Efficiency of embryoid body formation and hematopoietic development from embryonic stem cells in different culture systems

Embryonic stem (ES) cells have tremendous potential as a cell source for cell-based therapies. Realization of that potential will depend on our ability to understand and manipulate the factors that influence cell fate decisions and to develop scalable methods of cell production. We compared four standard ES cell differentiation culture systems by measuring aspects of embryoid body (EB) formation efficiency and cell proliferation, and by tracking development of a specific differentiated tissue type-blood-using functional (colony-forming cell) and phenotypic (Flk-1 and CD34 expression) assays. We report that individual murine ES cells form EBs with an efficiency of 42 +/- 9%, but this value is rarely obtained because of EB aggregation-a process whereby two or more individual ES cells or EBs fuse to form a single, larger cell aggregate. Regardless of whether EBs were generated from a single ES cell in methylcellulose or liquid suspension culture, or aggregates of ES cells in hanging drop culture, they grew to a similar maximum cell number of 28,000 +/- 9,000 cells per EB. Among the three methods for EB generation in suspension culture there were no differences in the kinetics or frequency of hematopoietic development. Thus, initiating EBs with a single ES cell and preventing EB aggregation should allow for maximum yield of differentiated cells in the EB system. EB differentiation cultures were also compared to attached differentiation culture using the same outputs. Attached colonies were not similarly limited in cell number; however, hematopoietic development in attached culture was impaired. The percentage of early Flk-1 and CD34 expressing cells was dramatically lower than in EBs cultured in suspension, whereas hematopoietic colony formation was almost completely inhibited. These results provide a foundation for development of efficient, scalable bioprocesses for ES cell differentiation, and inform novel methods for the production of hematopoietic tissues.     

Gene expression profiles during early differentiation of mouse embryonic stem cells

Background  

Understanding the mechanisms controlling stem cell differentiation is the key to future advances in tissue and organ regeneration. Embryonic stem (ES) cell differentiation can be triggered by embryoid body (EB) formation, which involves ES cell aggregation in suspension. EB growth in the absence of leukaemia inhibitory factor (LIF) leads EBs to mimic early embryonic development, giving rise to markers representative of endoderm, mesoderm and ectoderm. Here, we have used microarrays to investigate differences in gene expression between 3 undifferentiated ES cell lines, and also between undifferentiated ES cells and Day 1–4 EBs     

Generation of hybrid hepatocytes by cell fusion from monkey embryoid body cells in the injured mouse liver

Monkey embryonic stem (ES) cells have characteristics that are similar to human ES cells, and might be useful as a substitute model for preclinical research. When embryoid bodies (EBs) formed from monkey ES cells were cultured, expression of many hepatocyte-related genes including cytochrome P450 (Cyp) 3a and Cyp7a1 was observed. Hepatocytes were immunocytochemically observed using antibodies against albumin (ALB), cytokeratin-8/18, and α1-antitrypsin in the developing EBs. The in vitro differentiation potential of monkey ES cells into the hepatic lineage prompted us to examine the transplantability of monkey EB cells. As an initial approach to assess the repopulation potential, we transplanted EB cells into immunodeficient urokinase-type plasminogen activator transgenic mice that undergo liver failure. After transplantation, the hepatocyte colonies expressing monkey ALB were observed in the mouse liver. Fluorescence in-situ hybridization revealed that the repopulating hepatocytes arise from cell fusion between transplanted monkey EB cells and recipient mouse hepatocytes. In contrast, neither cell fusion nor repopulation of hepatocytes was observed in the recipient liver after undifferentiated ES cell transplantation. These results indicate that the differentiated cells in developing monkey EBs, but not contaminating ES cells, generate functional hepatocytes by cell fusion with recipient mouse hepatocytes, and repopulate injured mouse liver.     

