Characterization of a maltose transport system in Clostridium acetobutylicum ATCC 824

The utilization of maltose by Clostridium acetobutylicum ATCC 824 was investigated. Glucose was used preferentially to maltose, when both substrates were present in the medium. Maltose phosphoenolpyruvate (PEP)-dependent phosphotransferase system (PTS) activity was detected in extracts prepared from cultures grown on maltose, but not glucose or sucrose, as the sole carbon source. Extract fractionation and PTS reconstitution experiments revealed that the specificity for maltose is contained entirely within the membrane in this organism. A putative gene system for the maltose PTS was identified (from the C. acetobutylicum ATCC 824 genome sequence), encoding an enzyme II^Mal and a maltose 6-phosphate hydrolase. Journal of Industrial Microbiology & Biotechnology (2001) 27, 298–306. Received 12 September 2000/ Accepted in revised form 30 November 2000     

Characterization and Development of Two Reporter Gene Systems for Clostridium acetobutylicum

The use of lacZ from Thermoanaerobacterium thermosulfurigenes (encoding β-galactosidase) and lucB from Photinus pyralis (encoding luciferase) as reporter genes in Clostridium acetobutylicum was analyzed with promoters of genes required for solventogenesis and acidogenesis. Both systems proved to be well suited and allowed the detection of differences in promoter strength at least up to 100-fold. The luciferase assay could be performed much faster and comes close to online measurement. Resequencing of lacZ revealed a sequence error in the original database entry, which resulted in β-galactosidase with an additional 31 amino acids. Cutting off part of the gene encoding this C terminus resulted in decreased enzyme activity. The lacZ reporter data showed that bdhA (encoding butanol dehydrogenase A) is expressed during the early growth phase, followed by sol (encoding butyraldehyde/butanol dehydrogenase E and coenzyme A transferase) and bdhB (encoding butanol dehydrogenase B) expression. adc (encoding acetoacetate decarboxylase) was also induced early. There is about a 100-fold difference in expression between adc and bdhB (higher) and bdhA and the sol operon (lower). The lucB reporter activity could be increased 10-fold by the addition of ATP to the assay. Washing of the cells proved to be important in order to prevent a red shift of bioluminescence in an acidic environment (for reliable data). lucB reporter measurements confirmed the expression pattern of the sol and ptb-buk (encoding phosphotransbutyrylase and butyrate kinase) operons as determined by the lacZ reporter and showed that the expression level from the ptb promoter is 59-fold higher than that from the sol operon promoter.     

Development of a Sensitive Gene Expression Reporter System and an Inducible Promoter-Repressor System for Clostridium acetobutylicum

A sensitive gene expression reporter system was developed for Clostridium acetobutylicum ATCC 824 by using a customized gusA expression cassette. In discontinuous cultures, time course profiles of β-glucuronidase specific activity reflected adequately in vivo dynamic up- and down-regulation of acidogenesis- and/or solventogenesis-associated promoter expression in C. acetobutylicum. Furthermore, a new inducible gene expression system was developed in C. acetobutylicum, based on the Staphylococcus xylosus xylose operon promoter-repressor regulatory system.     

Purification and Characterization of Two Endoxylanases from Clostridium acetobutylicum ATCC 824

Two endoxylanases produced by C. acetobutylicum ATCC 824 were purified to homogeneity by column chromatography. Xylanase A, which has a molecular weight of 65,000, hydrolyzed larchwood xylan randomly, yielding xylohexaose, xylopentaose, xylotetraose, xylotriose, and xylobiose as end products. Xylanase B, which has a molecular weight of 29,000, also hydrolyzed xylan randomly, giving xylotriose and xylobiose as end products. Xylanase A hydrolyzed carboxymethyl cellulose with a higher specific activity than xylan. It also exhibited high activity on acid-swollen cellulose. Xylanase B showed practically no activity against either cellulose or carboxymethyl cellulose but was able to hydrolyze lichenan with a specific activity similar to that for xylan. Both xylanases had no aryl-β-xylosidase activity. The smallest oligosaccharides degraded by xylanases A and B were xylohexaose and xylotetraose, respectively. The two xylanases demonstrated similar K_m and V_max values but had different pH optima and isoelectric points. Ouchterlony immunodiffusion tests showed that xylanases A and B lacked antigenic similarity.     

