Genetic mapping and QTL analysis of horticultural traits in cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.) using recombinant inbred lines

A set of 171 recombinant inbred lines (RIL) were developed from a narrow cross in cucumber (Cucumis sativus L.; 2n = 2x = 14) using the determinate (de), gynoecious (F), standard-sized leaf line G421 and the indeterminate, monoecious, little-leaf (ll) line H-19. A 131-point genetic map was constructed using these RILs and 216 F₂ individuals to include 14 SSRs, 24 SCARs, 27 AFLPs, 62 RAPDs, 1 SNP, and three economically important morphological [F (gynoecy), de (determinate habit), ll (little leaf)] markers. Seven linkage groups spanned 706 cM with a mean marker interval of 5.6 cM. The location of F and de was defined by genetic linkage and quantitative trait locus (QTL) analysis to be associated with SSR loci CSWCT28 and CSWCTT14 at 5.0 cM and 0.8 cM, respectively. RIL-based QTL analysis of the number of lateral branches in three environments revealed four location-independent factors that cumulatively explained 42% of the observed phenotypic variation. QTLs conditioning lateral branching (mlb1.1), fruit length/diameter ratio (ldr1.2) and sex expression (sex1.2) were associated with de. Sex expression was influenced by three genomic regions corresponding to F and de both on linkage Group 1, and a third locus (sex6.1) on linkage Group 6. QTLs conditioning the number of fruit per plant (fpl1.2), the number of lateral branches (mlb1.4) and fruit length/diameter ratio (ldr1.3) were associated with ll. The potential value of these marker-trait associations (i.e., yield components) for plant improvement is portended by the relatively high LOD scores (2.6 to 13.0) and associated R² values (1.5% to 32.4%) that are affiliated with comparatively few genetic factors (perhaps 3 to 10).Communicated by H.C. BeckerMention of trade name, proprietary product, or specific equipment does not constitute a guarantee or warranty by the USDA and does not imply its approval to the exclusion of other products that may be suitable     

Quantitative trait locus analysis of lateral branch-related traits in cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.) using recombinant inbred lines

A group of 224 recombinant inbred lines (RILs) was derived from a narrow cross between 2 cucumber (Cucumis sativus L.) lines, namely, S94 (Northern China type with weak lateral branch growth potential and early lateral branch sprouting time) and S06 (Northern European type with strong lateral branch growth potential and late lateral branch sprouting time). These lines were then used for investigating lateral branch-related traits. A total of 36 quantitative trait loci (QTLs) were detected for the following 4 lateral branch-related traits: lateral branch average length (LBAL), lateral branch total length (LBTL), lateral branch number (LBN), and first lateral branch node (FLBN). Further, each QTL explained 3.1% (lbtl2.1, spring) to 32.3% (lbn2.3, spring) of the observed phenotypic variance. Eleven QTLs (lbal1.1, lbtl1.1, lbn1.2, flbn1.2, etc.) for different traits were found to be clustered on the e23m18d-ME23EM6c section (7.4 cM) of linkage group (LG) 1; further, 15 QTLs (lbal2.1, lbtl2.1, lbn2.1, flbn2.1, etc.) were found to be clustered on the S94A1-ME4SA4a section (13.9 cM) of LG2. Twenty-one QTLs explained more than 10% of the phenotypic variance. Moreover, lbtl1.3 (autumn, 26.2%, logarithm of odds (LOD) = 17.4; spring, 26.9%, LOD = 17.9) had stable position and contribution in both seasons. Several sequence-anchor markers (CMBR40, F, CS30, S94A1, CSWTA11B, etc.) were closely linked with some QTLs for LBAL, LBTL, LBN, and FLBN, which can be used for the marker-assisted selection to improve the plant architecture in cucumber breeding.     

