首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 656 毫秒
1.
Six different hybrid colicins were constructed by recombining various domains of the two pore-forming colicins A and E1. These hybrid colicins were purified and their properties were studied. All of them were active against sensitive cells, although to varying degrees. From the results, one can conclude that: (1) the binding site of OmpF is located in the N-terminal domain of colicin A; (2) the OmpF, TolB and TolR dependence for translocation is also located in this domain; (3) the TolC dependence for colicin E1 is located in the N-terminal domain of colicin E1; (4) the 183 N-terminal amino acid residues of colicin E1 are sufficient to promote E1AA uptake and thus probably colicin E1 uptake; (5) there is an interaction between the central domain and C-terminal domain of colicin A; (6) the individual functioning of different domains in various hybrids suggests that domain interactions can be reconstituted in hybrids that are fully active, whereas in others that are much less active, non-proper domain interactions may interfere with translocation; (7) there is a specific recognition of the C-terminal domains of colicin A and colicin E1 by their respective immunity proteins.  相似文献   

2.
Cavard D 《Journal of bacteriology》2002,184(13):3723-3733
Three oligomeric forms of colicin A with apparent molecular masses of about 95 to 98 kDa were detected on sodium dodecyl sulfate (SDS)-polyacrylamide gels loaded with unheated samples from colicin A-producing cells of Escherichia coli. These heat-labile forms, called colicins Au, were visualized both on immunoblots probed with monoclonal antibodies against colicin A and by radiolabeling. Cell fractionation studies show that these forms of colicin A were localized in the outer membrane whether or not the producing cells contained the cal gene, which encodes the colicin A lysis protein responsible for colicin A release in the medium. Pulse-chase experiments indicated that their assembly into the outer membrane, as measured by their heat modifiable migration in SDS gels, was an efficient process. Colicins Au were produced in various null mutant strains, each devoid of one major outer membrane protein, except in a mutant devoid of both OmpC and OmpF porins. In cells devoid of outer membrane phospholipase A (OMPLA), colicin A was not expressed. Colicins Au were detected on immunoblots of induced cells probed with either polyclonal antibodies to OmpF or monoclonal antibodies to OMPLA, indicating that they were associated with both OmpF and OMPLA. Similar heat-labile forms were obtained with various colicin A derivatives, demonstrating that the C-terminal domain of colicin A, but not the hydrophobic hairpin present in this domain, was involved in their formation.  相似文献   

3.
Zakharov SD  Zhalnina MV  Sharma O  Cramer WA 《Biochemistry》2006,45(34):10199-10207
The crystal structure previously obtained for the complex of BtuB and the receptor binding domain of colicin E3 forms a basis for further analysis of the mechanism of colicin import through the bacterial outer membrane. Together with genetic analysis and studies on colicin occlusion of OmpF channels, this implied a colicin translocon consisting of BtuB and OmpF that would transfer the C-terminal cytotoxic domain (C96) of colicin E3 through the Escherichia coli outer membrane. This model does not, however, explain how the colicin attains the unfolded conformation necessary for transfer. Such a conformation change would require removal of the immunity (Imm) protein, which is bound tightly in a complex with the folded colicin E3. In the present study, it was possible to obtain reversible removal of Imm in vitro in a single column chromatography step without colicin denaturation. This resulted in a mostly unordered secondary structure of the cytotoxic domain and a large decrease in stability, which was also found in the receptor binding domain. These structure changes were documented by near- and far-UV circular dichroism and intrinsic tryptophan fluorescence. Reconstitution of Imm in a complex with C96 or colicin E3 restored the native structure. C96 depleted of Imm, in contrast to the native complex with Imm, efficiently occluded OmpF channels, implying that the presence of tightly bound Imm prevents its unfolding and utilization of the OmpF porin for subsequent import of the cytotoxic domain.  相似文献   

