Direct Haplotype‐Specific DNA Sequencing

Abstract

Determining haplotype‐specific DNA sequence information is very important in a wide range of research fields. However, no simple and robust approaches are currently available for determining haplotype‐specific sequence information. We have addressed this problem by developing a very simple and robust haplotype‐specific sequencing approach. We utilise the fact that DNA sequencing polymerases are sensitive to 3′end mismatches in the sequencing primer. By using two sequencing primers with 3′end corresponding to the two alleles in a given SNP locus, we are able to obtain allele‐specific DNA sequences from both alleles.

We evaluated this direct haplotype‐specific approach by determining haplotypes within the intron 2 sequence of the fructan‐6‐fructosyltransferase (6‐ft) gene in Lolium perenne L. We obtained reliable haplotype‐specific sequences for all primers and genotypes evaluated. We conclude that the haplotype‐specific sequencing is robust, and that the approach has a potentially very wide application range for any diploid organism.     

Sequence-specific microscopic visualization of DNA methylation status at satellite repeats in individual cell nuclei and chromosomes

Methylation-specific fluorescence in situ hybridization (MeFISH) was developed for microscopic visualization of DNA methylation status at specific repeat sequences in individual cells. MeFISH is based on the differential reactivity of 5-methylcytosine and cytosine in target DNA for interstrand complex formation with osmium and bipyridine-containing nucleic acids (ICON). Cell nuclei and chromosomes hybridized with fluorescence-labeled ICON probes for mouse major and minor satellite repeats were treated with osmium for crosslinking. After denaturation, fluorescent signals were retained specifically at satellite repeats in wild-type, but not in DNA methyltransferase triple-knockout (negative control) mouse embryonic stem cells. Moreover, using MeFISH, we successfully detected hypomethylated satellite repeats in cells from patients with immunodeficiency, centromeric instability and facial anomalies syndrome and 5-hydroxymethylated satellite repeats in male germ cells, the latter of which had been considered to be unmethylated based on anti-5-methylcytosine antibody staining. MeFISH will be suitable for a wide range of applications in epigenetics research and medical diagnosis.     

DNA Duplexes Containing Altered Sugar Residues as Probes of EcoRII and MvaI Endonuclease Interactions with Sugar-Phosphate Backbone

Abstract

Oligonucleotides containing 1-(β-D-2′-deoxy-threo-pentofuranosyl)cytosine (dCx) and/or 1-(β-D-2′-deoxy-threo-pentofuranosyl)thymine (dT_x) in place of dC and dT residues in the EcoRII and MvaI recognition site CC^A/_TGG were synthesized in order to investigate specific recognition of the DNA sugar-phosphate backbone by EcoRII and MvaI restriction endonucleases. In 2′-deoxyxylosyl moieties of dC_x and dT_x, 3′-hydroxyl groups were inverted, which perturbs the related individual phosphates. Introduction of a single 2′-deoxyxylo-syl moiety into a dC·dG pair resulted in a minor destabilization of double-stranded DNA structure. In the case of a dA·dT pair the effect of a 2′-deoxyxylose incorporation was much more pronounced. Multiple dC_x modifications and their combination with dT_x did not enhance the destabilization effect. Hydrolysis of dC_x-containing DNA duplexes by EcoRII endonuclease was blocked and binding affinity was strongly depended on the location of an altered sugar. A DNA duplex containing a dT_x residue was cleaved by the enzyme, but k_cat/K_M was slightly reduced. In contrast, MvaI endonuclease efficiently cleaved both types of sugar-altered substrate analogs. However it did not cleave conformationally perturbed scissile bonds, when the corresponding unmodified bonds were perfectly hydrolyzed in the same DNA duplexes. Based on these data the possible contributions of individual phosphates in the recognition site to substrate recognition and catalysis by EcoRII were proposed. We observed strikingly non-equivalent inputs for different phosphates with respect to their effect on EcoRII-DNA complex formation.     

Use of a biotinylated probe and in situ hybridization for light and electron microscopic localization of P 0 mRNA in myelin-forming Schwann cells

Summary A biotinylated P ₀ glycoprotein cDNA was hybridized in situ to aldehyde-fixed vibratome sections and to aldehyde-fixed thin sections of Lowicryl-embedded trigeminal ganglia of 15 day old rats. Alkaline phosphatase and peroxidase detectors were used for light microscopic (LM) studies and peroxidase or colloidal gold were employed for electron microscopic (EM) detection. In both LM and EM sections, probe was found in cytoplasmic areas of myelinforming Schwann cells that were enriched in granular endoplasmic reticulum, demonstrating that these regions contain P ₀ mRNA. Interestingly, P ₀ mRNA tended to cluster in regions close to the developing myelin sheath. Relatively simple methods are here described for EM detection of mRNA with reasonable tissue preservation and high resolution. These methods may be useful for developmental and disease-related studies of specific mRNAs in mammalian tissues.     