Two stable QTL involved in adult plant resistance to powdery mildew in the winter wheat line RE714 are expressed at different times along the growing season

Powdery mildew (Blumeria graminis f. sp. tritici) is one of the major diseases of wheat (Triticum aestivum). Adult plant resistance (APR) to powdery mildew is considered more durable than resistance conferred by major race-specific resistance genes. The objective of the present study was a better understanding of the genetic basis of APR in RE714 by means of QTL analysis of several resistance scores along the growing season. A population of 160 recombinant inbred lines obtained from the cross between RE714 and Hardi (susceptible) was assessed for APR under natural infection conditions during 3 years and a genetic map with whole genome coverage was developed with microsatellite and AFLP markers in this population. Two major QTL on chromosomes 5D and 6A were detected each year, and 6 minor QTL were detected only in 1 or 2 years. The QTL on chromosome 5D was detected during all the growing season each year and its R ² value varied between 8.5 and 56.3%, whereas the QTL on chromosome 6A was detected at 1–4 scoring dates in the 3 years, and its R ² value varied between 6.1 and 20.5%. The two QTL explained between 24.4 and 52.1% of the phenotypic variance for AUDPC, depending on the year. The models including QTL and cofactors in the composite interval mapping explained between 29 and 72% of the variance. The molecular markers linked to the two major QTL could be used in marker-assisted selection for adult plant resistance to powdery mildew. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The effect of semi-dwarf genes on root system size in field-grown barley

Root system size (RSS) was measured in 12 diverse barley genotypes and 157 double-haploid lines (DHs), using electric capacitance. The parents of the DHs, Derkado and B83-12/21/5, carry different semi-dwarfing genes, sdw1 and ari-e.GP, respectively. Estimates of RSS were taken in the field thrice during plant development: stem elongation (RSS1), heading (RSS2) and grain filling (RSS3). The 12 barley genotypes were assessed over 3 years and at two or three locations each year; the DH mapping population was assessed at two locations in 2002. Among the 12 barley genotypes, those with the semi-dwarf genes had greater RSS values in all 3 years (28.9, 24.6 and 15.0% in years 1, 2 and 3, respectively) compared to non-semi-dwarf controls. The DH population showed transgressive segregation on both sides of the parent means, indicating polygenic control of RSS. Quantitative trait loci (QTLs) for RSS were found on five of the seven chromosomes: 1H, 3H, 4H, 5H and 7H and these were compared with previously mapped agronomic traits. The TotalRSS QTL on 3H was associated with sdw1 and QTLs for height, plant yield and plant weight. The RSS3 QTL on 5H was associated with ari-e.GP and QTLs for height, plant yield, plant weight, harvest index and tiller number. The RSS3 QTL on 7H was also associated with a TotalRSS QTL and QTLs for plant weight and harvest index. Other RSS QTLs were not associated with any other trait studied. RSS is considered to be a polygenic trait linked to important traits, in particular to yield. The study highlights the effects of semi-dwarfing genes and discusses the potential for breeding for root traits.     

Comparative analysis of marker-assisted and phenotypic selection for yield components in cucumber

Theoretical studies suggest that marker-assisted selection (MAS) has case-specific advantages over phenotypic selection (PHE) for selection of quantitative traits. However, few studies have been conducted that empirically compare these selection methods in the context of a plant breeding program. For direct comparison of the effectiveness of MAS and PHE, four cucumber (Cucumis sativus L.; 2n = 2x = 14) inbred lines were intermated and then maternal bulks were used to create four base populations for recurrent mass selection. Each of these populations then underwent three cycles of PHE (open-field evaluations), MAS (genotyping at 18 marker loci), and random mating without selection. Both MAS and PHE were practiced for yield indirectly by selecting for four yield-component traits that are quantitatively inherited with 2–6 quantitative trait loci per trait. These traits were multiple lateral branching, gynoecious sex expression (gynoecy), earliness, and fruit length to diameter ratio. Both MAS and PHE were useful for multi-trait improvement, but their effectiveness depended upon the traits and populations under selection. Both MAS and PHE provided improvements in all traits under selection in at least one population, except for earliness, which did not respond to MAS. The populations with maternal parents that were inferior for a trait responded favorably to both MAS and PHE, while those with maternal parents of superior trait values either did not change or decreased during selection. Generally, PHE was most effective for gynoecy, earliness, and fruit length to diameter ratio, while MAS was most effective for multiple lateral branching and provided the only increase in yield (fruit per plant). Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Mapping QTL for climbing ability and component traits in common bean (<Emphasis Type="Italic">Phaseolus vulgaris</Emphasis> L.)

