The structure of the aquaporin-1 water channel: a comparison between cryo-electron microscopy and X-ray crystallography

Three different medium-resolution structures of the human water channel aquaporin-1 (AQP1) have been solved by cryo-electron microscopy (cryo-EM) during the last two years. Recently, the structure of the strongly related bovine AQP1 was solved by X-ray crystallography at higher resolution, allowing a validation of the original medium-resolution structures, and providing a good indication for the strengths and limitations of state of the art cryo-EM methods. We present a detailed comparison between the different models, which shows that overall, the structures are highly similar, deviating less than 2.5 A from each other in the helical backbone regions. The two original cryo-EM structures, however, also show a number of significant deviations from the X-ray structure, both in the backbone positions of the transmembrane helices and in the location of the amino acid side-chains facing the pore. In contrast, the third cryo-EM structure that included information from the X-ray structure of the homologous bacterial glycerol facilitator GlpF and that was subsequently refined against cryo-EM AQP1 data, shows a root mean square deviation of 0.9A from the X-ray structure in the helical backbone regions.     

Fibrinogen structure in projection at 18 A resolution. Electron density by co-ordinated cryo-electron microscopy and X-ray crystallography

Electron microscope images of frozen-hydrated crystals of a proteolytically modified fibrinogen show excellent preservation of the structure. An electron density map of the key centric projection of the crystal at 18 A resolution has been obtained by combining the phases derived from cryo-electron microscopy with X-ray amplitudes. Simulation methods developed in earlier studies have been used to interpret the map. In contrast to the earlier images, the map allows us to visualize the coiled-coil region of the molecule and possible substructure in the beta domains. The map also shows that there is a marked difference in density in the two regions corresponding to the molecular ends where the gamma domains interact. A possible interpretation of this finding is provided by assuming substructure in the gamma domains and the breaking of molecular symmetry where these domains interact. Some additional constraints useful for the determination of the three-dimensional structure were obtained from cryo-electron micrographs of a perpendicular view at 25 A resolution. Implications of this working model for the molecular length and contacts in the filaments in both the crystal and fibrin are described. The data used here will be valuable as a starting point for obtaining the three-dimensional structure.     

Type IV pilin structure and assembly: X-ray and EM analyses of Vibrio cholerae toxin-coregulated pilus and Pseudomonas aeruginosa PAK pilin

Pilin assembly into type IV pili is required for virulence by bacterial pathogens that cause diseases such as cholera, pneumonia, gonorrhea, and meningitis. Crystal structures of soluble, N-terminally truncated pilin from Vibrio cholera toxin-coregulated pilus (TCP) and full-length PAK pilin from Pseudomonas aeruginosa reveal a novel TCP fold, yet a shared architecture for the type IV pilins. In each pilin subunit a conserved, extended, N-terminal alpha helix wrapped by beta strands anchors the structurally variable globular head. Inside the assembled pilus, characterized by cryo-electron microscopy and crystallography, the extended hydrophobic alpha helices make multisubunit contacts to provide mechanical strength and flexibility. Outside, distinct interactions of adaptable heads contribute surface variation for specificity of pilus function in antigenicity, motility, adhesion, and colony formation.     

Understanding ribosome assembly: the structure of in vivo assembled immature 30S subunits revealed by cryo-electron microscopy

Four decades after early in vitro assembly studies demonstrated that ribosome assembly is a controlled process, our understanding of ribosome assembly is still incomplete. Just as structure determination has been so important to understanding ribosome function, so too will it be critical to sorting out the assembly process. Here, we used a viable deletion in the yjeQ gene, a recognized ribosome assembly factor, to isolate and structurally characterize immature 30S subunits assembled in vivo. These small ribosome subunits contained unprocessed 17S rRNA and lacked some late ribosomal proteins. Cryo-electron microscopy reconstructions revealed that the presence of precursor sequences in the rRNA induces a severe distortion in the 3' minor domain of the subunit involved in the decoding of mRNA and interaction with the large ribosome subunit. These findings suggest that rRNA processing events induce key local conformational changes directing the structure toward the mature assembly. We concluded that rRNA processing, folding, and the entry of tertiary r-proteins are interdependent events in the late stages of 30S subunit assembly. In addition, we demonstrate how studies of emerging assembly factors in ribosome biogenesis can help to elucidate the path of subunit assembly in vivo.     