Autolysis of Clostridium acetobutylicum ATCC 824.

The optimum conditions for autolysis of Clostridium acetobutylicum ATCC 824 were determined. Autolysis was optimal at pH 6.3 and 55 degrees C in 0.1 M-sodium acetate/phosphate buffer. The ability of cells to autolyse decreased sharply at the end of the exponential phase of growth. Lysis was stimulated by monovalent cations and compounds that complex divalent cations, and inhibited by divalent cations. The autolysin of C. acetobutylicum, which was mainly cytoplasmic, was purified to homogeneity and characterized as a muramidase. The enzyme was identical to the extracellular muramidase in terms of M(r), isoelectric point and NH2-terminal amino acid sequence. The autolysin was inhibited by lipoteichoic acids and cardiolipin but not by phosphatidylethanolamine and phosphatidylglycerol. A mechanism of regulation and fixation involving lipoteichoic acid, cardiolipin and divalent cations is proposed.     

Expression of a Cloned Cyclopropane Fatty Acid Synthase Gene Reduces Solvent Formation in Clostridium acetobutylicum ATCC 824

The cyclopropane fatty acid synthase gene (cfa) of Clostridium acetobutylicum ATCC 824 was cloned and overexpressed under the control of the clostridial ptb promoter. The function of the cfa gene was confirmed by complementation of an Escherichia coli cfa-deficient strain in terms of fatty acid composition and growth rate under solvent stress. Constructs expressing cfa were introduced into C. acetobutylicum hosts and cultured in rich glucose broth in static flasks without pH control. Overexpression of the cfa gene in the wild type and in a butyrate kinase-deficient strain increased the cyclopropane fatty acid content of early-log-phase cells as well as initial acid and butanol resistance. However, solvent production in the cfa-overexpressing strain was considerably decreased, while acetate and butyrate levels remained high. The findings suggest that overexpression of cfa results in changes in membrane properties that dampen the full induction of solventogenesis. The overexpression of a marR homologous gene preceding the cfa gene in the clostridial genome resulted in reduced cyclopropane fatty acid accumulation.     

Metabolic engineering of Clostridium acetobutylicum ATCC 824 for isopropanol-butanol-ethanol fermentation

Clostridium acetobutylicum naturally produces acetone as well as butanol and ethanol. Since acetone cannot be used as a biofuel, its production needs to be minimized or suppressed by cell or bioreactor engineering. Thus, there have been attempts to disrupt or inactivate the acetone formation pathway. Here we present another approach, namely, converting acetone to isopropanol by metabolic engineering. Since isopropanol can be used as a fuel additive, the mixture of isopropanol, butanol, and ethanol (IBE) produced by engineered C. acetobutylicum can be directly used as a biofuel. IBE production is achieved by the expression of a primary/secondary alcohol dehydrogenase gene from Clostridium beijerinckii NRRL B-593 (i.e., adh(B-593)) in C. acetobutylicum ATCC 824. To increase the total alcohol titer, a synthetic acetone operon (act operon; adc-ctfA-ctfB) was constructed and expressed to increase the flux toward isopropanol formation. When this engineering strategy was applied to the PJC4BK strain lacking in the buk gene (encoding butyrate kinase), a significantly higher titer and yield of IBE could be achieved. The resulting PJC4BK(pIPA3-Cm2) strain produced 20.4 g/liter of total alcohol. Fermentation could be prolonged by in situ removal of solvents by gas stripping, and 35.6 g/liter of the IBE mixture could be produced in 45 h.     

Development and characterization of a gene expression reporter system for Clostridium acetobutylicum ATCC 824.

