烟草薄层培养生长素结合蛋白ABP1的定位和ABP1在细胞分化中的变化

以烟草（Nicotiana tabacum L.)盛花期花梗薄层为材料,研究营养芽分化的不同时期生长素结合蛋白（ABP1)在组织与细胞中的分布变化,免疫荧光标记结果表明,烟草花梗中ABP1主要分布于表皮及亚表皮1－2层细胞内。不同分化期ABP1在烟草花梗薄层原生质体中的表达不同,细胞分化旺盛期ABP1的表达最强,分化后期ABP1的表达有所减弱;Western blotting结果表明,ABP1多克隆抗血清与烟草花梗薄层细胞及分化过程中26kD蛋白有免疫交叉反应。     

玉米、小麦、水稻原生质体制备条件优化

玉米Zea mays L.、小麦Triticum aestivum L.、水稻Oryza sativaL.是三大重要粮食作物,对其原生质体制备条件的优化具有重要意义.以玉米(综3)、小麦(中国春)、水稻(日本晴)10日龄幼苗为材料,研究了叶肉细胞原生质体分离过程中的酶浓度、酶解时间和离心力大小等因素对产量和活力的影响.结果表明:酶浓度和酶解时间对原生质体产量影响显著,随着酶解液浓度和酶解时间的提高,原生质体产量增加,但细胞碎片同时增多.水稻经真空处理后,原生质体产量大幅度提高.通过正交实验设计得出如下结果:玉米叶肉细胞原生质体分离的最佳条件为:纤维素酶1.5％,离析酶0.5％,50 r/min酶解7h,100×g离心2 min收集,原生质体产量为7×106/g FW;小麦叶肉细胞原生质体分离的最佳条件为:纤维素酶1.5％,离析酶0.5％,50 r/min酶解5h,100×g离心2 min收集,原生质体产量为6×106/g FW;水稻叶肉细胞原生质体分离的最佳条件为:纤维素酶2.0％,离析酶0.7％,50 r/min酶解7h,1 000×g离心2 min收集,得到的原生质体产量为6×106/g FW.通过二乙酸荧光素染色发现原生质体活力均在90％以上.用PEG-Ca2+介导法将含有绿色荧光蛋白的质粒转化入原生质体,转化率可达50％ ～80％.     

The isolation, culture and division of protoplasts from citrus cotyledons

High yields (2.3 × 10⁵ to 1.3 × 10⁶ protoplasts/g.f.wt.) of isolated protoplasts were obtained from cotyledons of Cirus sinensis (L.) Osb. 'Valencia'. Osmotic potential of the medium and enzyme concentrations were important in obtaining high viability of preparations as indicated by FDA fluorescence. Adding malt extract to a Murashige-Tucker basal medium increased plating efficiencies somewhat, but not the rate or duration of cell division. However, modifying the NAA and kinetin concentration optimized plating efficiencies (up to 20%) of protoplasts and also the rate or duration of cell division. The highest plating efficiency and number of cells per colony were obtained on a defined medium containing NAA (15 μ M ). and kinetin (4.6 μ M ). Coincidence of percentage protoplast viability after 13 days (assessed by FDA fluorescence) with plating efficiency after 21 days indicates that FDA fluorescence is an accurate indicator of citrus protoplast viability.     

Isolation and culture of protoplasts from cell suspension cultures of Duboisia myoporoides with subsequent plant regeneration

Protoplasts were isolated from suspension cultures of various cell lines of Duboisia myoporoides R. Br. There were differences among cell lines with respect to optimal conditions for protoplast isolation including the amount and kind of enzymes and the osmoticum concentration. Protoplasts isolated from one cell line were successfully cultured and induced to form cell colonies in liquid modified B5 medium. Addition of conditioned medium, coconut milk and glucose as an osmoticum to protoplast culture medium as well as maintenance of high protoplast density in culture (> 10⁵/ml) were essential to obtain protocolony formation. Reduction of osmoticum concentration and deletion of coconut milk and conditioned medium from the culture medium were necessary to allow further colony development leading to cellus formation. Intact plants regenerated from calli derived from protoplasts were successfully transferred to pots.     