应用旋转生物反应器批量制备拟胚体的研究

以小鼠胚胎干细胞(ES-D3)为模型,应用新型细胞培养系统——STLV型旋转生物反应器(rotarycellculturesystem,RCCS)建立一种批量制备拟胚体(embryoidbodies,EBs)的新方法,研究不同细胞接种密度及培养时间对RCCS内EBs产生效率的影响。为了进一步研究该制备方法是否对EBs的分化潜能产生影响,对照传统方法制备的EBs,利用形态学及RT-PCR方法测定经旋转生物反应器制备的EBs在自发性或诱导条件下(1%DMSO)向心肌细胞的分化能力。结果表明:ES-D3在RCCS内能够高效形成EBs,与传统的直接悬浮法比较,其EBs的形成效率可达到后者的2倍。1×104个/ml为最佳细胞接种密度,培养时间也是在RCCS制备EBs过程中的重要因素之一,培养第4~5天为最佳收获EBs的时间。与悬滴法制备的EBs比较,该方法制备的EBs分化为心肌细胞的潜能未改变。由此,应用旋转生物反应器可以高效制备EBs,该方法制备的EBs可以用于发育生物学等基础及应用领域的相关研究。     

长期培养小鼠胚胎干细胞拟胚体(EB)的观察

胚胎干细胞在体外培养条件下能够维持自我更新,并具有向多种细胞类型分化的能力,因此被广泛用于研究细胞分化的分子机理以及药物筛选.形成拟胚体(Embryoid body,EB)是胚胎干细胞分化常用的技术手段.为了便于今后利用EB做进一步的药物筛选及分化研究,严格规范了形成EB的条件,得到了分化状态均一性很高的EB.利用这一条件,观察到在分化条件下长期培养(长达60 d)的EB中仍有表达各项多能性指标的细胞集落.有关这一现象的进一步分析工作正在进行中.     

Generation of a multi-layer muscle fiber sheet from mouse ES cells by the spermine action at specific timing and concentration

Here, we show that spermine can induce the generation of a multi-layer muscle fiber sheet (MMFS) in mouse embryonic stem (ES) cells. ES cells were cultured by the hanging drop method and embryoid bodies (EBs) that formed after 2 days of culture were transferred to a 24-well dish (1 EB/well) containing differentiation medium. EBs cultured in the absence of spermine showed no evidence of differentiation of contractile muscle fibers. In contrast, the addition of spermine (0.5-1.0 mM) for 24 hr on day 12 of culture was found to result in the formation of contractile muscle fibers around the EBs by day 17, with further differentiation into MMFS by day 32. We found that spermine could only induce muscle cell differentiation in EBs during a limited period of culture. Moreover, high concentrations of spermine inhibited muscle fiber generation. Histochemical analysis showed that the MMFS induced by spermine had a heterogeneous architecture. Heart muscle cells appeared to be predominant in some regions, as evidenced by the expression of the markers atrial natriuretic peptide (ANP) and connexin 40 (Cx40), while skeletal muscle appeared to predominate in other regions, as indicated by the expression of MyoD. DNA array analysis showed specific enhancement of expression of muscle cell genes, supporting our conclusion that spermine induces differentiation of muscle cells in vitro.     

Rat bone marrow derived mesenchymal progenitor cells support mouse ES cell growth and germ-like cell differentiation

Mouse embryonic fibroblasts (MEFs) have been used as feeder cells to support the growth of mouse embryonic stem cell (mESC) and primordial germ cells (PGC) in culture for many years. However, MEF preparation is a complex and tedious task. Recently, there are reports indicating that the microenvironment provided by bone marrow stromal cells could support the survival of embryonic-like stem cells in bone marrow. In this report, rat bone marrow derived mesenchymal progenitor cells (MPC) were used as feeder cells to culture mouse Oct4-GFP ES cell and ES cell derived germ cells. FACS results show that similar to MEF, rat MPC could efficiently support growth of the mouse Oct4-GFP ES cell line in culture (MPC 85.5 ± 5.1% vs MEF 84.1 ± 6.2%). ES cells could be subcultured for >15 passages without losing morphological characteristics. The cultured cells expressed stem cell marker alkaline phosphatase, Oct4, Sox2, and SSEA-1. Furthermore, rat MPC cells were able to support survival of germ cells isolated from mouse Oct4-GFP ES cell formed embryoid bodies (EB). After induction by retinoic acid for 7 days, some isolated cells differentiated to spermatogonial stem-like cells, expressing Mvh, Stra-8, Hsp90-α, integrinβ1 and α6. Compared with traditional MEF culture systems, the rat MPC culture system is effective in supporting ES cell growth and is easy to prepare.     

