Design and optimization of effector-activated ribozyme ligases

A selected ribozyme ligase, L1, has been engineered to respond to small organic effectors. Residues important for ribozyme catalysis were mapped to a compact core structure. Aptamers that bound adenosine and theophylline were appended to the core structure, and the resultant aptazymes proved to be responsive to their cognate effectors. Rational sequence substitutions in the joining region between the aptamer and the ribozyme yielded aptazymes whose activities were enhanced from 800–1600-fold in the presence of 1 mM ATP or theophylline, respectively. However, when an anti-flavin aptamer was appended to the core ribozyme structure flavin-responsivity was minimal. The joining region between the aptamer and the ribozyme core was randomized and a series of negative and positive selection steps yielded aptazymes that were activated by up to 260-fold in the presence of 100 µM FMN. The selected joining regions proved to be ‘communication modules’ that could be used to join other aptamers to the ribozyme core to form aptazymes. These results show that ribozyme ligases can be readily engineered to function as allosteric enzymes, and reveal that many of the techniques and principles previously demonstrated during the development of hammerhead aptazymes may be generalizable.     

In vitro selection of ribozymes dependent on peptides for activity

A peptide-dependent ribozyme ligase (aptazyme ligase) has been selected from a random sequence population based on the small L1 ligase. The aptazyme ligase is activated > 18,000-fold by its cognate peptide effector, the HIV-1 Rev arginine-rich motif (ARM), and specifically recognizes the Rev ARM relative to other peptides containing arginine-rich motifs. Moreover, the aptazyme ligase can preferentially recognize the Rev ARM in the context of the full-length HIV-1 Rev protein. The only cross-reactivity exhibited by the aptazyme is toward the Tat ARM. Reselection of peptide- and protein-dependent aptazymes from a partially randomized population yielded aptazymes that could readily discriminate against the Tat ARM. These results have important implications for the development of aptazymes that can be used in arrays for the detection and quantitation of multiple cellular proteins (proteome arrays).     

Simultaneous detection of diverse analytes with an aptazyme ligase array

Allosteric ribozymes (aptazymes) can transduce the noncovalent recognition of analytes into the catalytic generation of readily observable signals. Aptazymes are easily engineered, can detect diverse classes of biologically relevant molecules, and have high signal-to-noise ratios. These features make aptazymes useful candidates for incorporation into biosensor arrays. Allosteric ribozyme ligases that can recognize a variety of analytes ranging from small organics to proteins have been generated. Upon incorporation into an array format, multiple different aptazyme ligases were able to simultaneously detect their cognate analytes with high specificity. Analyte concentrations could be accurately measured into the nanomolar range. The fact that analytes induced the formation of new covalent bonds in aptazyme ligases (as opposed to noncovalent bonds in antibodies) potentiated stringent washing of the array, leading to improved signal-to-noise ratios and limits of detection.     

Leakage and slow allostery limit performance of single drug-sensing aptazyme molecules based on the hammerhead ribozyme

Engineered “aptazymes” fuse in vitro selected aptamers with ribozymes to create allosteric enzymes as biosensing components and artificial gene regulatory switches through ligand-induced conformational rearrangement and activation. By contrast, activating ligand is employed as an enzymatic cofactor in the only known natural aptazyme, the glmS ribozyme, which is devoid of any detectable conformational rearrangements. To better understand this difference in biosensing strategy, we monitored by single molecule fluorescence resonance energy transfer (FRET) and 2-aminopurine (AP) fluorescence the global conformational dynamics and local base (un)stacking, respectively, of a prototypical drug-sensing aptazyme, built from a theophylline aptamer and the hammerhead ribozyme. Single molecule FRET reveals that a catalytically active state with distal Stems I and III of the hammerhead ribozyme is accessed both in the theophylline-bound and, if less frequently, in the ligand-free state. The resultant residual activity (leakage) in the absence of theophylline contributes to a limited dynamic range of the aptazyme. In addition, site-specific AP labeling shows that rapid local theophylline binding to the aptamer domain leads to only slow allosteric signal transduction into the ribozyme core. Our findings allow us to rationalize the suboptimal biosensing performance of the engineered compared to the natural aptazyme and to suggest improvement strategies. Our single molecule FRET approach also monitors in real time the previously elusive equilibrium docking dynamics of the hammerhead ribozyme between several inactive conformations and the active, long-lived, Y-shaped conformer.     