Substitutions in the N-terminal alpha helical spine of Neisseria gonorrhoeae pilin affect Type IV pilus assembly, dynamics and associated functions

Type IV pili (Tfp) are multifunctional surface appendages expressed by many Gram negative species of medical, environmental and industrial importance. The N-terminally localized, so called alpha-helical spine is the most conserved structural feature of pilin subunits in these organelles. Prevailing models of pilus assembly and structure invariably implicate its importance to membrane trafficking, organelle structure and related functions. Nonetheless, relatively few studies have examined the effects of missense substitutions within this domain. Using Neisseria gonorrhoeae as a model system, we constructed mutants with single and multiple amino acid substitutions localized to this region of the pilin subunit PilE and characterized them with regard to pilin stability, organelle expression and associated phenotypes. The consequences of simultaneous expression of the mutant and wild-type PilE forms were also examined. The findings document for the first time in a defined genetic background the phenomenon of pilin intermolecular complementation in which assembly defective pilin can be rescued into purifiable Tfp by coexpression of wild-type PilE. The results further demonstrate that pilin subunit composition can impact on organelle dynamics mediated by the PilT retraction protein via a process that appears to monitor the efficacy of subunit-subunit interactions. In addition to confirming and extending the evidence for PilE multimerization as an essential component for competence for natural genetic transformation, this work paves the way for detailed studies of Tfp subunit-subunit interactions including self-recognition within the membrane and packing within the pilus polymer.     

Three-dimensional structure of the native spliceosome by cryo-electron microscopy

Splicing of pre-mRNA occurs in a multicomponent macromolecular machine--the spliceosome. The spliceosome can be assembled in vitro by a stepwise assembly of a number of snRNPs and additional proteins on exogenously added pre-mRNA. In contrast, splicing in vivo occurs in preformed particles where endogenous pre-mRNAs are packaged with all five spliceosomal U snRNPs (penta-snRNP) together with other splicing factors. Here we present a three-dimensional image reconstruction by cryo-electron microscopy of native spliceosomes, derived from cell nuclei, at a resolution of 20 angstroms. The structure revealed an elongated globular particle made up of two distinct subunits connected to each other leaving a tunnel in between. We show here that the larger subunit is a suitable candidate to accommodate the penta-snRNP, and that the tunnel could accommodate the pre-mRNA component of the spliceosome. The features this structure reveals provide new insight into the global architecture of the native splicing machine.     

Type IV pilus biogenesis in Neisseria meningitidis: PilW is involved in a step occurring after pilus assembly, essential for fibre stability and function

Type IV pili (Tfp) play a critical role in the pathogenic lifestyle of Neisseria meningitidis and N. gonorrhoeae, notably by facilitating bacterial attachment to human cells, but our understanding of their biogenesis, during which the fibres are assembled in the periplasm, then emerge onto the cell surface and are stabilized, remains fragmentary. We therefore sought to identify the genes required for Tfp formation in N. meningitidis by screening a genome-wide collection of mutants for those that were unable to form aggregates, another phenotype mediated by these organelles. Fifteen proteins, of which only seven were previously characterized, were found to be essential for Tfp biogenesis. One novel component, named PilW, was studied in more detail. We found that PilW is an outer-membrane protein necessary for the stabilization of the fibres but not for their assembly or surface localization, because Tfp could be restored on the surface in a pilW mutant by a mutation in the twitching motility gene pilT. However, Tfp-linked properties, including adherence to human cells, were not restored in a pilW/T mutant, which suggests that PilW is also essential for the functionality of the fibres. Together with the finding that PilW is important for the stability of PilQ multimers, our results extend the current model for Tfp biogenesis by suggesting that a multiprotein machinery in the outer-membrane is involved in the terminal stage of Tfp biogenesis during which growing fibres are not only stabilized, but also become perfectly functional.     

