Genetic engineering of polysaccharide structure: production of variants of xanthan gum in Xanthomonas campestris.

Xanthan gum is an extracellular heteropolysaccharide produced by the bacterium Xanthomonas campestris. Xanthan has wide commercial application as a viscosifier of aqueous solutions. Previously, through genetic engineering, a set of mutants defective in the xanthan biosynthetic pathway has been obtained. Certain mutants were shown to synthesize and polymerize structural variants of the xanthan repeating unit and thus produce "variant xanthans". Initial studies of solution viscosities of these polymers, presented here, indicate that the variants have rheological properties similar to, but not identical with, xanthan. These results indicate that acetylation and pyruvylation can affect the viscometric properties of xanthan. Specifically, the presence of pyruvate increases viscosity, whereas acetate decreases viscosity. In addition, the elimination of sugar residues from xanthan side chains also has a major effect on viscosity. Compared to wild-type xanthan, polymer lacking the terminal mannose (polytetramer) is a poor viscosifier. In contrast, polymer lacking both the terminal mannose and glucuronic acid (polytrimer) is a superior viscosifier, on a weight basis. There is a negative effect of acetylation on the viscosity of polytetramer xanthan, but there is seemingly no effect of acetylation on polytrimer xanthan viscosity. The further study of these materials should provide insight into the relationship between xanthan structure and rheological behavior.     

Sources and methods of manufacturing xanthan by fermentation of various carbon sources

Xanthan gum, an anionic polysaccharide with an exceptionally high molecular weight, is produced by the bacterium Xanthomonas sp. It is a versatile compound that has been utilized in various industries for decades. Xanthan gum was the second exopolysaccharide to be commercially produced, following dextran. In 1969, the US Food and Drug Administration (FDA) approved xanthan gum for use in the food and pharmaceutical industries. The food industry values xanthan gum for its exceptional rheological properties, which make it a popular thickening agent in many products. Meanwhile, the cosmetics industry capitalizes on xanthan gum's ability to form stable emulsions. The industrial production process of xanthan gum involves fermenting Xanthomonas in a medium that contains glucose, sucrose, starch, etc. as a substrate and other necessary nutrients to facilitate growth. This is achieved through batch fermentation under optimal conditions. However, the increasing costs of glucose in recent years have made the production of xanthan economically unviable. Therefore, many researchers have investigated alternative, cost-effective substrates for xanthan production, using various modified and unmodified raw materials. The objective of this analysis is to investigate how utilizing different raw materials can improve the cost-efficient production of xanthan gum.     

黄原胶(Xanthan Gum)的特性、生产及应用

黄原胶是野油菜黄单孢菌分泌于胞外的中性水溶性多糖。由于其独特的流变性质而有着极其广泛的工业应用。介绍了黄原胶的生产、特性、降解以及应用,并对其应用潜力作了预测。     

Valorisation of chicken feathers for xanthan gum production using Xanthomonas campestris MO-03

Xanthan gum is an important commercial polysaccharide produced by Xanthomonas species. In this study, xanthan production was investigated using a local isolate of Xanthomonas campestris MO-03 in medium containing various concentrations of chicken feather peptone (CFP) as an enhancer substrate. CFP was produced with a chemical process and its chemical composition was determined. The addition of CFP (1–8?g/l) increased the conversion of sugar to xanthan gum in comparison with the control medium, which did not contain additional supplements. The highest xanthan production (24.45?g/l) was found at the 6?g/l CFP containing control medium in 54?h. This value was 1.73 fold higher than that of control medium (14.12?g/l). Moreover, addition of CFP improved the composition of xanthan gum; the pyruvate content of xanthan was 3.86% (w/w), higher than that of the control (2.2%, w/w). The xanthan gum yield was also influenced by the type of organic nitrogen sources. As a conclusion, CFP was found to be a suitable substrate for xanthan gum production.     