Coupling between substrate binding and allosteric regulation in ribozyme catalysis

The contribution of substrate binding to allosteric regulation in the ribozyme catalysis has been investigated using allosteric ribozymes consisting of the hammerhead ribozyme and a flavin mononucleotide (FMN) aptamer. Kinetic parameters were measured for various lengths of the substrates with a wide range of binding energy. The maximum cleavage rate of each ribozyme was retained with the long substrates. However, the cleavage rates largely decreased by the truncation of the substrates according to loss in the free energy of substrate binding. The high sensitivity to the substrate lengths is attributed to the increase in the energetic requirement for the catalytic core folding, which is caused by the incorporation of the aptamer region. One role of FMN binding is assisting the promotion of the core folding through the stabilization of the aptamer domain. The allosteric effect is significantly expressed only when the substrate binding energy is insufficient for the core folding of the ribozyme-substrate complex. This type of allosteric interaction dominates the substrate dependency of another type of regulation. These results demonstrate that an adequate correlation between the type of regulation and the substrate binding is responsible for the effective allosteric interaction in the kinetic process.     

Reversible photo-regulation of a hammerhead ribozyme using a diffusible effector

The potential utility of catalytic RNAs and DNAs (ribozymes and deoxyribozymes, respectively) as reagents in molecular biology as well as therapeutic agents for a variety of human diseases, has long been recognized. Although naturally occurring RNA-cleaving ribozymes are typically not subject to feedback control, rational methodologies for the creation of allosteric ribozymes, by functional combination of ribozyme and ligand-responsive aptamer RNA elements, have existed for some years. Here, we report the in vitro selection of RNA aptamers specific for binding one but not the other of two light-induced isomers of a dihydropyrene photo-switch compound, and the utilization of such an aptamer for the construction of the UG-dihydropyrene ribozyme, an allosteric hammerhead ribozyme whose catalysis is controllable by irradiation with visible versus ultraviolet light. In the presence of micromolar concentrations of the photo-switch compound, the ribozyme behaves as a two-state switch, exhibiting a >900-fold difference in catalytic rates between the two irradiation regimes. We anticipate that the UG-dihydropyrene, and other ribozymes like it, may find significant application in the developmental biology of model organisms such as Drosophila melanogaster and Caenorhabditis elegans, as well as in the biomedical sciences.     

Synthetic riboswitches for external regulation of genes transferred by replication-deficient and oncolytic adenoviruses

Therapeutic gene transfer by replication-defective viral vectors or, for cancer treatment, by replication-competent oncolytic viruses shows high promise for treatment of major diseases. To ensure safety, timing or dosing in patients, external control of therapeutic gene expression is desirable or even required. In this study, we explored the potential of artificial aptazymes, ligand-dependent self-cleaving ribozymes, as an innovative tool for regulation of therapeutic gene expression. Importantly, aptazymes act on RNA intrinsically, independent of regulatory protein–nucleic acid interactions and stoichiometry, are non-immunogenic and of small size. These are key advantages compared with the widely used inducible promoters, which were also reported to lose regulation at high copy numbers, e.g. after replication of oncolytic viruses. We characterized aptazymes in therapeutic gene transfer utilizing adenovectors (AdVs), adeno-associated vectors (AAVs) and oncolytic adenoviruses (OAds), which are all in advanced clinical testing. Our results show similar aptazyme-mediated regulation of gene expression by plasmids, AdVs, AAVs and OAds. Insertion into the 5′-, 3′- or both untranslated regions of several transgenes resulted in ligand-responsive gene expression. Notably, aptazyme regulation was retained during OAd replication and spread. In conclusion, our study demonstrates the fidelity of aptazymes in viral vectors and oncolytic viruses and highlights the potency of riboswitches for medical applications.     

