Mechanistic studies on thrombin catalysis

The kinetic mechanism of the cleavage of four p-nitroanilide (pNA) substrates by human alpha-thrombin has been investigated by using a number of steady-state kinetic techniques. Solvent isotope and viscosity effects were used to determine the stickiness of the substrates at the pH optimum of the reaction; a sticky substrate is defined as one that undergoes catalysis faster than it dissociates from the Michaelis complex. Whereas benzoyl-Arg-pNA could be classified as a nonsticky substrate, D-Phe-pipecolyl-Arg-pNA was very sticky. The other two substrates (tosyl-Gly-Pro-Arg-pNA and acetyl-D-Phe-pipecolyl-Arg-pNA) were slightly sticky. The pH profiles of kcat/Km were bell-shaped for all substrates. The pKa values determined from the pH dependence of kcat/Km for benzoyl-Arg-pNA were about 7.5 and 9.1. Similar pKa values were determined from the pH profiles of kcat/Km for tosyl-Gly-Pro-Arg-pNA and acetyl-D-Phe-pipecolyl-Arg-pNA and for the binding of the competitive inhibitor N alpha-dansyl-L-arginine-4-methylpiperidine amide. The groups responsible for the observed pKa values were proposed to be His57 and the alpha-amino group of Ile16. The temperature dependence of the pKa values was consistent with this assignment. The pKa values of 6.7 and 8.6 observed in the pH profile of kcat/Km for D-Phe-pipecolyl-Arg-pNA were displaced to lower values than those observed for the other substrates. The displacement of the acidic pKa value could be attributed to the stickiness of this substrate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Kinetics of hydrolysis of amide and anilide substrates of p-guanidino-L-phenylalanine by bovine and porcine trypsins

The rates of hydrolysis of N alpha-benzoyl-p-guanidino-L-phenylalaninamide (Bz-GPA-NH2) and N alpha-substituted p-nitroanilides (pNA) of GPA (benzyloxycarbonyl(Z)-GPA-pNA, benzoyl(Bz)-GPA-pNA and acetyl(Ac)-GPA-pNA) by bovine and porcine trypsins were compared with those of arginine (Arg) substrates. The amide type substrates of GPA were hydrolyzed as fast as those of Arg by the two enzymes with much the same kcat/Km values, though significant differences were found between the kcat and Km values of GPA derivatives and those of Arg derivatives. The kinetic behavior of porcine trypsin toward GPA substrates was almost the same as that of the bovine enzyme. The ratio of the kcat value for Bz-GPA-OEt to that for Bz-GPA-NH2 was much larger than that for the ester to amide substrates of arginine, suggesting that the conformational change of the active site of trypsin induced by a benzene ring in the side chain of Bz-GPA-OEt specifically increases the velocity of the deacylation process of the ester substrate. Remarkably low values of both kcat and Km were found for the tryptic hydrolysis of Z-GPA-pNA and Ac-GPA-pNA, as well as on that of Bz-GPA-pNA (Tsunematsu, H., et al. (1983) J. Biochem. 94, 123-128). Z-GPA-pNA is the best substrate for the two trypsins among the three N alpha-substituted anilide substrates of GPA.(ABSTRACT TRUNCATED AT 250 WORDS)     

Comparative enzymatic studies of human renin acting on pure natural or synthetic substrates

Some of the essential structural requirements for the enzymatic reaction of pure human renin acting on pure human and rat angiotensinogen and on their synthetic tetradecapeptide substrates were investigated. The five carboxy terminal amino acids of synthetic tetradecapeptides played a significant role in substrate recognition and/or hydrolysis by human renin. Kinetic constants Km, Kcat and kcat/Km of the various human renin assays were different according to the substrate used. The presence of either an asparagine or a threonine residue in the S'4 renin subsite did not affect significantly the kinetic constant values. A tyrosine residue, rather than a histidine residue, in the S'3 renin subsite gave the best synthetic substrate studied. When tyrosine residue was present in the S'2 renin subsite an important decrease in kcat was observed. Human angiotensinogen was hydrolysed by human renin with lower Km and kcat values than those measured with human and porcine synthetic substrates, suggesting that the 3-dimensional structure of human angiotensinogen plays a key role in the hydrolysis. This finding was supported by assays performed with rat angiotensinogen, which was cleared by human renin with the same kcat value as rat tetradecapeptide, but with a 49-fold lower Km. Between human and rat angiotensinogen a kcat/Km value of only 2-fold higher has been found in the renin assay using human substrate.     

