Core residue replacements cause coiled-coil orientation switching in vitro and in vivo: structure-function correlations for osmosensory transporter ProP

Protein ProP acts as an osmosensory transporter in diverse bacteria. C-Terminal residues 468-497 of Escherichia coli ProP (ProPEc) form a four-heptad homodimeric alpha-helical coiled coil. Arg 488, at a core heptad a position, causes it to assume an antiparallel orientation. Arg in the hydrophobic core of coiled coils is destabilizing, but Arg 488 forms stabilizing interstrand salt bridges with Asp 475 and Asp 478. Mutation R488I destabilizes the coiled coil and elevates the osmotic pressure at which ProPEc activates. It may switch the coiled-coil orientation to parallel by eliminating the salt bridges and increasing the hydrophobicity of the core. In this study, mutations D475A and D478A, which disrupt the salt bridges without increasing the hydrophobicity of the coiled-coil core, had the expected modest impacts on the osmotic activation of ProPEc. The five-heptad coiled coil of Agrobacterium tumefaciens ProP (ProPAt) has K498 and R505 at a positions. Mutation K498I had little effect on the osmotic activation of ProPAt, and ProPAt-R505I was activated only at high osmotic pressure; on the other hand, the double mutant was refractory to osmotic activation. Both a synthetic peptide corresponding to ProPAt residues 478-516 and its K498I variant maintained the antiparallel orientation. The single R505I substitution created an unstable coiled coil with little orientation preference. Double mutation K498I/R505I switched the alignment, creating a stable parallel coiled coil. In vivo cross-linking showed that the C-termini of ProPAt and ProPAt-K498I/R505I were antiparallel and parallel, respectively. Thus, the antiparallel orientation of the ProP coiled coil is contingent on Arg in the hydrophobic core and interchain salt bridges. Two key amino acid replacements can convert it to a stable parallel structure, in vitro and in vivo. An intermolecular antiparallel coiled coil, present on only some orthologues, lowers the osmotic pressure required to activate ProP. Formation of a parallel coiled coil renders ProP inactive.     

Formation of an antiparallel, intermolecular coiled coil is associated with in vivo dimerization of osmosensor and osmoprotectant transporter ProP in Escherichia coli

Membrane transporter ProP from Escherichia coli senses extracellular osmolality and responds by mediating the uptake of osmoprotectants such as glycine betaine when osmolality is high. Earlier EPR and NMR studies showed that a peptide replica of the cytoplasmic ProP carboxyl terminus (residues D468-R497) forms a homodimeric, antiparallel, alpha-helical coiled coil in vitro stabilized by electrostatic interactions involving R488. Amino acid replacement R488I disrupted coiled-coil formation by the ProP peptide, elevated the osmolality at which ProP became active, and rendered the osmolality response of ProP transient. In the present study, either E480 or K473 was replaced with cysteine (Cys) in ProP, a Cys-less, fully functional, histidine-tagged ProP variant, to use Cys-specific cross-linking approaches to determine if antiparallel coiled-coil formation and dimerization of the intact protein occur in vivo. The Cys at positions 480 would be closer in an antiparallel dimer than those at positions 473. These replacements did not disrupt coiled-coil formation by the ProP peptide. Partial homodimerization of variant ProP-E480C could be demonstrated in vivo and in membrane preparations via Cys-specific cross-linking with dithiobis(maleimidoethane) or by Cys oxidation to cystine by copper phenanthroline. In contrast, these reagents did not cross-link ProP with Cys at position 133 or 241. Cross-linking of ProP with Cys at position 473 was limited and occurred only if ProP was overexpressed, consistent with an antiparallel orientation of the coiled coil in the intact protein in vivo. Although replacement E480C did not alter transporter activity, replacement K473C reduced the extent and elevated the threshold for osmotic activation. K473 may play a role in ProP structure and function that is not reflected in altered coiled-coil formation by the corresponding peptide. Substitution R488I affected the activities of ProP-(His)(6), ProP-E480C, and ProP-K473C as it affected the activity of ProP. Surprisingly, it did not eliminate cross-linking of Cys at position 480, and it elevated cross-linking at position 473, even when ProP was expressed at physiological levels. This suggested that the R488I substitution may have changed the relative orientation of the C-termini within the dimeric protein from antiparallel to parallel, resulting in only transient osmotic activation. These results suggest that ProP is in monomer-dimer equilibrium in vivo. Dimerization may be mediated by C-terminal coiled-coil formation and/or by interactions between other structural domains, which in turn facilitate C-terminal coiled-coil formation. Antiparallel coiled-coil formation is required for activation of ProP at low osmolality.     