Competitive regulation of modular allosteric aptazymes by a small molecule and oligonucleotide effector

The hairpin ribozyme can catalyze the cleavage of RNA substrates by employing its conformational flexibility. To form a catalytic complex, the two domains A and B of the hairpin-ribozyme complex must interact with one another in a folding step called docking. We have constructed hairpin ribozyme variants harboring an aptamer sequence that can be allosterically induced by flavin mononucleotide (FMN). Domains A and B are separated by distinct bridge sequences that communicate the formation of the FMN-aptamer complex to domains A and B, facilitating their docking. In the presence of a short oligonucleotide that is complementary to the aptamer, catalytic activity of the ribozyme is completely abolished, due to the formation of an extended conformer that cannot perform catalysis. However, in the presence of the small molecule effector FMN, the inhibitory effect of the oligonucleotide is competitively neutralized and the ribozyme is activated 150-fold. We thus have established a new principle for the regulation of ribozyme catalysis in which two regulatory factors (an oligonucleotide and a small molecule) that switch the ribozyme's activity in opposite directions compete for the same binding site in the aptamer domain.     

Design of allosteric hammerhead ribozymes activated by ligand-induced structure stabilization.

BACKGROUND: Ribozymes can function as allosteric enzymes that undergo a conformational change upon ligand binding to a site other than the active site. Although allosteric ribozymes are not known to exist in nature, nucleic acids appear to be well suited to display such advanced forms of kinetic control. Current research explores the mechanisms of allosteric ribozymes as well as the strategies and methods that can be used to create new controllable enzymes. RESULTS: In this study, we exploit the modular nature of certain functional RNAs to engineer allosteric ribozymes that are activated by flavin mononucleotide (FMN) or theophylline. By joining an FMN- or theophylline-binding domain to a hammerhead ribozyme by different stem II elements, we have identified a minimal connective bridge comprised of a G.U wobble pair that is responsive to ligand binding. Binding of FMN or theophylline to its allosteric site induces a conformational change in the RNA that stabilizes the wobble pair and ultimately favors the active form of the catalytic core. These ligand-sensitive ribozymes exhibit rate enhancements of more than 100-fold in the presence of FMN and of approximately 40-fold in the presence of theophylline. CONCLUSIONS: An adaptive strategy for modular rational design has proven to be an effective approach to the engineering of novel allosteric ribozymes. This strategy was used to create allosteric ribozymes that function by a mechanism involving ligand-induced structure stabilization. Conceivably, similar engineering strategies and allosteric mechanisms could be used to create a variety of novel allosteric ribozymes that function with other effector molecules.     

Allosteric regulation of a ribozyme activity through ligand-induced conformational change.

An allosteric ribozyme has been designed using the hammerhead ribozyme as the active site and aflavin-specific RNA aptamer as a regulatory site. We constructed six variants with a series of base pairs in the linker region (stem II). Under single turnover conditions, kinetic studies were carried out in the absence and presence of flavin mononucleotide (FMN). Interestingly, FMN addition did not influence the cleavage rate of constructs with a 5-6 bp linker but stimulated the catalytic activity of those bearing a shorter linker. In particular, the apparent k cat of Rz3 increases by approximately 10-fold upon addition of saturating amounts of FMN. To determine the rate constants( K m4and k cat), the ribozyme regulated most effectively by FMN was further investigated. FMN mainly affected the k cat value, reflecting the rate limiting conformational change step of the overall cleavage reaction, depending on helix formation in stem II. Probably, FMN influences the orientation of structures necessary for the cleavage reaction through stem II formation. The result of chemical modification revealed that binding of FMN to the aptamer domain induced the helix formation in stem II required for catalytic activity. Therefore, a specific FMN-mediated allosteric interaction seems to promote a conformational alteration from an open to a closed structure in stem II. The concept of conformational modification in the allosteric effect is consistent with other allosteric enzymes, suggesting that such a conformational change is a fundamental feature of allosteric enzymes in biological systems.     

Selection of tetracycline inducible self-cleaving ribozymes as synthetic devices for gene regulation in yeast

Synthetic regulatory devices are key components for the development of complex biological systems and the reprogramming of cellular functions and networks. Here we describe the selection of tetracycline inducible hammerhead ribozymes. A tetracycline aptamer was fused to the full-length hammerhead ribozyme via a variable linker region. 11 rounds of in vitro selection were applied to isolate linker sequences that mediate tetracycline dependent hammerhead cleavage. We identified allosteric ribozymes that cleave in the presence of 1 μM tetracycline as fast as the full-length ribozyme whereas cleavage is inhibited up to 333-fold in the absence of tetracycline. Reporter gene assays indicate that the allosteric ribozymes can be employed to control gene expression in yeast.     