4.
Zakharov SD  Sharma O  Zhalnina MV  Cramer WA 《Biochemistry》2008,47(48):12802-12809
Cellular import of colicin E3 is initiated by high affinity binding of the colicin receptor-binding (R) domain to the vitamin B(12) (BtuB) receptor in the Escherichia coli outer membrane. The BtuB binding site, at the apex of its extended coiled-coil R-domain, is distant from the C-terminal nuclease domain that must be imported for expression of cytotoxicity. Based on genetic analysis and previously determined crystal structures of the R-domain bound to BtuB, and of an N-terminal disordered segment of the translocation (T) domain inserted into the OmpF porin, a translocon model for colicin import has been inferred. Implicit in the model is the requirement for unfolding of the colicin segments inserted into OmpF. FRET analysis was employed to study colicin unfolding upon interaction with BtuB and OmpF. A novel method of Cys-specific dual labeling of a native polypeptide, which allows precise placement of donor and acceptor fluorescent dyes on the same polypeptide chain, was developed. A decrease in FRET efficiency between the translocation and cytotoxic domains of the colicin E3 was observed upon colicin binding in vitro to BtuB or OmpF. The two events were independent and additive. The colicin interactions with BtuB and OmpF have a major electrostatic component. The R-domain Arg399 is responsible for electrostatic interaction with BtuB. It is concluded that free energy for colicin unfolding is provided by binding of the R- domain to BtuB and binding/insertion of the T-domain to/into OmpF.  相似文献   

5.
The crystal structure of the complex of the BtuB receptor and the 135-residue coiled-coil receptor-binding R-domain of colicin E3 (E3R135) suggested a novel mechanism for import of colicin proteins across the outer membrane. It was proposed that one function of the R-domain, which extends along the outer membrane surface, is to recruit an additional outer membrane protein(s) to form a translocon for passage colicin activity domain. A 3.5-A crystal structure of the complex of E2R135 and BtuB (E2R135-BtuB) was obtained, which revealed E2R135 bound to BtuB in an oblique orientation identical to that previously found for E3R135. The only significant difference between the two structures was that the bound coiled-coil R-domain of colicin E2, compared with that of colicin E3, was extended by two and five residues at the N and C termini, respectively. There was no detectable displacement of the BtuB plug domain in either structure, implying that colicin is not imported through the outer membrane by BtuB alone. It was concluded that the oblique orientation of the R-domain of the nuclease E colicins has a function in the recruitment of another member(s) of an outer membrane translocon. Screening of porin knock-out mutants showed that either OmpF or OmpC can function in such a translocon. Arg(452) at the R/C-domain interface in colicin E2 was found have an essential role at a putative site of protease cleavage, which would liberate the C-terminal activity domain for passage through the outer membrane translocon.  相似文献   

6.
The 315-residue N-terminal T domain of colicin E3 functions in translocation of the colicin across the outer membrane through its interaction with outer membrane proteins including the OmpF porin. The first 83 residues of the T domain are known from structure studies to be disordered. This flexible translocation subdomain contains the TolB box (residues 34 to 46) that must cross the outer membrane in an early translocation event, allowing the colicin to bind to the TolB protein in the periplasm. In the present study, it was found that cytotoxicity of the colicin requires a minimum length of 19 to 23 residues between the C terminus (residue 46) of the TolB box and the end of the flexible subdomain (residue 83). Colicin E3 molecules of sufficient length display normal binding to TolB and occlusion of OmpF channels in vitro. The length of the N-terminal subdomain is critical because it allows the TolB box to cross the outer membrane and interact with TolB. It is proposed that the length constraint is a consequence of ordered structure in the downstream segment of the T domain (residues 84 to 315) that prevents its insertion through the outer membrane via a translocation pore that includes OmpF.  相似文献   

7.
Colicins kill Escherichia coli after translocation across the outer membrane. Colicin N displays an unusually simple translocation pathway, using the outer membrane protein F (OmpF) as both receptor and translocator. Studies of this binary complex may therefore reveal a significant component of the translocation pathway. Here we show that, in 2D crystals, colicin is found outside the porin trimer, suggesting that translocation may occur at the protein-lipid interface. The major lipid of the outer leaflet interface is lipopolysaccharide (LPS). It is further shown that colicin N binding displaces OmpF-bound LPS. The N-terminal helix of the pore-forming domain, which is not required for pore formation, rearranges and binds to OmpF. Colicin N also binds artificial OmpF dimers, indicating that trimeric symmetry plays no part in the interaction. The data indicate that colicin is closely associated with the OmpF-lipid interface, providing evidence that this peripheral pathway may play a role in colicin transmembrane transport.  相似文献   

