The formation of the rodlet layer of streptomycetes is the result of the interplay between rodlins and chaplins

Streptomycetes form hydrophobic aerial hyphae that eventually septate into hydrophobic spores. Both aerial hyphae and spores possess a typical surface layer called the rodlet layer. We present here evidence that rodlet formation is conserved in the streptomycetes. The formation of the rodlet layer is the result of the interplay between rodlins and chaplins. A strain of Streptomyces coelicolor in which the rodlin genes rdlA and/or rdlB were deleted no longer formed the rodlet layer. Instead, these surfaces were decorated with fine fibrils. Deletion of all eight chaplin genes (strain DeltachpABCDEFGH) resulted in the absence of the rodlet layer as well as the fibrils at surfaces of aerial hyphae and spores. Apart from coating these surfaces, chaplins are involved in the escape of hyphae into the air, as was shown by the strong reduction in the number of aerial hyphae in the DeltachpABCDEFGH strain. The decrease in the number of aerial hyphae correlated with a lower expression of the rdl genes in the colony. Yet, expression per aerial hypha was similar to that in the wild-type strain, indicating that expression of the rdl genes is initiated after the hypha has sensed that it has grown into the air.     

Aerial development in Streptomyces coelicolor requires sortase activity

Streptomyces coelicolor is a multicellular bacterium whose life cycle encompasses three differentiated states: vegetative hyphae, aerial hyphae and spores. Among the factors required for aerial development are the 'chaplins', a family of eight secreted proteins that coat the surface of aerial hyphae. Three chaplins (the 'long' chaplins, ChpA, B and C) possess an LAXTG-containing C-terminal sorting signal and are predicted sortase substrates. The five remaining 'short' chaplins are presumed to be associated with the cell surface through interactions with the long chaplins. We show here that two sortase enzymes, SrtE1 and SrtE2, cleave LAXTG-containing peptides at two distinct positions in vitro, and are required for cell wall anchoring of ChpC in vivo. srtE1/E2 double mutants are delayed in aerial hyphae formation, do not sporulate and fail to display all short chaplins on their aerial surfaces. Surprisingly, these mutant characteristics were not shared by a long chaplin mutant, which exhibited only modest delays in aerial development, leading us to revise the current model of chaplin-mediated aerial development. The sortase mutant phenotype, instead, appears to stem from an inability to transcribe aerial hyphae-specific genes, whose products have diverse functions. This suggests that sortase activity triggers an important, and previously unknown, developmental checkpoint.     

Attachment of Streptomyces coelicolor is mediated by amyloidal fimbriae that are anchored to the cell surface via cellulose

The chaplin proteins ChpA-H enable the filamentous bacterium Streptomyces coelicolor to form reproductive aerial structures by assembling into surface-active amyloid-like fibrils. We here demonstrate that chaplins also mediate attachment of S. coelicolor to surfaces. Attachment coincides with the formation of fimbriae, which are connected to the cell surface via spike-shaped protrusions. Mass spectrometry, electron microscopy and Congo red treatment showed that these fimbriae are composed of bundled amyloid fibrils of chaplins. Attachment and fimbriae formation were abolished in a strain in which the chaplin genes chpA–H were inactivated. Instead, very thin fibrils emerged from the spike-shaped protrusions in this mutant. These fibrils were susceptible to cellulase treatment. This enzymatic treatment also released wild-type fimbriae from the cell surface, thereby abolishing attachment. The reduced attachment of a strain in which the gene of a predicted cellulose synthase was inactivated also indicates a role of cellulose in surface attachment. We propose that the mechanism of attachment via cellulose-anchored amyloidal fimbriae is widespread in bacteria and may function in initiation of infection and in formation of biofilms.     

The assembly of individual chaplin peptides from Streptomyces coelicolor into functional amyloid fibrils

The self-association of proteins into amyloid fibrils offers an alternative to the natively folded state of many polypeptides. Although commonly associated with disease, amyloid fibrils represent the natural functional state of some proteins, such as the chaplins from the soil-dwelling bacterium Streptomyces coelicolor, which coat the aerial mycelium and spores rendering them hydrophobic. We have undertaken a biophysical characterisation of the five short chaplin peptides ChpD-H to probe the mechanism by which these peptides self-assemble in solution to form fibrils. Each of the five chaplin peptides produced synthetically or isolated from the cell wall is individually surface-active and capable of forming fibrils under a range of solution conditions in vitro. These fibrils contain a highly similar cross-β core structure and a secondary structure that resembles fibrils formed in vivo on the spore and mycelium surface. They can also restore the growth of aerial hyphae to a chaplin mutant strain. We show that cysteine residues are not required for fibril formation in vitro and propose a role for the cysteine residues conserved in four of the five short chaplin peptides.     