Bis-aptazyme sensors for hepatitis C virus replicase and helicase without blank signal

The fusion molecule (i.e. aptazyme) of aptamer and hammerhead ribozyme was developed as in situ sensor. Previously, the hammerhead ribozyme conjugated with aptamer through its stem II module showed a significant blank signal by self-cleavage. To reduce or remove its self-cleavage activity in the absence of target molecule, rational designs were attempted by reducing the binding affinity of the aptazyme to its RNA substrate, while maintaining the ribonuclease activity of the aptazyme. Interestingly, the bis-aptazymes which comprise the two aptamer-binding sites at both stem I and stem III of the hammerhead ribozyme showed very low blank signals, and their ratios of reaction rate constants, i.e. signal to noise ratios, were several tens to hundred times higher than those of the stem II-conjugated bis-aptazymes. The reduction in the blank signals seems to be caused by a higher dissociation constant between the main strand of the bis-aptazyme and its substrate arising from multi-point base-pairing of the bis-aptazymes. The bis-aptazymes for HCV replicase and helicase showed high selectivity against other proteins, and a linear relationship existed between their ribozyme activities and the target concentrations. In addition, a bis-aptazyme of dual functions was designed by inserting both aptamers for HCV replicase and helicase into the stem I and stem III of hammerhead ribozyme, respectively, and it also showed greater sensitivity and specificity for both proteins without blank signal.     

Mechanism for allosteric inhibition of an ATP-sensitive ribozyme.

We report the structural basis for the modulation of an ATP-sensitive ribozyme that was engineered by modular rational design. This allosteric ribozyme is composed of two independently functioning domains, one a receptor for ATP and the other a self-cleaving ribozyme. When fused in the appropriate fashion, the conjoined aptamer-ribozyme construct functions as an allosteric ribozyme that is inhibited in the presence of ATP. The aptamer domain remains conformationally heterogeneous in the absence of ATP, but folds into a distinct structure upon ligand binding. This ATP-induced conformational change causes a reduction in catalytic activity of the adjacent ribozyme domain due to steric interference between the aptamer and ribozyme tertiary structures. This mechanism for structural and functional modulation of nucleic acids is one of several possible mechanisms by which the function of ribozymes could be specifically controlled by small effector molecules.     

In vitro selection of sialic acid specific RNA aptamer and its application to the rapid sensing of sialic acid modified sugars

Sialic acids (SAs) are located on the terminal positions of glycan on a cell surface, which play important role in the spread and metastasis of cancer cells and infection of pathogen. For their detection and diagnosis, the finding of SA specific ligand is an essential prerequisite. Here, RNA aptamer for N‐acetylneuraminic acid (Neu5Ac), a representative of SAs, with the high affinity of 1.35 nM and the selectivity was screened by in vitro selection method. The strong binding of the screened aptamer was enough to protect the hydrolysis of Neu5Ac by neuraminidase with the stoichiometry of 1:1 molar ratio. For the rapid detection of SAs, the RNA aptamer was further engineered to the aptazyme sensor by conjugating with a ribozyme following the characterization of selected aptamer by RNase footprinting assay. Without additional desialylation, modification, or/and purification processes, the aptazyme indicated high catalytic activities in the presence of Neu5Ac over 20 µM in several minutes. Also, we observed that the aptazyme sensor shows high sensitivities to Neu5Ac‐conjugated sugars as well as Neu5Ac monomer, but not in non‐Neu5Ac modified sugars. The aptamer for Neu5Ac can support valuable tools in a wide range of bioanalytical applications as well as biosensors. Biotechnol. Bioeng. 2013; 110: 905–913. © 2012 Wiley Periodicals, Inc.     

Selective cleavage of bcr-abl chimeric RNAs by a ribozyme targeted to non-contiguous sequences.

Conventionally designed ribozymes may be unable to cleave RNA at sites which are inaccessible due to secondary structure. In addition, it may also be difficult to specifically target a conventionally designed ribozyme to some chimeric RNA molecules. Novel approaches for ribozyme targeting were developed by using the L6 bcr-abl fusion RNA as a model. Using one approach, we successfully directed ribozyme nucleation to a site on the bcr-abl RNA that is distant from the GUA cleavage site. These ribozymes bound to the L6 substrate RNA via an anchor sequence that was complementary to bcr sequences. The anchor was necessary for efficient cleavage as the anchor minus ribozyme, a conventionally designed ribozyme, was inefficient at catalyzing cleavage at this same site. The effect of anchor sequences on catalytic rates was determined for two of these ribozymes. Ribozymes generated by a second approach were designed to cleave at a CUU site in proximity to the bcr-abl junction. Both approaches have led to the development of a series of ribozymes specific for both the L6 and K28 bcr-abl chimeric RNAs, but not normal abl or bcr RNAs. The specificity of the ribozyme correlated in part with the ability of the ribozyme to bind substrate as demonstrated by gel shift analyses. Secondary structure predictions for the RNA substrate support the experimental results and may prove useful as a theoretical basis for the design of ribozymes.     