Modified Mouse Embryonic Stem Cell based Assay for Quantifying Cardiogenic Induction Efficiency

Differentiation of pluripotent stem cells is tightly controlled by temporal and spatial regulation of multiple key signaling pathways. One of the hurdles to its understanding has been the varied methods in correlating changes of key signaling events to differentiation efficiency. We describe here the use of a mouse embryonic stem (ES) cell based assay to identify critical time windows for Wnt/β-catenin and BMP signal activation during cardiogenic induction. By scoring for contracting embryonic bodies (EBs) in a 96-well plate format, we can quickly quantify cardiogenic efficiency and identify crucial time windows for Wnt/β-catenin and BMP signal activation in a time course following specific modulator treatments. The principal outlined here is not limited to cardiac induction alone, and can be applied towards the study of many other cell lineages. In addition, the 96-well format has the potential to be further developed as a high throughput, automated assay to allow for the testing of more sophisticated experimental hypotheses.     

Novel method of forming human embryoid bodies in a polystyrene dish surface-coated with a temperature-responsive methylcellulose hydrogel

A temperature-responsive hydrogel composed of aqueous methylcellulose (MC) blended with distinct concentrations of PBS was prepared and characterized. The developed MC hydrogel underwent a sol-gel reversible transition upon heating or cooling at approximately 32 degrees C. This temperature-responsive hydrogel was employed to coat the surface of a polystyrene dish and used to cultivate human embryonic stem (hES) cell clumps for the formation of embryoid bodies (EBs) in liquid suspension culture (LSC-MC/PS). The conventional hanging drop culture (HDC) and LSC in the uncoated polystyrene dish (LSC-PS) or in the Corning Ultralow-Attachment plate (LSC-ULAP) were used as controls. The results indicated that LSC-PS failed to generate EBs in an efficient manner, whereas the efficiencies of EB formation observed in LSC-ULAP and LSC-MC/PS were significantly greater than in HDC. The hES cells within the EBs were shown to express molecular markers specific for representative cells from the three embryonic germ layers. These results indicated that the MC-coated dish can be used to produce a large scale of hES cell derivatives through the formation of EBs.     

Controlled embryoid body formation via surface modification and avidin–biotin cross-linking

Cell–cell interaction is an integral part of embryoid body (EB) formation controlling 3D aggregation. Manipulation of embryonic stem (ES) cell interactions could provide control over EB formation. Studies have shown a direct relationship between EB formation and ES cell differentiation. We have previously described a cell surface modification and cross-linking method for influencing cell–cell interaction and formation of multicellular constructs. Here we show further characterisation of this engineered aggregation. We demonstrate that engineering accelerates ES cell aggregation, forming larger, denser and more stable EBs than control samples, with no significant decrease in constituent ES cell viability. However, extended culture ≥5 days reveals significant core necrosis creating a layered EB structure. Accelerated aggregation through engineering circumvents this problem as EB formation time is reduced. We conclude that the proposed engineering method influences initial ES cell-ES cell interactions and EB formation. This methodology could be employed to further our understanding of intrinsic EB properties and their effect on ES cell differentiation.     

Production of Mouse Embryoid Bodies with Hepatic Differentiation Potential by Stirred Tank Bioreactor

Embryonic stem (ES) cells can differentiate into functional hepatic lineage cells, which can potentially be used in biomedicine. To obtain hepatic lineage cells from ES cells, embryoid bodies (EBs) must be formed. In this study, we developed an EB formation system using a spinner flask for mass production of EBs. ES cells were inoculated into the spinner flask, where they formed EBs within 4 d. The EBs were then transferred into an attached culture for hepatic differentiation. To verify the hepatic lineage cells, albumin secretion and hepatic-specific gene expression were examined. We found that EBs formed by either the spinner flask or hanging drops exhibited similar albumin secretion potential and hepatic-specific gene expression. We conclude that the spinner flask method can be used to produce mouse EBs that can be used to mass produce hepatic lineage cells for use in biomedicine.     