Common bean (Phaseolus vulgaris L.) varies in growth habit from aggressive climbing types to bush beans. Growth habit is determined by a combination of factors including determinate versus indeterminate growth, total plant height, degree of branching and internode length. Together these factors make up climbing ability. The objective of this research was to determine the quantitative trait loci (QTL) controlling climbing ability in a F_5:8 recombinant inbred line population derived from an inter-gene pool cross of an aggressive indeterminate climbing bean with type IV growth habit (G2333) by an indeterminate bush bean of type IIb growth habit (G19839). The population was planted in four randomized complete block design experiments across environments that varied in altitude (from 1,000 to 1,750 masl) and soil fertility (low versus high phosphorus). QTL were identified for plant height, internode length and number of branches per plant on a genetic map covering all common bean linkage groups with a total length of 1,175 cM. In addition a scale was developed to evaluate overall climbing ability and was also used to identify QTL. A total of 7 QTL were found for plant height, 9 for climbing ability, 6 for internode length and 1 for branch number. The largest number and most significant QTL were found on the lower half of linkage group B04 suggesting a major pleiotropic locus for growth habit traits at this location of the genome that is distinct from previously characterized genes which control plant morphology of the crop.     

Crown alterations induced by decline: a study of relationships between growth rate and crown morphology in beech (Fagus sylvatica L.)

One of the first symptoms expressed by declining trees is reduced growth in stem diameter and length increment. The possibility of a relationship between length increment and crown thinning in beech (Fagus sylvatica L.) was investigated by developing a computer model to simulate first order branching patterns of the apical 2 m of monopodially branching beech trees, 70–100 years old, for a range of length increment rates. The model was based on values for branching angle, main axis and branch length increment, number of branches produced per year and branch mortality rates for six healthy and declining trees. Shoot growth rates in the apical 2 m of the sample trees ranged from about 5 cm/year (decline class 3) to 43 cm/ year (healthy). Simulations of branching patterns in the apical 2 m of trees growing at different rates indicated that, when growth rate exceeded about 20 cm/year, total first order branch length and area explored were independent of growth rate. When growth rates fell below this value there was a reduction in total area explored and first order branch length due primarily to the formation of fewer branches. More acute branching angles contributed to a reduction in the area explored. Growth rate-related crown thinning could increase the risk of bark necrosis and secondary pathogen infection during dry and/or hot spells.     

Maintenance mechanisms of the pipe model relationship and Leonardo da Vinci’s rule in the branching architecture of <Emphasis Type="Italic">Acer rufinerve</Emphasis> trees

The pipe model relationship (constancy of branch cross-sectional area/leaf area) and Leonardo da Vinci’s rule (equality of total cross-sectional area of the daughter branches and cross-sectional area of their mother branch) are empirical rules of tree branching. Effects of branch manipulation on the pipe model relationships were examined using five Acer rufinerve trees. Half the branches in each tree were untreated (control branches, CBs), and, for the others (manipulated branches, MBs), either light intensity or leaf area (both relating to photosynthetic source activity), or shoot elongation (source + sink activities), was reduced, and responses of the pipe model relationships were followed for 2 years. The pipe model relationship in MBs changed by suppression of source activity, but not by simultaneous suppression of source + sink activities. The manipulations also affected CBs in the year of manipulation and both branches in the next year. The branch diameter growth was most affected by light, followed by shoot elongation and leaf area, in that order. Because of the decussate phyllotaxis of A. rufinerve, one branching node can potentially have one main and two lateral branches. Analysis of 295 branching nodes from 13 untreated trees revealed that the da Vinci’s rule held in branching nodes having one shed branch but not in the nodes without branch shedding, indicating the necessity of natural shedding of branches for da Vinci’s rule to hold. These analyses highlight the importance of the source–sink balance and branch shedding in maintenance of these empirical rules. This article was contributed at the invitation of the Editorial Committee.     

