Water Flow Through Vessel Perforation Plates--The Effects of Plate Angle and Thickness for Liriodendron tulipifera

The effects of scalariform perforation plate thickness and anglewithin vessel elements of Liriodendron tulipifera were studiedwith a computational fluid dynamical model. The pressure gradientand hence resistance to flow through the plate increased asthe perforation plate increased in thickness. Increasing theangle of the plate relative to the axis of the vessel (samenumber of pores) also increased the pressure gradient alongthe modelled cell. For the model matching the actual vesselelement, the plate contributed 8% to the flow resistance ofthe vessel element. This contribution increased only to 11%for doubled plate thickness, and to 14% for a plate at an angleof 60° to the vessel axis. The perforation plate alteredthe velocity profile across the vessel element, but to a differentextent depending on the angle of the plate. A plate at an acuteangle to the vessel axis has little effect on the paraboloidprofile as found upstream from the plate, while obtuse angleplates change the flow profile such that fluid through poresnear the wall is accelerated to a greater velocity than foundin the centre of the cell. Key words: Conductance, perforation plate, vessel, water flow     

A Cytochemical Study of Differentiation and Breakdown of Vessel End Walls

A cytochemical approach was used to study the architecture ofthe end wall and its modifications during vessel differentiationin Populus italica and Dianthus caryophyllus. The combinationof cytochemical techniques with selective extractions to removeend wall subunits provides information on the different componentsof the end wall and on the method of perforation. The end wallappears to be formed mainly from pectins and hemicelluloses.No cellulosic components nor lignin were found though the 3,3'-diaminobenzidine assay revealed the presence of peroxidases.That the method of perforation may depend on the species isdiscussed. Dianthus caryophyllus L., carnation, Populus italica, poplar, xylem vessel, cell wall, cytochemistry, vessel differentiation     

Secondary cell wall deposition causes radial growth of fibre cells in the maturation zone of elongating tall fescue leaf blades

A gradient of development consisting of successive zones of cell division, cell elongation and cell maturation occurs along the longitudinal axis of elongating leaf blades of tall fescue (Festuca arundinacea Schreb.), a C3 grass. An increase in specific leaf weight (SLW; dry weight per unit leaf area) in the maturation region has been hypothesized to result from deposition of secondary cell walls in structural tissues. Our objective was to measure the transverse cell wall area (CWA) associated with the increase in SLW, which occurs following the cessation of leaf blade elongation at about 25 mm distal to the ligule. Digital image analysis of transverse sections at 5, 15, 45, 75 and 105 mm distal to the ligule was used to determine cell number, cell area and protoplast area of structural tissues, namely fibre bundles, mestome sheaths and xylem vessel elements, along the developmental gradient. Cell diameter, protoplast diameter and area, and cell wall thickness and area of fibre bundle cells were calculated from these data. CWA of structural tissues increased in sections up to 75 mm distal to the ligule, confirming the role of cell wall deposition in the increase in SLW (r2 = 0.924; P < or = 0.01). However, protoplast diameter of fibre cells did not decrease significantly as CWA increased, although mean thickness of fibre cell walls increased by 95 % between 15 and 105 mm distal to the ligule. Therefore, secondary cell wall deposition in fibre bundles of tall fescue leaf blades resulted in continued radial expansion of fibre cells rather than in a decrease in protoplast diameter.     

Ultrastructure of Secretory Cells in the Phloem of Mimosa pudicaL.

The secretory cells arc a prominent component of the phloemtissue of Mimosa pudica L. They form longitudinal files in whichthe common end walls of the cells are perforated. The originof the perforations in relation to protoplast differentiationwas the objectof the study. As the cells emerge from the meristematicstate, portions of cytoplasm including some organelles aretransferredinto the central vacuole and are apparently lysed. This phenomenonis accompanied by an accumulation of flocculent material, possiblythe secretory product referred to in the literature as a carbohydrate.The tonoplast ceases to be definable so that the flocculentmaterialand degraded and non-degraded protoplast componentsare intermingled inthe cell lumen. The perforation of the endwall OCCUR while the tonoplast is still intact. Theplasmalemmasof the contiguous cells withdraw from the part of the wall undergoingdegradation. The space becomes filled with fibrous debris ofthe apparently lysed wall. The degraded wallpart becomes brokenpossibly by a unidirectional pressure flow in the cells, forthe remnants of the wall are pushed into one of the two superimposedcells. At this presumably mature stage, the cells contain someintactprotoplast components among which ribosomes are especially conspicuous.     