Kinetic study of carboxypeptidase P-catalyzed reaction. Pressure and temperature dependence of kinetic parameters

Detailed kinetic analyses of carboxypeptidase P-catalyzed reactions were carried out spectrophotometrically using 3-(2-furyl)acryloyl-acylated peptide substrates. The maximum kcat/Km was observed at around pH 3.5 for the synthetic peptide substrates. The kcat/Km value decreased with increasing pH, with an apparent pKa value of 4.43. However, the maximum kcat was observed at neutral pH (pH congruent to 6) and the pKa was 4.49. These apparently different pH profiles for kcat/Km and kcat of this enzyme were due to the decreasing Km value in the acid pH region. The pressure and temperature dependences of these kinetic parameters were also measured. N-Benzoylglycyl-L-phenyllactate (Bz-Gly-OPhLac) gave dependences similar to those of the peptide substrate, suggesting that there is no distinct difference in the catalytic mechanism between the peptide and the ester hydrolyses.     

Use of a fluorescence plate reader for measuring kinetic parameters with inner filter effect correction

A general method is presented here for the determination of the Km, kcat, and kcat/Km of fluorescence resonance energy transfer (FRET) substrates using a fluorescence plate reader. A simple empirical method for correcting for the inner filter effect is shown to enable accurate and undistorted measurements of these very important kinetic parameters. Inner filter effect corrected rates of hydrolysis of a FRET peptide substrate by hepatitis C virus (HCV) NS3 protease at various substrate concentrations enabled measurement of a Km value of 4.4 +/- 0.3 microM and kcat/Km value of 96,500 +/- 5800 M-1 s-1. These values are very close to the HPLC-determined Km value of 4.6 +/- 0.7 microM and kcat/Km value of 92,600 +/- 14,000 M-1 s-1. We demonstrate that the inner filter effect correction of microtiter plate reader velocities enables rapid measurement of Ki and Ki' values and kinetic inhibition mechanisms for HCV NS3 protease inhibitors.     

An improved cathepsin-D substrate and assay procedure

Ten analogs of the peptide A-Phe(NO2)-Phe-Val-Leu-B were synthesized and tested as substrates for cathepsin D and pepsin. The best substrate found for cathepsin D, Phe-Ala-Ala-Phe(NO2)-Phe-Val-Leu-OM4P (kcat = 2.9 s-1; Km = 7.1 microM), has the largest kcat/Km value (408 mM-1 s-1) reported to date for this enzyme. The effect of peptide structure on solubility and kinetic parameters is discussed. The peptide provides a useful new substrate for continuous assay of cathepsin D.     

Human complement proteins D, C2, and B. Active site mapping with peptide thioester substrates