8.
Pore-forming colicins are a family of protein toxins (Mr40–70kDa) produced by Escherichia coli and related bacteria. They are bactericidal by virtue of their ability to form ion channels in the inner membrane of target cells. They provide a useful means of studying questions such as toxin action, polypeptide translocation across and into membranes, voltage-gated channels and receptor function. These colicins bind to a receptor in the outer membrane before being translocated across the cell envelope with the aid of helper proteins that belong to nutrient-uptake systems and the so-called‘Tol’proteins, the function of which has not yet been properly defined. A distinct domain appears to be associated with each of three steps (receptor binding, translocation and formation of voltage-gated channels). The Tol-dependent uptake pathway is described here. The structures and interactions of TolA, B, Q and R have by now been quite clearly defined. Transmembrane α-helix interactions are required for the functional assembly of the E. coli Tol complex, which is preferentially located at contact sites between the inner and outer membranes. The number of colicin translocation sites is about 1000 per cell. The role and the involvement of the OmpF porin (with colicins A and N) have been described in a recent study on the structural and functional interactions of a colicin-resistant mutant of OmpF. The X-ray crystal structure of the channel-forming fragment of colicin A and that of the entire colicin la have provided the basis for biophysical and site-directed muta-genesis studies. Thanks to this powerful combination, it has been established that the interaction with the receptor in the outer membrane leads to a very substantial conformational change, as a result of which the N-terminal domains of colicins interact with the lumen of the OmpF pore and then with the C-terminal domain of TolA. A molten globular conformation of colicins probably constitutes the intermediate translocation/insertion competent state. Once the pore has formed, the polypeptide chain spans the whole cell envelope. Three distinct steps occur in the last stage of the process: (i) fast binding of the C-terminal domain to the outer face of the cytoplasmic membrane; (ii) a slow insertion of the polypeptide chain into the outer face of the inner membrane in the absence of Δψ and (iii) a profound reorganization of the helix association, triggered by the transmembrane potential and resulting in the formation of the colicin channel.  相似文献   

9.
Cellular import of colicin E3 is initiated by the Escherichia coli outer membrane cobalamin transporter, BtuB. The 135-residue 100-A coiled-coil receptor-binding domain (R135) of colicin E3 forms a 1:1 complex with BtuB whose structure at a resolution of 2.75 A is reported. Binding of R135 to the BtuB extracellular surface (DeltaG(o) = -12 kcal mol(-1)) is mediated by 27 residues of R135 near the coiled-coil apex. Formation of the R135-BtuB complex results in unfolding of R135 N- and C-terminal ends, inferred to be important for unfolding of the colicin T-domain. Small conformational changes occur in the BtuB cork and barrel domains but are insufficient to form a translocation channel. The absence of a channel and the peripheral binding of R135 imply that BtuB serves to bind the colicin, and that the coiled-coil delivers the colicin to a neighboring outer membrane protein for translocation, thus forming a colicin translocon. The translocator was concluded to be OmpF from the occlusion of OmpF channels by colicin E3.  相似文献   