Construction of a cucumber genetic linkage map with SRAP markers and location of the genes for lateral branch traits

Using SRAP (sequence-related amplified polymorphism) markers a genetic linkage map of cucumber was constructed with a population consisting of 138 F₂ individuals derived from a cross of the two cucumber lines, S06 and S52. In the survey of parental polymorphisms with 182 primer combinations, 64 polymorphism-revealing primer pairs were screened out, which generated totally 108 polymorphic bands with an average of 1.7 bands per primer pair and at most 6 bands from one primer pair. The constructed molecular linkage map included 92 loci, distributed in seven linkage groups and spanning 1164.2 cM in length with an average genetic distance of 12.6 cM between two neighboring loci. Based on this linkage map, the quantitative trait loci (QTL) for the lateral branch number (lbn) and the lateral branch average length (lbl) in cucumber were identified by QTLMapper1.6. A major QTL lbn1 located between ME11SA4B and ME5EM5 in LG2 could explain 10.63% of the total variation with its positively effecting allele from S06. A major QTL lbl1 located between DC1OD3 and DC1EM14 in LG2 could account for 10.38% of the total variation with its positively effecting allele from S₀₆.     

Population development by phenotypic selection with subsequent marker-assisted selection for line extraction in cucumber (<Emphasis Type="Italic">Cucumis sativus</Emphasis> L.)

Cucumber (Cucumis sativus L.; 2n=2x=14) has a narrow genetic base, and commercial yield of US processing cucumber has plateaued in the last 15 years. Yield may be increased by altering plant architecture to produce unique early flowering (days to flower, DTF), female (gynoecious, GYN), highly branched (multiple lateral branching, MLB), long-fruited (length:diameter ratio, L:D) cultivars with diverse plant statures. The genetic map position of QTL conditioning these quantitatively inherited yield component traits is known, and linked molecular markers may have utility in marker-assisted selection (MAS) programs to increase selection efficiency, and effectiveness. Therefore, a base population (C₀), created by intermating four unique but complementary lines, was subjected to three cycles (C₁–C₃) of phenotypic (PHE) mass selection for DTF, GYN, MLB, and L:D. In tandem, two cycles of marker-assisted backcrossing for these traits began with selected C₂ progeny (C_2S) to produce families (F₁[i.e., C_2S × C_2S], and BC₁ [i.e., F₁ × C_2S]) for line extraction, and for comparative analysis of gain from selection by PHE selection, and MAS. Frequencies of marker loci were used to monitor selection-dependent changes during PHE selection, and MAS. Similar gain from selection was detected as a result of PHE selection, and MAS for MLB (~0.3 branches/cycle), and L:D (~0.1 unit increase/cycle) with concomitant changes in frequency at linked marker loci. Although genetic gain was not realized for GYN during PHE selection, the percentage of female flowers of plants subjected to MAS was increased (5.6–9.8% per cycle) depending upon the BC₁ population examined. Selection-dependent changes in frequency were also detected at marker loci linked to female sex expression during MAS. MAS operated to fix favorable alleles that were not exploited by PHE selection in this population, indicating that MAS could be applied for altering plant architecture in cucumber to improve its yield potential. The cost of publishing this paper was defrayed in part by the payment of page charges. Under postal regulations, this paper therefore must be hereby, marked advertisement solely to indicate this fact. Mention of a trade name, proprietary product, or specific equipment does not constitute a guarantee or warranty by the USDA and does not imply its approval to the exclusion of other products that may be suitable.     