The specificity and reactivity of complement serine proteases D, B, Bb, C2, and C2a were determined using a series of peptide thioester substrates. The rates of thioester hydrolysis were measured using assay mixtures containing the thiol reagent 4,4'-dithiodipyridine at pH 7.5. Each substrate contained a P1 arginine residue, and the effect of various groups and amino acids in the P2, P3, P4, and P5 positions was determined using kcat/Km values to compare reactivities. Among peptide thioesters corresponding to the activation site sequence in B, dipeptide thioesters containing a P2 lysine residue were the best substrates for D. Extending the chain to include a P3 or P4 amino acid resulted in loss of activity, and neither the tripeptide nor the tetrapeptide containing the cleavage sequence of B was hydrolyzed. Overall, D cleaved fewer substrates and was 2-3 orders of magnitude less reactive than C1s against some thioester substrates. C2 and fragment C2a had comparable reactivities and hydrolyzed peptides containing Leu-Ala-Arg and Leu-Gly-Arg, which have the same sequence as the cleavage sites of C3 and C5, respectively. The best substrates for C2 and C2a were Z-Gly-Leu-Ala-Arg-SBzl and Z-Leu-Gly-Leu-Ala-Arg-SBzl, respectively, where Bzl is benzyl. B was the least reactive among these complement enzymes. The best substrate for B was Z-Lys-Arg-SBzl with a kcat/Km value of 1370 M-1 s-1. The catalytic fragment of B, Bb, had higher activity toward these peptide thioester substrates. The best substrate for Bb was Z-Gly-Leu-Ala-Arg-SBzl with a kcat/Km similar to C2a and 10 times higher than the value for B. Both C2a and Bb were considerably more reactive against C3-like than C5-like substrates. Bovine trypsin hydrolyzed thioester substrates with kcat/Km approximately 10(3) higher than the complement enzymes. These thioester substrates for D, B, and C2 should be quite useful in kinetic and active site studies of the purified enzymes.     

Kinetic properties of human liver alcohol dehydrogenase: oxidation of alcohols by class I isoenzymes

Class I isoenzymes of alcohol dehydrogenase (ADH) were isolated by chromatography of human liver homogenates on DEAE-cellulose, 4-[3-[N-(6-aminocaproyl)-amino]propyl]pyrazole--Sepharose and CM-cellulose. Eight isoenzymes of different subunit composition (alpha gamma 2, gamma 2 gamma 2, alpha gamma 1, alpha beta 1, beta 1 gamma 2, gamma 1 gamma 1, beta 1 gamma 1, and beta 1 beta 1) were purified, and their activities were measured at pH 10.0 by using ethanol, ethylene glycol, methanol, benzyl alcohol, octanol, cyclohexanol, and 16-hydroxyhexadecanoic acid as substrates. Values of Km and kcat for all the isoenzymes, except beta 1 beta 1-ADH, were similar for the oxidation of ethanol but varied markedly for other alcohols. The kcat values for beta 1 beta 1-ADH were invariant (approximately 10 min-1) and much lower (5-15-fold) than those for any other class I isoenzyme studied. Km values for methanol and ethylene glycol were from 5- to 100-fold greater than those for ethanol, depending on the isoenzyme, while those for benzyl alcohol, octanol, and 16-hydroxyhexadecanoic acid were usually 100-1000-fold lower than those for ethanol. The homodimer beta 1 beta 1 had the lowest kcat/Km value for all alcohols studied except methanol and ethylene glycol; kcat values were relatively constant for all isoenzymes acting on all alcohols, and, hence, specificity was manifested principally in the value of Km. Values of Km and kcat/Km revealed for all enzymes examined that the short chain alcohols are the poorest while alcohols with bulky substituents are much better substrates. The experimental values of the kinetic parameters for heterodimers deviate from the calculated average of those of their parent homodimers and, hence, cannot be predicted from the behavior of the latter. Thus, the specificities of both the hetero- and homodimeric isoenzymes of ADH toward a given substrate are characteristics of each. Ethanol proved to be one of the "poorest" substrates examined for all class I isoenzymes which are the predominant forms of the human enzyme. On the basis of kinetic criteria, none of the isoenzymes of class I studied oxidized ethanol in a manner that would indicate an enzymatic preference for that alcohol.     

The pH-dependence and group modification of beta-lactamase I.

