Genetic organization of transposon Tn10

Transposon Tn10 is 9300 bp in length, with 1400 bp inverted repeats at its ends. The inverted repeats are structurally intact IS-like sequences (Ross et al., 1979). Analysis of deletion mutants and structural variants of Tn10, reported below, shows that the two IS10 segments contain all of the Tn10-encoded genetic determinants, both sites and functions, that are required for transposition. Furthermore, the two repeats (IS10-Right and IS10-Left) are not functionally equivalent: IS10-Right is fully functional and is capable by itself of promoting normal levels of Tn10 transposition; IS10-Left functions only poorly by itself, promoting transposition at a very low level when IS10-Right is inactivated. Complementation analysis shows that IS10-Right encodes at least one function, required for Tn10 transposition, which can act in trans and which works at the ends of the element. Also, all of the sites specifically required for normal Tn10 transposition have been localized to the outermost 70 bp at each end of the element; there is no evidence that specific sites internal to the element play an essential role. Finally, Tn10 modulates its own transposition in such a way that transposition-defective point mutants, unlike deletion mutants, are not complemented by functions provided in trans; and wild-type Tn10, unlike deletion mutants, is not affected by functions provided in trans from a "high hopper" Tn10 element.     

Fine structure of transposition genes on Tn2603 and complementation of its tnpA and tnpR mutations by related transposons

The fine structure of the genes tnpA, tnpR and res of Tn2603 required for its own transposition, was determined. The order of the genes was tnpA-tnpR-res from the right end of the right hand side region in Tn2603, the tnpA and tnpR encoded gene products having molecular weights of 110,000 and 21,000, respectively. The 110,000 molecular weight polypeptides was absolutely required for replicon fusion as the first stage of transposition, and named transposase. On the other hand, the 21,000 molecular weight polypeptide was necessary for resolution of the cointegrate as the second stage of transposition, and named resolvase. We also examined the ability of various transposons, assumed to be closely related, to complement the tnpA and tnpR mutations of Tn2603. The results indicated that the mercury resistance transposon, Tn2613, and Tn501, can complement both genes, but TnAs and gamma delta cannot at all. Tn501 had much less efficiency of complementation for tnpA than Tn2613. We have also discovered that the transposition frequency of transposons in the tn2613 family systematically depend on their size of transposon.     

Genetic and molecular characterization of Tn21, a multiple resistance transposon from R100.1.

Tge transposon Tn21 has been transposed from R100.1 to plasmid pACYC184 and, from the resulting recombinants, to plasmid R388. The sites of insertion and the orientation of the element in several pACYC184::Tn21 recombinants have been examined. Restriction enzyme analysis of these recombinants has resulted in a detailed map of Tn21; this is compared with the published maps of the relevant part of R100.1. Heteroduplex analysis has shown short inverted repeat sequences at the ends of the element. With various in vitro-generated deletion mutants of Tn21, the internal gene necessary for transposition (tnpA) was localized within the terminal 4.3 kilobases of the right-hand end of the element. Genetic analysis of transposition of Tn21 suggests that the process proceeds via cointegrates. Since the end products of transposition are simple recombinants of the element and the recipient replicon, Tn21 must contain a gene that codes for a resolvase type of activity (tnpR gene).     

Transposon Tn554 encodes three products required for transposition.

Tn554 is a high-frequency, site-specific, transposable element having integrative properties resembling those of lysogenic bacteriophages. Nucleotide sequence analysis indicates that Tn554 has three transposition genes, designated tnpA, tnpB and tnpC. Mutations in each of these were complemented efficiently in trans by clones containing internal fragments of Tn554; thus the products of these genes function in trans. Elements carrying deletions of the Tn554 termini could not be complemented. The product of tnpC is not absolutely required for transposition, since deletion mutations encompassing 80% of tnpC, as well as frameshift mutations located near the amino terminus of tnpC, transposed at frequencies as high as 2% of that observed with wild-type Tn554. However, such mutations affected the orientation of insertion. With wild-type Tn554 insertion occurs in a single orientation regardless of the orientation of the donor. In tnpC mutants insertion orientation was dictated by the orientation of Tn554 in the donor molecule. A mutant lacking the carboxy-terminal 59 residues of tnpB also exhibited altered insertion orientation. Thus it appears that the tnpC gene product is required for correct orientation of the element upon insertion and that this protein may interact with the carboxy-terminal portion of the tnpB gene product.     