Quantitative trait locus analysis of lateral branch– related traits in cucumber (Cucumis sativus L.) using recombinant inbred lines

A group of 224 recombinant inbred lines (RILs) was derived from a narrow cross between 2 cucumber (Cucumis sativus L.) lines, namely, S94 (Northern China type with weak lateral branch growth potential and early lateral branch sprouting time) and S06 (Northern European type with strong lateral branch growth potential and late lateral branch sprouting time). These lines were then used for investigating lateral branch-related traits. A total of 36 quantitative trait loci (QTLs) were detected for the following 4 lateral branch-related traits: lateral branch average length (LBAL), lateral branch total length (LBTL), lateral branch number (LBN), and first lateral branch node (FLBN). Further, each QTL explained 3.1% (lbtl2.1, spring) to 32.3% (lbn2.3, spring) of the observed phenotypic variance. Eleven QTLs (lbal1.1, lbtl1.1, lbn1.2, flbn1.2, etc.) for different traits were found to be clustered on the e23m18d-ME23EM6c section (7.4 cM) of linkage group (LG) 1; further, 15 QTLs (lbal2.1, lbtl2.1, lbn2.1, flbn2.1, etc.) were found to be clustered on the S94A1-ME4SA4a section (13.9 cM) of LG2. Twenty-one QTLs explained more than 10% of the phenotypic variance. Moreover, lbtl1.3 (autumn, 26.2%, logarithm of odds (LOD) = 17.4; spring, 26.9%, LOD = 17.9) had stable position and contribution in both seasons. Several se-quence-anchor markers (CMBR40, F, CS30, S94A1, CSWTA11B, etc.) were closely linked with some QTLs for LBAL, LBTL, LBN, and FLBN, which can be used for the marker-assisted selection to improve the plant architecture in cucumber breeding.     

Mapping and QTL analysis of horticultural traits in a narrow cross in cucumber (Cucumis sativus L.) using random-amplified polymorphic DNA markers

An 80-point genetic map [77 random-amplified polymorphic DNAs (RAPD), F (female sex expression), de (determinate), and ll (little leaf)] was constructed from a narrow cross in cucumber using the determinate, gynoecious, standard-sized leaf line G421 and the indeterminate, monoecious, little leaf line H-19. The map defined nine linkage groups and spanned ca. 600 cM with an average distance between markers of 8.4 ± 9.4 cM. The RAPD loci BC-551 and BC-592 were found to flank ll at 3.4 and 12.2 cM, respectively. The locus OP-L18-2 was linked (16 cM) to de, and the F locus was flanked by markers at 44 and 31 cM. One-hundred F3 families were used to identify quantitative trait loci (QTL) for sex expression, main stem length, number of lateral branches, days to anthesis, fruit number and weight, fruit length and diameter, and fruit length: diameter ratio in two replicated test locations (Wisconsin and Georgia). QTL on linkage group B explained major portions (R2 = ca. 2 to 74%) of the variation observed for sex expression, main stem length, lateral branch number, and fruit diameter (LOD = 2.1 to 29.8). Although ca. 62 to 74% of the variation for sex expression was associated with a putative QTL spanning the F locus (OP-AJ-2 to F and F to de), other regions (three) of the genome were important for the determination of sex in the F3 families examined depending upon environment. The number of genomic regions affecting main stem length (five) and number of lateral branches (three) coincided with expectations as determined by calculations of minimum number of genes in previous studies. Evaluation of QTL associated with several fruit number determinants of early, first-harvest yield demonstrating additive genetic variance (i.e., sex expression, main stem length, and number of laterals) suggests that marker-assisted selection may have utility for the development of determinate, multiple lateral branching germplasm suited for once-over mechanical harvesting in this population.     