草木樨状黄芪甲硫氨酸抗性系的原生质体培养及植株再生

建立了草木樨状黄芪(Astragalus melilotoides Pall．)甲硫氨酸抗性系原生质体再生植株的实验体系。以茎切段诱导的松软愈伤组织为材料,通过酶法分离出大量有活力的原生质体。原生质体经培养持续分裂形成了愈伤组织,并高频率地分化出再生苗。比较了不同培养基、培养方法和培养密度对原生质体分裂和再生的影响。结果表明,原生质体以3×10⁵/mL的植板密度,采用琼脂糖岛法培养在附加1．0mg／L 2,4-二氯苯氧乙酸(2,4-D)、0．5mg／L 6-苄氨基嘌呤(6BA)、500mg／L水解酪蛋白、3％蔗糖、0．3mol／L甘露醇的KM_8p培养基中,可获得最佳效果,其细胞分裂频率达38％左右。原生质体培养后仍然保持对甲硫氨酸的抗性,同时对乙硫氨酸表现交叉抗性。     

利用荧光染色和流式细胞技术辅助卵孢小奥德蘑原生质体制备与再生研究

本研究以卵孢小奥德蘑液体培养菌丝作为实验材料,利用单因子变量法探索研究了菌丝培养时间、酶浓度、酶解时间、酶解温度、稳渗剂类型对卵孢小奥德蘑原生质体制备的影响,并对原生质体再生培养基进行选择和优化。通过荧光染色,利用激光共聚焦显微镜和流式细胞仪对原生质体的制备过程、得率和活力进行研究。结果表明,将卵孢小奥德蘑菌丝在液体培养基中培养5d收集菌丝体,以甘露醇作为渗透压稳定剂,在溶壁酶浓度2%、30℃条件下酶解5h,获得的原生质体得率最高,达2.0×10 ⁷个/mL;通过流式细胞仪分析,约57.69%的原生质体细胞为活细胞;在RM培养基中再生效果最好,再生率为(0.103±0.025)%。研究结果可以为卵孢小奥德蘑育种与食用菌原生质体制备再生提供研究基础。     

Fertile plant regeneration from barley (Hordeum vulgare L.) protoplasts isolated from primary calluses

Barley (Hordeum vulgare L.) protoplasts were isolated from the immature embryo-derived primary calluses. These protoplasts were cultured with nurse cells, and they then divided to form colonies. After transfer of the colonies to regeneration medium, either green or albino shoots were regenerated from these colonies. A high agarose concentration (2.4% w/v) in the protoplast culture medium promoted protoplast division. The plantlets that developed strong root systems were transferred to the soil. These plants flowered and have set seeds.     

一种有效的双孢蘑菇原生质体制备及瞬时转化体系

原生质体的制备与再生是双孢蘑菇进行遗传转化的基础,通过研究得到制备双孢蘑菇原生质体的最佳条件是：取培养15d的菌丝振荡培养7d,溶壁酶浓度为1mg/mL的0.6mol/L KCl酶解液、温度30℃、45r/min条件下摇培10h,经过富集精制后的原生质体（4×10 ⁶/mL）可进行瞬时转化。利用Ab-eGFP进行转化,在20min、24h、48h后可观察到GFP荧光,并且在24h和48h可恢复细胞壁增殖,瞬时转化后亦可复壁增殖。研究结果为双孢蘑菇原生质体的稳定遗传转化及后续利用原生质体建立CRISPR-Cas9基因组编辑系统等提供一定的理论依据。     

Microcallus formation from maize protoplasts prepared from embryogenic callus

Conditions have been developed that induce maize (Zea mays L.) protoplasts to re-synthesize cell walls and to initiate cell divisions. Two types of embryogenic maize callus were used as a source of protoplasts: a heterogeneous callus (Type I) derived from immature embryos after three weeks in culture, and a friable, rapidly growing callus (Type II) selected from portions of the Type I callus. Many variables in the growth conditions of the donor tissue (type of medium, transfer schedule, age of callus), protoplast isolation solutions (pH, osmolarity, type and concentration of cell wall hydrolyzing enzymes, addition of polyamines) and conditions (amount of time in enzyme, amount of tissue per volume of enzyme incubation medium, agitation, preplasmolysis of source tissue, type of callus), and purification procedures (filtration and-or flotation), were found to affect both yield and viability of protoplasts (based upon fluorescein-diacetate staining). Our isolation procedure yielded high numbers of viable, uninucleated maize callus protoplasts which were densely cytoplasmic and varied in size from 20 to 50 m in diameter. Protoplasts plated in solid medium formed walls and divided several times. Of several gelling agents tested for protoplast propagation, only agarose resulted in protoplasts capable of sustained divisions leading to the formation of microcalli. Plating efficiency was established over a wide range of protoplast densities (10³–10⁷ protoplasts/ml). Highest plating efficiency (25%) was obtained at 1·10⁶ protoplasts/ml). The resulting microcalli grew to be dense clusters of about 0.1–0.5 mm in diameter and then stopped growing. Nurse cultures of maize and carrot (Daucus carota L.), were used to establish that individual protoplasts (not contaminating cells or cell clusters) formed walls and divided. Nurse cultures also increased the efficiency of microcallus formation from protoplasts.Abbreviations 2,4-D 2,4-dichlorophenoxyacetic acid - MS Murashige and Skoog (1962) salts - MS 1D Murashige and Skoog salts with 1 mg/l 2,4-D - MS 2D Murashige and Skoog salts with 2 mg/l 2,4-D - N₆ medium of Chu et al. (1975) - NN67-mod medium of Nitsch and Nitsch (1967) as modified in the present paper - FDA fluorescein diacetate - LMP low melting point     