Role of the IS50 R proteins in the promotion and control of Tn5 transposition

IS50R, the inverted repeat sequence of Tn5 which is responsible for supplying functions that promote and control Tn5 transposition, encodes two polypeptides that differ at their N terminus. Frameshift, in-frame deletion, nonsense, and missense mutations within the N terminus of protein 1 (which is not present in protein 2) were isolated and characterized. The properties of these mutations demonstrate that protein 1 is absolutely required for Tn5 transposition. None of these mutations affected the inhibitory activity of IS50, confirming that protein 2 is sufficient to mediate inhibition of Tn5 transposition. The effects on transposition of increasing the amount of protein 2 (the inhibitor) relative to protein 1 (the transposase) were also analyzed. Relatively large amounts of protein 2 were required to see a significant decrease in the transposition frequency of an element. In addition, varying the co-ordinate synthesis of the IS50 R proteins over a 30-fold range had little effect on the transposition frequency. These studies suggest that neither the wild-type synthesis rate of protein 2 relative to protein 1 nor the amount of synthesis of both IS50 R proteins is the only factor responsible for controlling the transposition frequency of a wild-type Tn5 element in Escherichia coli.     

Spontaneous deletion of citrate-utilizing ability promoted by insertion sequences.

The citrate utilization (Cit+) transposon Tn3411 was shown to be flanked by directly repeated sequences (IS3411L and IS3411R) by restriction enzyme analysis and electron microscope observation. Cit- deletion mutants were frequently found to be generated in pBR322::Tn3411 by intramolecular recombination between the two copies of IS3411. The flanking IS3411 elements of Tn3411 were shown to be functional insertion sequences by Tn3411-mediated direct and inverse transposition. Tn3411-mediated inverse transposition from pBR322::Tn3411 to the F-plasmid derivative pED100 occurred more efficiently than that of direct transposition of the Cit+ determinant. This was thought to be due to the differential transposability of IS3411L and IS3411R in the transposition process. The frequency of transposition of IS3411 marked with a chloramphenicol resistance determinant was much higher than IS3411-mediated cointegrate formation, suggesting that replicon fusions are not essential intermediates in the transposition process of Tn3411 or IS3411. Spontaneous deletions occurred with high frequency in recA hosts. The spontaneous deletion promoted by homologous recombination between two IS3411 elements in Tn3411 was examined with deletion mutants.     

Characterization of the Tn5 transposase and inhibitor proteins: a model for the inhibition of transposition.

Tn5 is a composite transposon consisting of two IS50 sequences in inverted orientation with respect to a unique, central region encoding several antibiotic resistances. The IS50R element encodes two proteins in the same reading frame which regulate the transposition reaction: the transposase (Tnp), which is required for transposition, and an inhibitor of transposition (Inh). The inhibitor is a naturally occurring deletion variant of Tnp which lacks the N-terminal 55 amino acids. In this report, we present the purification of both the Tnp and Inh proteins and an analysis of their DNA binding properties. Purified Tnp, but not Inh, was found to bind specifically to the outside end of Tn5. Inh, however, stimulated the binding activity of Tnp to outside-end DNA and was shown to be present with Tnp in these bound complexes. Inh was also found to exist as a dimer in solution. These results indicate that the N-terminal 55 amino acids of Tnp are required for sequence-specific binding. They also suggest that Inh inhibits transposition by forming mixed oligomers with Tnp which still bind to the ends of the transposon but are defective for later stages of the transposition reaction.     