The role of the carboxyl terminal alpha-helical coiled-coil domain in osmosensing by transporter ProP of Escherichia coli

Concentrative uptake of osmoprotectants via transporter ProP contributes to the rehydration of Escherichia coli cells that encounter high osmolality media. A member of the major facilitator superfamily, ProP is activated by osmotic upshifts in whole bacteria, in cytoplasmic membrane vesicles and in proteoliposomes prepared with the purified protein. Soluble protein ProQ is also required for full osmotic activation of ProP in vivo. ProP is differentiated from structural and functional homologues by its osmotic activation and its C-terminal extension, which is predicted to form an alpha-helical coiled-coil. A synthetic polypeptide corresponding to the C-terminus of ProP (ProP-p) formed a dimeric alpha-helical coiled-coil. A derivative of transporter ProP lacking 26 C-terminal amino acids was expressed but inactive. A derivative harbouring amino acid changes K460I, Y467I and H495I (each at the core, coiled-coil 'a' position) required a larger osmotic upshift for activation than did the wild type transporter. The same changes extended, stabilized and altered the oligomeric state of the coiled-coil formed by ProP-p. Amino acid change R488I (also at the 'a' position) further increased the magnitude of the osmotic upshift required to activate ProP, reduced the activity attained and rendered ProP activation transient. Unexpectedly, replacement R488I destabilized the coiled-coil formed by ProP-p. The activity and osmotic activation of ProP were even more strongly attenuated by helix-destabilizing change I474P. These data demonstrate that the carboxyl terminal domain of ProP can form a homodimeric alpha-helical coiled-coil with unusual properties. They implicate the C-terminal domain in the osmotic activation of ProP.     

Detection of alpha-helical coiled-coil dimer formation by spin-labeled synthetic peptides: a model parallel coiled-coil peptide and the antiparallel coiled coil formed by a replica of the ProP C-terminus

Electron paramagnetic resonance spectroscopy was used to determine relative peptide orientation within homodimeric, alpha-helical coiled-coil structures. Introduction of cysteine (Cys) residues into peptides/proteins for spin labeling allows detection of their oligomerization from exchange broadening or dipolar interactions between residues within 25 A of each other. Two synthetic peptides containing Cys substitutions were used: a 35-residue model peptide and the 30-residue ProP peptide. The model peptide is known to form a stable, parallel homodimeric coiled coil, which is partially destabilized by Cys substitutions at heptad a and d positions (peptides C30a and C33d). The ProP peptide, a 30-residue synthetic peptide, corresponds to residues 468-497 of osmoregulatory transporter ProP from Escherichia coli. It forms a relatively unstable, homodimeric coiled coil that is predicted to be antiparallel in orientation. Cys was introduced in heptad g positions of the ProP peptide, near the N-terminus (K473C, creating peptide C473g) or closer to the center of the sequence (E480C, creating peptide C480g). In contrast to the destabilizing effect of Cys substitution at the core heptad a or d positions of model peptides C30a and C33d, circular dichroism spectroscopy showed that Cys substitutions at the heptad g positions of the ProP peptide had little or no effect on coiled-coil stability. Thermal denaturation analysis showed that spin labeling increased the stability of the coiled coil for all peptides. Strong exchange broadening was detected for both C30a and C33d, in agreement with a parallel structure. EPR spectra of C480g had a large hyperfine splitting of about 90 G, indicative of strong dipole-dipole interactions and a distance between spin-labeled residues of less than 9 A. Spin-spin interactions were much weaker for C473g. These results supported the hypothesis that the ProP peptide primarily formed an antiparallel coiled coil, since formation of a parallel dimer should result in similar spin-spin interactions for the spin-labeled Cys at both sites.     