The pH-dependence of the kinetic parameters for the hydrolysis of the beta-lactam ring by beta-lactamase I (penicillinase, EC 3.5.2.6) was studied. Benzylpenicillin and ampicillin (6-[D(-)-alpha-aminophenylacetamido]penicillanic acid) were used. Both kcat. and kcat./Km for both substrates gave bell-shaped plots of parameter versus pH. The pH-dependence of kcat./Km for the two substrates gave the same value (8.6) for the higher apparent pK, and so this value may characterize a group on the free enzyme; the lower apparent pK values were about 5(4.85 for benzylpenicillin, 5.4 for ampicillin). For benzylpenicillin both kcat. and kcat./Km depended on pH in exactly the same way. The value of Km for benzylpenicillin was thus independent of pH, suggesting that ionization of the enzyme's catalytically important groups does not affect binding of this substrate. The pH-dependence of kcat. for ampicillin differed, however, presumably because of the polar group in the side chain. The hypothesis that the pK5 group is a carboxyl group was tested. Three reagents that normally react preferentially with carboxyl groups inactivated the enzyme: the reagents were Woodward's reagent K, a water-soluble carbodi-imide, and triethyloxonium fluoroborate. These findings tend to support the idea that a carboxylate group plays a part in the action of beta-lactamase I.     

Development of a high-performance liquid chromatography assay and revision of kinetic parameters for the Staphylococcus aureus sortase transpeptidase SrtA

The SrtA isoform of the Staphylococcus aureus sortase transpeptidase is responsible for the covalent attachment of virulence- and colonization-associated proteins to the bacterial peptidoglycan. Sortase utilizes two substrates, undecaprenol-pyrophosphoryl-MurNAc(GlcNAc)-Ala-d-isoGlu-Lys(-Gly5)-d-Ala-d-Ala (branched Lipid II) and secreted proteins containing a highly conserved LPXTG sequence near their C termini. SrtA simultaneously cleaves the Thr-Gly bond of the LPXTG-containing protein and forms a new amide bond with the nucleophilic amino group of the Gly5 portion of branched Lipid II, anchoring the protein to this key intermediate that is subsequently polymerized into peptidoglycan. Here we show that reported fluorescence quenching activity assays for SrtA are subject to marked fluorescence inner filter effect quenching, resulting in prematurely hyperbolic velocity versus substrate profiles and underestimates of the true kinetic parameters kcat and Km. We therefore devised a discontinuous high-performance liquid chromatography (HPLC)-based assay to monitor the SrtA reaction employing the same substrates used in the fluorescence quenching assay: Gly5 and Abz-LPETG-Dap(Dnp)-NH2. Fluorescence or UV detection using these substrates facilitates separate analysis of both the acylation and the transpeptidation steps of the reaction. Because HPLC was performed using fast-flow analytical columns (<8min/run), high-throughput applications of this assay for analysis of SrtA substrate specificity, kinetic mechanism, and inhibition are now feasible. Kinetic analysis using the HPLC assay revealed that the kinetic parameters for SrtA with Abz-LPETG-Dap(Dnp)-NH2 are 5.5mM for Km and 0.27s-1 for kcat. The Km for Gly5 was determined to be 140microM. These values represent a 300-fold increase in Km for the LPXTG substrate and a 12,000-fold increase in kcat over literature-reported values, suggesting that SrtA is more a robust enzyme than previous analyses indicated.     

Specific inhibition of human granulocyte elastase with peptide aldehydes

The kinetic features of human granulocyte elastase, chymotrypsin, porcine pancreatic elastase and elastomucoproteinase were compared. Amino acyl ester substrates were assayed and Km and kcat values were defined. Aldehyde analogues of the p-nitroanilide substrates designed for granulocyte elastase as optimal for Km appeared to be potent inhibitors. Suc-D-Phe-Pro-valinal (Ki = 40 microM) was found to inhibit granulocyte elastase competitively and specifically when measured with synthetic substrates, and the Ki was 3 microM with the natural protein substrate, elastin.     

