Enhancing Antibody Fc Heterodimer Formation through Electrostatic Steering Effects: APPLICATIONS TO BISPECIFIC MOLECULES AND MONOVALENT IgG

Naturally occurring IgG antibodies are bivalent and monospecific. Bispecific antibodies having binding specificities for two different antigens can be produced using recombinant technologies and are projected to have broad clinical applications. However, co-expression of multiple light and heavy chains often leads to contaminants and pose purification challenges. In this work, we have modified the CH3 domain interface of the antibody Fc region with selected mutations so that the engineered Fc proteins preferentially form heterodimers. These novel mutations create altered charge polarity across the Fc dimer interface such that coexpression of electrostatically matched Fc chains support favorable attractive interactions thereby promoting desired Fc heterodimer formation, whereas unfavorable repulsive charge interactions suppress unwanted Fc homodimer formation. This new Fc heterodimer format was used to produce bispecific single chain antibody fusions and monovalent IgGs with minimal homodimer contaminants. The strategy proposed here demonstrates the feasibility of robust production of novel Fc-based heterodimeric molecules and hence broadens the scope of bispecific molecules for therapeutic applications.     

Optimizing assembly and production of native bispecific antibodies by codon de-optimization

When production of bispecific antibodies requires the co-expression and assembly of three or four polypeptide chains, low expression of one chain can significantly limit assembly and yield. κλ bodies, fully human bispecific antibodies with native IgG structure, are composed of a common heavy chain and two different light chains, one kappa and one lambda. No engineering is applied to force pairing of the chains, thus both monospecific and bispecific antibodies are secreted in the supernatant. In this context, stoichiometric expression of the two light chains allows for maximal assembly of the bispecific antibody. In this study, we selected a κλ body with suboptimal characteristics due to low kappa chain expression. Codon optimization to increase expression of the kappa chain did not improve bispecific yield. Surprisingly, progressive introduction of non-optimal codons into the sequence of the lambda chain resulted in lowering its expression for an optimal tuning of the relative distribution of monospecific and bispecific antibodies. This codon de-optimization led to doubling of the κλ body yield. These results indicate that assembly of different proteins into a recombinant complex is an interconnected process and that reducing the expression of one polypeptide can actually increase the overall yield.     

Guiding bispecific monovalent antibody formation through proteolysis of IgG1 single-chain

We developed an IgG1 domain-tethering approach to guide the correct assembly of 2 light and 2 heavy chains, derived from 2 different antibodies, to form bispecific monovalent antibodies in IgG1 format. We show here that assembling 2 different light and heavy chains by sequentially connecting them with protease-cleavable polypeptide linkers results in the generation of monovalent bispecific antibodies that have IgG1 sequence, structure and functional properties. This approach was used to generate a bispecific monovalent antibody targeting the epidermal growth factor receptor and the type I insulin-like growth factor receptor that: 1) can be produced and purified using standard IgG1 techniques; 2) exhibits stability and structural features comparable to IgG1; 3) binds both targets simultaneously; and 4) has potent anti-tumor activity. Our strategy provides new engineering opportunities for bispecific antibody applications, and, most importantly, overcomes some of the limitations (e.g., half-antibody and homodimer formation, light chains mispairing, multi-step purification), inherent with some of the previously described IgG1-based bispecific monovalent antibodies.     

XGFR*, a novel affinity-matured bispecific antibody targeting IGF-1R and EGFR with combined signaling inhibition and enhanced immune activation for the treatment of pancreatic cancer

