Rate of treadmilling of actin filaments in vitro

Actin filaments capped at the barbed ends were formed by polymerizing monomeric actin onto a gelsolin-actin complex. The rate of depolymerization and polymerization of the pointed ends was determined by diluting gelsolin-capped actin filaments into various concentrations of monomeric actin. Under the conditions of the experiments (100 mM-KCl, 2 mM-MgCl2 at 37 degrees C) the rate constant of dissociation of subunits both from a shortening and a lengthening filament was found to be 0.21 s-1. As the rate of dissociation of subunits from the slow pointed end determines the rate of treadmilling, it is concluded that actin filaments treadmill with a rate of about 2 micron/h.     

Protein localization by actin treadmilling and molecular motors regulates stereocilia shape and treadmilling rate

We present a physical model that describes the active localization of actin-regulating proteins inside stereocilia during steady-state conditions. The mechanism of localization is through the interplay of free diffusion and directed motion, which is driven by coupling to the treadmilling actin filaments and to myosin motors that move along the actin filaments. The resulting localization of both the molecular motors and their cargo is calculated, and is found to have an exponential (or steeper) profile. This localization can be at the base (driven by actin retrograde flow and minus-end myosin motors), or at the stereocilia tip (driven by plus-end myosin motors). The localization of proteins that influence the actin depolymerization and polymerization rates allow us to describe the narrow shape of the stereocilia base, and the observed increase of the actin polymerization rate with the stereocilia height.     

Axonal transport of tubulin and actin

Brain Cell Biology - Axonal transport is responsible for supplying the axonal processes with proteins that are synthesized in the cell body. Among the proteins that are moved by this mechanism are...     

Direct determination of actin polarity in the cell

Actin filaments are polar structures that exhibit a fast growing plus end and a slow growing minus end. According to their organization in cells, in parallel or antiparallel arrays, they can serve, respectively, in protrusions or in contractions. The determination of actin filament polarity in subcellular compartments is therefore required to establish their local function. Myosin binding has previously been the sole method of polarity determination. Here, we report the first direct determination of actin filament polarity in the cell without myosin binding. Negatively stained cytoskeletons of lamellipodia were analyzed by adapting electron tomography and a single particle analysis for filamentous complexes. The results of the stained cytoskeletons confirmed that all actin filament ends facing the cell membrane were the barbed ends. In general, this approach should be applicable to the analysis of actin polarity in tomograms of the actin cytoskeleton.     

Cell polarity and actin mRNA localization

In many species, intracellular mRNA localization is linked to cell polarity. In many cases however, mRNAs become localized as a result of a pre-existing cell-polarity, and they do not modify it. Remarkably, in the case beta actin mRNA in vertebrate, it has been shown that the transport and localization of this RNA is required for the establishment and maintenance of cell polarity. This occurs in fibroblasts, but, very interestingly, in immature neurons as well. This review will describe the functions and mechanisms of actin mRNA localization.     

Planar polarity and actin dynamics in the epidermis of Drosophila

Dorsal closure is a morphogenetic process involving the coordinated convergence of two epithelial sheets to enclose the Drosophila melanogaster embryo. Specialized populations of cells at the edges of each epithelial sheet, the dorsal-most epidermal cells, emit actin-based processes that are essential for the proper enclosure of the embryo. Here we show that actin dynamics at the leading edge is preceded by a planar polarization of the dorsal-most epidermal cells associated with a reorganization of the cytoskeleton. An important consequence of this planar polarization is the formation of actin-nucleating centres at the leading edge, which are important in the dynamics of actin. We show that Wingless (Wg) signalling and Jun amino-terminal kinase (JNK) signalling have overlapping but different roles in these events.     

Role of nucleotide hydrolysis in the polymerization of actin and tubulin

Here is presented a short survey of the main aspects of the involvement of nucleotide hydrolysis in the polymerization of actin and microtubules: 1) XTP hydrolysis is not tightly coupled to the polymerization process; XTP hydrolysis and phosphate release generate an unstable XDP-polymer which is maintained at steady state, in the presence of XTP, by terminal XTP-subunits; this feature can generate patterns of phase transitions of the polymer between stable and unstable conformations; 2) Interactions between subunits are involved in the mechanism of XTP hydrolysis; 3) XTP cleavage on the polymer is followed by the slow release of P_i; the structural and thermodynamic characteristics of the transient XDP-P_i-polymer may play a crucial role in the regulation of the dynamics of microtubules and actin filaments.     