The osmotic activation of transporter ProP is tuned by both its C-terminal coiled-coil and osmotically induced changes in phospholipid composition

Transporter ProP of Escherichia coli (ProPEc) senses extracellular osmolality and mediates osmoprotectant uptake when it is rising or high. A replica of the ProPEc C terminus (Asp468-Arg497) forms an intermolecular alpha-helical coiled-coil. This structure is implicated in the osmoregulation of intact ProPEc, in vivo. Like that from Corynebacterium glutamicum (ProPCg), the ProP orthologue from Agrobacterium tumefaciens (ProPAt) sensed and responded to extracellular osmolality after expression in E. coli. The osmotic activation profiles of all three orthologues depended on the osmolality of the bacterial growth medium, the osmolality required for activation rising as the growth osmolality approached 0.7 mol/kg. Thus, each could undergo osmotic adaptation. The proportion of cardiolipin in a polar lipid extract from E. coli increased with extracellular osmolality so that the osmolality activating ProPEc was a direct function of membrane cardiolipin content. Group A ProP orthologues (ProPEc, ProPAt) share the C-terminal coiled-coil domain and were activated at low osmolalities. Like variant ProPEc-R488I, in which the C-terminal coiled-coil is disrupted, ProPEc derivatives that lack the coiled-coil and Group B orthologue ProPCg required a higher osmolality to activate. The amplitude of ProPEc activation was reduced 10-fold in its deletion derivatives. The coiled-coil structure is not essential for osmotic activation of ProP per se. However, it tunes Group A orthologues to osmoregulate over a low osmolality range. Coiled-coil lesions may impair both coiled-coil formation and interaction of ProPEc with amplifier protein ProQ. Cardiolipin may contribute to ProP adaptation by altering bulk membrane properties or by acting as a ProP ligand.     

Cardiolipin controls the osmotic stress response and the subcellular location of transporter ProP in Escherichia coli

The phospholipid composition of the membrane and transporter structure control the subcellular location and function of osmosensory transporter ProP in Escherichia coli. Growth in media of increasing osmolality increases, and entry to stationary phase decreases, the proportion of phosphatidate in anionic lipids (phosphatidylglycerol (PG) plus cardiolipin (CL)). Both treatments increase the CL:PG ratio. Transporters ProP and LacY are concentrated with CL (and not PG) near cell poles and septa. The polar concentration of ProP is CL-dependent. Here we show that the polar concentration of LacY is CL-independent. The osmotic activation threshold of ProP was directly proportional to the CL content of wild type bacteria, the PG content of CL-deficient bacteria, and the anionic lipid content of cells and proteoliposomes. CL was effective at a lower concentration in cells than in proteoliposomes, and at a much lower concentration than PG in either system. Thus, in wild type bacteria, osmotic induction of CL synthesis and concentration of ProP with CL at the cell poles adjust the osmotic activation threshold of ProP to match ambient conditions. ProP proteins linked by homodimeric, C-terminal coiled-coils are known to activate at lower osmolalities than those without such structures and coiled-coil disrupting mutations raise the osmotic activation threshold. Here we show that these mutations also prevent polar concentration of ProP. Stabilization of the C-terminal coiled-coil by covalent cross-linking of introduced Cys reverses the impact of increasing CL on the osmotic activation of ProP. Association of ProP C termini with the CL-rich membrane at cell poles may raise the osmotic activation threshold by blocking coiled-coil formation. Mutations that block coiled-coil formation may also block association of the C termini with the CL-rich membrane.     