10.
We have constructed, by recombinant DNA techniques, one hybrid protein, colicin A-beta-lactamase (P24), and two modified colicin As, one (P44) lacking a large central domain and the other (PX-345) with a different C-terminal region. The regulation of synthesis, the release into the medium and the properties of these proteins were studied. Only P44 was released into the medium. This suggests that both ends of the colicin A polypeptide chain might be required for colicin release. None of the three proteins was active on sensitive cells in an assay in vivo. However, P44 was able to form voltage-dependent channels in phospholipid planar bilayers. Its lack of activity in vivo is therefore probably caused by the inability to bind to the receptor in the outer membrane. PX-345 is a colicin in which the last 43 amino acids of colicin A have been replaced by 27 amino acids encoded by another reading frame in the same region of the colicin A structural gene; it was totally unable to form pores in planar bilayers at neutral pH but showed a very slight activity at acidic pH. These results confirm that the C-terminal domain of colicin A is involved in pore formation and indicate that at least the 43 C-terminal amino acid residues of this domain play a significant role in pore formation or pore function. Fifteen monoclonal antibodies directed against colicin A have been isolated by using conventional techniques. Five out of the 15 monoclonal antibodies could preferentially recognize wild-type colicin A. In addition, the altered forms of the colicin A polypeptide were used to map the epitopes of ten monoclonal antibodies reacting specifically with colicin A. Some of the antibodies did not bind to colicin A when it was pre-incubated at acidic pH suggesting that colicin A undergoes conformational change at about pH 4. The effects of monoclonal antibodies on activity in vivo of colicin A were investigated. The degree of inhibition observed was related to the location of the epitopes, with monoclonal antibodies reacting with the N terminus giving greater inhibition. The monoclonal antibodies directed against the C-terminal region promoted an apparent activation of colicin activity in vivo.  相似文献   

11.
Colicins A, E1, E2 and E3 belong to the BtuB group of colicins. The NH2-terminal region of colicin A is required for translocation, and defects in this region cannot be overcome by osmotic shock of sensitive cells. In addition to BtuB, colicin A requires OmpF for efficient uptake by sensitive cells. The roles of BtuB and OmpF in translocation and binding to the receptor of the colicins A, E1, E2 and E3 were compared. The results suggest that for colicin A OmpF is used both as a receptor and for translocation across the outer membrane. In contrast, for colicin E1, OmpF is used neither as a receptor nor for translocation. For colicins E2 and E3, the situation is intermediate: only BtuB is used as a receptor but both BtuB and OmpF are involved in the translocation step.  相似文献   

12.
The mechanisms by which colicins, protein toxins produced by Escherichia coli, kill other E. coli, have become much better understood in recent years. Most colicins initially bind to an outer membrane protein receptor, and then search for a separate nearby outer membrane protein translocator that serves as a pathway into target cells. Many colicins use the outer membrane porin, OmpF, as that translocator, while using a different primary receptor. Colicin N is unique among known colicins in that only OmpF had been identified as being required for uptake of the colicin and it was presumed to somehow serve as both receptor and translocator. Genetic screens also identified a number of genes required for lipopolysaccharide (LPS) synthesis as uniquely required for killing by colicin N, but not by other colicins. Johnson et al. show that the receptor‐binding domain of colicin N binds to LPS, and does not require OmpF for that binding. LPS of a minimal length is required for binding, explaining the requirement for specific elements of the LPS biosynthetic pathway. For colicin N, the receptor‐binding domain does not recognize a protein, but rather the most abundant component of the outer membrane itself, LPS.  相似文献   

13.
The interaction of colicins with target cells is a paradigm for protein import. To enter cells, bactericidal colicins parasitize Escherichia coli outer membrane receptors whose physiological purpose is the import of essential metabolites. Colicins E1 and E3 initially bind to the BtuB receptor, whose beta-barrel pore is occluded by an N-terminal globular "plug". The x-ray structure of a complex of BtuB with the coiled-coil BtuB-binding domain of colicin E3 did not reveal displacement of the BtuB plug that would allow passage of the colicin (Kurisu, G., S. D. Zakharov, M. V. Zhalnina, S. Bano, V. Y. Eroukova, T. I. Rokitskaya, Y. N. Antonenko, M. C. Wiener, and W. A. Cramer. 2003. Nat. Struct. Biol. 10:948-954). This correlates with the inability of BtuB to form ion channels in planar bilayers, shown in this work, suggesting that an additional outer membrane protein(s) is required for colicin import across the outer membrane. The identity and interaction properties of this OMP were analyzed in planar bilayer experiments.OmpF and TolC channels in planar bilayers were occluded by colicins E3 and E1, respectively, from the trans-side of the membrane. Occlusion was dependent upon a cis-negative transmembrane potential. A positive potential reversibly opened OmpF and TolC channels. Colicin N, which uses only OmpF for entry, occludes OmpF in planar bilayers with the same orientation constraints as colicins E1 and E3. The OmpF recognition sites of colicins E3 and N, and the TolC recognition site of colicin E1, were found to reside in the N-terminal translocation domains. These data are considered in the context of a two-receptor translocon model for colicin entry into cells.  相似文献   