The epidermal growth factor receptor (EGFR) and the insulin-like growth factor-1 receptor (IGF-1R) play critical roles in tumor growth, providing a strong rationale for the combined inhibition of IGF-1R and EGFR signaling in cancer therapy. We describe the design, affinity maturation, in vitro and in vivo characterization of the bispecific anti-IGF-1R/EGFR antibody XGFR*. XGFR* is based on the bispecific IgG antibody XGFR, which enabled heterodimerization of an IGF-1R binding scFab heavy chain with an EGFR-binding light and heavy chain by the “knobs-into-holes” technology. XGFR* is optimized for monovalent binding of human EGFR and IGF-1R with increased binding affinity for IGF-1R due to affinity maturation and highly improved protein stability to oxidative and thermal stress. It bears an afucosylated Fc-portion for optimal induction of antibody-dependent cell-mediated cytotoxicity (ADCC). Stable Chinese hamster ovary cell clones with production yields of 2–3 g/L were generated, allowing for large scale production of the bispecific antibody. XGFR* potently inhibits EGFR- and IGF-1R-dependent receptor phosphorylation, reduces tumor cell proliferation in cells with heterogeneous levels of IGF-1R and EGFR receptor expression and induces strong ADCC in vitro. A comparison of pancreatic and colorectal cancer lines demonstrated superior responsiveness to XGFR*-mediated signaling and tumor growth inhibition in pancreatic cancers that frequently show a high degree of IGF-1R/EGFR co-expression. XGFR* showed potent anti-tumoral efficacy in the orthotopic MiaPaCa-2 pancreatic xenograft model, resulting in nearly complete tumor growth inhibition with significant number of tumor remissions. In summary, the bispecific anti-IGF-1R/EGFR antibody XGFR* combines potent signaling and tumor growth inhibition with enhanced ADCC induction and represents a clinical development candidate for the treatment of pancreatic cancer.     

LC-MS characterization and purity assessment of a prototype bispecific antibody

Bispecific IgG asymmetric (heterodimeric) antibodies offer enhanced therapeutic efficacy, but present unique challenges for drug development. These challenges are related to the proper assembly of heavy and light chains. Impurities such as symmetric (homodimeric) antibodies can arise with improper assembly. A new method to assess heterodimer purity of such bispecific antibody products is needed because traditional separation-based purity assays are unable to separate or quantify homodimer impurities. This paper presents a liquid chromatography-mass spectrometry (LC-MS)-based method for evaluating heterodimeric purity of a prototype asymmetric antibody containing two different heavy chains and two identical light chains. The heterodimer and independently expressed homodimeric standards were characterized by two complementary LC-MS techniques: Intact protein mass measurement of deglycosylated antibody and peptide map analyses. Intact protein mass analysis was used to check molecular integrity and composition. LC-MS^E peptide mapping of Lys-C digests was used to verify protein sequences and characterize post-translational modifications, including C-terminal truncation species. Guided by the characterization results, a heterodimer purity assay was demonstrated by intact protein mass analysis of pure deglycosylated heterodimer spiked with each deglycosylated homodimeric standard. The assay was capable of detecting low levels (2%) of spiked homodimers in conjunction with co-eluting half antibodies and multiple mass species present in the homodimer standards and providing relative purity differences between samples. Detection of minor homodimer and half-antibody C-terminal truncation species at levels as low as 0.6% demonstrates the sensitivity of the method. This method is suitable for purity assessment of heterodimer samples during process and purification development of bispecific antibodies, e.g., clone selection.     

Tailoring translational strength using Kozak sequence variants improves bispecific antibody assembly and reduces product-related impurities in CHO cells

Optimal production of bispecific antibodies (bsAb) requires efficient and tailored co-expression and assembly of two distinct heavy and two distinct light chains. Here, we describe a novel technology to modulate the translational strength of antibody chains via Kozak sequence variants to produce bsAb in a single cell line. In this study, we designed and screened a large Kozak sequence library to identify 10 independent variants that can modulate protein expression levels from approximately 0.2 to 1.3-fold compared with the wild-type sequence in transient transfection. We used a combination of several of these variants, covering a wide range of translational strength, to develop stable single cell Chinese hamster ovary bispecific cell lines and compared the results with those obtained from the wild-type sequence. A significant increase in bispecific antibody assembly with a concomitant reduction in the level of product-related impurities was observed. Our findings suggest that for production of bsAb it can be advantageous to modify translational strength for selected protein chains to improve overall yield and product quality. By extension, tuning of translational strength can also be applied to improving the production of a wide variety of heterologous proteins.     