Production of mouse embryoid bodies with hepatic differentiation potential by stirred tank bioreactor

Embryonic stem (ES) cells can differentiate into functional hepatic lineage cells, which can potentially be used in biomedicine. To obtain hepatic lineage cells from ES cells, embryoid bodies (EBs) must be formed. In this study, we developed an EB formation system using a spinner flask for mass production of EBs. ES cells were inoculated into the spinner flask, where they formed EBs within 4 d. The EBs were then transferred into an attached culture for hepatic differentiation. To verify the hepatic lineage cells, albumin secretion and hepatic-specific gene expression were examined. We found that EBs formed by either the spinner flask or hanging drops exhibited similar albumin secretion potential and hepatic-specific gene expression. We conclude that the spinner flask method can be used to produce mouse EBs that can be used to mass produce hepatic lineage cells for use in biomedicine.     

Embryoid bodies formation and differentiation from mouse embryonic stem cells in collagen/Matrigel scaffolds

Embryonic stem (ES) cells have the potential to develop into any type of tissue and are considered as a promising source of seeding cells for tissue engineering and transplantation therapy. The main catalyst for ES cells differentiation is the growth into embryoid bodies (EBs), which are utilized widely as the trigger of in vitro differentiation. In this study, a novel method for generating EBs from mouse ES cells through culture in collagen/Matrigel scaffolds was successfully established. When single ES cells were seeded in three dimensional collagen/Matrigel scaffolds, they grew into aggregates gradually and formed simple EBs with circular structures. After 7 days' culture,they formed into cystic EBs that would eventually differentiate into the three embryonic germ layers. Evaluation of the EBs in terms of morphology and potential to differentiate indicated that they were typical in structure and could generate various cell types; they were also able to form into tissue-like structures. Moreover, with introduction of ascorbic acid, ES cells differentiated into cardiomyocytes efficiently and started contracting synchronously at day 19. The results demonstrated that collagen/Matrigel scaffolds supported EBs formarion and their subsequent differentiation in a single three dimensional environment.     

A simple technique for quantifying apoptosis in 96-well plates

Background  

Analyzing apoptosis has been an integral component of many biological studies. However, currently available methods for quantifying apoptosis have various limitations including multiple, sometimes cell-damaging steps, the inability to quantify live, necrotic and apoptotic cells at the same time, and non-specific detection (i.e. "false positive"). To overcome the shortcomings of current methods that quantify apoptosis in vitro and to take advantage of the 96-well plate format, we present here a modified ethidium bromide and acridine orange (EB/AO) staining assay, which may be performed entirely in a 96-well plate. Our method combines the advantages of the 96-well format and the conventional EB/AO method for apoptotic quantification.     

Differential expression of glucose transporter isoforms during embryonic stem cell differentiation

In mouse blastocysts six facilitative glucose transporter isoforms (GLUT)1-4, 8 and 9 are expressed. We have used the mouse embryonic stem (ES) cell line D3 and spontaneously differentiating embryoid bodies (EB) to investigate GLUT expression and the influence of glucose during differentiation of early embryonic cells. Both ES cells and EBs (2d-20d) expressed GLUT1, 3, and 8, whereas the isoforms 2 and 4 were detectable exclusively in EBs. Differentiation-associated expression of GLUT was analyzed by double staining with stage-specific embryonic antigen (SSEA-1), cytokeratins (CK18, 19), nestin, and desmin. Similar to trophoblast cells in mouse blastocysts the outer cell layer of endoderm-like cells showed a high GLUT3 expression in early EBs. In 20-day-old EBs no GLUT3 protein and only minor GLUT3 mRNA amounts could be detected. A minimal glucose concentration of 5 mM applied during 2 and 8 days of EB culture resulted in up-regulated GLUT4, Oct-4 and SSEA-1 levels and a delay in EB differentiation. We conclude that GLUT expression depends on cellular differentiation and that the expression is modulated by glucose concentration. The developmental and glucose-dependent regulation of GLUT strongly suggests a functional role of glucose and glucose transporters in ES cell differentiation and embryonic development.     