Detection of QTL for yield-related traits using recombinant inbred lines derived from exotic and elite US Western Shipping melon germplasm

The inheritance of yield-related traits in melon (Cucumis melo L.; 2n = 2x = 24) is poorly understood, and the mapping of quantitative trait loci (QTL) for such traits has not been reported. Therefore, a set of 81 recombinant inbred lines (RIL) was developed from a cross between the monoecious, highly branched line USDA 846-1 and a standard vining, andromonoecious cultivar, ‘Top Mark’. The RIL, parental lines, and three control cultivars (‘Esteem’, ‘Sol Dorado’, and ‘Hales Best Jumbo’) were grown at Hancock, WI and El Centro, CA in 2002, and evaluated for primary branch number (PB), fruit number per plant (FN), fruit weight per plant (FW), average weight per fruit (AWF), and percentage of mature fruit per plot (PMF). A 190-point genetic map was constructed using 114 RAPD, 43 SSR, 32 AFLP markers, and one phenotypic trait. Fifteen linkage groups spanned 1,116 cM with a mean marker interval of 5.9 cM. A total of 37 QTL were detected in both locations (PB = 6, FN = 9, FW = 12, AWF = 5, and PMF = 5). QTL analyses revealed four location-independent factors for PB (pb1.1, pb1.2, pb2.3, and pb10.5), five for FN (fn1.1, fn1.2, fn1.3, fn2.4, and fn8.8), four for FW (fw5.8, fw6.10, fw8.11, and fw8.12), two for AWF (awf1.3 and awf8.5), and one for PMF (pmf10.4). The significant (P ≤ 0.05) positive phenotypic correlations observed among PB, FN, and FW, and negative phenotypic correlations between PB and AWF and between FN and AWF were consistent with the genomic locations and effects (negative vs. positive) of the QTL detected. Results indicate that genes resident in highly branched melon types have potential for increasing yield in US Western Shipping type germplasm via marker-assisted selection.     

Size-dependence of reproductive allocation of Sargassum thunbergii (Sargassaceae, Phaeophyta) in Bohai Bay, China

Reproductive allocation (the proportion of biomass allocated to reproductive tissue, RA) in Sargassum thunbergii was studied in Yantai, Shandong Peninsula, southern coast of Bohai Bay, China. Annual reproduction initiated in mid-June and peaked in mid-July (90 ± 8% fertile thalli and 75 ± 6% RA mean). Both RA and percentage of fertile thalli exhibited significant temporal variations during reproduction. Sterile thalli were only observed in small length hierarchies at peak reproduction and mean values of RA showed a significantly hierarchical variation, suggesting that the size of thalli played an important role in reproduction and RA were size-dependent. Numerous receptacles were produced along the lateral branches during the reproductive period. A distinct seasonal pattern was observed wherein the presence of lateral branches was followed by the onset of reproduction. RA was positively correlated with the number of lateral branches, as well as the total length of lateral branches. In addition, fertile thalli decayed quickly after peak reproduction. The probability of decay was evidently higher for fertile than for sterile thalli, because all surviving thalli were sterile and short during July–August. So, a trade-off between reproduction and survival may exist at individual levels in S. thunbergii.     

Agrobacterium rhizogens mediated transformation of Rauvolfia serpentina: Regeneration and alkaloid synthesis

Shoot cultures of Rauvolfia serpentina infected with Agrobacterium rhizogenes 15834 produced tumourous tissue at the site of injection, which eventually developed callus with hairy roots. Sporadic shoot formation occurred from the hairy roots. The shoots were grown to maturity in the green house. The mature transformed plants (RST) showed distinct variations in their physiological characteristics. The flowers of the transformed plants were more delicate and less pigmented when compared to the flowers of the mature normal plants. The roots of the transformed plants were hairy with a number of lateral branches, whereas the roots of the normal plant had very few lateral branches. The biomass of the transformed plant was 86.39 g/plant (fresh wt), significantly higher than the normal plant which was 77.3 g/plant (fresh wt). The total alkaloid content in the mature transformed plant (0.073 g per plant) was similar to the normal plant (0.078 g per plant), although the hairy roots contained little alkaloid.Abbreviations MS Murashige & Skoog's basal medium - MLS modified Linsmaier & Skoog's basal medium - BA benzyladenine - NAA naphthalene acetic acid - TLC thin layer chromatography - HPLC high performance liquid chromatography     