Callus regeneration from Trifolium subterraneum protoplasts and enhanced protoplast division by low-voltage treatment and nurse cells

Seedling and suspension culture protoplasts of subterranean clover (Trifolium subterraneum L.) were successfully cultured in semi-solid drops of calcium alginate and ultrafiltered liquid medium. Protoplast-derived subterranean-clover colonies developed as the osmolality was lowered over three steps. Callus was established from these colonies. Calli derived from protoplasts have failed to regenerate on a range of media. The frequency of dividing subterranean-clover protoplasts was increased in the presence of lucerne (Medicago sativa L.) nurse cells. Low-voltage treatments (200 mV) for the first 16–132 hours of culture also resulted in a 100% increase in the frequency of dividing protoplasts.     

甘蓝型油菜与蔊菜的原生质体融合与植株再生

以甘蓝型油菜下胚轴和蔊菜叶片为外植体提取原生质体, 采用PEG-高pH、高Ca²⁺附加DMSO的原生质体融合方法, 用液体浅层静置培养融合体, 获得了10株融合杂种, 观察了杂种形态学和细胞学。结果表明：1%纤维素酶+0.2%离析酶+3 mmol/L MES 酶解14 h 可获得较高产率的油菜原生质体, 0.25% 纤维素酶+0.5%离析酶+5 mmol/L MES酶解12 h可获得较高产率的蔊菜原生质体; 30% PEG + 0.3 mol/L葡萄糖+50 mmol/L CaCl₂•2H₂O +15%DMSO的融合条件下, 获得了10.4%的融合率; 实验所获的原生质体融合材料可作为新种质。     

霸王的原生质体培养的研究

目的：为利用原生质体融合技术转移霸王抗旱基因。方法：采用酶解法分离霸王原生质体,比较了霸王子叶和愈伤组织游离原生质体的产量和活力,不同渗透压和起始密度对原生质体分裂频率的影响。结果：愈伤组织游离的原生质体产量和活力均高于子叶,原生质体产率可达2.4×106个/g.FW,活力达89%。采用液体浅层培养,在附加2,4-D（2mg/L）、6-BA（1.0mg/L）、2%蔗糖和甘露醇（0.4mol/L）的DPD培养基中,原生质体分裂频率最高,达68.6%。转移到附加2-iP（3mg/L）、KT（1.0mg/L）、6-BA（1.0mg/L）的分化培养基上,获得2个再生苗。结论：采用酶解法游离霸王愈伤组织,可获得高活力和高分裂频率的霸王原生质体。     

Establishment of embryogenic callus and high protoplast yielding suspension cultures of sugarcane (Saccharum spp. hybrids)

For 18 sugarcane cultivars, four distinct callus types developed on leaf explant tissue cultured on modified MS medium, but only Type 3 (embryogenic) and Type 4 (organogenic) were capable of plant regeneration. Cell suspension cultures were initiated from embryogenic callus incubated in a liquid medium. In stage one the callus adapted to the liquid medium. In stage two a heterogeneous cell suspension culture formed in 14 cultivars after five to eight weeks of culture. In stage three a homogeneous cell suspension culture was developed in six cultivars after 10 to 14 weeks by selective subculturing to increase the proportion of actively dividing cells from the heterogeneous cell suspension culture. Plants were regenerated from cell aggregates in heterogeneous cell suspension cultures for up to 148 days of culture but plants could not be regenerated from homogeneous cell suspension cultures. High yields of protoplasts were obtained from homogeneous cell suspension cultures (3.4 to 5.2 × 10⁶ protoplasts per gram fresh weight of cells [gfwt^-1]) compared to heterogeneous cell suspension cultures (0.1 × 10⁶ protoplasts gfwt^-1). Higher yields of protoplasts were obtained from homogeneous cell suspension cultures for cultivars Q63 and Q96 after regenerating callus from the cell suspension cultures, then recycling this callus to liquid medium (S-cell suspension cultures). This process increased protoplast yield to 9.4 × 10⁶ protoplasts gfwt^-1. Protoplasts isolated from S-cell suspension cultures were regenerated to callus and recycled to produce SP-cell suspension cultures yielding 6.4 to 13.2 × 10⁶ protoplasts gfwt^-1. This recycling of callus to produce S-cell suspension cultures allowed protoplasts to be isolated for the first time from cell lines of cultivars Q110 and Q138.     