SapB and the chaplins: connections between morphogenetic proteins in Streptomyces coelicolor

Morphogenesis in the streptomycetes features the differentiation of substrate-associated vegetative hyphae into upwardly growing aerial filaments. This transition requires the activity of bld genes and the secretion of biosurfactants that reduce the surface tension at the colony-air interface enabling the emergence of nascent aerial hyphae. Streptomyces coelicolor produces two classes of surface-active molecules, SapB and the chaplins. While both molecules are important for aerial development, nothing is known about the functional redundancy or interaction of these surfactants apart from the observation that aerial hyphae formation can proceed via one of two pathways: a SapB-dependent pathway when cells are grown on rich medium and a SapB-independent pathway on poorly utilized carbon sources such as mannitol. We used mutant analysis to show that while the chaplins are important, but not required, for development on rich medium, they are essential for differentiation on MS (soy flour mannitol) medium, and the corresponding developmental defects could be suppressed by the presence of SapB. Furthermore, the chaplins are produced by conditional bld mutants during aerial hyphae formation when grown on the permissive medium, MS, suggesting that the previously uncharacterized SapB-independent pathway is chaplin dependent. In contrast, a bld mutant blocked in aerial morphogenesis on all media makes neither SapB nor chaplins. Finally, we show that a constructed null mutant that lacks all chaplin and SapB biosynthetic genes fails to differentiate in any growth condition. We propose that the biosurfactant activities of both SapB and the chaplins are essential for normal aerial hyphae formation on rich medium, while chaplin biosynthesis and secretion alone drives aerial morphogenesis on MS medium.     

Two novel homologous proteins of Streptomyces coelicolor and Streptomyces lividans are involved in the formation of the rodlet layer and mediate attachment to a hydrophobic surface

The filamentous bacteria Streptomyces coelicolor and Streptomyces lividans exhibit a complex life cycle. After a branched submerged mycelium has been established, aerial hyphae are formed that may septate to form chains of spores. The aerial structures possess several surface layers of unknown nature that make them hydrophobic, one of which is the rodlet layer. We have identified two homologous proteins, RdlA and RdlB, that are involved in the formation of the rodlet layer in both streptomycetes. The rdl genes are expressed in growing aerial hyphae but not in spores. Immunolocalization showed that RdlA and RdlB are present at surfaces of aerial structures, where they form a highly insoluble layer. Disruption of both rdlA and rdlB in S. coelicolor and S. lividans (DeltardlAB strains) did not affect the formation and differentiation of aerial hyphae. However, the characteristic rodlet layer was absent. Genes rdlA and rdlB were also expressed in submerged hyphae that were in contact with a hydrophobic solid. Attachment to this substratum was greatly reduced in the DeltardlAB strains. Sequences homologous to rdlA and rdlB occur in a number of streptomycetes representing the phylogenetic diversity of this group of bacteria, indicating a general role for these proteins in rodlet formation and attachment.     

The Cys3-Cys4 loop of the hydrophobin EAS is not required for rodlet formation and surface activity

Class I hydrophobins are fungal proteins that self-assemble into robust amphipathic rodlet monolayers on the surface of aerial structures such as spores and fruiting bodies. These layers share many structural characteristics with amyloid fibrils and belong to the growing family of functional amyloid-like materials produced by microorganisms. Although the three-dimensional structure of the soluble monomeric form of a class I hydrophobin has been determined, little is known about the molecular structure of the rodlets or their assembly mechanism. Several models have been proposed, some of which suggest that the Cys3-Cys4 loop has a critical role in the initiation of assembly or in the polymeric structure. In order to provide insight into the relationship between hydrophobin sequence and rodlet assembly, we investigated the role of the Cys3-Cys4 loop in EAS, a class I hydrophobin from Neurospora crassa. Remarkably, deletion of up to 15 residues from this 25-residue loop does not impair rodlet formation or reduce the surface activity of the protein, and the physicochemical properties of rodlets formed by this mutant are indistinguishable from those of its full-length counterpart. In addition, the core structure of the truncation mutant is essentially unchanged. Molecular dynamics simulations carried out on the full-length protein and this truncation mutant binding to an air-water interface show that, although it is hydrophobic, the loop does not play a role in positioning the protein at the surface. These results demonstrate that the Cys3-Cys4 loop does not have an integral role in the formation or structure of the rodlets and that the major determinant of the unique properties of these proteins is the amphipathic core structure, which is likely to be preserved in all hydrophobins despite the high degree of sequence variation across the family.     