Efficient production of bispecific IgG of different isotypes and species of origin in single mammalian cells

Bispecific IgG production in single host cells has been a much sought-after goal to support the clinical development of these complex molecules. Current routes to single cell production of bispecific IgG include engineering heavy chains for heterodimerization and redesign of Fab arms for selective pairing of cognate heavy and light chains. Here, we describe novel designs to facilitate selective Fab arm assembly in conjunction with previously described knobs-into-holes mutations for preferential heavy chain heterodimerization. The top Fab designs for selective pairing, namely variants v10 and v11, support near quantitative assembly of bispecific IgG in single cells for multiple different antibody pairs as judged by high-resolution mass spectrometry. Single-cell and in vitro-assembled bispecific IgG have comparable physical, in vitro biological and in vivo pharmacokinetics properties. Efficient single-cell production of bispecific IgG was demonstrated for human IgG₁, IgG₂ and IgG₄ thereby allowing the heavy chain isotype to be tailored for specific therapeutic applications. Additionally, a reverse chimeric bispecific IgG_2a with humanized variable domains and mouse constant domains was generated for preclinical proof-of-concept studies in mice. Efficient production of a bispecific IgG in stably transfected mammalian (CHO) cells was shown. Individual clones with stable titer and bispecific IgG composition for >120 days were readily identified. Such long-term cell line stability is needed for commercial manufacture of bispecific IgG. The single-cell bispecific IgG designs developed here may be broadly applicable to biotechnology research, including screening bispecific IgG panels, and to support clinical development.     

A Novel Glycoengineered Bispecific Antibody Format for Targeted Inhibition of Epidermal Growth Factor Receptor (EGFR) and Insulin-like Growth Factor Receptor Type I (IGF-1R) Demonstrating Unique Molecular Properties

In the present study, we have developed a novel one-arm single chain Fab heterodimeric bispecific IgG (OAscFab-IgG) antibody format targeting the insulin-like growth factor receptor type I (IGF-1R) and the epidermal growth factor receptor (EGFR) with one binding site for each target antigen. The bispecific antibody XGFR is based on the “knob-into-hole” technology for heavy chain heterodimerization with one heavy chain consisting of a single chain Fab to prevent wrong pairing of light chains. XGFR was produced with high expression yields and showed simultaneous binding to IGF-1R and EGFR with high affinity. Due to monovalent binding of XGFR to IGF-1R, IGF-1R internalization was strongly reduced compared with the bivalent parental antibody, leading to enhanced Fc-mediated cellular cytotoxicity. To further increase immune effector functions triggered by XGFR, the Fc portion of the bispecific antibody was glycoengineered, which resulted in strong antibody-dependent cell-mediated cytotoxicity activity. XGFR-mediated inhibition of IGF-1R and EGFR phosphorylation as well as A549 tumor cell proliferation was highly effective and was comparable with a combined treatment with EGFR (GA201) and IGF-1R (R1507) antibodies. XGFR also demonstrated potent anti-tumor efficacy in multiple mouse xenograft tumor models with a complete growth inhibition of AsPC1 human pancreatic tumors and improved survival of SCID beige mice carrying A549 human lung tumors compared with treatment with antibodies targeting either IGF-1R or EGFR. In summary, we have applied rational antibody engineering technology to develop a heterodimeric OAscFab-IgG bispecific antibody, which combines potent signaling inhibition with antibody-dependent cell-mediated cytotoxicity induction and results in superior molecular properties over two established tetravalent bispecific formats.     

EFab domain substitution as a solution to the light-chain pairing problem of bispecific antibodies

ABSTRACT

Bispecific antibody therapeutics can expand the functionality of a conventional monoclonal antibody drug because they can bind multiple antigens. However, their great potential is counterbalanced by the challenges faced in their production. The classic asymmetric bispecific containing an Fc requires the expression of four unique chains – two light chains and two heavy chains; each light chain must pair with its correct heavy chain, which then must heterodimerize to form the full bispecific. The light-chain pairing problem has several solutions, some of which require engineering and optimization for each bispecific pair. Here, we introduce a technology called EFab Domain Substitution, which replaces the Cε2 of IgE for one of the CL/CH1 domains into one arm of an asymmetric bispecific to encourage the correct pairing of the light chains. EFab Domain Substitution provides very robust correct pairing while maintaining antibody function and is effective for many variable domains. We report its effect on the biophysical properties of an antibody and the crystal structure of the EFab domain substituted into the adalimumab Fab (PDB ID 6CR1).     