The visualization of actin filament polarity in thin sections. Evidence for the uniform polarity of membrane-associated filaments

We have developed an improved method for visualizing actin filament polarity in thin sections. Myosin subfragment-1 (S-1)-decorated actin filaments display a dramatically enhanced arrowhead configuration when fixed in a medium which contains 0.2 % tannic acid. With the exception of brush borders from intestinal epithelial cells, the arrowhead periodicity of decorated filaments in a variety of nonmuscle cells is similar to that in isolated myofibrils. The periodicity of decorated filaments in brush borders is significantly smaller. Actin filaments which attach to membranes display a clear, uniform polarity, with the S-1 arrowheads pointing away from the plasma membrane, while those which comprise the stress fibers of myoblasts and CHO cells have antiparallel polarities. These observations are consistent with a sliding filament mechanism of cell motility.     

Arp2/3 complex and actin depolymerizing factor/cofilin in dendritic organization and treadmilling of actin filament array in lamellipodia.

The leading edge (approximately 1 microgram) of lamellipodia in Xenopus laevis keratocytes and fibroblasts was shown to have an extensively branched organization of actin filaments, which we term the dendritic brush. Pointed ends of individual filaments were located at Y-junctions, where the Arp2/3 complex was also localized, suggesting a role of the Arp2/3 complex in branch formation. Differential depolymerization experiments suggested that the Arp2/3 complex also provided protection of pointed ends from depolymerization. Actin depolymerizing factor (ADF)/cofilin was excluded from the distal 0.4 micrometer++ of the lamellipodial network of keratocytes and in fibroblasts it was located within the depolymerization-resistant zone. These results suggest that ADF/cofilin, per se, is not sufficient for actin brush depolymerization and a regulatory step is required. Our evidence supports a dendritic nucleation model (Mullins, R.D., J.A. Heuser, and T.D. Pollard. 1998. Proc. Natl. Acad. Sci. USA. 95:6181-6186) for lamellipodial protrusion, which involves treadmilling of a branched actin array instead of treadmilling of individual filaments. In this model, Arp2/3 complex and ADF/cofilin have antagonistic activities. Arp2/3 complex is responsible for integration of nascent actin filaments into the actin network at the cell front and stabilizing pointed ends from depolymerization, while ADF/cofilin promotes filament disassembly at the rear of the brush, presumably by pointed end depolymerization after dissociation of the Arp2/3 complex.     

Correlation between structural polarity and polar assembly of brain tubulin

The structural polarity of tubulin protofilaments is shown by image processing of tubulin hoops. There is a strict relationship between the shapes of protofilaments and their direction of growth.     

Dense bodies and actin polarity in vertebrate smooth muscle

The arrangement of cytoplasmic dense bodies in vertebrate smooth muscle and their relationship to the thin filaments was studied in cells from rabbit vas deferens and portal vein which were made hyperpermeable (skinned) with saponin and incubated with myosin subfragment 1 (S-1). The dense bodies were obliquely oriented, elongated structures sometimes appearing as chains up to 1.5 microns in length; they were often continuous across the cell for 200 to 300 nm and were interconnected by an oblique network of 10-nm filaments. The arrowheads, formed by S-1 decoration of actins, which inserted into both the sides and ends of dense bodies, always pointed away from the dense body, similar to the polarity of the thin filaments at the Z- bands of skeletal muscle. These results show that the cytoplasmic dense bodies function as anchoring sites for the thin filaments and indicate that the thin filaments, thick filaments, and dense bodies constitute a contractile unit.     