14.
Colicin N kills sensitive Escherichia coli cells by first binding to its trimeric receptor (OmpF) via its receptor binding domain. It then uses OmpF to translocate across the outer membrane and in the process it also needs domains II and III of the protein TolA. Recent studies have demonstrated sodium dodecyl sulfate- (SDS) dependent complex formation between trimeric porins and TolA-II. Here we demonstrate that colicin N forms similar complexes with the same trimeric porins and that this association is unexpectedly solely dependent upon the pore-forming domain (P-domain). No binding was seen with the monomeric porin OmpA. In mixtures of P-domain and TolA with OmpF porin, only binary and no ternary complexes were observed, suggesting that binding of these proteins to the porin is mutually exclusive. Pull-down assays in solution show that porin-P-domain complexes also form in the presence of outer membrane lipopolysaccharide. This indicates that an additional colicin-porin interaction may occur within the outer membrane, one that involves the colicin pore domain rather than the receptor-binding domain. This may help to explain the role of porins and TolA-II in the later stages of colicin translocation.  相似文献   

15.
The OmpF porin in the Escherichia coli outer membrane (OM) is required for the cytotoxic action of group A colicins, which are proposed to insert their translocation and active domains through OmpF pores. A crystal structure was sought of OmpF with an inserted colicin segment. A 1.6 A OmpF structure, obtained from crystals formed in 1 M Mg2+, has one Mg2+ bound in the selectivity filter between Asp113 and Glu117 of loop 3. Co-crystallization of OmpF with the unfolded 83 residue glycine-rich N-terminal segment of colicin E3 (T83) that occludes OmpF ion channels yielded a 3.0 A structure with inserted T83, which was obtained without Mg2+ as was T83 binding to OmpF. The incremental electron density could be modelled as an extended poly-glycine peptide of at least seven residues. It overlapped the Mg2+ binding site obtained without T83, explaining the absence of peptide binding in the presence of Mg2+. Involvement of OmpF in colicin passage through the OM was further documented by immuno-extraction of an OM complex, the colicin translocon, consisting of colicin E3, BtuB and OmpF.  相似文献   

16.
[125I]-colicin N binds to OmpF receptor sites (70,000 per cell) with an average Kassoc of 3.2 x 10(6) M-1 at 23 degrees C. Monoclonal antibody directed against a cell-surface-exposed epitope of OmpF is able to complete with the binding of the colicin in vitro and also to protect against colicin N in vivo. OmpF is an absolute requirement for colicin N uptake. OmpC cannot serve as a substitute for OmpF during translocation across the outer membrane under receptor bypass conditions, which is in contrast to colicin A. Colicin N does not cross-react with various monoclonal antibodies directed against colicin A.  相似文献   

17.
Proteins that translocate across cell membranes need to overcome a significant hydrophobic barrier. This is usually accomplished via specialized protein complexes, which provide a polar transmembrane pore. Exceptions to this include bacterial toxins, which insert into and cross the lipid bilayer itself. We are studying the mechanism by which large antibacterial proteins enter Escherichia coli via specific outer membrane proteins. Here we describe the use of neutron scattering to investigate the interaction of colicin N with its outer membrane receptor protein OmpF. The positions of lipids, colicin N, and OmpF were separately resolved within complex structures by the use of selective deuteration. Neutron reflectivity showed, in real time, that OmpF mediates the insertion of colicin N into lipid monolayers. This data were complemented by Brewster Angle Microscopy images, which showed a lateral association of OmpF in the presence of colicin N. Small angle neutron scattering experiments then defined the three-dimensional structure of the colicin N-OmpF complex. This revealed that colicin N unfolds and binds to the OmpF-lipid interface. The implications of this unfolding step for colicin translocation across membranes are discussed.  相似文献   

