis and to the tetragonal and hexagonal arrangement of filaments.Dedicated to Prof. DrLothar Geitler on the occasion of the 90th anniversary of his birthday.     

Influence of hydrodynamic stress on the frictional drag of biofouling communities

The role of hydrodynamic wall shear stresses on the development of the fouling community structure and resulting frictional drag were examined using a commercially available fouling release coating. Immersed test panels were exposed to three different hydrodynamic treatments, one static and two dynamic (corresponding to an estimated wall shear stress of 7.0 and 25.5 Pa). The drag of the panels was measured in a hydrodynamic test chamber at discrete time intervals over 35 days. The fouling community composition on the static panels was significantly different from the organisms observed on the dynamic panels. Despite different fouling community composition, the drag forces measured on the panels were very similar. This suggests that the frictional drag of low form and soft fouling communities are similar and that there may be a stepwise increase in frictional drag associated with the presence of mature calcareous organisms.     

The effect of spine postures on the hydrodynamic drag in Epinephelus ongus larvae

Laboratory behavioural observation and computational fluid dynamics (CFD) analysis were conducted to examine whether the movement of the elongated dorsal and pelvic spines changed the hydrodynamic drag in white‐streaked grouper Epinephelus ongus larvae. The behavioural observation in the tank revealed that the larvae extended the dorsal and pelvic spines during passive transport and retracted during swimming; the angles of the dorsal and pelvic spines in relation to the anteroposterior axis were larger during the passive transport (mean ± s.d . = 28·84 ± 14·27 and 20·35 ± 15·05°) than those during the swimming (mean ± s.d . = 2·59 ± 5·55 and 0·32 ± 6·49°). The CFD analysis indicated that the relative hydrodynamic drag acting on the larvae was approximately 1·25 times higher when the spines were extended (passive transport) than when the spines were retracted (swimming), suggesting that the E. ongus larvae have an ability to adjust their hydrodynamic drag depending on the behavioural context.     

Development of the initial diatom microfouling layer on antifouling and fouling-release surfaces in temperate and tropical Australia

Diatoms are a major component of the slime layers that form on artificial surfaces in marine environments. In this article, the role played by diatoms during the pioneering stages of colonization of three marine antifouling (AF) coatings, viz Intersmooth 360®, Super Yacht 800® and a fouling-release (FR) coating Intersleek 700®, was investigated. The study was conducted over three distinct seasons in two very different marine environments in Australia, ie temperate Williamstown, Victoria and tropical Cairns, Queensland. Diatom fouling occurred more rapidly on the FR coating Intersleek 700, compared to both biocidal AF paints. However, colonization by diatoms on all three coatings was generally slow during the 16-day study. Benthic diatoms do not subsist by floating around in the water column, rather they only gain the opportunity to colonize new surfaces when they either voluntarily release or are displaced from their benthic habitat, thereafter entering the water column where the opportunity to adhere to a new surface presents itself. However, once settled, fouling diatoms grow exponentially from the site of attachment, spreading out until they populate large areas of the surface. This mode of surface colonization correlates more with an ‘infection’ type, epidemiology model, a mechanism that accounts for the colonization of significant regions of the coating surface from a single fouling diatom cell, forming ‘clonal patches’. This is in comparison to the bacterial colonization of the surface, which exhibits far more rapid recruitment and growth of cells on the substratum surface. Therefore, it is hypothesized that fouling diatoms may be characterized more by their ability to adhere and grow on surfaces already modified by bacterial biofilms, rather than on their strength of adhesion. Cell morphology and the ability to avoid shear may also be an important factor.     

Algal antifouling and fouling-release properties of metal surfaces coated with a polymer inspired by marine mussels

The marine antifouling and fouling-release performance of titanium surfaces coated with a bio-inspired polymer was investigated. The polymer consisted of methoxy-terminated poly(ethylene glycol) (mPEG) conjugated to the adhesive amino acid l-3,4-dihydroxyphenylalanine (DOPA) and was chosen based on its successful resistance to protein and mammalian cell fouling. Biofouling assays for the settlement and release of the diatom Navicula perminuta and settlement, growth and release of zoospores and sporelings (young plants) of the green alga Ulva linza were carried out. Results were compared to glass, a poly(dimethylsiloxane) elastomer (Silastic T2) and uncoated Ti. The mPEG-DOPA3 modified Ti surfaces exhibited a substantial decrease in attachment of both cells of N. perminuta and zoospores of U. linza as well as the highest detachment of attached cells under flow compared to control surfaces. The superior performance of this polymer over a standard silicone fouling-release coating in diatom assays and approximately equivalent performance in zoospore assays suggests that this bio-inspired polymer may be effective in marine antifouling and fouling-release applications.     