Subsite interactions of ribonuclease T1: viscosity effects indicate that the rate-limiting step of GpN transesterification depends on the nature of N

We report on the effect of the viscogenic agents glycerol and ficoll on the RNase T1 catalyzed turnover of GpA, GpC, GpU, and Torula yeast RNA. For wild-type enzyme, we find that the kcat/Km values for the transesterification of GpC and GpA as well as for the cleavage of RNA are inversely proportional to the relative viscosity of glycerol-containing buffers; no such effect is observed for the conversion of GpU to cGMP and U. The second-order rate constants for His40Ala and Glu46Ala RNase T1, two mutants with a drastically reduced kcat/km ratio, are independent of the microviscosity, indicating that glycerol does not affect the intrinsic kinetic parameters. Consistent with the notion that molecular diffusion rates are unaffected by polymeric viscogens, addition of ficoll has no effect on the kcat/Km for GpC transesterification by wild-type enzyme. The data indicate that the second-order rate constants for GpC, GpA, and Torula yeast RNA are at least partly limited by the diffusion-controlled association rate of substrate and active site; RNase T1 obeys Briggs-Haldane kinetics for these substrates (Km greater than Ks). Calculations suggest that the equilibrium dissociation constants (Ks) for the various GpN-wild-type enzyme complexes are virtually independent of N whereas the measured kcat values follow the order GpC greater than GpA greater than GpU. This is also revealed by the steady-state kinetic parameters of Tyr38Phe and His40Ala RNase T1, two mutants that follow simple Michaelis-Menten kinetics because of a dramatically reduced kcat value (i.e., Km = Ks).(ABSTRACT TRUNCATED AT 250 WORDS)     

Modified activity of Aeromonas aminopeptidase: metal ion substitutions and role of substrates

Aeromonas aminopeptidase contains two nonidentical metal binding sites that have been shown by both spectroscopy and kinetics to be capable of interacting with one another [Prescott, J.M., Wagner, F.W., Holmquist, B., & Vallee, B.L. (1985) Biochemistry 24, 5350-5356]. The effects of metal ion substitutions on the susceptibility of the p-nitroanilides of L-alanine, L-valine, and L-leucine--substrates that are hydrolyzed at widely differing rates by native Aeromonas aminopeptidase--were studied by determining values of kcat and Km for the 16 metalloenzymes that result from all possible combinations of Zn2+, Co2+, Ni2+, and Cu2+ in each of the two sites. The different combinations of metal ions and substrates yield a broad range in kinetic values; kcat varies by more than 1800-fold, Km by 3000-fold, and kcat/Km ratios by more than 10,000. L-Leucine-p-nitroanilide is by far the most susceptible of the three substrates, and the hyperactivation previously observed with aminopeptidase containing either Ni2+ or Cu2+ in the first binding site and Zn2+ in the second site occurs only with the two poorer substrates, L-alanine-p-nitroanilide and L-valine-p-nitroanilide. Although the enzyme with Zn2+ in both sites hydrolyzes the substrates with N-terminal alanine and valine poorly, it is extremely effective toward L-leucine-p-nitroanilide. Neither metal binding site can be identified as controlling either Km or kcat; both parameters are influenced by the identity of the metal ions, by the site each occupies, and, most strongly, by the substrate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Azoalbumin hydrolysis by Bacillus subtilis 72 subtilisin

The kinetic parameters of azoalbumin hydrolysis by alkaline proteinase from Bacillus subtilis were determined to be Km = 1.2 . 10(-3) M, kcat = 1.5 sec-1 according to the method of Lainuiwer-Berk and Km = 4 . 10(-3) M, kcat = 0.5 sec-1 from the analysis of the entire kinetic curve. It was found that pH optimum of subtilizin hydrolysis of various substrates and the shape of the curve depended on the substrate nature.     

Kinetic independence of the subunits of cytosolic glutathione transferase from the rat.