Assembly of Acanthamoeba myosin-II minifilaments. Definition of C-terminal residues required to form coiled-coils, dimers, and octamers

Acanthamoeba myosin-II forms bipolar octamers by three successive steps of dimerization of the C-terminal, coiled-coil tail. In this study, we generated N-terminal and C-terminal truncation constructs and point mutants of the Acanthamoeba myosin-II tail to delineate the structural requirements for assembly of bipolar mini-filaments. By the use of light-scattering, CD spectroscopy, analytical ultracentrifugation, and tryptophan fluorescence experiments, we determined that: (1) the C-terminal 14 heptad repeats plus most of the tailpiece (residues 1381-1509) are required to form antiparallel dimers of coiled-coils; (2) amino acid residues within heptads 23-32 (residues 1254-1325) are required to form tetramers; (3) the C-terminal 32 heptad repeats suffice to assemble octameric minifilaments; (4) A1378 is outside of the interaction interface; (5) the mutation L1475W inhibits dimerization; and (6) F1443 is involved in the dimerization interface but is exposed to the solvent. We propose that the tailpiece (residues 1483-1509) interacts with two heptads (13 and 14, residues 1381-1393), which are important for dimerization and coiled-coil formation. These results support a model in which hydrophobic as well as electrostatic interactions control the register between myosin-II coiled-coils and guide sequential steps of dimerization that generate stable, octameric mini-filaments.     

Role of the simian virus 5 fusion protein N-terminal coiled-coil domain in folding and promotion of membrane fusion

Formation of a six-helix bundle comprised of three C-terminal heptad repeat regions in antiparallel orientation in the grooves of an N-terminal coiled-coil is critical for promotion of membrane fusion by paramyxovirus fusion (F) proteins. We have examined the effect of mutations in four residues of the N-terminal heptad repeat in the simian virus 5 (SV5) F protein on protein folding, transport, and fusogenic activity. The residues chosen have previously been shown from study of isolated peptides to have differing effects on stability of the N-terminal coiled-coil and six-helix bundle (R. E. Dutch, G. P. Leser, and R. A. Lamb, Virology 254:147-159, 1999). The mutant V154M showed reduced proteolytic cleavage and surface expression, indicating a defect in intracellular transport, though this mutation had no effect when studied in isolated peptides. The mutation I137M, previously shown to lower thermostability of the six-helix bundle, resulted in an F protein which was properly processed and transported to the cell surface but which had reduced fusogenic activity. Finally, mutations at L140M and L161M, previously shown to disrupt alpha-helix formation of isolated N-1 peptides but not to affect six-helix bundle formation, resulted in F proteins that were properly processed. Interestingly, the L161M mutant showed increased syncytium formation and promoted fusion at lower temperatures than the wild-type F protein. These results indicate that interactions separate from formation of an N-terminal coiled-coil or six-helix bundle are important in the initial folding and transport of the SV5 F protein and that mutations that destabilize the N-terminal coiled-coil can result in stimulation of membrane fusion.     

Addition of artificial salt bridge by Ile646Lys mutation in gp41 coiled-coil domain regulates 6-helical bundle formation

HIV entry is mediated by the envelope glycoproteins gp120 and gp41. The gp41 subunit contains several functional domains: the N-terminal heptad repeat (NHR) domains fold a triple stranded coiled-coil forming a meta-stable prefusion intermediate. C-terminal heptad repeat (CHR) subsequently folds onto the hydrophobic grooves of the NHR coiled-coil to form a stable 6-helix bundle, which juxtaposes the viral and cellular membranes for fusion. The C34 which has 34 amino acid residues is known as the core structure in CHR. A highly anti-HIV peptide inhibitor derived from C34 was designed. An artificial salt bridge was added in the 6-helical bundle by substitution of lysine for Ile646. With a cholesterol modification at C-terminal, the inhibitor containing I646K mutation represented higher anti-viral activity than C34–cholesterol combination without mutation.     

Genetic analysis of the leucine heptad repeats of Lac repressor: evidence for a 4-helical bundle.

Gel-filtration experiments indicate that a peptide (P2) composed of the basic region of GCN4 fused to the leucine heptad repeats of Lac repressor forms tetrameric aggregates. Gel-shift experiments were performed to determine the orientation of the helices in the tetrameric P2 aggregate. Sandwich-complex formation of peptide P2 with two DNA fragments containing two symmetrical CRE binding sites (5'-ATGACGTCAT-3') at a distance of 21 bp suggests antiparallel aggregation of the Lac leucine heptad repeats. Thus, we conclude that the leucine heptad repeats of Lac repressor have the ability to form homomeric 4-helical bundles with an antiparallel arrangement of the helices. This topology enables the two DNA fragments in the sandwich complexes to be held together by two tetramers of peptide P2. Replacement of the uncharged amino acids of the helical g and e positions of peptide P2 by the corresponding charged residues of GCN4 (peptide P4) results in a dimeric and parallel aggregation of the leucine heptad repeats, and consequently abolishes the potential to form sandwich structures. Similarly, a hybrid Lac repressor in which the GCN4 leucine zipper replaces the natural Lac leucine heptad repeats forms dimers only. It regains the ability to form tetramers when the charged amino acids in helical positions g and e are replaced by uncharged alanines.     