Transposon Tn7. cis-Acting sequences in transposition and transposition immunity

We have identified and characterized the cis-acting sequences at the termini of the bacterial transposon Tn7 that are necessary for its transposition. Tn7 participates in two kinds of transposition event: high-frequency transposition to a specific target site (attTn7) and low-frequency transposition to apparently random target sites. Our analyses suggest that the same sequences at the Tn7 ends are required for both transposition events. These sequences differ in length and nucleotide structure: about 150 base-pairs at the left end (Tn7L) and about 70 base-pairs at the right end (Tn7R) are necessary for efficient transposition. We also show that the ends of Tn7 are functionally distinct: a miniTn7 element containing two Tn7R ends is active in transposition but an element containing two Tn7L ends is not. We also report that the presence of Tn7's cis-acting transposition sequences anywhere in a target replicon inhibits subsequent insertion of another copy of Tn7 into either an attTn7 target site or into random target sites. The inhibition to an attTn7 target site is most pronounced when the Tn7 ends are immediately adjacent to attTn7. We also show that the presence of Tn7R's cis-acting transposition sequences in a target replicon is necessary and sufficient to inhibit subsequent Tn7 insertion into the target replicon.     

Regulation of Tn5 by the right-repeat proteins: Control at the level of the transposition reaction?

The transposon Tn5 consists of inverted repeats, called IS50R and IS50L, each of which encode two proteins. We show here that the larger protein encoded on IS50R, protein 1, is absolutely required for transposition. Deletion or insertion mutants that fail to make this protein fail to promote gene movement. In addition, this protein acts in cis preferentially. We also show that the smaller protein encoded on IS50R, protein 2, is competent to inhibit transposition of a Tn5 freshly introduced into the cell on a λ phage. In contrast, the proteins from IS50L possess neither of these two activities. By assaying expression of proteins that are hybrids between β-galactosidase and IS50R proteins, we find that the regulation of transposition cannot be due to the inhibitor repressing synthesis of Tn5 proteins. Control experiments, in which we assay synthesis of IS50 proteins synthesized from a λ::IS50R that has been infected into cells carrying the transposition inhibitor, confirm this conclusion.     

Three Tn10-associated excision events: relationship to transposition and role of direct and inverted repeats

We describe three related DNA alterations associated with transposon Tn10: precise excision of Tn10, nearly precise excision of Tn10 and precise excision of the nearly precise excision remnant. DNA sequence analysis shows that each of these alterations results in excision of all or part of the Tn10 element, and each involves specific repeat sequences at or near the ends of the element. Furthermore, all three events are structurally analogous: in each case, excision occurs between two short direct-repeat sequences, with resulting deletion of all intervening material plus one copy of the direct repeat; and in all three cases, the direct repeats involved occur at either end of an inverted repeat. Analysis of mutant Tn10 elements and characterization of bacterial host mutations suggest that all three types of excision events occur by pathways that are fundamentally distinct from the pathway(s) for Tn10-promoted transposition and other DNA rearrangements (deletions and inversions) actively promoted by the element. In addition, precise excision and nearly precise excision appear to occur by very closely related or identical pathways; and several lines of evidence suggest that the 1400 bp inverted repeats at the ends of Tn10 may play a structural role in both of these events. The third excision event appears to occur by yet another pathway.     

Transposition and transposition immunity of transposon Tn3 derivatives having different ends.

Novel Tn1/3 derivatives that contained either two left- or two right-hand ends of the transposon were constructed in a small plasmid. Both transposed at reasonable frequencies to give normal transposition products, suggesting that only the 38-bp inverted repeats of Tn3 are essential for transposition. Plasmids containing transposon derivatives with only one end (either left or right) undergo transposase-dependent transposition between replicons at much lower frequencies, resulting in co-integrate molecules in which there is no substantial duplication of transposon DNA and that appear to be simple fusions of the two plasmids. Both the right and left halves of the transposon are separately able to confer transposition immunity to the plasmid, this immunity being inseparably linked to transposition proficiency and specificity.     

Nucleotide sequence of the kanamycin resistance transposon Tn903

The entire nucleotide sequence of the kanamycin resistance transposon Tn903 was determined by analyzing a mini-ColE1 derivative carrying Tn903. Tn903 was 3094 base-pairs in length and at both extremities possessed two identical inverted 1057 base-pair sequences. Furthermore, 18 bases at the ends of the 1057 base-pair sequence are themselves present in an invertedly repeated order as has been described for various insertion sequences. Analysis of initiation and termination codons in the Tn903 sequence indicated that Tn903 could possibly code for at least three high molecular weight polypeptides. One in the region between the two 1057 base-pair sequences is suggested to be the kanamycin resistance determinant (aminoglycoside 3′-phosphotransferase) from its location and size. The other polypeptides were located within the 1057 base-pair sequence and may be associated with transposition functions of Tn903.     