Developmental responses of individual Onobrychis plants to spatial heterogeneity

An experimental study was undertaken to assess the extent to which better-situated branches correlatively inhibit other branches on the same plant which are growing in relatively inferior conditions. The experiments were carried out on naturally-grown Onobrychis squarrosa L. (Papilionaceae), a dominant annual plant of the Mediterranean region of Israel. Treatments were carried out (i) on young plants that only had a seminal shoot, and (ii) on plants after lateral branches had started growing. Differential shade conditions were achieved by the repeated removal of neighbours on one side of the plants. The plants were either left intact or damaged by removing different parts of their branch system. In intact plants, growth responses to the differential light conditions which were expressed by the number of branches, leaves and fruits showed some evidence for support of the shaded branches by the exposed branches on the same plant. In contrast, heterogeneous treatments of both shade and branch damaging led to development that reflected marked correlative inhibition of the shaded parts of the plant. The results show that a latent potential for correlative inhibition between branches exists throughout plant development and that in Onobrychis it can be readily realised when plants are damaged. This could depend on known traits of auxin acting as a correlative signal of growing branches. The observed responses of Onobrychis can be understood as an adaptive strategy which reflects the low reliability of environmental signals and the high cost of changing the course of development, especially in short-lived annual plants.     

Overexpression of the maize Teosinte Branched1 gene in wheat suppresses tiller development

The number of viable shoots influences the overall architecture and productivity of wheat (Triticum aestivum L.). The development of lateral branches, or tillers, largely determines the resultant canopy. Tillers develop from the outgrowth of axillary buds, which form in leaf axils at the crown of the plant. Tiller number can be reduced if axillary buds are not formed or if the outgrowth of these buds is restricted. The teosinte branched1 (tb1) gene in maize, and homologs in rice and Arabidopsis, genetically regulate vegetative branching. In maize, increased expression of the tb1 gene restricts the outgrowth of axillary buds into lateral branches. In this study, the maize tb1 gene was introduced through transformation into the wheat cultivar "Bobwhite" to determine the effect of tb1 overexpression on wheat shoot architecture. Examination of multiple generations of plants reveals that tb1 overexpression in wheat results in reduced tiller and spike number. In addition, the number of spikelets on the spike and leaf number were significantly greater in tb1-expressing plants, and the height of these plants was also reduced. These data reveal that the function of the tb1 gene and genetic regulation of lateral branching via the tb1 mode of action is conserved between wheat, rice, maize and Arabidopsis. Thus, the tb1 gene can be used to alter plant architecture in agriculturally important crops like wheat.     

QTL analysis for aphid resistance and growth traits in apple

The rosy apple aphid (Dysaphis plantaginea), the leaf-curling aphid (Dysaphis cf. devecta) and the green apple aphid (Aphis pomi) are widespread pest insects that reduce growth of leaves, fruits and shoots in apple (Malus × domestica). Aphid control in apple orchards is generally achieved by insecticides, but alternative management options like growing resistant cultivars are needed for a more sustainable integrated pest management (IPM). A linkage map available for a segregating F₁-cross of the apple cultivars ‘Fiesta’ and ‘Discovery’ was used to investigate the genetic basis of resistance to aphids. Aphid infestation and plant growth characteristics were repeatedly assessed for the same 160 apple genotypes in three different environments and 2 consecutive years. We identified amplified fragment length polymorphism (AFLP) markers linked to quantitative trait loci (QTLs) for resistance to D. plantaginea (‘Fiesta’ linkage group 17, locus 57.7, marker E33M35–0269; heritability: 28.3%), and to D. cf. devecta (‘Fiesta’ linkage group 7, locus 4.5, marker E32M39–0195; heritability: 50.2%). Interactions between aphid species, differences in climatic conditions and the spatial distribution of aphid infestation were identified as possible factors impeding the detection of QTLs. A pedigree analysis of simple sequence repeat (SSR) marker alleles closely associated with the QTL markers revealed the presence of the alleles in other apple cultivars with reported aphid resistance (‘Wagener’, ‘Cox’s Orange Pippin’), highlighting the genetic basis and also the potential for gene pyramiding of aphid resistance in apple. Finally, significant QTLs for shoot length and stem diameter were identified, while there was no relationship between aphid resistance and plant trait QTLs. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Optimum allocation of resources for QTL detection using a nested association mapping strategy in maize