18.
Colicins translocate across the Escherichia coli outer membrane and periplasm by interacting with several receptors. After first binding to outer membrane surface receptors via their central region, they interact with TolA or TonB proteins via their N-terminal regions. Finally, the toxic C-terminal region is inserted into or across the cytoplasmic membrane. We have measured the binding of colicin N to TolA by isothermal titration microcalorimetry (ITC) and tryptophan fluorescence. The isolated N-terminal domain exhibits a higher affinity for TolA ( K d = 1 μM) than does the whole colicin (18 μM), and similar behaviour has been observed when the N-terminal domain of the g3p protein of the bacteriophage fd, which also binds TolA, is examined in isolation and in situ . This may indicate a similar mechanism in which a cryptic TolA binding site is revealed after primary receptor binding. The isolated colicin N N-terminal domain appears to be unstructured in circular dichroism and fluorescence studies. We have used mutagenesis and ITC to characterize the TolA binding site and have shown it to be of a different sequence and much further from the N-terminus than previously thought.  相似文献   

19.
To test the importance of N-terminal pre-sequences in translocation of different classes of membrane proteins, we exchanged the normal signal sequence of an Escherichia coli outer membrane protein, OmpF, for the pre-sequence of the inner membrane protein, DacA. The DacA-OmpF hybrid was efficiently assembled into the outer membrane in a functionally active form. Thus the pre-sequence of DacA, despite its relatively low hydrophobicity compared with that of OmpF, contains all the essential information necessary to initiate the translocation of OmpF to the outer membrane. Since processing of DacA was also shown to be dependent upon SecA we conclude that the initiation of translocation of this inner membrane polypeptide across the envelope occurs by the same mechanism as outer membrane and periplasmic proteins. The N-terminal 11 amino acids of mature OmpF, which in the hybrid are replaced by the N-terminal nine amino acids of DacA, carry no essential assembly signals since the hybrid protein is apparently assembled with equal efficiency to OmpF.  相似文献   

20.
The mechanism by which E colicins recognize and then bind to BtuB receptors in the outer membrane of Escherichia coli cells is a poorly understood first step in the process that results in cell killing. Using N- and C-terminal deletions of the N-terminal 448 residues of colicin E9, we demonstrated that the smallest polypeptide encoded by one of these constructs that retained receptor-binding activity consisted of residues 343-418. The results of the in vivo receptor-binding assay were supported by an alternative competition assay that we developed using a fusion protein consisting of residues 1-497 of colicin E9 fused to the green fluorescent protein as a fluorescent probe of binding to BtuB in E. coli cells. Using this improved assay, we demonstrated competitive inhibition of the binding of the fluorescent fusion protein by the minimal receptor-binding domain of colicin E9 and by vitamin B12. Mutations located in the minimum R domain that abolished or reduced the biological activity of colicin E9 similarly affected the competitive binding of the mutant colicin protein to BtuB. The sequence of the 76-residue R domain in colicin E9 is identical to that found in colicin E3, an RNase type E colicin. Comparative sequence analysis of colicin E3 and cloacin DF13, which is also an RNase-type colicin but uses the IutA receptor to bind to E. coli cells, revealed significant sequence homology throughout the two proteins, with the exception of a region of 92 residues that included the minimum R domain. We constructed two chimeras between cloacin DF13 and colicin E9 in which (i) the DNase domain of colicin E9 was fused onto the T+R domains of cloacin DF13; and (ii) the R domain and DNase domain of colicin E9 were fused onto the T domain of cloacin DF13. The killing activities of these two chimeric colicins against indicator strains expressing BtuB or IutA receptors support the conclusion that the 76 residues of colicin E9 confer receptor specificity. The minimum receptor-binding domain polypeptide inhibited the growth of the vitamin B12-dependent E. coli 113/3 mutant cells, demonstrating that vitamin B12 and colicin E9 binding is mutually exclusive.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号