Transposition of the oxacillin-hydrolyzing penicillinase gene.

We have found that the oxacillin-hydrolyzing penicillinase gene (oxa) encoded by plasmid RGN238 transposes to various plasmids in a recA background. We call this transposable element Tn2603. Tn2603 encodes the genes for streptomycin, sulfonamide, and mercury resistance in addition to the oxa gene. Tn2603 has a molecular size of 19.6 kilobase pairs and appears to be flanked by small inverted repeat sequences of about 200 base pairs long.     

Binding of the Tn3 transposase to the inverted repeats of Tn3

The transposase protein and the inverted repeat sequences of Tn3 are both essential for Tn3 cointegrate formation and transposition. We have developed two assays to detect site-specific binding of transposase to the inverted repeats: (1) a nitrocellulose filter binding assay in which transposase preferentially retains DNA fragments containing inverted repeat sequences, and (2) a DNase 1 protection assay in which transposase prevents digestion of the inverted repeats by DNase 1. Both assays show that transposase binds directly to linear, duplex DNA containing the inverted repeats. The right inverted repeat of Tn3 binds slightly more strongly than the left one. Site-specific binding requires magnesium but does not require a high energy cofactor.     

Mutational analysis of the inverted repeats of Tn3

The transposase protein and the terminal inverted repeat sequences of the prokaryotic transposon Tn3 are essential for transposition. In order to determine the sequences within the inverted repeat necessary for transposition and interaction with transposase, we have constructed a series of mini-Tn3s in which specific mutations have been introduced into the inverted repeats. The effects of these mutations on transposition have been assayed in vivo using a mating-out transposition assay. Several single base-pair mutations within the transposase binding site reduce transposition frequency. Mutations that affect transposition show a greater effect when present in both inverted repeats than when present in only one inverted repeat.     

Analysis of sequences transposed by complementation of two classes of transposition-deficient mutants of Tn3.

The Tn1 and Tn3 elements are closely related transposons which carry the structural gene for ampicillin resistance. Two classes of deletion mutants of the plasmid pMB8::Tn3 (RSF1050) are unable to transpose ampicillin resistance but can be complemented in trans by a coresident Tn1 or Tn3 element. The analysis of the sequences transposed upon complementation of one class of mutants (type I) showed that the mutant element had undergone bona fide transposition. Complementation of the type II mutants led to the transposition of a sequence analogous to bacteriophage mu-promoted integration of non-mu DNA. The transposed sequence consisted of two Tn3 elements which flanked a single copy of the pMB8 portion of the RSF1050 genome. Complementation data indicated that the type II mutants are defective in at least one trans-acting function which must be supplied for transposition to occur. The nature of sequence transposed from the type II mutant is the consequence of a defective cis-acting function (or site). In addition, the type II mutants were defective in a trans-acting function which regulated the frequency of transposition.     