X-ray structure of a water-soluble analog of the membrane protein phospholamban: sequence determinants defining the topology of tetrameric and pentameric coiled coils

Phospholamban (PLB) is a pentameric transmembrane protein that regulates the Ca(2+)-dependent ATPase SERCA2a in sarcoplasmic reticulum membranes. We previously described the computational design of a water-soluble variant of phospholamban, WSPLB, which reproduced many of the structural and functional properties of the native membrane-soluble protein. While the full-length WSPLB forms a pentamer in solution, a truncated variant forms very stable tetramers. To obtain insight into the tetramer-pentamer cytoplasmic switch, we solved the crystal structure of the truncated construct, WSPLB 21-52. This peptide has a heptad sequence repeat with Leu residues at a- and Ile at d-positions from residues 31-52. The crystal structure revealed that WSPLB 21-52 adopted an antiparallel tetrameric coiled coil. This topology contrasts with the parallel topology of an analogue of the coiled-coil of GCN4 with the same Leu(a) Ile(d) repeat. Analysis of these structures revealed how the nature of the partially exposed residues at e- and g-positions influence the topology formed by the bundle. We also constructed a model for the pentameric form of PLB using the coiled-coil parameters derived from a single monomer in the tetrameric structure. This model suggests that both buried and interfacial hydrogen bonds are important for stabilizing the parallel pentamer.     

Coiled coil in the stalk region of ncd motor protein is nonlocally sustained

The dimeric structure of kinesin superfamily proteins plays an important role in their motile functions and characteristics. In this study, the coiled-coil-forming property of the stalk region (192-346) of Drosophila ncd, a C-terminal kinesin motor protein, was investigated by synthesizing various peptide fragments. The alpha helicity of a set of 46-residue peptides spanning the stalk region appeared too low to form a coiled-coil dimer, probably because of insufficient continuity of the hydrophobic residues at (a and d) core positions in amphipathic heptad repeats. On the other hand, several peptides with leucine residues introduced at core positions or with extensional sequences with high alpha helicity had an advantage in coiled-coil formation. When we analyzed the thermal and urea-induced unfolding of these dimeric peptides, we identified four domains having a relatively high potential to form coiled coils. Among them, three domains on the C-terminal side of the stalk region, i.e., (252-272), (276-330), and (336-346), were in the same heptad frame, although these potential coiled-coil domains were not self-sustaining individually. This is in sharp contrast to the fragment of human kinesin, (332-369), which has an extremely high tendency toward coiled-coil formation. One of the possible triggers for coiled-coil formation of the ncd stalk region may be the interaction between the motor domain and the C-terminal part of the stalk as previously revealed by X-ray crystallography. The residues, S331 and R335, seem to act as a breaking point for alpha-helix continuity. This would make the region (336-346), as the head-stalk joint, more flexible such as seen with a plus-end-directed kinesin, if this region had no interaction with the motor domain. These characteristic differences between ncd and kinesin suggest that the nonlocally sustained coiled coil of ncd is one of the factors important for minus-end-directed motility.     

Secondary structure of component 8c-1 of alpha-keratin. An analysis of the amino acid sequence.