The three-dimensional structure of reovirus obtained by cryo-electron microscopy.

The structures of reovirus serotypes T2J (Jones), T3D (Dearing) and the T3D core particle have been determined by cryo-electron microscopy and image processing. At a resolution of 30 A the two serotypes have similar features. The core is visible within the virus structure. The outer surface of the virus particles contains 120 holes at T = 13.1 local 6-fold axes. The holes penetrate into the virus as far as the surface of the internal core shell. Protrusions extending 4 nm from the virus surface surround each hole on the outside of the virus. At the 5-fold axes on the surface of the virus flat 'penton craters' form covers over the underlying core spikes. The detailed structure of the reovirus shell is very different to that of rotavirus although both have holes at T = 13.1 axes. Little evidence was seen of reovirus fibres extending from the virus surface.     

Cloning of an Aeromonas hydrophila type IV pilus biogenesis gene cluster: complementation of pilus assembly functions and characterization of a type IV leader peptidase/N-methyltransferase required for extracellular protein secretion

Aeromonas hydrophila secretes several extracellular proteins that are associated with virulence including an enterotoxin, a protease, and the hole-forming toxin, aerolysin. These degradative enzymes and toxins are exported by a conserved pathway found in many Gram-negative bacteria. In Pseudomonas aeruginosa this export pathway and type IV pilus biogenesis are dependent on the product of the pilD gene. PilD is a bifunctional enzyme that processes components of the extracellular secretory pathway as well as a type IV prepilin. An A. hydrophila genomic library was transferred into a P. aeruginosa pilD mutant that is defective for type IV pilus biogenesis. The A. hydrophila pilD homologue, tapD , was identified by its ability to complement the pilD mutation in P. aeruginosa . Transconjugants containing tapD were sensitive to the type IV pilus-specific phage, PO4. Sequence data revealed that tapD is part of a cluster of genes ( tapABCD ) that are homologous to P. aeruginosa type IV pilus biogenesis genes ( pilABCD ). We showed that TapB and TapC are functionally homologous to P. aeruginosa PilB and PilC, the first such functional complementation of pilus assembly demonstrated between bacteria that express type IV pili. In vitro studies revealed that TapD has both endopeptidase and N -methyltransferase activities using P. aeruginosa prepilin as substrate. Furthermore, we show that tapD is required for extracellular secretion of aerolysin and protease, indicating that tapD may play an important role in the virulence of A. hydrophila     

Type IV pilus assembly in Pseudomonas aeruginosa over a broad range of cyclic di-GMP concentrations

Pseudomonas aeruginosa is a Gram-negative, opportunistic pathogen that utilizes polar type IV pili (T4P) for twitching motility and adhesion in the environment and during infection. Pilus assembly requires FimX, a GGDEF/EAL domain protein that binds and hydrolyzes cyclic di-GMP (c-di-GMP). Bacteria lacking FimX are deficient in twitching motility and microcolony formation. We carried out an extragenic suppressor screen in PA103ΔfimX bacteria to identify additional regulators of pilus assembly. Multiple suppressor mutations were mapped to PA0171, PA1121 (yfiR), and PA3703 (wspF), three genes previously associated with small-colony-variant phenotypes. Multiple independent techniques confirmed that suppressors assembled functional surface pili, though at both polar and nonpolar sites. Whole-cell c-di-GMP levels were elevated in suppressor strains, in agreement with previous studies that had shown that the disrupted genes encoded negative regulators of diguanylate cyclases. Overexpression of the regulated diguanylate cyclases was sufficient to suppress the ΔfimX pilus assembly defect, as was overexpression of an unrelated diguanylate cyclase from Caulobacter crescentus. Furthermore, under natural conditions of high c-di-GMP, PA103ΔfimX formed robust biofilms that showed T4P staining and were structurally distinct from those formed by nonpiliated bacteria. These results are the first demonstration that P. aeruginosa assembles a surface organelle, type IV pili, over a broad range of c-di-GMP concentrations. Assembly of pili at low c-di-GMP concentrations requires a polarly localized c-di-GMP binding protein and phosphodiesterase, FimX; this requirement for FimX is bypassed at high c-di-GMP concentrations. Thus, P. aeruginosa can assemble the same surface organelle in distinct ways for motility or adhesion under very different environmental conditions.     