In quantitative trait locus (QTL) mapping studies, it is mandatory that the available financial resources are spent in such a way that the power for detection of QTL is maximized. The objective of this study was to optimize for three different fixed budgets the power of QTL detection 1 − β* in recombinant inbred line (RIL) populations derived from a nested design by varying (1) the genetic complexity of the trait, (2) the costs for developing, genotyping, and phenotyping RILs, (3) the total number of RILs, and (4) the number of environments and replications per environment used for phenotyping. Our computer simulations were based on empirical data of 653 single nucleotide polymorphism markers of 26 diverse maize inbred lines which were selected on the basis of 100 simple sequence repeat markers out of a worldwide sample of 260 maize inbreds to capture the maximum genetic diversity. For the standard scenario of costs, the optimum number of test environments (E _opt) ranged across the examined total budgets from 7 to 19 in the scenarios with 25 QTL. In comparison, the E _opt values observed for the scenarios with 50 and 100 QTL were slightly higher. Our finding of differences in 1 − β* estimates between experiments with optimally and sub-optimally allocated resources illustrated the potential to improve the power for QTL detection without increasing the total resources necessary for a QTL mapping experiment. Furthermore, the results of our study indicated that also in studies using the latest genomics tools to dissect quantitative traits, it is required to evaluate the individuals of the mapping population in a high number of environments with a high number of replications per environment.     

辽东栎林内不同小生境下幼树植冠构型分析

以黄土高原黄龙山林区辽东栎林内3个小生境（林下、林隙、林缘）下辽东栎天然更新幼树为研究对象,采用典型抽样法对辽东栎幼树侧枝、叶片和树冠的空间分布状况以及生物量分配状况进行调查分析,探讨微生境与幼树植冠构型特征的关系,明确辽东栎幼树对不同小生境的适应策略,为栎林经营和林分结构优化提供理论依据。结果显示：（1）3种生境下辽东栎幼树构型发生了可塑性变化,林下幼树树冠层次比较单一,林隙与林缘的幼树树冠层次更加丰富。（2）由林下至林缘,幼树的树高、枝下高呈逐渐减小的趋势,而地径变化趋势与之相反;幼树的冠幅、树冠面积、树冠率呈先增加后减小的趋势,并且林下与林隙、林缘的差异显著;幼树的总体分枝率、逐步分枝率、枝径比呈先增加后减小的趋势。（3）3种生境下,幼树的一级枝的枝长、直径与倾角随着树高的增加而呈减小的趋势,但3种生境的差异不显著;林下一级枝主要分布在冠层中上部,而林隙与林缘一级枝主要分布在冠层中下、中上部。（4）由林下至林缘幼树叶长、叶宽、单叶面积和比叶面积逐渐降低,而单株叶数、叶总面积、叶面积指数呈先增大后减小趋势;与其他2种生境相比林下叶片分布趋于冠层上部。（5）幼树地上部分生物量中林下主干生物量占83%,枝和叶生物量只占17%;而林隙与林缘虽然各部位生物量有所差异但比例基本一致,其中主干占66%左右,枝和叶生物量占34%左右。研究表明,林隙生境下幼树的构型优于林缘和林下生境,在今后栎林的经营中,可以通过适当间伐来增加林隙数量,为森林更新和结构的优化提供有利条件。