The amino acid sequence of component 8c-1 from alpha-keratin was analysed by using secondary-structure prediction techniques, homology search methods, fast Fourier-transform techniques to detect regularities in the linear disposition of amino acids, interaction counts to assess possible modes of chain aggregation and assessment of hydrophilicity distribution. The analyses show the following. The molecule has two lengths of coiled-coil structure, each about 20 nm long, one from residues 56-202 with a discontinuity from about residue 91 to residue 101, and the other from residues 219-366 with discontinuities from about residue 238 to residue 245 and at about residue 306. The acidic and basic residues in the coiled-coil segment between residues 102 and 202 show a 9,4-residue structural period in their linear disposition, whereas between residues 246 and 366 a period of 9.9 residues is observed in the positioning of ionic residues. Acidic and basic residues are out of phase by 180 degrees. Similar repeats occur in corresponding regions of other intermediate-filament proteins. The overall mean values for the repeats are 9.55 residues in the N-terminal region and 9.85 residues in the C-terminal region. The regions at each end of the protein chain (residues 1-55 and 367-412) are not alpha-helical and contain many potential beta-bends. The regions specified in have a significant degree of homology mainly due to a semi-regular disposition of proline and half-cystine residues on a three-residue grid; this is especially apparent in the C-terminal segment, in which short (Pro-Cys-Xaa)n regions occur. The coiled-coil segments of component 8c-1 bear a striking similarity to corresponding segments of other intermediate-filament proteins as regards sequence homology, structural periodicity of ionic residues and secondary/tertiary-structure predictions. The assessments of the probabilities that these homologies occurred by chance indicate that there are two populations of keratin filament proteins. The non-coiled-coil regions at each end of the chain are less hydrophilic than the coiled-coil regions. Ionic interactions between the heptad regions of components 8c-1 and 7c from the microfibrils of alpha-keratin are optimized when a coiled-coil structure is formed with the heptad regions of the constituent chains both parallel and in register.     

Mapping of the laminin-binding site of the N-terminal agrin domain (NtA)

Agrin is a key organizer of acetylcholine receptor (AChR) clustering at the neuromuscular junction. The binding of agrin to laminin is required for its localization to synaptic basal lamina and other basement membranes. The high-affinity interaction with the coiled-coil domain of laminin is mediated by the N-terminal domain of agrin. We have adopted a structurally guided site-directed mutagenesis approach to map the laminin-binding site of NtA. Mutations of L117 and V124 in the C-terminal helix 3 showed that they are crucial for binding. Both residues are located in helix 3 and face the groove between the beta-barrel and the C-terminal helical segment of NtA. Remarkably, the distance between both residues matches a heptad repeat distance of two aliphatic residues which are solvent exposed in the coiled-coil domain of laminin. A lower but significant contribution originates from R43 and a charged cluster (E23, E24 and R40) at the open face of the beta-barrel structure. We propose that surface-exposed, conserved residues of the laminin gamma1 chain interact with NtA via hydrophobic and ionic interactions.     

Conformational specificity of the lac repressor coiled-coil tetramerization domain

Predictive understanding of how the folded, functional shape of a native protein is encoded in the linear sequence of its amino acid residues remains an unsolved challenge in modern structural biology. Antiparallel four-stranded coiled coils are relatively simple protein structures that embody a heptad sequence repeat and rich diversity for tertiary packing of alpha-helices. To explore specific sequence determinants of the lac repressor coiled-coil tetramerization domain, we have engineered a set of buried nonpolar side chains at the a-, d-, and e-positions into the hydrophobic interior of the dimeric GCN4 leucine zipper. Circular dichroism and equilibrium ultracentrifugation studies show that this core variant (GCN4-pAeLV) forms a stable tetrameric structure with a reversible and highly cooperative thermal unfolding transition. The X-ray crystal structure at 1.9 A reveals that GCN4-pAeLV is an antiparallel four-stranded coiled coil of the lac repressor type in which the a, d, and e side chains associate by means of combined knobs-against-knobs and knobs-into-holes packing with a characteristic interhelical offset of 0.25 heptad. Comparison of the side chain shape and packing in the antiparallel tetramers shows that the burial of alanine residues at the e positions between the neighboring helices of GCN4-pAeLV dictates both the antiparallel orientation and helix offset. This study fills in a gap in our knowledge of the determinants of structural specificity in antiparallel coiled coils and improves our understanding of how specific side chain packing forms the teritiary structure of a functional protein.     