A gene expression reporter system (pHT3) for Clostridium acetobutylicum ATCC 824 was developed by using the lacZ gene from Thermoanaerobacterium thermosulfurogenes EM1 as the reporter gene. In order to test the reporter system, promoters of three key metabolic pathway genes, ptb (coding for phosphotransbutyrylase), thl (coding for thiolase), and adc (coding for acetoacetate decarboxylase), were cloned upstream of the reporter gene in pHT3 in order to construct vectors pHT4, pHT5, and pHTA, respectively. Detection of beta-galactosidase activity in time course studies performed with strains ATCC 824(pHT4), ATCC 824(pHT5), and ATCC 824(pHTA) demonstrated that the reporter gene produced a functional beta-galactosidase in C. acetobutylicum. In addition, time course studies revealed differences in the beta-galactosidase specific activity profiles of strains ATCC 824(pHT4), ATCC 824(pHT5), and ATCC 824(pHTA), suggesting that the reporter system developed in this study is able to effectively distinguish between different promoters. The stability of the beta-galactosidase produced by the reporter gene was also examined with strains ATCC 824(pHT4) and ATCC 824(pHT5) by using chloramphenicol treatment to inhibit protein synthesis. The data indicated that the beta-galactosidase produced by the lacZ gene from T. thermosulfurogenes EM1 was stable in the exponential phase of growth. In pH-controlled fermentations of ATCC 824(pHT4), the kinetics of beta-galactosidase formation from the ptb promoter and phosphotransbutyrylase formation from its own autologous promoter were found to be similar.     

Characterization of thermostable Xyn10A enzyme from mesophilic Clostridium acetobutylicum ATCC 824

A thermostable xylanase gene, xyn10A (CAP0053), was cloned from Clostridium acetobutylicum ATCC 824. The nucleotide sequence of the C. acetobutylicum xyn10A gene encoded a 318-amino-acid, single-domain, family 10 xylanase, Xyn10A, with a molecular mass of 34 kDa. Xyn10A exhibited extremely high (92%) amino acid sequence identity with Xyn10B (CAP0116) of this strain and had 42% and 32% identity with the catalytic domains of Rhodothermus marinus xylanase I and Thermoascus aurantiacus xylanase I, respectively. Xyn10A enzyme was purified from recombinant Escherichia coli and was highly active toward oat-spelt and Birchwood xylan and slightly active toward carboxymethyl cellulose, arabinogalactouronic acid, and various p-nitrophenyl monosaccharides. Xyn10A hydrolyzed xylan and xylooligosaccharides larger than xylobiose to produce xylose. This enzyme was optimally active at 60°C and had an optimum pH of 5.0. This is one of a number of related activities encoded on the large plasmid in this strain.     

Cloning, Sequence, and Expression of the Phosphofructokinase Gene of Clostridium acetobutylicum ATCC 824 in Escherichia coli

The pfk gene encoding phosphofructokinase (Pfk) from the anaerobic bacterium Clostridium acetobutylicum ATCC 824 was cloned and sequenced. The gene was identified in a plasmid library by complementation of an E. coli pfk mutant and by the ability to amplify a fragment by PCR using primers based on homologous regions of Pfk from other microorganisms. Nucleotide sequence analysis revealed a coding region for a 319-aa protein homologous to Pfks from other organisms. Enzyme assay and ability to complement the growth defects of E. coli pfk mutants confirmed the expression of the clostridial pfk gene. The pyruvate kinase (pyk) gene was identified adjacent to pfk. Such an arrangement for the genes encoding key regulators of glycolytic flux had not yet been described in a strict anaerobe. This gene arrangement has been found in other Gram-positive organisms, but not in Gram-negative organisms. Reveived: 15 September 1997 / Accepted: 12 January 1998     

Isolation and Some Properties of a beta-d-Xylosidase from Clostridium acetobutylicum ATCC 824

A beta-d-xylosidase from C. acetobutylicum ATCC 824 was purified by column chromatography on CM-Sepharose, hydroxylapatite, Phenyl Sepharose, and Sephadex G-200. The enzyme had an apparent molecular weight of 224,000 as estimated by gel filtration. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis showed that the enzyme consisted of two subunits of 85,000 and one subunit of 63,000 daltons. It exhibited optimal activity at pH 6.0 to 6.5 and 45 degrees C. the enzyme had an isoelectric point of 5.85. It hydrolyzed p-nitrophenylxyloside readily with a K(m) of 3.7 mM. The enzyme hydrolyzed xylo-oligosaccharides with chain lengths of 2 to 6 units by cleaving a single xylose from the chain end. It showed little or no activity against xylan, carboxymethyl cellulose, and other p-nitrophenylglycosides.     