Effects of nutrients,cell density and culture techniques on protoplast regeneration and early protonema development in a moss,Physcomitrella patens

To regenerate auxotrophic mutants of Physcomitrella patens, two media of increasing complexity were developed. The survival rate of protoplasts was around 30% higher on full medium when compared to standard minimal medium. Protoplast survival was higher in a medium containing 2.5 mmol/L ammonium tartrate compared to a medium with 5 mmol/L of this compound. Solid medium had a positive effect on protoplast survival compared to either liquid medium or solid medium overlaid with cellophane; the maximum survival rate being 31.6%. However, the number of surviving protoplasts without any cell division during the first ten days increased on solid medium. Density and survival rate of protoplasts were positively correlated, but the formation of long protonema filaments decreased markedly. The effect of different protoplast densities could be explained partly by physiologically active compounds excreted into the medium.     

PEG介导的黑附球菌遗传转化体系的建立

以生防真菌黑附球菌原生质体为受体、潮霉素抗性基因（ hph）为筛选标记,应用PEG介导法进行了遗传转化体系的研究。潮霉素敏感性测试结果表明,黑附球菌对潮霉素的耐受浓度为50mg/L。PEG介导的黑附球菌原生质体最佳遗传转化体系为：30℃下用2%裂解酶酶解黑附球菌菌丝2h,过滤收集原生质体,经MTC清洗重悬后将质粒pYF11-hph转化黑附球菌原生质体,在RM培养基中混匀再生;经潮霉素药剂筛选和PCR验证,表明外源基因 hph已转入到黑附球菌中并获得稳定表达。本实验成功地建立了稳定的PEG介导的黑附球菌遗传转化体系,为研究其代谢途径、生防机制及构建工程菌株提供了技术保障。     

Somatic embryogenesis and plant regeneration from isolated protoplasts of Lavatera thuringiaca

Embryogenic cell suspensions of Lavatera thuringiaca L. were established from leaf petiole and shoot regeneration was achieved when cells were plated on medium without growth regulators. We tested three methods for protoplast culture, isolated from a one-year old embryogenic cell suspension, to determine the best conditions for L. thuringiaca protoplast culture and shoot regeneration. The highest protoplast plating efficiency was obtained with the agaroseembedded method, reaching 30%, while the nursing culture method gave 5% when the protoplasts were plated over Whatman paper No. 2. However, the same nursing culture failed to produce protoplast-derived microcalluses when the protoplasts were plated on a nitrocellulose filter. The liquid thin layer method gave the lowest plating efficiency with only 0.5%. Shoot regeneration from protoplast-derived microcalluses was achieved in two steps; first, globular embryo development was favored in medium low in auxin (2,4-d and BA at 0.01 and 0.05 mg 1^-1, respectively), second, the globular embryos further differentiate into shoots in medium without growth regulators or in medium containing GA₃ (0.5 to 1.0 mg 1^-1).Abbreviations 2,4-d 2,4-dichlorophenoxyacetic acid - BA benzyladenine - GA₃ gibberellic acid - NAA -naphthaleneacetic acid - IBA indole-3-butyric acid     

Preparation and fusion properties of protoplasts from mature pollen of Nicotiana tabacum

Summary A method to remove the exine from mature tobacco pollen and to release numerous intact pollen protoplasts has been developed. Post-anthesis binucleate pollen was treated with water, buffered with MES at pH 5.5, for two hours. Rupture of the exine was caused by the force of pollen hydration exposing the intine to subsequent enzymatic maceration. The high osmotic pressure (1000 mOsm·kg^-1 H₂O) of pollen protoplasts required a special maceration medium, 4% KCl (w/v). Action of an enzyme solution containing 1% (w/v) Macerozyme and 1% (w/v) Cellulase gave rise to viable protoplasts within 4 hours. When cultured in a tobacco mesophyll protoplast culture medium, the pollen protoplasts underwent regeneration of a cell wall, formation of various tube-shaped structures, and division of the generative nucleus into two nuclei. Using a PEG/Ca²⁺ method pollen protoplasts were fused with diploid mesophyll protoplasts. Evidence of transfer of chloroplasts into the pollen protoplasts was observed after one day of culture.Abbreviations BCP bromocresol purple - FDA fluoresceindiacetate - MES 2-(N-morpholino) ethanesulfonic acid - PEG polyethyleneglycol     