Aerial morphogenesis: enter the chaplins

Filamentous bacteria produce aerial structures to allow spores to be dispersed. A new class of secreted, surface-active proteins called chaplins has been identified in Streptomyces coelicolor. Chaplins form unusual amyloid-like fibrils and act cooperatively to bring about aerial development.     

Characteristics of Streptomyces coelicolor A3(2) aerial spore rodlet mosaic

Cytochemical analysis of Streptomyces coelicolor (A3(2) indicated that the aerial growth rodlet mosaic is a polysaccharide. Statistical analysis of frequency distributions of individual rodlet lengths from control and ether-reoriented spore mosaics indicated that the rodlet fibrillar image is the result of individual particulates, rather than evaginations in a continuous sheet of material. A model of the mature sport envelope was developed from freeze-etch-replicated, thin-sectioned, and critical point dried S. coelicolor A3(2) mature spores. The rodlet mosaic was situated between the outer spore wall and an external granuloma matrix. Mixture spore envelope layers from the inner surface to the external surface are plasma membrane, inner spore wall, outer spore wall, rodlet mosaic, an undefined granular matrix, and the sheath. The granular matrix had an uneven thickness and much of the matrix was frequently absent from the interspore spaces of mature spore chains. Streptomyces coelicolor A3(2) mosaic rodlets were isolated by acetic acid refluxing, then ethanol precipitation. Complete acid hydrolysis of rodlets released on sugar which cochromatographed with D-glucosamine-HCl and released acetic acid at 139% of the expected level. Cell associated rodlet mosaics and isolated mosaic rodlets were hydrolyzed with chitinase. Infrared spectra of isolated rodlets were similar to crab chitin spectra.     

CabC, an EF-hand calcium-binding protein, is involved in Ca2+-mediated regulation of spore germination and aerial hypha formation in Streptomyces coelicolor

Ca(2+) was reported to regulate spore germination and aerial hypha formation in streptomycetes; the underlying mechanism of this regulation is not known. cabC, a gene encoding an EF-hand calcium-binding protein, was disrupted or overexpressed in Streptomyces coelicolor M145. On R5- agar, the disruption of cabC resulted in denser aerial hyphae with more short branches, swollen hyphal tips, and early-germinating spores on the spore chain, while cabC overexpression significantly delayed development. Manipulation of the Ca(2+) concentration in R5- agar could reverse the phenotypes of cabC disruption or overexpression mutants and mimic mutant phenotypes with M145, suggesting that the mutant phenotypes were due to changes in the intracellular Ca(2+) concentration. CabC expression was strongly activated in aerial hyphae, as determined by Western blotting against CabC and confocal laser scanning microscopy detection of CabC::enhanced green fluorescent protein (EGFP). CabC::EGFP fusion proteins were evenly distributed in substrate mycelia, aerial mycelia, and spores. Taken together, these results demonstrate that CabC is involved in Ca(2+)-mediated regulation of spore germination and aerial hypha formation in S. coelicolor. CabC most likely acts as a Ca(2+) buffer and exerts its regulatory effects by controlling the intracellular Ca(2+) concentration.     

SapB and the rodlins are required for development of Streptomyces coelicolor in high osmolarity media

Streptomyces coelicolor produces spore-forming aerial hyphae after a period of vegetative growth. These aerial structures are decorated with a hydrophobic coating of rodlets consisting of chaplins and rodlins. Here, we show that rodlins and the surface-active peptide SapB are essential for development during growth in a medium with high osmolarity. To this end, both vegetative and aerial hyphae secrete SapB, whereas rodlins are only secreted by the spore-forming aerial hyphae.     

Surface modification using interfacial assembly of the Streptomyces chaplin proteins

The chaplin proteins are instrumental in the formation of reproductive aerial structures by the filamentous bacterium Streptomyces coelicolor. They lower the water surface tension thereby enabling aerial growth. In addition, chaplins provide surface hydrophobicity to the aerial hyphae by assembling on the cell surface into an amphipathic layer of amyloid fibrils. We here show that mixtures of cell wall-extracted chaplins can be used to modify a variety of hydrophilic and hydrophobic surfaces in vitro thereby changing their nature. Assembly on glass leads to a protein coating that makes the surface hydrophobic. Conversely, the assembly of chaplins on hydrophobic surfaces renders them hydrophilic. Furthermore, we show that chaplins can stabilize emulsions of oil into water and have an unprecedented surface activity at high pH. Interestingly, this high surface activity coincides with the interfacial assembly of chaplins into a semi-liquid membrane, as opposed to the rigid membrane formed at neutral pH. This semi-liquid membrane possibly represents a trapped intermediate in the assembly process towards the more rigid amyloidal conformation. Taken together, our data shows that chaplins are suitable candidate proteins for a wide range of biotechnological applications.     