Purification and three-dimensional electron microscopy structure of the Neisseria meningitidis type IV pilus biogenesis protein PilG

Type IV pili are surface-exposed retractable fibers which play a key role in the pathogenesis of Neisseria meningitidis and other gram-negative pathogens. PilG is an integral inner membrane protein and a component of the type IV pilus biogenesis system. It is related by sequence to the extensive GspF family of secretory proteins, which are involved in type II secretion processes. PilG was overexpressed and purified from Escherichia coli membranes by detergent extraction and metal ion affinity chromatography. Analysis of the purified protein by perfluoro-octanoic acid polyacrylamide gel electrophoresis showed that PilG formed dimers and tetramers. A three-dimensional (3-D) electron microscopy structure of the PilG multimer was determined using single-particle averaging applied to samples visualized by negative staining. Symmetry analysis of the unsymmetrized 3-D volume provided further evidence that the PilG multimer is a tetramer. The reconstruction also revealed an asymmetric bilobed structure approximately 125 A in length and 80 A in width. The larger lobe within the structure was identified as the N terminus by location of Ni-nitrilotriacetic acid nanogold particles to the N-terminal polyhistidine tag. We propose that the smaller lobe corresponds to the periplasmic domain of the protein, with the narrower "waist" region being the transmembrane section. This constitutes the first report of a 3-D structure of a member of the GspF family and suggests a physical basis for the role of the protein in linking cytoplasmic and periplasmic protein components of the type II secretion and type IV pilus biogenesis systems.     

Motility in cyanobacteria: polysaccharide tracks and Type IV pilus motors

Motility in cyanobacteria is useful for purposes that range from seeking out favourable light environments to establishing symbioses with plants and fungi. No known cyanobacterium is equipped with flagella, but a diverse range of species is able to ‘glide’ or ‘twitch’ across surfaces. Cyanobacteria with this capacity range from unicellular species to complex filamentous forms, including species such as Nostoc punctiforme, which can generate specialised motile filaments called hormogonia. Recent work on the model unicellular cyanobacterium Synechocystis sp. PCC 6803 has shown that its means of propulsion has much in common with the twitching motility of heterotrophs such as Pseudomonas and Myxococcus. Movement depends on Type IV pili, which are extended, adhere to the substrate and then retract to pull the cell across the surface. Previous work on filamentous cyanobacteria suggested a very different mechanism, with movement powered by the directional extrusion of polysaccharide from pores close to the cell junctions. Now a new report by Khayatan and colleagues in this issue of Molecular Microbiology suggests that the motility of Nostoc hormogonia has much more in common with Synechocystis than was previously thought. In both cases, polysaccharide secretion is important for preparing the surface, but the directional motive force comes from Type IV pili.     

The type IV pilus assembly complex: biogenic interactions among the bundle-forming pilus proteins of enteropathogenic Escherichia coli

Production of type IV bundle-forming pili (BFP) by enteropathogenic Escherichia coli (EPEC) requires the protein products of 12 genes of the 14-gene bfp operon. Antisera against each of these proteins were used to demonstrate that in-frame deletion of individual genes within the operon reduces the abundance of other bfp operon-encoded proteins. This result was demonstrated not to be due to downstream polar effects of the mutations but rather was taken as evidence for protein-protein interactions and their role in the stabilization of the BFP assembly complex. These data, combined with the results of cell compartment localization studies, suggest that pilus formation requires the presence of a topographically discrete assembly complex that is composed of BFP proteins in stoichiometric amounts. The assembly complex appears to consist of an inner membrane component containing three processed, pilin-like proteins, BfpI, -J, and -K, that localize with BfpE, -L, and -A (the major pilin subunit); an outer membrane, secretin-like component, BfpB and -G; and a periplasmic component composed of BfpU. Of these, only BfpL consistently localizes with both the inner and outer membranes and thus, together with BfpU, may articulate between the Bfp proteins in the inner membrane and outer membrane compartments.     