改性黄原胶酯化条件的优化及结构的表征

为了提高黄原胶的速溶性和粘度,将黄原胶进行改性处理。将黄原胶与马来酸酐进行酯化反应,探讨了黄原胶与马来酸酐摩尔比、反应时间和反应温度等因素的影响,以取代度为指标,利用响应面方法确定,该酯化反应的最优条件为:黄原胶与马来酸酐摩尔比1∶11.5、反应时间24.4 h、反应温度66℃。对改性黄原胶进行红外光谱、光散射和X-射线衍射等结构表征,表明酯化改性成功,且进一步解释了速溶性和粘度提高的原因。改性黄原胶细胞毒性实验,显示无毒性。结果表明,改性黄原胶的速溶性和粘度有很大提高,0.2%改性黄原胶的速溶性和粘度较对照提高了近3倍,在食品、药品等领域具有潜在的应用价值。     

Water-soluble polymers in agriculture: xanthan gum as eco-friendly alternative to synthetics

Water-soluble polymers (WSPs) are a versatile group of chemicals used across industries for different purposes such as thickening, stabilizing, adhesion and gelation. Synthetic polymers have tailored characteristics and are chemically homogeneous, whereas plant-derived biopolymers vary more widely in their specifications and are chemically heterogeneous. Between both sources, microbial polysaccharides are an advantageous compromise. They combine naturalness with defined material properties, precisely controlled by optimizing strain selection, fermentation operational parameters and downstream processes. The relevance of such bio-based and biodegradable materials is rising due to increasing environmental awareness of consumers and a tightening regulatory framework, causing both solid and water-soluble synthetic polymers, also termed ‘microplastics’, to have come under scrutiny. Xanthan gum is the most important microbial polysaccharide in terms of production volume and diversity of applications, and available as different grades with specific properties. In this review, we will focus on the applicability of xanthan gum in agriculture (drift control, encapsulation and soil improvement), considering its potential to replace traditionally used synthetic WSPs. As a spray adjuvant, xanthan gum prevents the formation of driftable fine droplets and shows particular resistance to mechanical shear. Xanthan gum as a component in encapsulated formulations modifies release properties or provides additional protection to encapsulated agents. In geotechnical engineering, soil amended with xanthan gum has proven to increase water retention, reduce water evaporation, percolation and soil erosion – topics of high relevance in the agriculture of the 21st century. Finally, hands-on formulation tips are provided to facilitate exploiting the full potential of xanthan gum in diverse agricultural applications and thus providing sustainable solutions.     

Improved shake-flask test for the screening of xanthan-producing microorganisms

Baffled 500 ml Erlenmeyer flasks were compared with conventional 2800 ml Fernbach flasks forXanthomonas campestris to produce xanthan. Bacterial growth rates were similar in both types of flask although the Fernbach flasks gave higher biomass concentrations. Xanthan production was similar in both types of flasks but different viscosities were attained. On a weight basis, the xanthan produced in baffled flasks was up to three times more viscous and more pseudoplastic or shear thinning. For screening purposes, baffled flasks are better because the rheological quality of the gum produced in them is more like that obtained in stirred fermentors than the gum from Fernbach flasks and considerably less shaker space is required, thus allowing a larger number of tests to be performed.     

Synthetic media for production of quality xanthan gum in 20 liter fermentors

Xanthan gum is a heteropolysaccharide synthesized by Xanthomonas campestris NRRL B-1459 and is composed of D -glucose, D -mannose, and D -glucuronic acid, in addition to acetic and pyruvic acids. Different amounts of pyruvic acid ketal are found in various preparations which can influence the viscosities of dilute xanthan solutions. Polysaccharide production on synthetic media was studied in small-scale fermentors. Fermentation conditions were established for production of both high and low pyruvic acid gums (about 4 and 2% pyruvic acid, respectively). Low nitrogen [0.1% (NH₄)₂HPO₄] and air (0.25 vol/liter/min) levels favor production of low pyruvate gum; increasing (NH₄)₂HPO₄ to 0.15%, adding K₂HPO₄, and increasing the air flow to 1.5 vol/liter/min favored production of normal gum. Both processes gave xanthan yields of 50 to 60%, based on 2.5% initial D -glucose substrate, in two to three days. Differences in pyruvic acid content and in the quantity of gum produced under a given set of conditions were attributed to strain variability. Substrains were isolated that have desirable characteristics for production of xanthan gum; i.e., the ability to give good yields of high-pyruvate gum when grown on both complex and synthetic media.     