Sucrose biosynthesis in Dunaliella

Four independent kinds of observations indicate that the cell wall regenerated by oat (Avena sativa L.) and corn (Zea mays L.) protoplasts in culture is less well developed than that regenerated by tobacco (Nicotiana tabacum L.) protoplasts. Following wall regeneration the cereal protoplasts remained susceptible to osmotic shock upon transfer to water, showed great enlargement, stained poorly with calcofluor white, and maintained a positive internal electrical potential. The development of a negative membrane potential by tobacco protoplasts in culture often occurred simultaneously with the onset of cell division. Since division was observed only in protoplasts which had regenerated good cell walls and had re-established negative membrane potentials it is suggested that culture conditions which favor these two processes should improve protoplast viability.     

Isolation,Culture and Plant Regeneration of Protoplasts from an Embryogenic Callus Tissue of Gossypium hirsutum

Protoplasts were isolated and cultured from hypocotyl embryogenic callus tissue of Gossypium hirsutum L. cv. "Lumian 6". The highest yields of viable protoplasts were obtained from a vigorous embryogenic callus 7 to 9 d old subcultured on MS medium supplemented with 2 mg/L IAA and 1 mg/L KT using a solution of 1% cellulase Onozuka R-10, 1% pectinase, 0.7 mmol/L KH2PO4, 2.5 mmol/L Ca2+ , and 0.5 mol/L osmoticum (mannitol), at pH 5.8 and at a temperature of 30 ℃. After separation and purification (in 21% sucrose floatation medium), the protoplasts were laid up in a quiet liquid protoplast culture medium containing K3 salts, NT vitamins with 0.1 mg/L 2,4-D, 0.2 mg/L KT and 0.45 mol/L glucose for 10 to 15 min. The protoplasts were fractioned into an upper and a lower layer in the centrifugal tube. Most of the protoplasts in the lower layer were smaller, round and rich in cytoplasts in which contain many granular substances. When this kind of protoplasts were cultured in the thin liquid protoplast culture medium with a density of 1 x l0s to 5 x los protoplasts/mL, the division and the callus formation of the regenerated cells were easily observed. The first divisions occurred in 3 days and small cell clusters could be seen after 2 to 3 weeks in the culture. At this moment, the addition of the protoplast culture medium with decreased osmoticum once or twice is needed for the continuous protoplasts division to form calli. Regenerated calli, 3 to 5 mm in diameter, were transferred in succession on MS medium with 2 mg/L IAA and 1 mg/L KT for the initiation of embryogenesis. The embryoids germinated on the hormonefree MS medium and a number of plantlets were obtained. It seems that using vigorous embryogenic callus and decreasing osmoticum are the two critical factors for plant regeneration of cotton protoplasts.     

Somatic hybridization in higher plants

Summary Somatic hybridization in higher plants has come into focus since methods have been established for protoplast fusion and uptake of foreign DNA and organelles by protoplasts. Polyethylene glycol (PEG) was an effective agent for inducing fusion. Treatment of protoplasts with PEG resulted in 5 to 30% heterospecific fusion products. Protoplasts of different species, genera and even families were compatible when fused. A number of protoplast combinations (soybean + corn, soybean + pea, soybean + tobacco, carrot + barley, etc.) provided fusion products which underwent cell division and callus formation. Fusion products initially were heterokaryocytes. In dividing heterokaryocytes, random distribution of mitotic nuclei was observed to be accompanied by multiple wall formation and to result in chimeral callus. Juxtaposition of mitotic nuclei suggested nuclear fusion and hybrid formation. Fusion of heterospecific interphase nuclei was demonstrated in soybean + pea and carrot + barley heterokaryons. Provided parental protoplasts carry suitable markers, the fusion products can be recognized. For the isolation and cloning of hybrid cells, fusion experiments must be supplemented with a selective system. Complementation of two nonallelic genes that prevent or inhibit growth under special culture conditions appears as the principle on which to base the selection of somatic hybrids. As protoplasts of some species have been induced to regenerate entire plants, the development of hybrid plants from protoplast fusion products is feasible and has already been demonstrated for tobacco. Presented in the formal symposium on Somatic Cell Genetics at the 27th Annual Meeting of the Tissue Culture Association, Philadelphia, Pennsylvania, June 7–10, 1976.