Improving target cell specificity using a novel monovalent bispecific IgG design

Monovalent bispecific IgGs cater to a distinct set of mechanisms of action but are difficult to engineer and manufacture because of complexities associated with correct heavy and light chain pairing. We have created a novel design, “DuetMab,” for efficient production of these molecules. The platform uses knobs-into-holes (KIH) technology for heterodimerization of 2 distinct heavy chains and increases the efficiency of cognate heavy and light chain pairing by replacing the native disulfide bond in one of the C_H1-C_L interfaces with an engineered disulfide bond. Using two pairs of antibodies, cetuximab (anti-EGFR) and trastuzumab (anti-HER2), and anti-CD40 and anti-CD70 antibodies, we demonstrate that DuetMab antibodies can be produced in a highly purified and active form, and show for the first time that monovalent bispecific IgGs can concurrently bind both antigens on the same cell. This last property compensates for the loss of avidity brought about by monovalency and improves selectivity toward the target cell.     

In vitro galactosylation of human IgG at 1 kg scale using recombinant galactosyltransferase

The Fc effector functions of immunoglobulin G (IgG) antibodies are in part determined by structural features of carbohydrates linked to each of the paired gamma heavy chains in the antibody constant domain (C(H)2). One glycoform that has been shown to be advantageous is G2, where both arms of complex bi-antennary N-glycans terminate in galactose. In vitro treatment with glycosyltransferases can remodel heterogeneous IgG glycoforms, enabling preparation of IgG molecules with homogeneous glycan chains. Here we describe optimization of conditions for use of a soluble recombinant galactosyltransferase in vitro to remodel glycans of human serum IgG, and we demonstrate a scaled-up reaction in which >98% of neutral glycans attached to 1 kg IgG are converted to the G2 glycoform. Removal of glycosylation reagents from the product is achieved in one step by affinity chromatography on immobilized Protein A.     

Using bispecific antibodies in forced degradation studies to analyze the structure–function relationships of symmetrically and asymmetrically modified antibodies

ABSTRACT

Forced degradation experiments of monoclonal antibodies (mAbs) aid in the identification of critical quality attributes (CQAs) by studying the impact of post-translational modifications (PTMs), such as oxidation, deamidation, glycation, and isomerization, on biological functions. Structure-function characterization of mAbs can be used to identify the PTM CQAs and develop appropriate analytical and process controls. However, the interpretation of forced degradation results can be complicated because samples may contain mixtures of asymmetrically and symmetrically modified mAbs with one or two modified chains. We present a process to selectively create symmetrically and asymmetrically modified antibodies for structure-function characterization using the bispecific DuoBody® platform. Parental molecules mAb1 and mAb2 were first stressed with peracetic acid to induce methionine oxidation. Bispecific antibodies were then prepared from a mixture of oxidized or unoxidized parental mAbs by a controlled Fab-arm exchange process. This process was used to systematically prepare four bispecific mAb products: symmetrically unoxidized, symmetrically oxidized, and both combinations of asymmetrically oxidized bispecific mAbs. Results of this study demonstrated chain-independent, 1:2 stoichiometric binding of the mAb Fc region to both FcRn receptor and to Protein A. The approach was also applied to create asymmetrically deamidated mAbs at the asparagine 330 residue. Results of this study support the proposed 1:1 stoichiometric binding relationship between the FcγRIIIa receptor and the mAb Fc. This approach should be generally applicable to study the potential impact of any modification on biological function.     

Precise quantification of mixtures of bispecific IgG produced in single host cells by liquid chromatography-Orbitrap high-resolution mass spectrometry

Bispecific IgG are heterotetramers comprising 2 pairs of heavy and light chains. Co-expression of the 4 component chains in a single host cell typically yields the desired bispecific IgG plus up to 9 additional incorrect chain pairings. Several protein engineering strategies have been reported to facilitate the heterodimerization of antibody heavy chains or cognate pairing of antibody heavy and light chains. These technologies have been used to direct the efficient assembly of bispecific IgG in single host cells and minimize unwanted chain pairings. When purifying bispecific IgGs, the identification and quantification of low levels of closely related IgG contaminants are substantial analytical challenges. Here we have developed a robust high-throughput method for quantitative analysis of bispecific IgG preparations using novel online liquid chromatography in conjunction with an extended mass range Orbitrap-based high-resolution mass spectrometer. A mathematical method was developed to estimate the yields of the 2 isobaric species, namely the desired bispecific IgG and the light chain-scrambled IgG. The analytical methods described herein are anticipated to be broadly applicable to the development of bispecific IgG as drugs and potentially to other complex next-generation biotherapeutics.     