Enhanced cardiac differentiation of mouse embryonic stem cells by use of the slow-turning,lateral vessel (STLV) bioreactor

Embryoid body (EB) formation is a common intermediate during in vitro differentiation of pluripotent stem cells into specialized cell types. We have optimized the slow-turning, lateral vessel (STLV) for large scale and homogenous EB production from mouse embryonic stem cells. The effects of inoculating different cell numbers, time of EB adherence to gelatin-coated dishes, and rotation speed for optimal EB formation and cardiac differentiation were investigated. Using 3 × 10⁵ cells/ml, 10 rpm rotary speed and plating of EBs onto gelatin-coated surfaces three days after culture, were the best parameters for optimal size and EB quality on consequent cardiac differentiation. These optimized parameters enrich cardiac differentiation in ES cells when using the STLV method.     

Characterization of developmental pathway of natural killer cells from embryonic stem cells in vitro

In vitro differentiation of embryonic stem (ES) cells is often used to study hematopoiesis. However, the differentiation pathway of lymphocytes, in particular natural killer (NK) cells, from ES cells is still unclear. Here, we used a multi-step in vitro ES cell differentiation system to study lymphocyte development from ES cells, and to characterize NK developmental intermediates. We generated embryoid bodies (EBs) from ES cells, isolated CD34(+) EB cells and cultured them on OP9 stroma with a cocktail of cytokines to generate cells we termed ES-derived hematopoietic progenitors (ES-HPs). EB cell subsets, as well as ES-HPs derived from EBs, were tested for NK, T, B and myeloid lineage potentials using lineage specific cultures. ES-HPs derived from CD34(+) EBs differentiated into NK cells when cultured on OP9 stroma with IL-2 and IL-15, and into T cells on Delta-like 1-transduced OP9 (OP9-DL1) with IL-7 and Flt3-L. Among CD34(+) EB cells, NK and T cell potentials were detected in a CD45(-) subset, whereas CD45(+) EB cells had myeloid but not lymphoid potentials. Limiting dilution analysis of ES-HPs generated from CD34(+)CD45(-) EB cells showed that CD45(+)Mac-1(-)Ter119(-) ES-HPs are highly enriched for NK progenitors, but they also have T, B and myeloid potentials. We concluded that CD45(-)CD34(+) EB cells have lymphoid potential, and they differentiate into more mature CD45(+)Lin(-) hematopoietic progenitors that have lymphoid and myeloid potential. NK progenitors among ES-HPs are CD122(-) and they rapidly acquire CD122 as they differentiate along the NK lineage.     

Using 96-well tissue culture polystyrene plates and a fluorescence plate reader as tools to study the survival and inactivation of viruses on surfaces

A method for studying the behavior of viruses on surfaces has been developed and is illustrated by determining the temperatures that inactivate adsorbed viral hemorrhagic septicemia virus (VHSV) and the concentration of 1-propanol that disinfected surfaces with adsorbed VHSV and chum salmon virus (CSV). VHSV is a rhabdovirus; CSV, a reovirus, and they were detected with two fish cell lines, EPC and CHSE-214, respectively. When polystyrene tissue culture surfaces were incubated with virus, rinsed, and left to dry, they still supported the attachment and spreading of cell lines and after 7 days these cells showed the characteristic CPE of the viruses. Thus cells appeared to be infected directly from surfaces on which viruses had been adsorbed. Applying this property to 96-well plates allowed duplicate surfaces to be examined for their infectiousness or support of CPE. For each treatment 80 replicate surfaces in a 96-well plate were tested at one time and the results expressed as the number of wells showing CPE. VHSV adsorbed to polystyrene was inactivated by drying in the dark at temperatures above 14 °C, but remained infectious for at least 15 days of drying at 4 °C. For chemical sterilization of polystyrene surfaces with adsorbed virus, disinfection was achieved with 1-propanol at 40% for VHSV and at 60% for CSV. As CPE can be conveniently monitored in 96-well plates with a fluorescence plate reader, this method can be used to rapidly evaluate a variety of treatments for their ability to inactivate surface-bound viruses.     