杜仲次生木质部分化和脱分化过程中酸性磷酸酶的超微细胞化学定位

杜仲（EucommiaulmoidesOliv．）次生木质部分化过程中,在形成层刚衍生的木薄壁细胞中,酸性磷酸酶（APase）主要分布于核膜边缘和高尔基体;在分化程度较高的木薄壁细胞中,APase散布于整个核中,进而,在各种细胞器残体上聚集;在成熟的木薄壁细胞中,APase沿细胞壁内侧分布。在未成熟导管分子中,核、质膜及纹孔上明显存在APase聚集,进而,核解体;在即将分化成熟的导管分子中,APase主要集中于初生壁;在已分化成熟的导管分子中,APase集中于次生壁。脱分化过程中,只在细胞质中可见分散的APase活性,而细胞核和细胞壁上未见此酶的分布;更深层的即将分化成熟和已分化成熟的导管分子,未见有细胞分裂,其上APase的分布与剥皮前相同。通过比较分化和脱分化过程中APase的分布,推测不同的APase同工酶可能分别参与了次生木质部细胞程序性死亡过程中原生质体的解体和次生壁的建成。APase的聚集程度可能是决定细胞能否脱分化的一个重要特征。     

Influence of the Antibiotic Ciprofloxacin on Culture of Allium longicuspis Callus-derived Protoplasts

A major problem of in vitro plant culture techniques is chroniccontamination by microorganisms. Calli derived from basal partsof leaves of Allium longicuspis Regel (Alliaceae) and culturedin a medium without antibiotic contain most probably latentcontaminating microorganisms. These calli were used as the sourcematerial for isolation and culture of protoplasts. Isolatedprotoplasts were cultured in the presence of the antibioticciprofloxacin, and the protoplast viability, cell wall regenerationand cell division were studied as a function of the antibioticconcentration. Whatever the antibiotic concentration, protoplast-derivedcells kept significantly higher viability for at least 3 weekscompared with those cultured without antibiotic. As to cellwall regeneration after 2 d, it was not affected by the antibioticexcept at the highest concentration tested (100 mg l^-1). Sporadicfirst cell division was observed after 2-6 d of culture in thepresence of ciprofloxacin while, in its absence, cell divisionwas never apparent before 10 d of culture.Copyright 1995, 1999Academic Press Allium, bacteria, cell division, cell wall regeneration, ciprofloxacin, contamination, garlic, mycoplasma, protoplast culture, viability     

猫儿屎导管分子穿孔板新类型的发现

运用扫描电镜(SEM)对木通科(Lardizabalaceae)猫儿屎属(Decaisnea Hook.f. & Thoms.)植物猫儿屎[Decaisnea insignis (Griff.) Hook.f.et Thoms.]茎的次生木质部导管分子进行观察,以期为该属的系统演化提供依据.结果表明,猫儿屎的导管分子具有多个穿孔板,端壁穿孔板除了梯状以外,还有梯-网、梯-网-单、梯-单混合穿孔板等类型;侧壁穿孔板包括梯状、网状、梯-网混合状穿孔板;穿孔板上纹孔膜的残余有丝状、网状和片状.同时对导管分子的长度、宽度及端壁倾斜度等特征进行统计,并讨论了木通科各类群的穿孔板特征.     