Improving biophysical properties of a bispecific antibody scaffold to aid developability

While the concept of Quality-by-Design is addressed at the upstream and downstream process development stages, we questioned whether there are advantages to addressing the issues of biologics quality early in the design of the molecule based on fundamental biophysical characterization, and thereby reduce complexities in the product development stages. Although limited number of bispecific therapeutics are in clinic, these developments have been plagued with difficulty in producing materials of sufficient quality and quantity for both preclinical and clinical studies. The engineered heterodimeric Fc is an industry-wide favorite scaffold for the design of bispecific protein therapeutics because of its structural, and potentially pharmacokinetic, similarity to the natural antibody. Development of molecules based on this concept, however, is challenged by the presence of potential homodimer contamination and stability loss relative to the natural Fc. We engineered a heterodimeric Fc with high heterodimeric specificity that also retains natural Fc-like biophysical properties, and demonstrate here that use of engineered Fc domains that mirror the natural system translates into an efficient and robust upstream stable cell line selection process as a first step toward a more developable therapeutic.     

Heavy and light chain pairing of bivalent quadroma and knobs-into-holes antibodies analyzed by UHR-ESI-QTOF mass spectrometry

The quadroma antibody represents the first attempt to produce a bispecific heterodimeric IgG antibody by somatic fusion of 2 hybridoma cells each expressing monoclonal antibodies with distinctive specificities. However, because of random heavy and light chain pairing, the desired functional bispecific antibody represents only a small fraction of the protein produced. Subsequently, the knobs-into-holes (KiH) approach was developed to enforce correct heavy chain heterodimerization. Assuming equimolar expression of 4 unmodified chains comprising 2 heavy and 2 light chains, the statistical distribution of all paired combinations can be calculated. With equimolar expression as the goal, we transfected HEK cells with 1:1:1:1 plasmid ratios and analyzed the protein A affinity-purified antibodies from the quadroma and KiH approaches qualitatively and quantitatively with regard to the estimated relative amounts of the products using electrospray quadrupole time-of-flight mass spectrometry. Our results show that all expected species are formed, and that, within the methodological limits, the species distribution in the mixtures corresponds approximately to the statistical distribution.     

Protein design of IgG/TCR chimeras for the co-expression of Fab-like moieties within bispecific antibodies

Immunoglobulins and T cell receptors (TCRs) share common sequences and structures. With the goal of creating novel bispecific antibodies (BsAbs), we generated chimeric molecules, denoted IgG_TCRs, where the Fv regions of several antibodies were fused to the constant domains of the α/β TCR. Replacing C_H1 with Cα and C_L with Cβ, respectively, was essential for achieving at least partial heavy chain/light chain assembly. Further optimization of the linker regions between the variable and constant domains, as well as replacement of the large FG loop of Cβ with a canonical β-turn, was necessary to consistently obtain full heavy chain/light chain assembly. The optimized IgG_TCR molecules were evaluated biophysically and shown to maintain the binding properties of their parental antibodies. A few BsAbs were generated by co-expressing native Fabs and IgG_TCR Fabs within the same molecular construct. We demonstrate that the IgG_TCR designs steered each of the light chains within the constructs to specifically pair with their cognate heavy chain counterparts. We did find that even with complete constant domain specificity between the C_H1/C_L and Cα/Cβ domains of the Fabs, strong variable domain interactions can dominate the pairing specificity and induce some mispairing. Overall, the IgG_TCR designs described here are a first step toward the generation of novel BsAbs that may be directed toward the treatment of multi-faceted and complex diseases.     

Methionine oxidation in human IgG2 Fc decreases binding affinities to protein A and FcRn

Susceptibility of methionine residues to oxidation is a significant issue of protein therapeutics. Methionine oxidation may limit the product's clinical efficacy or stability. We have studied kinetics of methionine oxidation in the Fc portion of the human IgG2 and its impact on the interaction with FcRn and Protein A. Our results confirm previously published observations for IgG1 that two analogous solvent‐exposed methionine residues in IgG2, Met 252 and Met 428, oxidize more readily than the other methionine residue, Met 358, which is buried inside the Fc. Met 397, which is not present in IgG1 but in IgG2, oxidizes at similar rate as Met 358. Oxidation of two labile methionines, Met 252 and Met 428, weakens the binding of the intact antibody with Protein A and FcRn, two natural protein binding partners. Both of these binding partners share the same binding site on the Fc. Additionally, our results shows that Protein A may serve as a convenient and inexpensive surrogate for FcRn binding measurements.     