Immunocytochemical localization of actin and tubulin in rat testis and spermatozoa

Summary Using commercial monoclonal antibodies against actin and tubulin ( and ), the respective antigens were localized on semithin and ultrathin sections of the rat testis. Tubulin immunofluorescence was found in the socalled manchette surrounding the heads of the maturating spermatids as well as the sperm tail. The distribution pattern varied with sperm development. Modified Sertoli cells found at the transition between the seminiferous tubules and the rete testis displayed much filamentous tubulin-reactive material. The immunofluorescence findings could be confirmed at the ultrastructural level using the indirect immunogold method. Actin immunofluorescence was demonstrated in vascular smooth muscle cells, interstitial macrophages and — most intensely — in peritubular cells. Inside the seminiferous tubules the Sertoli cell junctions and the ectoplasmic specializations of the Sertoli cells that follow the outer contour of spermatid heads displayed distinct actin immunofluorescence. In addition to the locations mentioned, actin-like immunoreactivity was visualized at the ultrastructural level in the chromatoid body and the subacrosomal space of spermatids as well as on the outer dense fibers of the sperm tail.Immunoblotting experiments with actin antibodies showed that in extracts from testicular spermatozoa, intact or fragmented into heads and tails, from isolated Sertoli cells grown in vitro, and from testis tissue in addition to authentic actin a protein was present in sperm tail extracts that strongly bound the actin antibody. This protein may be an actin-related protein and may be responsible for the actin-like immunoreactivity of the outer dense fibers of the sperm tail.     

Subtilisin cleavage of tubulin heterodimers and polymers.

Native pig brain tubulin in heterodimer or polymer form was subjected to limited proteolysis by subtilisin, which is known to cleave at accessible sites within the last 50 amino acids of the highly variable carboxyl-termini of the alpha and beta subunits. Heterodimeric tubulin or tubulin polymerized in the presence of 4 M glycerol or taxol was used in these experiments. Digested tubulin was purified by cycles of polymerization and depolymerization, ammonium sulfate precipitation, or ion-exchange chromatography in the absence or presence of nonionic detergent; however, smaller cleaved products of about 34,000 to 40,000 MW remained associated with the major cleaved subunits, alpha' and beta', under all purification conditions. In order to determine the effect of subtilisin cleavage on tubulin heterogeneity, purified native or subtilisin-cleaved tubulin was subjected to isoelectric focusing, followed by SDS-PAGE. The total number of isotypes was reduced from 17-22 for native alpha,beta tubulin to 7-9 for subtilisin-cleaved alpha',beta' tubulin. When tubulin heterodimers were cleaved, a single major beta' isotype was evident; however, when tubulin polymerized in 4 M glycerol was cleaved, two major beta' isotypes were found. Monoclonal antibodies that recognize a beta carboxyl-terminal peptide, residues 410-430, reacted with both major beta' isotypes, indicating that subtilisin cleavage occurred within the last 20 of the 450 amino acids. In order to establish whether this difference was in fact associated with polymer or heterodimer forms of tubulin, digestion was carried out in the presence of taxol, which stabilizes tubulin polymers. A single major beta' isotype different from the cleaved heterodimer, but coincident with one of the bands of the cleaved glycerol-induced polymers, was found when taxol-treated tubulin was digested. This result suggests the presence of more than one subtilisin site in the beta subunit, near residues 430-435, with different accessibility to the enzyme in the heterodimer and polymer form.     

Immunocytochemical localization of actin and tubulin in rat testis and spermatozoa

Using commercial monoclonal antibodies against actin and tubulin (alpha and beta), the respective antigens were localized on semithin and ultrathin sections of the rat testis. Tubulin immunofluorescence was found in the socalled manchette surrounding the heads of the maturating spermatids as well as the sperm tail. The distribution pattern varied with sperm development. Modified Sertoli cells found at the transition between the seminiferous tubules and the rete testis displayed much filamentous tubulin-reactive material. The immunofluorescence findings could be confirmed at the ultrastructural level using the indirect immunogold method. Actin immunofluorescence was demonstrated in vascular smooth muscle cells, interstitial macrophages and - most intensely - in peritubular cells. Inside the seminiferous tubules the Sertoli cell junctions and the ectoplasmic specializations of the Sertoli cells that follow the outer contour of spermatid heads displayed distinct actin immunofluorescence. In addition to the locations mentioned, actin-like immunoreactivity was visualized at the ultrastructural level in the chromatoid body and the subacrosomal space of spermatids as well as on the outer dense fibers of the sperm tail. Immunoblotting experiments with actin antibodies showed that in extracts from testicular spermatozoa, intact or fragmented into heads and tails, from isolated Sertoli cells grown in vitro, and from testis tissue in addition to authentic actin a protein was present in sperm tail extracts that strongly bound the actin antibody. This protein may be an actin-related protein and may be responsible for the actin-like immunoreactivity of the outer dense fibers of the sperm tail.