The rpoZ gene,encoding the RNA polymerase omega subunit,is required for antibiotic production and morphological differentiation in Streptomyces kasugaensis

The occurrence of pleiotropic mutants that are defective in both antibiotic production and aerial mycelium formation is peculiar to streptomycetes. Pleiotropic mutant KSB was isolated from wild-type Streptomyces kasugaensis A1R6, which produces kasugamycin, an antifungal aminoglycoside antibiotic. A 9.3-kb DNA fragment was cloned from the chromosomal DNA of strain A1R6 by complementary restoration of kasugamycin production and aerial hypha formation to mutant KSB. Complementation experiments with deletion plasmids and subsequent DNA analysis indicated that orf5, encoding 90 amino acids, was responsible for the restoration. A protein homology search revealed that orf5 was a homolog of rpoZ, the gene that is known to encode RNA polymerase subunit omega (omega), thus leading to the conclusion that orf5 was rpoZ in S. kasugaensis. The pleiotropy of mutant KSB was attributed to a 2-bp frameshift deletion in the rpoZ region of mutant KSB, which probably resulted in a truncated, incomplete omega of 47 amino acids. Furthermore, rpoZ-disrupted mutant R6D4 obtained from strain A1R6 by insertion of Tn5 aphII into the middle of the rpoZ-coding region produced neither kasugamycin nor aerial mycelia, similar to mutant KSB. When rpoZ of S. kasugaensis and Streptomyces coelicolor, whose deduced products differed in the sixth amino acid residue, were introduced into mutant R6D4 via a plasmid, both transformants produced kasugamycin and aerial hyphae without significant differences. This study established that rpoZ is required for kasugamycin production and aerial mycelium formation in S. kasugaensis and responsible for pleiotropy.     

Regulation of Streptomyces development: reach for the sky!

Streptomyces coelicolor is characterized by a complex life cycle and serves as a model system for bacterial development. After a feeding substrate mycelium has been formed, this filamentous bacterium differentiates by forming aerial hyphae that septate into spores. The bld cascade regulates initiation of aerial growth, whereas the whi genes control spore formation. Recent findings indicate the existence of another regulatory pathway that operates after aerial hyphae have started to grow into the air, which we call the sky pathway. This pathway controls the expression of the chaplin and rodlin genes. These genes encode proteins that assemble into a rodlet layer that provides surface hydrophobicity to aerial hyphae and spores.     

ShyA, a membrane protein for proper septation of hyphae in Streptomyces

The life cycle of Streptomyces involves the formation of filamentous substrate and aerial hyphae. Following cessation of growth of an aerial hypha, multiple septation occurs at the tip to produce a chain of unigenomic spores. A gene, shyA, which influences several aspects of this growth, was isolated and partially characterized in Streptomyces coelicolor. The gene product is a representative of a well-conserved family of small actinomycete proteins. The shyA mutant sporulates normally but displays hyper septum formation and altered spore-chain morphology. Biochemical separation experiments and immunofluorescence staining demonstrated that the shyA gene product locates at cell membranes. Moreover, yeast two-hybrid screen and GST-pull-down assay showed that ShyA can interact with itself. Altogether, ShyA belongs to a new family of membrane-associated proteins which plays a role in morphological differentiation in actinomycetes.     

The product of a developmental gene, crgA, that coordinates reproductive growth in Streptomyces belongs to a novel family of small actinomycete-specific proteins

On solid media, the reproductive growth of Streptomyces involves antibiotic biosynthesis coincident with the erection of filamentous aerial hyphae. Following cessation of growth of an aerial hypha, multiple septation occurs at the tip to form a chain of unigenomic spores. A gene, crgA, that coordinates several aspects of this reproductive growth is described. The gene product is representative of a well-conserved family of small actinomycete proteins with two C-terminal hydrophobic-potential membrane-spanning segments. In Streptomyces avermitilis, crgA is required for sporulation, and inactivation of the gene abolished most sporulation septation in aerial hyphae. Disruption of the orthologous gene in Streptomyces coelicolor indicates that whereas CrgA is not essential for sporulation in this species, during growth on glucose-containing media, it influences the timing of the onset of reproductive growth, with precocious erection of aerial hyphae and antibiotic production by the mutant. Moreover, CrgA subsequently acts to inhibit sporulation septation prior to growth arrest of aerial hyphae. Overexpression of CrgA in S. coelicolor, uncoupling any nutritional and growth phase-dependent regulation, results in growth of nonseptated aerial hyphae on all media tested, consistent with a role for the protein in inhibiting sporulation septation.     