The three-dimensional structure of Infectious flacherie virus capsid determined by cryo-electron microscopy

Cryo-electron microscopy and image reconstruction were used to determine the three-dimensional structure of Infectious flacherie virus (IFV). 5047 particles were selected for the final reconstruction. The FSC curve showed that the resolution of this capsid structure was 18 Å. The structure is a psuedo T=3 (P=3) icosahedral capsid with a diameter of 302.4 Å and a single shell thickness of 15 Å. The density map showed that IFV has a smooth surface without any prominent protrude or depression. Comparison of the IFV structure with those of the insect picorna-like virus-Cricket paralysis virus (CrPV)and human picornavirus-Human rhinovirus 14 (HRV 14) revealed that the IFV structure resembles the CrPV structure. The “Rossmann canyon” is absent in both IFV and CrPV particles. The polypeptide topology of IFV VP2, IFV VP3 was predicted and the subunit location at the capsid surface was further analyzed.     

Structure of the pilus assembly protein TadZ from Eubacterium rectale: implications for polar localization

The tad (tight adherence) locus encodes a protein translocation system that produces a novel variant of type IV pili. The pilus assembly protein TadZ (called CpaE in Caulobacter crescentus) is ubiquitous in tad loci, but is absent in other type IV pilus biogenesis systems. The crystal structure of TadZ from Eubacterium rectale (ErTadZ), in complex with ATP and Mg²⁺, was determined to 2.1 Å resolution. ErTadZ contains an atypical ATPase domain with a variant of a deviant Walker‐A motif that retains ATP binding capacity while displaying only low intrinsic ATPase activity. The bound ATP plays an important role in dimerization of ErTadZ. The N‐terminal atypical receiver domain resembles the canonical receiver domain of response regulators, but has a degenerate, stripped‐down ‘active site’. Homology modelling of the N‐terminal atypical receiver domain of CpaE indicates that it has a conserved protein–protein binding surface similar to that of the polar localization module of the social mobility protein FrzS, suggesting a similar function. Our structural results also suggest that TadZ localizes to the pole through the atypical receiver domain during an early stage of pili biogenesis, and functions as a hub for recruiting other pili components, thus providing insights into the Tad pilus assembly process.     

The 13 angstroms structure of a chaperonin GroEL-protein substrate complex by cryo-electron microscopy

The 13 angstroms resolution structures of GroEL bound to a single monomer of the protein substrate glutamine synthetase (GS(m)), as well as that of unliganded GroEL have been determined from a heterogeneous image population using cryo-electron microscopy (cryo-EM) coupled with single-particle image classification and reconstruction techniques. We combined structural data from cryo-EM maps and dynamic modeling, taking advantage of the known X-ray crystallographic structure and normal mode flexible fitting (NMFF) analysis, to describe the changes that occur in GroEL structure induced by GS(m) binding. The NMFF analysis reveals that the molecular movements induced by GS(m) binding propagate throughout the GroEL structure. The modeled molecular motions show that some domains undergo en bloc movements, while others show more complex independent internal movements. Interestingly, the substrate-bound apical domains of both the cis (GS(m)-bound ring) and trans (the opposite substrate-free ring) show counterclockwise rotations, in the same direction (though not as dramatic) as those documented for the ATP-GroEL-induced structure changes. The structural changes from the allosteric substrate protein-induced negative cooperativity between the GroEL rings involves upward concerted movements of both cis and trans equatorial domains toward the GS(m)-bound ring, while the inter-ring distances between the heptamer contact residues are maintained. Furthermore, the NMFF analysis identifies the secondary structural elements that are involved in the observed approximately 5 angstroms reduction in the diameter of the cavity opening in the unbound trans ring. Understanding the molecular basis of these substrate protein-induced structural changes across the heptamer rings provides insight into the origins of the allosteric negative cooperative effects that are transmitted over long distances (approximately 140 angstroms).