Human and Xenopus cingulin share a modular organization of the coiled-coil rod domain: predictions for intra- and intermolecular assembly

The complete nucleotide and derived amino acid sequences of Homo sapiens cingulin cDNA (5143 bp) were determined by sequencing two distinct EST clones that showed significant sequence homology to Xenopus laevis cingulin. Protein sequence analysis indicates that the molecule contains two chains and has a tripartite structure with N-terminal (head) domains, a coiled-coil rod domain (length, 120 nm), and short C-terminal (tail) domains. Human and Xenopus cingulin heads are only 33% identical, yet a human cingulin N-terminal fragment still interacts with canine ZO-1 and ZO-2 in vitro. The rod domain contains two A and two B subdomains, though it lacks the third B subdomain present in Xenopus cingulin. The heptad substructures of Xenopus and human cingulins were further characterized by computer analysis and indicated that the two-stranded coiled-coil structure contained chains that were parallel and in axial register. Fast Fourier transform analysis and a scoring technique designed to recognize potential interactions between different supramolecular arrangements suggests that cingulin dimers may further assemble through antiparallel interactions between the last approximately 100 amino acids of the coiled-coil region. Cingulin mRNA ( approximately 5.2 kb) was detected by Northern blotting in epithelial tissues. A human cingulin EST was mapped to chromosome 1q21 using the UniGene database.     

A salt bridge between an N-terminal coiled coil of gp41 and an antiviral agent targeted to the gp41 core is important for anti-HIV-1 activity

HIV-1 envelope glycoprotein transmembrane subunit gp41 play a critical role in the fusion of viral and target cell membranes. The gp41 C-terminal heptad repeat region interacts with the N-terminal coiled-coil region to form a six-stranded core structure. Peptides derived from gp41 C-terminal heptad repeat region (C-peptides) are potent HIV-1 entry inhibitors by binding to gp41 N-terminal coiled-coil region. Most recently, we have identified two small organic compounds that inhibit HIV-1-mediated membrane fusion by blocking the formation of gp41 core. These two active compounds contain both hydrophobic and acidic groups while the inactive compounds only have hydrophobic groups. Analysis by computer modeling indicate that the acidic groups in the active compounds can form salt bridge with Lys 574 in the N-terminal coiled-coil region of gp41. Asp 632 in a C-peptide can also form a salt bridge with Lys 574. Replacement of Asp 632 with positively charged residues or hydrophobic residues resulted in significant decrease of HIV-1 inhibitory activity. These results suggest that a salt bridge between an N-terminal coiled coil of the gp41 and an antiviral agent targeted to the gp41 core is important for anti-HIV-1 activity.     

Trimeric, coiled-coil extension on peptide fusion inhibitor of HIV-1 influences selection of resistance pathways

Peptides corresponding to N- and C-terminal heptad repeat regions (HR1 and HR2, respectively) of viral fusion proteins can block infection of viruses in a dominant negative manner by interfering with refolding of the viral HR1 and HR2 to form a six-helix bundle (6HB) that drives fusion between viral and host cell membranes. The 6HB of the HIV gp41 (endogenous bundle) consists of an HR1 coiled-coil trimer with grooves lined by antiparallel HR2 helices. HR1 peptides form coiled-coil oligomers that may bind to gp41 HR2 as trimers to form a heterologous 6HB (inhibitor bundle) or to gp41 HR1 as monomers or dimers to form a heterologous coiled coil. To gain insights into mechanisms of Env entry and inhibition by HR1 peptides, we compared resistance to a peptide corresponding to 36 residues in gp41 HR1 (N36) and the same peptide with a coiled-coil trimerization domain fused to its N terminus (IZN36) that stabilizes the trimer and increases inhibitor potency (Eckert, D. M., and Kim, P. S. (2001) Proc. Nat. Acad. Sci. U.S.A. 98, 11187-11192). Whereas N36 selected two genetic pathways with equal probability, each defined by an early mutation in either HR1 or HR2, IZN36 preferentially selected the HR1 pathway. Both pathways conferred cross-resistance to both peptides. Each HR mutation enhanced the thermostability of the endogenous 6HB, potentially allowing the virus to simultaneously escape inhibitors targeting either gp41 HR1 or HR2. These findings inform inhibitor design and identify regions of plasticity in the highly conserved gp41 that modulate virus entry and escape from HR1 peptide inhibitors.     