林带中阻力分布的理论与实验研究

推导了风向垂直于林带走向时林带内的阻力分布的解析式,比较了３种所面形状林带的阻力分布特点,并用风洞实验资料进行了验证,简析了在实际生产中的应用．     

Comparative study of biofilm formation on biocidal antifouling and fouling-release coatings using next-generation DNA sequencing

The bacterial and eukaryotic communities forming biofilms on six different antifouling coatings, three biocidal and three fouling-release, on boards statically submerged in a marine environment were studied using next-generation sequencing. Sequenced amplicons of bacterial 16S ribosomal DNA and eukaryotic ribosomal DNA internal transcribed spacer were assigned taxonomy by comparison to reference databases and relative abundances were calculated. Differences in species composition, bacterial and eukaryotic, and relative abundance were observed between the biofilms on the various coatings; the main difference was between coating type, biocidal compared to fouling-release. Species composition and relative abundance also changed through time. Thus, it was possible to group replicate samples by coating and time point, indicating that there are fundamental and reproducible differences in biofilms assemblages. The routine use of next-generation sequencing to assess biofilm formation will allow evaluation of the efficacy of various commercial coatings and the identification of targets for novel formulations.     

Evaluation of alternate harvesting strategies using experimental microcosms

Experimental evidence to evaluate alternate conservation policies for harvested populations is currently meager. We used populations of the ciliate Tetrahymena thermophila growing in test tube microcosms to experimentally evaluate the effects of alternate harvesting policies in a controlled, replicable setting. Simple density-dependent models were effective in predicting patterns of ciliate population growth in the microcosms. We evaluated several univariate models, finding that a Ricker logistic model was a better predictor of ciliate population dynamics than Gompertz logistic, non-linear logistic, or random walk models. Using the Ricker logistic model as a demographic skeleton, we modeled ciliate population dynamics with respect to three alternate harvesting policies (fixed quota, fixed proportion, and fixed escapement), each conducted at four comparable levels of harvest intensity. The parameterized demographic models predicted that fixed quota harvesting would lead to lower mean ciliate abundance and higher temporal variability in ciliate abundance than fixed proportion or fixed escapement policies, with an appreciable risk of extinction, even under the controlled environmental conditions of our experimental system. For each harvesting policy, the intensity of harvest had demonstrable effects on population density. Population variability was higher for fixed quota harvesting than the other policies. The stochastic demographic model successfully predicted heightened extinction risk in the fixed quota system, relative to the other management treatments. Our experimental evidence lends support to the theoretical prediction that fixed quota harvesting is riskier than fixed proportion or fixed escapement policies.     

Enhancing the efficacy of fouling-release coatings against fouling by Mytilus galloprovincialis using nanofillers

Fouling-release (FR) coatings minimise the adhesion strength of fouling organisms. This study describes improved technologies to control the settlement and adhesion of the important fouling organism Mytilus galloprovincialis by incorporating the nanofillers titanium dioxide (TiO₂) and carbon nanotubes (CNTs) in polydimethylsiloxane (PDMS) matrices. The incorporation of TiO₂ prevented larval settlement when photoactivated with UV light, even at the lowest concentration of the nanofiller (3.75 wt%). Notably, there was 100% mortality of pediveligers exposed to photoactivated TiO₂. However, plantigrades initially settled to photoactivated TiO₂, but their adhesion strength was significantly reduced on these surfaces in comparison to blank PDMS. In addition, plantigrades had high mortality after 6 h. In contrast to the enhanced antifouling and FR properties of PDMS incorporating TiO₂, the incorporation of CNTs had no effect on the settlement and adhesion of M. galloprovincialis.     