Scalable producing embryoid bodies by rotary cell culture system and constructing engineered cardiac tissue with ES-derived cardiomyocytes in vitro

Embryonic stem (ES) cells are of significant interest either as an in vitro model recapitulating early embryonic development or as a renewable source of therapeutically useful cells. ES cells aggregation is important for embryoid bodies (EBs) formation and the subsequent generation of ES cell derivatives. This study was conducted to describe scalable production of EBs by the rotary cell culture system (RCCS, STLV type) and estimate the feasibility of constructing engineered cardiac tissue (ECT). In comparison with suspension culture in a Petri dish, the efficiency of the dynamic process was analyzed with respect to the yield of EB formation and their cardiomyocyte differentiation. Cardiomyocyte differentiation was evaluated by immunohistochemical analysis. After the elementary enrichment by gradient percoll, ES cell-derived cardiomyocytes were applied to construct ECT. Cell gross morphology, spatial distribution, and ultrastructure were evaluated by using histological analysis, confocal laser scanning microscopy, and transmission electron microscopy. Results showed that EB efficiencies in STLV were nearly 1.5-2.0 times higher than that of liquid suspension cultures, and cardiomyocyte differentiation of EBs progressed in a normal course after the dynamic cultivation in STLV. Additionally, the differentiated cultures could be enriched elementarily by gradient percoll. Once cast into the collagen strand, cells grew well and became more matured in Petri dishes. Synchronous contraction of the cell cluster was observed on the surface of the ECT, and cell connection was also established. It was the first report to have beating ES-derived cardiomyocytes on a 3-D collagen scaffold, which might provide a promising model for physiological and pharmacological studies and tissue replacement therapy.     

Chondrocytes derived from mouse embryonic stem cells

Our knowledge of cellular differentiation processes during chondro- and osteogenesis, in particular the complex interaction of differentiation factors, is still limited. We used the model system of embryonic stem (ES) cell differentiation in vitro via cellular aggregates, so called embryoid bodies (EBs), to analyze chondrogenic and osteogenic differentiation. ES cells differentiated into chondrocytes and osteocytes throughout a series of developmental stages resembling cellular differentiation events during skeletal development in vivo. A lineage from pluripotent ES cells via mesenchymal, prechondrogenic cells, chondrocytes and hypertrophicchondrocytes up to osteogenic cells was characterized. Furthermore, we found evidence for another osteogenic lineage, bypassing the chondrogenic stage. Together our results suggest that this in vitro system will be helpful to answer so far unacknowledged questions regarding chondrogenic and osteogenic differentiation. For example, we isolated an as yet unknown cDNA fragment from ES cell-derived chondrocytes, which showed a developmentally regulated expression pattern during EB differentiation. Considering ES cell differentiation as an alternative approach for cellular therapy, we used two different methods to obtain pure chondrocyte cultures from the heterogenous EBs. First, members of the transforming growth factor (TGF)-β family were applied and found to modulate chondrogenic differentiation but were not effective enough to produce sufficient amounts of chondrocytes. Second, chondrocytes were isolated from EBs by micro-manipulation. These cells initially showed dedifferentiation into fiboblastoid cells in culture, but later redifferentiated into mature chondrocytes. However, a small amount of chondrocytes isolated from EBs transdifferentiated into other mesenchymal cell types, indicating that chondrocytes derived from ES cells posses a distinct differentiation plasticity. This revised version was published online in July 2006 with corrections to the Cover Date.