Bacterial osmosensing: roles of membrane structure and electrostatics in lipid-protein and protein-protein interactions

Bacteria act to maintain their hydration when the osmotic pressure of their environment changes. When the external osmolality decreases (osmotic downshift), mechanosensitive channels are activated to release low molecular weight osmolytes (and hence water) from the cytoplasm. Upon osmotic upshift, osmoregulatory transporters are activated to import osmolytes (and hence water). Osmoregulatory channels and transporters sense and respond to osmotic stress via different mechanisms. Mechanosensitive channel MscL senses the increasing tension in the membrane and appears to gate when the lateral pressure in the acyl chain region of the lipids drops below a threshold value. Transporters OpuA, BetP and ProP are activated when increasing external osmolality causes threshold ionic concentrations in excess of about 0.05 M to be reached in the proteoliposome lumen. The threshold activation concentrations for the OpuA transporter are strongly dependent on the fraction of anionic lipids that surround the cytoplasmic face of the protein. The higher the fraction of anionic lipids, the higher the threshold ionic concentrations. A similar trend is observed for the BetP transporter. The lipid dependence of osmotic activation of OpuA and BetP suggests that osmotic signals are transmitted to the protein via interactions between charged osmosensor domains and the ionic headgroups of the lipids in the membrane. The charged, C-terminal domains of BetP and ProP are important for osmosensing. The C-terminal domain of ProP participates in homodimeric coiled-coil formation and it may interact with the membrane lipids and soluble protein ProQ. The activation of ProP by lumenal, macromolecular solutes at constant ionic strength indicates that its structure and activity may also respond to macromolecular crowding. This excluded volume effect may restrict the range over which the osmosensing domain can electrostatically interact. A simplified version of the dissociative double layer theory is used to explain the activation of the transporters by showing how changes in ion concentration could modulate interactions between charged osmosensor domains and charged lipid or protein surfaces. Importantly, the relatively high ionic concentrations at which osmosensors become activated at different surface charge densities compare well with the predicted dependence of 'critical' ion concentrations on surface charge density. The critical ion concentrations represent transitions in Maxwellian ionic distributions at which the surface potential reaches 25.7 mV for monovalent ions. The osmosensing mechanism is qualitatively described as an "ON/OFF switch" representing thermally relaxed and electrostatically locked protein conformations.     

Coiled-coil domains in glycoproteins B and H are involved in human cytomegalovirus membrane fusion

Human cytomegalovirus (CMV) utilizes a complex route of entry into cells that involves multiple interactions between viral envelope proteins and cellular receptors. Three conserved viral glycoproteins, gB, gH, and gL, are required for CMV-mediated membrane fusion, but little is known of how these proteins cooperate during entry (E. R. Kinzler and T. Compton, submitted for publication). The goal of this study was to begin defining the molecular mechanisms that underlie membrane fusion mediated by herpesviruses. We identified heptad repeat sequences predicted to form alpha-helical coiled coils in two glycoproteins required for fusion, gB and gH. Peptides derived from gB and gH containing the heptad repeat sequences inhibited virus entry when introduced coincident with virus inoculation onto cells or when mixed with virus prior to inoculation. Neither peptide affected binding of CMV to fibroblasts, suggesting that the peptides inhibit membrane fusion. Both gB and gH coiled-coil peptides blocked entry of several laboratory-adapted and clinical strains of human CMV, but neither peptide affected entry of murine CMV or herpes simplex virus type 1 (HSV-1). Although murine CMV and HSV-1 gB and gH have heptad repeat regions, the ability of human CMV gB and gH peptides to inhibit virus entry correlates with the specific residues that comprise the heptad repeat region. The ability of gB and gH coiled-coil peptides to inhibit virus entry independently of cell contact suggests that the coiled-coil regions of gB and gH function differently from those of class I, single-component fusion proteins. Taken together, these data support a critical role for alpha-helical coiled coils in gB and gH in the entry pathway of CMV.