IS50-mediated inverse transposition: specificity and precision

The IS50 elements, which are present as inverted repeats in the kanamycin-resistance transposon, Tn5, can move in unison carrying with them any interstitial DNA segment. In consequence, DNA molecules such as a lambda::Tn5 phage genome are composed of two overlapping transposons - the kan segment bracketed by IS50 elements (Tn5), and lambda bracketed by IS50 elements. During direct transposition, mediated by IS50 "O" (outside) ends, the kan gene is moved and the lambda vector is left behind. During inverse transposition, mediated by the "I" (inside) ends of the IS50 elements, the lambda vector segment is moved and the kan gene is left behind. Direct transposition is several orders of magnitude more frequent than inverse transposition (Isberg and Syvanen, 1981; Sasakawa and Berg, 1982). We assessed the specificity and precision of the rare events mediated by pairs of I ends by mapping and sequencing independent inverse transpositions from a lambda::Tn5 phage into the amp and tet genes of plasmid pBR322. Using restriction analyses, 32 and 40 distinct sites of insertion were found among 46 and 72 independent inverse transpositions into the amp and tet genes, respectively. Eleven sites were used in two or more insertion events, and the two sites in tet used most frequently corresponded to major hotspots for the insertion of the Tn5 (by direct transposition). The sequences of 22 sites of inverse transposition (including each of the sites used more than once) were determined, in eleven cases by analyzing both pBR322-IS50 junctions, and in eleven others by sequencing one junction. The sequence of the "I" end of IS50 was preserved and 9-bp target sequence duplications were present in every case analyzed. GC pairs were found at each end of the target sequence duplication in ten of the eleven sites used more than once, and also in seven of the other eleven sites. Our data indicate that transposition mediated by pairs of "I" ends is similar in its specificity and precision to the more frequent transposition mediated by IS50 "O" ends.     

Separate structural and functional domains of Tn4430 transposase contribute to target immunity

Like other transposons of the Tn3 family, Tn4430 exhibits target immunity, a process that prevents multiple insertions of the transposon into the same DNA molecule. Immunity is conferred by the terminal inverted repeats of the transposon and is specific to each element of the family, indicating that the transposase TnpA is directly involved in the process.However, the molecular mechanism whereby this protein promotes efficient transposition into permissive targets while preventing transposition into immune targets remains unknown. Here, we demonstrate that both functions of TnpA can be uncoupled from each other by isolating and characterizing mutants that are proficient in transposition (T+) but impaired in immunity (I-). The identified T+/I- mutations are clustered into separate structural and functional domains of TnpA, indicating that different activities of the protein contribute to immunity.Combination of separate mutations had synergistic effects on target immunity but contrasting effects on transposition. One class of mutations was found to stimulate transposition, whereas other mutations appeared to reduce TnpA activity. The data are discussed with respect to alternative models in which TnpA acts as a specific determinant to both establish and respond to immunity.     

A specific class of IS10 transposase mutants are blocked for target site interactions and promote formation of an excised transposon fragment

We report the identification and characterization of a class of IS10 transposase mutants that carry out only some of the steps required for transposition. These mutants were identified among transposition-defective mutants as a specific subclass that retains the wild-type ability to induce SOS functions in the presence of transposon ends. Mutants of this class successfully promote excision of the element from its donor site, but do not promote transfer of the transposon sequences to a target site. SOS induction presumably results from the degradation of the donor site. Uniquely among transposition-defective mutants, SOS+ Tnsp- mutants promote the formation of a new product, the excised transposon fragment (ETF), which consists of the transposon excised from the original donor molecule by double-strand breaks at the transposon ends. SOS+ Tnsp- mutants identified thus far define two patches of amino acids that might correspond to regions of different function. A single additional mutation maps within a region that is highly conserved among IS element transposases. The existence of SOS+ Tnsp- mutants and the structure of the ETF provide strong support for the previously proposed nonreplicative model of Tn10/IS10 transposition.     

Purification of TnsB, a transposition protein that binds to the ends of Tn7.

We have purified TnsB, a transposition protein encoded by the bacterial transposon Tn7. The purification procedure involves three chromatographic steps (DNA-cellulose, norleucine-Sepharose, and phosphocellulose) and yields milligram quantities of highly purified protein. The apparent molecular mass of denatured TnsB protein is approximately 85 kDa. Gel filtration chromatography and sucrose gradient sedimentation studies indicate that in solution, native TnsB is a monomer of nonspherical shape. Using DNase I protection analysis, we established that TnsB is a sequence-specific DNA-binding protein that recognizes multiple sites in both ends of the transposon. The TnsB binding sites, three in the left end of Tn7 and four in the right end, are highly related in nucleotide sequence and are located in DNA segments that we have previously shown contain cis-acting sequences important for Tn7 transposition. Our results also show that one of the TnsB binding sites overlaps a proposed promoter for the transposition genes of Tn7. These studies suggest that the specific binding of TnsB to the ends of Tn7 mediates recombination and may also regulate the expression of Tn7-encoded transposition genes.