Modeling and analysis of hydrodynamic and physico-chemical effects in bacterial deposition on surfaces

The parallel-plate flow chamber (PFC) is often used for characterizing the propensity of microorganisms to attachment to surfaces. The model presented quantitatively analyzes the complex interplay of diffusion, convection, inertial lift, buoyancy, and surface forces in the PFC, which make it difficult to separate the surface- and microorganism-specific effects from the hydrodynamics. An empirical dimensionless factor K entering the boundary condition expresses enhancement of adhesion diffusion of microorganisms across a thin fluid layer adjacent to the surface by adhesion forces. The model examines the role of various factors (eg shear rate, size of bacterium, and strength of adhesion) on the rate of bacterial deposition. Using no adjustable parameter for strongly adhesive surfaces and K as the only adjustable parameter for repulsive or weakly adhesive surfaces, the model explains the observed decrease in deposition flux at high flow rates and compares reasonably with reported experimental results. The results suggest that the fitted value of K may be used for ‘rating’ the propensity of bacteria to deposit on surfaces and separating this from hydrodynamic effects.     

Active drag, useful mechanical power output and hydrodynamic force coefficient in different swimming strokes at maximal velocity.

By comparing the time of the same distance swum with and without an added resistance, under the assumption of an equal power output in both cases, the drag of 73 top swimmers was estimated. The active drag Fr(a.d.) at maximal swimming velocities varied considerably across strokes and individuals. In the females Fr(a.d.) ranged from 69.78 to 31.16 N in the front-crawl, from 83.04 to 37.78 N in dolphin, from 93.56 to 45.19 N in breaststroke, and from 65.51 to 37.79 N in back-stroke. In the males Fr(a.d.) ranged from 167.11 to 42.23 N in front-crawl, from 156.09 to 46.95 N in dolphin, from 176.87 to 55.61 N in breaststroke, and from 146.28 to 46.36 N in back-stroke. Also, the ratio of Fr(a.d.) to the passive drag Fr(a.d.) as determined for the analogical velocity in a tugging condition (in standard body position-front gliding) shows considerable individual variations. In the female swimmers variations in Fr(a.d.)/Fr(p.d.) ranged from 145.17 to 59.94% in front-crawl, from 192.39 to 85.57% in dolphin, from 298.03 to 124.50% in breaststroke, and from 162.87 to 85.61% in back-stroke. In the male swimmers variations in Fr(a.d.)/Fr(p.d.) ranged from 162.24 to 62.39% in front-crawl, from 191.70 to 70.38% in dolphin, from 295.57 to 102.83% in breaststroke, and from 198.82 to 74.48% in back-stroke. The main reason for such variations is found in the individual features of swimming technique and can be quantitatively estimated with the hydrodynamic force coefficient, which thus provides an adequate index of technique.     

Microscale measurements reveal contrasting effects of photosynthesis and epiphytes on frictional drag on the surfaces of filamentous algae

相似文献   

Melittin-lipid interaction: a comparative study using liposomes, micelles and bilayer disks

Comparison of melittin interaction with liposomes, bilayer disks and micelles showed that melittin binding to lipid aggregates is largely dictated by the amount of highly curved areas in the aggregates. The PEG-stabilised bilayer disks were characterised by a combination of small angle neutron scattering, cryo-transmission electron microscopy and dynamic light scattering. Importantly, the theoretically foreseen partial segregation of the lipid components, important for maintaining the structure of the bilayer disk, was confirmed. Steady state fluorescence spectroscopy indicated that melittin mainly resides at the rim of the bilayer disks. Results of the present study help increase the understanding of the mechanisms behind, and the physico-chemical factors affecting, melittin-lipid interaction. We suggest that bilayer disks, due to their stable structure, constitute interesting vehicles for transport of peptides that have high propensity to associate with lipid surfaces of high curvature.     

A novel method for nutritional studies of phytophagous mites, using vacuated leaf disks

Because many phytophagous mites often form serious pests in agricultural crops, there have been many investigations on the effect of the nutritional condition of the host plant on the development of phytophagous mite populations. Detached leaf cultures or leaf disks have been commonly used for such studies. However, the disadvantage of these methods is that nutrient levels can only be determined after chemical analyses of the leaves. We now describe a method in which air is pumped out of a closed container which holds a nutrient solution and the leaf disk. The nutrient solution is then pushed into the leaf disk. Using this method, the effect of all sorts of nutrients on phytophagous mites can be analysed. We used the method for studies on the effect of amino acids on the fecundity of the pink tea mite.