Engineering a ribozyme cleavage-induced split fluorescent aptamer complementation assay

Hammerhead ribozymes are self-cleaving RNA molecules capable of regulating gene expression in living cells. Their cleavage performance is strongly influenced by intra-molecular loop–loop interactions, a feature not readily accessible through modern prediction algorithms. Ribozyme engineering and efficient implementation of ribozyme-based genetic switches requires detailed knowledge of individual self-cleavage performances. By rational design, we devised fluorescent aptamer-ribozyme RNA architectures that allow for the real-time measurement of ribozyme self-cleavage activity in vitro. The engineered nucleic acid molecules implement a split Spinach aptamer sequence that is made accessible for strand displacement upon ribozyme self-cleavage, thereby complementing the fluorescent Spinach aptamer. This fully RNA-based ribozyme performance assay correlates ribozyme cleavage activity with Spinach fluorescence to provide a rapid and straightforward technology for the validation of loop–loop interactions in hammerhead ribozymes.     

The effect of structure in a long target RNA on ribozyme cleavage efficiency.

Inhibition of gene expression by catalytic RNA (ribozymes) requires that ribozymes efficiently cleave specific sites within large target RNAs. However, the cleavage of long target RNAs by ribozymes is much less efficient than cleavage of short oligonucleotide substrates because of higher order structure in the long target RNA. To further study the effects of long target RNA structure on ribozyme cleavage efficiency, we determined the accessibility of seven hammerhead ribozyme cleavage sites in a target RNA that contained human immunodeficiency virus type 1 (HIV-1) vif - vpr . The base pairing-availability of individual nucleotides at each cleavage site was then assessed by chemical modification mapping. The ability of hammerhead ribozymes to cleave the long target RNA was most strongly correlated with the availability of nucleotides near the cleavage site for base pairing with the ribozyme. Moreover, the accessibility of the seven hammerhead ribozyme cleavage sites in the long target RNA varied by up to 400-fold but was directly determined by the availability of cleavage sites for base pairing with the ribozyme. It is therefore unlikely that steric interference affected hammerhead ribozyme cleavage. Chemical modification mapping of cleavage site structure may therefore provide a means to identify efficient hammerhead ribozyme cleavage sites in long target RNAs.     

Expression mechanism of the allosteric interactions in a ribozyme catalysis.

The contribution of substrate binding to cooperative regulation in the rate process of ribozyme catalysis has been investigated using allosteric ribozymes. The high sensitivity to the substrate lengths is attributed to the catalytic core folding which proceeds due to the energetic contribution of the substrate binding. One role of the effector (FMN) is the promotion of the core folding through the stabilization of the aptamer domain. Another role is the inhibition of the cleavage chemistry by perturbing the intermediate state in the rate process. The total effects of these two types of kinetic regulation determine the substrate dependency of the cooperative interaction on the catalytic reaction. An adequate correlation between the type of regulation and the substrate binding is responsible for the cooperative interaction in the kinetic process.     

A hammerhead ribozyme substrate and reporter for in vitro kinetoplastid RNA editing

Current in vitro assays for RNA editing in kinetoplastids directly examine the products generated by incubation of pre-mRNA substrate with guide RNA (gRNA) and mitochondrial (mt) extract. RNA editing substrates that are modeled on hammerhead ribozymes were designed with catalytic cores that contained or lacked additional uridylates (Us). They proved to be sensitive reporters of editing activity when used for in vitro assays. A deletion editing substrate that is based on A6 pre-mRNA had no ribozyme activity, but its incubation with gRNA and mt extract resulted in its deletion editing and production of a catalytically active ribozyme. Hammerhead ribozymes are thus sensitive tools to assay in vitro RNA editing.