Production of heterologous and chimeric scaffoldins by Clostridium acetobutylicum ATCC 824

Clostridium acetobutylicum ATCC 824 converts sugars and various polysaccharides into acids and solvents. This bacterium, however, is unable to utilize cellulosic substrates, since it is able to secrete very small amounts of cellulosomes. To promote the utilization of crystalline cellulose, the strategy we chose aims at producing heterologous minicellulosomes, containing two different cellulases bound to a miniscaffoldin, in C. acetobutylicum. A first step toward this goal describes the production of miniCipC1, a truncated form of CipC from Clostridium cellulolyticum, and the hybrid scaffoldin Scaf 3, which bears an additional cohesin domain derived from CipA from Clostridium thermocellum. Both proteins were correctly matured and secreted in the medium, and their various domains were found to be functional.     

Host-plasmid interactions in recombinant strains of Clostridium acetobutylicum ATCC 824

Abstract Plasmid-containing strains of Clostridium acetobutylicum produced higher levels of solvents and lower levels of acids than wild-type cells in controlled pH 4.5 batch fermentations. This effect was observed regardless of whether or not the plasmids contained C. acetobutylicum genes. The effect was less prevalent in higher pH fermentations and apparently independent of the actual DNA sequences contained on these plasmids. The plasmid-containing strains were found to have lower growth-rates and higher solventogenic enzyme activities than wild-type cells. However, similar activity levels were found for both butyrate-pathway enzymes.     

Expression of Clostridium acetobutylicum ATCC 824 Genes in Escherichia coli for Acetone Production and Acetate Detoxification

A synthetic acetone operon (ace4) composed of four Clostridium acetobutylicum ATCC 824 genes (adc, ctfAB, and thl, coding for the acetoacetate decarboxylase, coenzyme A transferase, and thiolase, respectively) under the control of the thl promoter was constructed and was introduced into Escherichia coli on vector pACT. Acetone production demonstrated that ace4 is expressed in E. coli and resulted in the reduction of acetic acid levels in the fermentation broth. Since different E. coli strains vary significantly in their growth characteristics and acetate metabolism, ace4 was expressed in three E. coli strains: ER2275, ATCC 11303, and MC1060. Shake flask cultures of MC1060(pACT) produced ca. 2 mM acetone, while both strains ER2275(pACT) and ATCC 11303(pACT) produced ca. 40 mM acetone. Glucose-fed cultures of strain ATCC 11303(pACT) resulted in a 150% increase in acetone titers compared to those of batch shake flask cultures. External addition of sodium acetate to glucose-fed cultures of ATCC 11303(pACT) resulted in further increased acetone titers. In bioreactor studies, acidic conditions (pH 5.5 versus 6.5) improved acetone production. Despite the substantial acetone evaporation due to aeration and agitation in the bioreactor, 125 to 154 mM acetone accumulated in ATCC 11303(pACT) fermentations. These acetone titers are equal to or higher than those produced by wild-type C. acetobutylicum. This is the first study to demonstrate the ability to use clostridial genes in nonclostridial hosts for solvent production. In addition, acetone-producing E. coli strains may be useful hosts for recombinant protein production in that detrimental acetate accumulation can be avoided.     