Low density lipoprotein receptor-related protein and factor IXa share structural requirements for binding to the A3 domain of coagulation factor VIII

Low-density lipoprotein receptor-related protein (LRP) is an endocytic receptor that binds multiple distinct ligands, including blood coagulation factor VIII (FVIII). FVIII is a heterodimeric multidomain protein that consists of a heavy chain (domains A1, a1, A2, a2, and B) and a light chain (domains a3, A3, C1, and C2). Both chains contribute to high-affinity interaction with LRP. One LRP-interactive region has previously been located in the C2 domain, but its affinity is low in comparison with that of the entire FVIII light chain. We now have compared a variety of FVIII light chain derivatives with the light chain of its homolog FVa for LRP binding. In surface plasmon resonance studies employing LRP cluster II, the FVa and FVIII light chains proved different in that only FVIII displayed high-affinity binding. Because the FVIII a3-A3-C1 fragment was effective in associating with LRP, this region was explored for structural elements that are exposed but not conserved in FV. Competition studies using synthetic peptides suggested that LRP binding involves the FVIII-specific region Lys(1804)-Ala(1834) in the A3 domain. In line with this observation, LRP binding was inhibited by a recombinant antibody fragment that specifically binds to the FVIII sequence Glu(1811)-Lys(1818). The role of this sequence in LRP binding was further tested using a FVIII/FV chimera in which sequence Glu(1811)-Lys(1818) was replaced with the corresponding sequence of FV. Although this chimera still displayed residual binding to LRP cluster II, its affinity was reduced. This suggests that multiple sites in FVIII contribute to high-affinity LRP binding, one of which is the FVIII A3 domain region Glu(1811)-Lys(1818). This suggests that LRP binding to the FVIII A3 domain involves the same structural elements that also contribute to the assembly of FVIII with FIXa.     

Development of a bispecific monoclonal antibody against a gallium-67 chelate and the human melanoma-associated antigen p97 for potential use in pretargeted immunoscintigraphy

A bispecific monoclonal antibody (bsmAb) has been developed against the human melanoma-associated antigen p97 and an octahedral gallium chelate (Ga-HBED) using the hybrid hybridoma technology. As tetradomas were expected to produce a maximum of ten different molecular species of immunoglobulins, the bispecific antibody was purified from this mixture by consecutive protein A affinity and cation-exchange chromatographic techniques. Although it was established by sodium dodecyl sulphate/polyacrylamide gel electrophoresis that the heavy (H) and light (L) chains of the two parental immunoglobulins were mismatched in the bispecific antibody, results from cell enzyme-linked immunosorbent assay indicated significant dual specific binding to both the melanoma cells and⁶⁷Ga-HBED. Other in vitro techniques further confirmed that the bsmAb Bi 5-56-II-17 still retained about 30%–40% simultaneous binding capacity to both the antigens, as would have been expected in a bsmAb that has ideally matched H and L chains. Preliminary in vivo experiments using nude mice bearing the human melanoma xenografts showed that the bsmAb Bi 5-56-II-17 was able to target the radioactive gallium chelate to the tumours twice as efficiently compared to the monospecific, bivalent gallium chelate antibody.     

双特异性抗体副产物去除策略

双特异性抗体是一种可以同时结合两种靶点的抗体,与单特异性抗体相比具有疗效高、毒副作用小的优点,因此成为近年来的研究热点。但双特异性抗体是由两种不同的重链和轻链所组成,而且重、轻链的表达难以控制在同一水平,因此在双特异性抗体的组装过程中极易出现各种错配副产物,大大增加了下游纯化的难度与成本。近年来,多家制药公司研发出商业化的双特异性抗体制备平台,这些平台利用独特的分子设计策略极大提升了双特异性抗体的组装成功率。然而,各种双抗分子设计策略不足以完全避免副产物的产生,因此还需要配合各种层析方式来进一步去除双抗分子副产物以提升产品质量。综述了近年来几种主流双特异性抗体研发设计平台,系统归纳了用于去除同源二聚体、半抗体、3/4抗体及聚集体的层析方法,以期为双特异性抗体纯化提供理论依据。