Interfacial Self-Assembly of a Fungal Hydrophobin into a Hydrophobic Rodlet Layer

The Sc3p hydrophobin of the basidiomycete Schizophyllum commune is a small hydrophobic protein (100 to 101 amino acids) containing eight cysteine residues. Large amounts of the protein are excreted into the culture medium as monomers, but in the walls of aerial hyphae, the protein is present as an SDS-insoluble complex. In this study, we show that the Sc3p hydrophobin spontaneously assembles into an SDS-insoluble protein membrane on the surface of gas bubbles or when dried down on a hydrophilic surface. Electron microscopy of the assembled hydrophobin shows a surface consisting of rodlets spaced 10 nm apart, which is similar to those rodlets seen on the surface of aerial hyphae. When the purified Sc3p hydrophobin assembles on a hydrophilic surface, a surface is exposed with high hydrophobicity, similar to that of aerial hyphae. The rodlet layer, assembled in vivo and in vitro, can be disassembled by dissolution in trifluoroacetic acid and, after removal of the acid, reassembled into a rodlet layer. We propose, therefore, that the hydrophobic rodlet layer on aerial hyphae arises by interfacial self-assembly of Sc3p hydrophobin monomers, involving noncovalent interactions only. Submerged hyphae merely excrete monomers because these hyphae are not exposed to a water-air interface. The generally observed rodlet layers on fungal spores may arise in a similar way.     

Replisome localization in vegetative and aerial hyphae of Streptomyces coelicolor

Using a functional fusion of DnaN to enhanced green fluorescent protein, we examined the subcellular localization of the replisome machinery in the vegetative mycelium and aerial mycelium of the multinucleoid organism Streptomyces coelicolor. Chromosome replication took place in many compartments of both types of hypha, with the apical compartments of the aerial mycelium exhibiting the highest replication activity. Within a single compartment, the number of "current" ongoing DNA replications was lower than the expected chromosome number, and the appearance of fluorescent foci was often heterogeneous, indicating that this process is asynchronous within compartments and that only selected chromosomes undergo replication.     

Effects of media composition on submerged culture spores of the entomopathogenic fungus,Metarhizium anisopliae var. acridum Part 2: Effects of media osmolality on cell wall characteristics,carbohydrate concentrations,drying stability,and pathogenicity

This study evaluates osmolality of a submerged conidia-producing medium in relation to the following spore characteristics: yield, morphology (dimensions and cell wall structure), chemical properties of cell wall surfaces (charge, hydrophobicity, and lectin binding), cytoplasmic polyols and trehalose, and performance (drying stability and pathogenicity). Spore production was increased by the addition of up to 150 g l^?1 polyethylene glycol 200 (PEG). Spores from high osmolality medium (HOM spores) containing 100 g l^?1 PEG had thin cell walls and dimensions more similar to blastospores than submerged conidia or aerial conidia. However, a faint electron-dense layer separating primary and secondary HOM spores’ cell walls was discernable by transmission electron microscopy as found in aerial and submerged conidia but not found in blastospores. HOM spores also appeared to have an outer rodlet layer, unlike blastospores, although it was thinner than those observed in submerged conidia. HOM spores’ surfaces possessed hydrophobic microsites, which was further evidence of the presence of a rodlet layer. In addition, HOM spores had concentrations of exposed N-acetyl-β-d-glucosaminyl residues intermediate between blastospores and submerged conidia potentially indicating a masking of underlying cell wall by a rodlet layer. All spore types had exposed α-d-mannosyl and/or α-d-glucosyl residues, but lacked oligosaccharides. Similar to blastospores, HOM spores were less anionic than submerged conida. Although HOM spores had thin cell walls, they were more stable to drying than blastospores and submerged conidia. Relative drying stability did not appear to be the result of differences in polyol or trehalose concentrations, since trehalose concentrations were lower in HOM spores than submerged conidia and polyol concentrations were similar between the two spore types. HOM spores had faster germination rates than submerged conidia, similar to blastospores, and they were more pathogenic to Schistocerca americana than submerged conidia and aerial conidia.