Water Flow Through Vessel Perforation Plates--A Fluid Mechanical Approach

The effect of scalariform perforation plates on the flow ofwater through plant vessels remains poorly understood. In thisstudy, a new computational tool based on finite element methodsolutions to the Navier-Stokes equation was applied to modellingfluid flow through these structures in plant vessels. Modelsdeveloped for Liriodendron tulipifera vessel elements were solvedfor cells with and without the perforation plate to study effectsof the plate on the pressure drop along the cell. Results indicatethat the pressure gradient was 5-fold greater through the platethan for regions before and after the plate. However, the perforationplate in this species accounts for only about 8% of the resistanceto flow through typical vessels because the plate influencesflow for only a short distance along the cell relative to itslength. Details of the flow characteristics through pores ofthe perforation plate are also described. Key words: Conductance, finite element method, perforation plate, vessel, water flow     

Protoplast Rotation, Cell Division and Frustule Symmetry in the Diatom Navicula bacillum

Navicula bacillum frustules, like those of many other naviculoiddiatoms, exist in two forms, cis and trans, which occur in theratio 1 cis: 2 trans. During interphase the protoplast bearsa constant relation to the orientation of the hypovalve, suchthat the nucleus lies on the same side as the first-formed halfof the hypovalve. Immediately before mitosis the plastid andnucleus migrate around the cell until the nucleus lies on theopposite side from its interphase position, where it then divides.After cytokinesis the new valves form with their primary halveson the same side as the recently divided nuclei. This and the180° rotation of the protoplast during the cell cycle explainthe 1 cis: 2 trans ratio. Navicula bacillum Ehrenb., cell symmetry, diatom systematics, plastid structure, protoplast rotation     

Changes in Cell Wall Architecture of Differentiating Tracheids of Pinus thunbergii during Lignification

The cell wall architecture, before and after lignification,of differentiating tracheids in Pinus thunbergii has been examinedusing a rapid-freeze deep-etching technique combined with transmissionelectron microscopy. Replicas of cells from the cambial zoneshowed that the unlignified primary cell wall was highly porouswith microfibrils extensively interconnected by crosslinks.The unlignified secondary cell wall has unidirectional microfibrils,more or less associated in bundles, forming a wavy pattern aroundpores of characteristic slit-like shape with narrowing ends.As the lignification progresses, the cell wall structure becomesdense, with no detectable pores. Delignification of wood samplesleads to the reappearance of crosslinks, individual microfibrilsand pores in the secondary cell wall, although in a somewhataltered shape. In addition, cellulose-synthesizing enzyme complexes(rosettes) have for the first time been detected on the plasmamembrane of differentiating xylem cells of softwood. (Received August 28, 1998; Accepted March 10, 1999)     

The Differentiation of Contact Cells and Isolation Cells in the Xylem Ray Parenchyma of Populus maximowiczii

A histochemical analysis was made of the differentiation ofcontact cells and isolation cells in the xylem ray parenchymaof Populus maximowiczii. The contact cells formed secondarywalls at approximately the same time as adjoining vessel elements.The lignification of the cell walls of contact cells and vesselelements began earlier than that of wood fibres and isolationcells. Thus, the formation of the secondary wall, includinglignification, of the contact cells might occur at the sametime as that of the vessel elements to which they are directlyconnected. By contrast, the isolation cells began to form secondarywalls later than the vessel elements and wood fibres in thevicinity of the isolation cells. After the deposition of thesecondary wall, a protective layer was formed in contact cellsbut no isotropic layer was observed in isolation cells. Theresults suggest the importance of vessel elements in the determinationof the differentiation of adjoining ray parenchyma cells.Copyright1999 Annals of Botany Company Contact cell, isolation cell, vessel element, xylem differentiation, Populus maximowiczii Henry.     