The steady-state kinetics of the dimeric glutathione transferases deviate from Michaelis-Menten kinetics, but have hyperbolic binding isotherms for substrates and products of the enzymic reaction. The possibility of subunit interactions during catalysis as an explanation for the rate behaviour was investigated by use of rat isoenzymes composed of subunits 1, 2, 3 and 4, which have distinct substrate specificities. The kinetic parameter kcat./Km was determined with 1-chloro-2,4-dinitrobenzene, 4-hydroxyalk-2-enals, ethacrynic acid and trans-4-phenylbut-3-en-2-one as electrophilic substrates for six isoenzymes: rat glutathione transferases 1-1, 1-2, 2-2, 3-3, 3-4 and 4-4. It was found that the kcat./Km values for the heterodimeric transferases 1-2 and 3-4 could be predicted from the kcat./Km values of the corresponding homodimers. Likewise, the initial velocities determined with transferases 3-3, 3-4 and 4-4 at different degrees of saturation with glutathione and 1-chloro-2,4-dinitrobenzene demonstrated that the kinetic properties of the subunits are additive. These results show that the subunits of glutathione transferase are kinetically independent.     

Electronegativity of aromatic amines as a basis for the development of ground state inhibitors of lysyl oxidase

Benzylamine derivatives containing para substituents of differing electronegativity as well as isomers of aminomethylpyridine have been assessed for their substrate and inhibitor potentials toward lysyl oxidase. Substituted benzylamines with increasingly electronegative para substituents had the lowest KI values and thus were the most effective inhibitors of the oxidation of elastin by lysyl oxidase. The kcat values for these compounds as substrates of lysyl oxidase were also reduced with increasingly electronegative para substituents. Both the Dkcat and D(kcat/Km) kinetic isotope effects decreased with increasingly electronegative p-substituents in [alpha, alpha'-2H]benzylamines. In contrast, there was no Dkcat solvent isotope effect with [2H] H2O while the D(kcat/Km) solvent isotope effect tended to increase with increasingly electronegative p-substituents. These results are consistent with the stabilization of an enzyme-generated substrate carbanion and thus the retardation of substrate oxidation by electronegative substituents. Such ground state stabilization thus can result in compounds with increased potential for the inhibition of the oxidation of protein substrates of lysyl oxidase.     

Chemical synthesis and papain-catalysed hydrolysis of N-alpha-benzyloxycarbonyl-L-lysine p-nitroanilide.

The chemical synthesis of N-alpha-benzyloxycarbonyl-L-lysine p-nitroanilide (Z-Lys-pNA) is described in detail. The pH-dependence of the catalytic parameters kcat,' Km and kcat./Km for the papain-catalysed hydrolysis of Z-Lys-pNA are determined. kcat. and Km are pH-independent between pH 5 and pH 7.42, but the pH-dependence of kcat./Km is bell-shaped, decreasing at high and low pH values with pKa values of 7.97 and 4.40 respectively. The catalytic parameters and their pH-dependence are shown to be similar to those reported for other anilide substrates and it is concluded that the Km value of 0.01 mM previously reported [Angelides & Fink (1979) Biochemistry 18, 2355-2369] is incorrect. The possibility of accumulating a tetrahedral intermediate during the papain-catalysed hydrolysis of Z-Lys-pNA is discussed.     

Human cathepsin H: deletion of the mini-chain switches substrate specificity from aminopeptidase to endopeptidase

The mini-chain of human cathepsin H has been identified as the major structural element determining the protease's substrate specificity. A genetically engineered mutant of human cathepsin H lacking the mini-chain, des[Glu(-18)-Thr(-11)]-cathepsin H, exhibits endopeptidase activity towards the synthetic substrate Z-Phe-Arg-NH-Mec (kcat = 0.4 s(-1), Km = 92 microM, kcat/Km = 4348 M(-1) s(-1)) which is not cleaved by r-wt cathepsin H. However, the mutant enzyme shows only minimal aminopeptidase activity for H-Arg-NH-Mec (kcat = 0.8 s(-1), Km = 3.6 mM, kcat/Km = 222 M(-1) s(-1)) which is one of the best known substrates for native human cathepsin H (kcat = 2.5 s(-1), Km = 150 microM, kcat/Km = 16666 M(-1) s(-1)). Inhibition studies with chicken egg white cystatin and E-64 suggest that the mini-chain normally restricts access of inhibitors to the active site. The kinetic data on substrates hydrolysis and enzyme inhibition point out the role of the mini-chain as a structural framework for transition state stabilization of free alpha-amino groups of substrates and as a structural barrier for endopeptidase-like substrate cleavage.     