Physicochemical and structural characterization of a polyionic matrix of interest in biotechnology, in the pharmaceutical and biomedical fields

This paper reports on the swelling degree and the rheological and structural characteristics of a hydrogel composed by chitosan and xanthan. The latter is a polyionic hydrogel obtained by complexation between the both polysaccharides. The swelling degree has been found to be influenced by the time of coacervation, the pH of the solution of chitosan used to form the hydrogel and the pH of the swelling solution. The molecular weight and the degree of acetylation of the chitosan also influence the swelling degree of this matrix. The connectivity between chitosan and xanthan affects the swelling degree of this matrix. A rheological study has been carried out in order to understand the formation of the coacervate and of the subsequent hydrogel. The evolution of the storage modulus with time during the coacervation has allowed to optimize the time of coacervation required for a subsequently hydrogel, with desirable swelling degree. The kinetics has shown that (a) the coacervate is formed in two distinct steps and (b) the storage modulus of the hydrogel reaches a stable plateau. The values of the storage modulus have been correlated with the swelling degree. The microscopic characterization has shown the presence of a porous network with a fibrillar structure. To complete the characterization studies fine powder of this hydrogel has been used to determine the surface, perimeter, Feret diameter and sphericity factor distribution of dry and hydrated (swollen) particles.     

Xanthan production by Xanthomonas campestris using whey permeate medium

Xanthan gum is a polysaccharide that is widely used as stabilizer and thickener with many industrial applications in food industry. Our aim was to estimate the ability of Xanthomonas campestris ATCC 13951 for the production of xanthan gum by using whey as a growth medium, a by-product of dairy industry. X. campestris ATCC 13951 has been studied in batch cultures using a complex medium for the determination of the optimal concentration of glucose, galactose and lactose. In addition, whey was used under various treatment procedures (de-proteinated, partially hydrolyzed by β-lactamase and partially hydrolyzed and de-proteinated) as culture medium, to study the production of xanthan in a 2 l bioreactor with constant stirring and aeration. A production of 28 g/l was obtained when partially hydrolysed β-lactamase was used, which proved to be one of the highest xanthan gum production reported so far. At the same time, an effort has been made for the control and selection of the most appropriate procedure for the preservation of the strain and its use as inoculant in batch cultures, without loss of its viability and its capability of xanthan gum production. The pre-treatment of whey (whey permeate medium hydrolyzed, WPH) was very important for the production of xanthan by the strain X. campestris ATCC 13951 during batch culture conditions in a 2 l bioreactor. Preservation methods such as lyophilization, cryopreservation at various glycerol solution and temperatures have been examined. The results indicated that the best preservation method for the producing strain X. campestris ATCC 13951 was the lyophilization. Taking into account that whey permeate is a low cost by-product of the dairy industry, the production of xanthan achieved under the studied conditions was considered very promising for industrial application.     

Rheology of hydroxyethyl guar gum derivatives

The rheological properties of aqueous solutions of hydroxyethyl guar gum, a synthetic derivative of guar gum, have been studied under continuous and oscillatory shear flow conditions. Data obtained from both experimental techniques were satisfactorily fitted according to Cross-type models. The effect of polymer concentration, molecular weight and temperature on the rheological behavior of hydroxyethyl guar gum systems have been investigated and discussed in terms of rheological parameters like the zero-shear viscosity η₀ and the characteristic times λ and λ′.     

Kinetic analysis of growth and xanthan gum production with Xanthomonas campestris on sucrose, using sequentially consumed nitrogen sources

A batch fermentation strategy using Xanthomonas campestris ATCC 13951 for xanthan gum production has been established in which all essential medium components are supplied at the onset. This has been achieved using sucrose as sole sugar feedstock. Sequential consumption of nitrogen sources (soybean hydrolysates, ammonium and nitrate salts) was observed to facilitate the further optimisation of the medium. Biomass accumulation was limited by phosphate availability. Xanthan yields of more than 60% (grams of xanthan per gram of sugar) have been obtained with constant acetyl content. However, pyruvyl substitution decreased as the growth rate declined, due to the metabolic constraints specific to phosphate depletion. High rates of carbon conversion into xanthan were observed throughout the culture and the ATP/ADP ratio was not affected by the decline in the specific growth rate.     