木通科4属植物导管穿孔板的比较研究

运用扫描电子显微镜法(SEM)对木通科(Lardizabalaceae)4属植物茎的次生木质部导管分子进行观察,结果表明:(1)端壁均具有单穿孔板;(2)串果藤属的导管分子具有丰富的穿孔板类型,包括网状、梯状、单穿孔及过渡类型,穿孔具有网状、丝状、片状的纹孔膜残余;大血藤属和八月瓜属的导管分子具有相似的特征,端壁具有梯状、单穿孔及梯—单混合穿孔板;野木瓜属只具有单穿孔板;(3)侧壁上具有穿孔板,多为梯状或梯—网混合类型(除了野木瓜属);(4)野木瓜属的导管侧壁具有独特的螺旋状加厚。各属导管的不同特征为木通科的系统演化提供比较可靠的依据。     

A Cytochemical Study of Cell Wall Hydrolysis in the Secondary Xylem of Poplar (Populus italica Moench)

Certain developmental features of cell wall hydrolysis werestudied in the secondary xylem of poplar (Populus italica Moench).At the intervascular pit membrane hydrolysis starts prematurelybefore differentiation of the secondary wall is complete andincreases progressively. Eventually the whole of the middlelamella is hydrolysed, and the primary wall undergoes lyticmodification. The modified polysaccharides are dispersed, presumablyby the transpiration stream. During differentiation the vessel-parenchymapit membrane remains unaltered and undergoes thickening. Thepresent investigation suggests that the plasalemma plays animportant role in the ordered hydrolysis of certain regionsof the primary walls. Populus italicaMoench, poplar, secondaryxylem, xylem, cell wall hydrolysis, plasmalemma, pit membram     

Cell Division in Tetraspora

Cell division in Tetraspora sp. is described. The cell becomesimmotile some while before mitosis and the basal bodies withdrawfrom the cell surface. The preprophase nucleus migrates to thebasal body complex, around which increasing numbers of microtubulesgather. The spindle is closed with open polar fenestrae; a basalbody complex is always closely associated with at least onepole. No spindles were observed to have basal bodies at bothpoles, and the spindle may possibly be unicentric. During anaphase,spindle microtubules penetrate through the fenestrae. Aftertelophase, the nuclei come together as a phycoplast forms betweenthem; cytokinesis is effected by furrowing. Forming basal bodiesare frequently encountered in late telophase and cleaving cells;no evidence was obtained that the basal bodies replicated beforemitosis. The protoplast rotates inside the cell wall duringcleavage. Cell division is compared with that of other greenalgae, and in particular, Chlamydomonas.     

Alfalfa Stem Tissues: Cell-wall Development and Lignification

Alfalfa stems contain a variety of tissues with different patternsof cell-wall development. Development of alfalfa cell wallswas investigated after histochemical staining and with polarizedlight using light microscopy and scanning electron microscopy.Samples of the seventh internode, from the base of stems grownon cut stems, were harvested at five defined stages of developmentfrom early internode elongation through to late maturity. Internodeseven was elongating up to the third sample harvest and internodediameter increased throughout the entire sampling period. Chlorenchyma,cambium, secondary phloem, primary xylem parenchyma and pithparenchyma stem tissues all had thin primary cell walls. Pithparenchyma underwent a small amount of cell-wall thickeningand lignification during maturation. Collenchyma and primaryphloem tissues developed partially thickened primary walls.In contrast to a recent report, the formation of a ring shaped,lignified portion of the primary wall in a number of cells inthe exterior part of the primary phloem was found to precedethe deposition of a thick, non-lignified secondary wall whichwas degradable by rumen microbes. In numerous xylem fibres fromthe fourth harvest date onwards, an additional highly degradablesecondary wall layer was deposited against a previously depositedlignified and undegradable secondary wall. The pattern of lignificationobserved in alfalfa stem tissues suggests that polymerizationof monolignols by peroxidases at the luminal border of the primarycell wall creates an impermeable zone which restricts lignificationof the middle lamella region of tissues with thick primary walls.Copyright1998 Annals of Botany Company Alfalfa,Medicago sativaL., stem tissue, cell wall, development, lignification, degradation.     