Complementation of an Escherichia coli Polypeptide Deformylase Mutant with a Gene from Clostridium acetobutylicum ATCC 824

The Clostridium acetobutylicum ATCC 824 DNA containing the 3′ end of a PriA homolog, deformylase (def), and the 5′ end of formyltransferase (fmt) has been cloned, sequenced, and used to complement an Escherichia coli mutant. While def and fmt have been found sharing an operon in other organisms, the presence of a third gene within a putative operon has not previously been found. Received: 29 August 1997 / Accepted: 6 October 1997     

Phosphotransbutyrylase from Clostridium acetobutylicum ATCC 824 and its role in acidogenesis

Phosphotransbutyrylase (phosphate butyryltransferase [EC 2.3.1.19]) from Clostridium acetobutylicum ATCC 824 was purified approximately 200-fold to homogeneity with a yield of 13%. Steps used in the purification procedure were fractional precipitation with (NH4)2SO4, Phenyl Sepharose CL-4B chromatography, DEAE-Sephacel chromatography, high-pressure liquid chromatography with an anion-exchange column, and high-pressure liquid chromatography with a hydrophobic-interaction column. Gel filtration and denaturing gel electrophoresis data were consistent with a native enzyme having eight 31,000-molecular-weight subunits. Within the physiological range of pH 5.5 to 7, the enzyme was very sensitive to pH change in the butyryl phosphate-forming direction and showed virtually no activity below pH 6. This finding indicates that a change in internal pH may be one important factor in the regulation of the enzyme. The enzyme was less sensitive to pH change in the reverse direction. The enzyme could use a number of substrates in addition to butyryl coenzyme A (butyryl-CoA) but had the highest relative activity with butyryl-CoA, isovaleryl-CoA, and valeryl-CoA. The Km values at 30 degrees C and pH 8.0 for butyryl-CoA, phosphate, butyryl phosphate, and CoASH (reduced form of CoA) were 0.11, 14, 0.26, and 0.077 mM, respectively. Results of product inhibition studies were consistent with a random Bi Bi binding mechanism in which phosphate binds at more than one site.     

Arabinose is metabolized via a phosphoketolase pathway in Clostridium acetobutylicum ATCC 824

In this report, a novel zymogram assay and coupled phosphoketolase assay were employed to demonstrate that Clostridium acetobutylicum gene CAC1343 encodes a bi-functional xylulose-5-P/fructose-6-P phosphoketolase (XFP). The specific activity of purified recombinant XFP was 6.9?U/mg on xylulose-5-P and 21?U/mg on fructose-6-P, while the specific activity of XFP in concentrated C. acetobutylicum whole-cell extract was 0.094 and 0.52?U/mg, respectively. Analysis of crude cell extracts indicated that XFP activity was present in cells grown on arabinose but not glucose and quantitative PCR was used to show that CAC1343 mRNA expression was induced 185-fold during growth on arabinose when compared to growth on glucose. HPLC analysis of metabolites revealed that during growth on xylose and glucose more butyrate than acetate was formed with final acetate:butyrate ratios of 0.72 and 0.83, respectively. Growth on arabinose caused a metabolic shift to more oxidized products with a final acetate:butyrate ratio of 1.95. The shift towards more oxidized products is consistent with the presence of an XFP, suggesting that arabinose is metabolized via a phosphoketolase pathway while xylose is probably metabolized via the pentose phosphate pathway.     

Resonance assignments of cohesin and dockerin domains from Clostridium acetobutylicum ATCC824

Cohesin and dockerin domains are critical assembling components of cellulosome, a large extracellular multienzyme complex which is used by anaerobic cellulolytic bacteria to efficiently degrade lignocellulose. According to sequence homology, cohesins can be divided into three major groups, whereas cohesins from Clostridium acetobutylicum are beyond these groups and emanate from a branching point between the type I and type III cohesins. Cohesins and dockerins from C. acetobutylicum show low sequence homology to those from other cellulolytic bacteria, and their interactions are specific in corresponding species. Therefore the interactions between cohesins and dockerins from C. acetobutylicum are meaningful to the studies of both cellulosome assembling mechanism and the construction of designer cellulosome. Here we report the NMR resonance assignments of one cohesin from cellulosome scaffoldin cipA and one dockerin from a cellulosomal glycoside hydrolase (family 9) of C. acetobutylicum for further structural determination and functional studies.