Studies on xanthan production from Xanthomonas campestris

Xanthan is an heteropolysaccharide produced by Xanthomonascampestris. Xanthan gum fermentation by a local isolate of X. campestris using different carbon sources was studied. The production of polysaccharide was influenced by the carbon source used. The production of the xanthan was 15.654 g/l with synthetic medium. Production of xanthan at various temperatures ranging between 25v°C and 40v°C was studied. The growth and production was maximum between 25-30v°C. Xanthan production was maximum at pH 7.0-7.5.     

Inter- and Intra-Manufacturer Variability in Pharmaceutical Grades and Lots of Xanthan Gum

A pharmaceutical formulation typically contains one or more excipients in addition to the active pharmaceutical ingredient(s). Though excipients have been considered inert components of a formulation, variability in their properties has been shown to affect the performance of drug dosage forms and delivery systems. This study investigates the inter- and intra-manufacturer variability among different NF grades and lots of xanthan gum made by two manufacturers. As many formulators rely on compendial standards to monitor and control the variability of excipients, this study focuses on the adequacy of the NF specifications, in particular the viscosity specification, to discern the variability in solution properties of different pharmaceutical grades and lots of xanthan gum. All the grades and lots in this study were NF grade materials. Xanthan gum solutions were prepared in accordance with NF test methodology and were rheologically evaluated using a rotational rheometer. Both steady shear measurements and small amplitude oscillatory measurements were carried out on 1% w/w xanthan gum solutions. Results showed significant inter- and intra-manufacturer variability among the NF grades and lots of xanthan gum that was not reflected in the NF viscosity test specifications.     

Microscopy of xanthan/galactomannan mixtures

Polarization microscopy has been used to investigate the structure of 50/50 xanthan/galactomannan (guar gum or locust bean gum) mixtures in aqueous solution, the total concentration ranging from 0.5 to 4%. By the use of polarized light microscopy birefringent areas resulting from the formation of cholesteric mesophases in xanthan gum was clearly seen as has previously been reported by several authors. In xanthan/galactomannan mixtures, we also observed birefringent areas. Moreover, these zones in the blend appeared more anisotropic than with xanthan gum alone. This suggests that xanthan molecules organize themselves as liquid crystalline mesophases in definite enriched xanthan areas resulting from a concentration of xanthan inside these birefringent zones. Upon heating, this anisotropy disappears at a temperature well below the helix-coil transition temperature of xanthan molecules. In fact, this loss of order of the mixed system occurs at the same temperature as the melting temperature of the gel, as assessed by the use of rheological measurements. Since the ordered helical structure of the xanthan molecules still exists beyond the melting temperature while anisotropy disappears, this suggests that the xanthan molecules are no longer concentrated in specific areas but more evenly distributed in the medium. Gel melting would, therefore, be the result of the disappearance of these xanthan enriched areas.     

Functional characterization of GumK, a membrane-associated beta-glucuronosyltransferase from Xanthomonas campestris required for xanthan polysaccharide synthesis

Xanthomonas campestris is a Gram-negative bacterium that produces an exopolysaccharide known as xanthan gum. Xanthan is involved in a variety of biological functions, including pathogenesis, and is widely used in the industry as thickener and viscosifier. Although the genetics and biosynthetic process of xanthan are well documented, the enzymatic components have not been examined and no data on glycosyltransferases have been reported. We describe the functional characterization of the gumK gene product, an essential protein for xanthan synthesis. Immunoblots and complementation studies showed that GumK is a 44-kDa protein associated to the membrane fraction. This value corresponds to the expected molecular mass for GumK encoded by an extended open reading frame than proposed from previous genetic data and in X. campestris published complete genome. The protein was expressed in Escherichia coli cells. The purified protein catalyzed the transfer of a glucuronic acid residue from UDP-glucuronic acid to mannose-alpha-1,3-glucose-beta-1,4-glucose-P-P-polyisoprenyl with formation of a glucuronic acid-beta-mannose linkage. We examined the acceptor substrate specificity. GumK was unable to use the trisaccharide acceptor freed from the pyrophosphate lipid moiety. Replacement of the natural lipid moiety by phytanyl showed that the catalytic function could proceed with glucuronic acid transfer. These results suggest the enzyme does not show specificity for the lipidic portion of the acceptor. GumK showed diminished activity when tested with 6-O-acetyl-mannose-alpha-1,3-glucose-beta-1,4-glucose-P-P-polyisoprenyl, a putative intermediate in the synthesis of xanthan. This could indicate that acetylation of the internal mannose takes place after the formation of the GumK product.     