黄三七( 毛茛科) 茎次生木质部导管穿孔板的研究*

利用扫描电子显微镜对东亚特有植物黄三七( Souliea vaginata (Maxim. ) Franch. ) 茎的次生木质部
离析材料进行了观察, 结果表明, 黄三七茎次生木质部中的导管分子端壁上具网状穿孔板( 麻黄式穿孔
板) 、梯状穿孔板、网状- 梯状混合穿孔板、网状- 梯状- 单穿孔混合型穿孔板、梯状- 单穿孔混合型穿
孔板及单穿孔板, 同时也观察到了端壁多穿孔板和侧壁穿孔板, 并对不同类型穿孔板中纹孔膜的残留也进
行了观察。其中, 网状穿孔板、各种过渡类型的穿孔板均为毛茛科植物中首次报道。根据观察结果, 对导
管分子穿孔板的演化及黄三七属植物的系统位置进行了分析。     

洋蒲桃次生木质部中导管分子的解剖学

运用细胞图像分析系统和显微照相的方法对洋蒲桃(Syzygium samarangense)次生木质部导管分子进行了观察研究。次生木质部导管分子类型有: 两端具尾导管、一端具尾导管和无尾导管。导管分子穿孔板存在着4种类型: 两端均为具2个单穿孔的复穿孔板;一端为1个单穿孔板, 另1端为具2个单穿孔的复穿孔板;两端均为单穿孔板;两单穿孔板位于同一端壁两侧相互对应以及一些过渡类型穿孔板。根据观察结果, 分析了各类型穿孔板之间的演化关系。     

洋蒲桃次生木质部中导管分子的解剖学

运用细胞图像分析系统和显微照相的方法对洋蒲桃（Syzygium samarangense）次生木质部导管分子进行了观察研究。次生木质部导管分子类型有：两端具尾导管、一端具尾导管和无尾导管。导管分子穿孔板存在着4种类型：两端均为具2个单穿孔的复穿孔板;一端为1个单穿孔板,另1端为具2个单穿孔的复穿孔板;两端均为单穿孔板：两单穿孔板位于同一端壁两侧相互对应以及一些过渡类型穿孔板。根据观察结果,分析了各类型穿孔板之间的演化关系。     

Stem anatomical variations in seedlings of the mangrove Bruguiera gymnorrhiza grown under periodical waterlogging

The purpose of this study was to investigate the stem anatomical adaptations of the mangrove Bruguiera gymnorrhiza seedlings under experimental conditions that simulated semidiurnal tides. The inundation periods in these treatments were 0, 2, 4, 6, 8, 10 and 12 h. In the 0–6 h treatments, cortex thickness, pith radius and stem radius increased, but then declined when inundation period exceeded 6 h. Significant negative linear correlations were found between waterlogging duration and vessel element length, bar number per perforation plate and gelatinous fibre ratio. Whereas vessel density and fibre diameter showed only slight fluctuations, fibre cell wall thickness declined dramatically from 2 h treatments onwards, in contrast, vessel wall thickness increased under long-term waterlogging conditions (>6 h). Tangential vessel diameter and fibre length exhibited similar tendencies, first decreasing significantly with prolonged inundation, and then increasing under long-term waterlogging duration up to 6 h. These results indicated that the internal structure of B. gymnorrhiza seedlings was affected by periodical waterlogging. The distinct structural changes with short (<6 h) or long (> 6 h) term inundation suggest distinct strategies for maintaining a balance between growth, conductive capacity, conductive safety and mechanical strength.     

A Cell Wall-degrading {alpha}-1,3-arabinofuranosidase Produced by the Potato Dry Rot Pathogen Fusarium caeruleum (Lib.) Sacc.

Fusarium caeruleum produced an arabanase which showed maximalactivity at pH 3·5 and which liberated arabinose andits oligomers from -l,3-arabinofuranan and isolated potato tuberparenchyma cell walls. This enzyme was most active in dry rotlesions produced in susceptible potato tubers by a fast-growingisolate of F. caeruleum. This arabanase is not of primary importancein causing tissue maceration, protoplast death or electrolyteloss but it may play a secondary role in these processes.