Mechanistic features of lignin peroxidase-catalyzed oxidation of substituted phenols and 1,2-dimethoxyarenes

The steady state kinetic parameters Km and kcat for the oxidation of phenolic substrates by lignin peroxidase correlated with the presteady state kinetic parameters Kd and k for the reaction of the enzyme intermediate compound II with the substrates, indicating that the latter is the rate-limiting step in the catalytic cycle. ln Km and ln Kd values for phenolic substrates correlated with redox properties, unlike ln kcat and ln k. This finding suggests that in contrast to horseradish peroxidase, electron transfer is not the rate-limiting step during oxidation by lignin peroxidase compound II. A mechanism is proposed for lignin peroxidase compound II reactions consisting of an equilibrium electron transfer step followed by a subsequent rate-limiting step. Analysis of the correlation coefficients for linear relationships between ln Kd and ln Km and different calculated redox parameters supports a mechanism in which the acidic forms of phenols are oxidized by lignin peroxidase and electron transfer is coupled with proton transfer. 1,2-Dimethoxyarenes did not comply with the trend for phenolic substrates, which may be a result of more than one substrate binding site on lignin peroxidase and/or alternative binding modes. This behavior was supported by analogue studies with the 1,2-dimethoxyarenes veratric acid and veratryl aldehyde, both of which are not oxidized by lignin peroxidase. Inclusion of either had little effect on the rate of oxidation of phenolic substrates yet resulted in a decrease in the oxidation rate of 1,2-dimethoxyarene substrates, which was considerable for veratryl alcohol and less pronounced for 3,4-dimethoxyphenethylalcohol and 3,4-dimethoxycinnamic acid, in particular in the presence of veratric acid.     

Mammalian protein methylesterase. Physical and enzymic properties.

Protein methylesterase (PME) amino acid composition and substrate specificity towards methylated normal and deamidated protein substrates were investigated. The enzyme contained 23% acidic and 5% basic residues. These values are consistent with a pI of 4.45. The product formed from methylated protein by PME was confirmed as methanol by h.p.l.c. The kcat. and Km values for several methylated protein substrates ranged from 20 x 10(-6) to 560 x 10(-6) s-1 and from 0.5 to 64 microM respectively. However, the kcat./Km ratios ranged within one order of magnitude from 11 to 52 M-1.s-1. Results with the irreversible cysteine-proteinase inhibitor E-64 suggested that these low values were in part due to the fact that only one out of 25 molecules in the PME preparations was enzymically active. When PME was incubated with methylated normal and deamidated calmodulin, the enzyme hydrolysed the latter substrate at a higher rate. The Km and kcat. for methylated normal calmodulin were 0.9 microM and 31 x 10(-6) s-1, whereas for methylated deamidated calmodulin values of 1.6 microM and 188 x 10(-6) s-1 were obtained. The kcat./Km ratios for methylated normal and deamidated calmodulin were 34 and 118 M-1.s-1 respectively. By contrast, results with methylated adrenocorticotropic hormone (ACTH) substrates indicated that the main difference between native and deamidated substrates resides in the Km rather than the kcat. The Km for methylated deamidated ACTH was 5-fold lower than that for methylated native ACTH. The kcat./Km ratios for methylated normal and deamidated ACTH were 43 and 185 M-1.s-1 respectively. These results indicate that PME recognizes native and deamidated methylated substrates as two different entities. This suggests that the methyl groups on native calmodulin and ACTH substrates may not be on the same amino acid residues as those on deamidated calmodulin and ACTH substrates.