黄原胶降解菌BIT-BJ001培养条件的优化

黄原胶在采油工程中有重要的应用,但其难降解性质给采油工程带来很多问题。从塔里木油田胡杨木根部样品中分离得到1株黄原胶降解菌BIT-BJ001,对其发酵条件的研究表明,此黄原胶降解菌最适培养条件为:黄原胶0.3%,酵母粉0.5%,Na+浓度0.8%,Mg2+浓度0.8%,初始pH值为10,温度60℃。菌种BIT-BJ001降解黄原胶的能力与发酵时间、发酵液中还原糖浓度有关,发酵96 h,黄原胶降粘率达到最高,发酵液中还原糖浓度过高,将抑制菌株对黄原胶的降解。     

Xanthan gum: an economical substitute for agar in plant tissue culture media

Xanthan gum, a microbial desiccation-resistant polysaccharide prepared commercially by aerobic submerged fermentation from Xanthomonas campestris, has been successfully used as a solidifying agent for plant tissue culture media. Its suitability as a substitute to agar was demonstrated for in vitro seed germination, caulogenesis and rhizogenesis of Albizzia lebbeck, androgenesis in anther cultures of Datura innoxia, and somatic embryogenesis in callus cultures of Calliandra tweedii. Culture media used for eliciting these morphogenic responses were gelled with either 1% xanthan gum or 0.9% agar. Xanthan gum, like agar, supported all these responses.     

Exopolysaccharide production by Streptococcus thermophilus SY: production and preliminary characterization of the polymer

AIMS: To evaluate the effect of yeast extract (YE) concentration, temperature and pH on growth and exopolysaccharide (EPS) production in a whey-based medium by Streptococcus thermophilus SY and to characterize the partially purified EPS. METHODS AND RESULTS: Factorial experiments and empirical model building were used to optimize fermentation conditions and the chemical composition, average molecular weight (MW) and rheological properties of aqueous dispersions of the EPS were determined. Exopolysaccharide production was growth associated and was higher (152 mg l(-1)) at pH 6.4 and 36 degrees C with 4 g l(-1) YE. High performance size exclusion chromatography of the partially purified EPS showed two peaks, with a weight average MW of 2 x 10(6) and 5 x 10(4), respectively. The EPS was a heteropolysaccharide, with a glucose : galactose : rhamnose ratio of 2 : 4.5 : 1. Its water dispersions had a pseudoplastic behaviour and showed a higher viscosity of xanthan solutions. SIGNIFICANCE AND IMPACT OF THE STUDY: The fermentation conditions and some properties of an EPS produced by Strep. thermophilus, a dairy starter organism, were described.     

Preservation of Xanthomonas campestris on agar slopes: effects on xanthan production

Xanthomonas campestris NRRL B-1459 and a variant E2, when preserved on agar slopes (transferred monthly) over 11 months did not deteriorate in their ability to produce xanthan in quantity and quality, as determined by culture in 500-ml baffled flasks. Variations between 8 and 14% (with respect to the average) in the final xanthan concentration were observed for the E2 and B-1459 strains, respectively. A wide range of final viscosities was obtained; these were consistent with the changes in gum concentration. Differences were more likely associated with differences in fermentation kinetics rather than being inherent to the strains. The rheological quality of both polysacharides was relatively constant throughout the time of culture maintenance. Preservation of these bacteria on agar slopes was an adequate method, in contrast to previous reports. In the period studied, strain E2 produced higher gum titres and slightly lower gum quality compared to strain B-1459. Correspondence to: E. Galindo