Shape readout of AT‐rich DNA by carbohydrates

Gene expression can be altered by small molecules that target DNA; sequence as well as shape selectivities are both extremely important for DNA recognition by intercalating and groove‐binding ligands. We have characterized a carbohydrate scaffold (1) exhibiting DNA “shape readout” properties. Thermodynamic studies with 1 and model duplex DNAs demonstrate the molecule's high affinity and selectivity towards B* form (continuous AT‐rich) DNA. Isothermal titration calorimetry (ITC), circular dichroism (CD) titration, ultraviolet (UV) thermal denaturation, and Differential Scanning Calorimetry were used to characterize the binding of 1 with a B* form AT‐rich DNA duplex d[5′‐G₂A₆T₆C₂‐3′]. The binding constant was determined using ITC at various temperatures, salt concentrations, and pH. ITC titrations were fit using a two‐binding site model. The first binding event was shown to have a 1:1 binding stoichiometry and was predominantly entropy‐driven with a binding constant of approximately 10⁸ M^?1. ITC‐derived binding enthalpies were used to obtain the binding‐induced change in heat capacity (ΔC_p) of ?225 ± 19 cal/mol·K. The ionic strength dependence of the binding constant indicated a significant electrolytic contribution in ligand:DNA binding, with approximately four to five ion pairs involved in binding. Ligand 1 displayed a significantly higher affinity towards AT‐tract DNA over sequences containing GC inserts, and binding experiments revealed the order of binding affinity for 1 with DNA duplexes: contiguous B* form AT‐rich DNA (d[5′‐G₂A₆T₆C₂‐3′]) >B form alternate AT‐rich DNA (d[5′‐G₂(AT)₆C_2‐3′]) > A form GC‐rich DNA (d[5′‐A₂G₆C₆T₂‐3′]), demonstrating the preference of ligand 1 for B* form DNA. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 720–732, 2014.     

Recognition of specific and nonspecific DNA by human lactoferrin

The general principles of recognition of nucleic acids by proteins are among the most exciting problems of molecular biology. Human lactoferrin (LF) is a remarkable protein possessing many independent biological functions, including interaction with DNA. In human milk, LF is a major DNase featuring two DNA‐binding sites with different affinities for DNA. The mechanism of DNA recognition by LF was studied here for the first time. Electrophoretic mobility shift assay and fluorescence measurements were used to probe for interactions of the high‐affinity DNA‐binding site of LF with a series of model‐specific and nonspecific DNA ligands, and the structural determinants of DNA recognition by LF were characterized quantitatively. The minimal ligands for this binding site were orthophosphate (K_i = 5 mM), deoxyribose 5'‐phosphate (K_i = 3 mM), and different dNMPs (K_i = 0.56–1.6 mM). LF interacted additionally with 9–12 nucleotides or nucleotide pairs of single‐ and double‐stranded ribo‐ and deoxyribooligonucleotides of different lengths and sequences, mainly through weak additive contacts with internucleoside phosphate groups. Such nonspecific interactions of LF with noncognate single‐ and double‐stranded d(pN)₁₀ provided ~6 to ~7.5 orders of magnitude of the enzyme affinity for any DNA. This corresponds to the Gibbs free energy of binding (ΔG⁰) of ?8.5 to ?10.0 kcal/mol. Formation of specific contacts between the LF and its cognate DNA results in an increase of the DNA affinity for the enzyme by approximately 1 order of magnitude (K_d = 10 nM; ΔG⁰ ≈ ?11.1 kcal/mol). A general function for the LF affinity for nonspecific d(pN)_n of different sequences and lengths was obtained, giving the K_d values comparable with the experimentally measured ones. A thermodynamic model was constructed to describe the interactions of LF with DNA. Copyright © 2013 John Wiley & Sons, Ltd.     

Restriction of bacteriophage lambda by Escherichia coli K

Derivatives of phage lambda, for which the numbers and positions of the recognition sites for endonuclease R. Eco_k are known, were used as substrates for the Escherichia coli K restriction system in vivo and in vitro. A single unmodified recognition site was sufficient for a DNA molecule to be bound and broken by the K restriction enzyme. Although discrete fragments of DNA were not produced, the breaks were made preferentially in the proximity of the recognition site. Breakage of a DNA molecule with only one recognition site required a 10 to 40-fold higher concentration of restriction enzyme than breakage of a DNA molecule with two or more recognition sites, but these substrates were all equally effective in a binding assay for the enzyme.The polynucleotide kinase reaction provided no evidence for new 5′-terminal sequences generated by restriction in vitro; the 5′ termini were either refractory to the polynucleotide kinase reaction or had no sequence specificity.     

In vitro selection and characterization of DNA aptamers recognizing chloramphenicol

Chloramphenicol (Cam), although an effective antibiotic, has lost favour due to some fatal side effects. Thus there is an urgent need for rapid and sensitive methods to detect residues in food, feed and environment. We engineered DNA aptamers that recognize Cam as their target, by conducting in vitro selections. Aptamers are nucleic acid recognition elements that are highly specific and sensitive towards their targets and can be synthetically produced in an animal-friendly manner, making them ethical innovative alternatives to antibodies. None of the isolated aptamers in this study shared sequence homology or structural similarities with each other, indicating that specific Cam recognition could be achieved by various DNA sequences under the selection conditions used. Analyzing the binding affinities of the sequences, demonstrated that dissociation constants (K_d) in the extremely low micromolar range, which were lower than those previously reported for Cam-specific RNA aptamers, were achieved. The two best aptamers had G rich (>35%) nucleotide regions, an attribute distinguishing them from the rest and apparently responsible for their high selectivity and affinity (K_d ∼ 0.8 and 1 μM respectively). These aptamers open up possibilities to allow easy detection of Cam via aptamer-based biosensors.     

Ultrafast electron transfer in the recognition of different DNA sequences by a DNA-binding protein with different dynamical conformations

Ultrafast electron transfer (ET) phenomenon in protein and protein–DNA complex is very much crucial and often leads to the regulation of various kinds of redox reactions in biological system. Although, the conformation of the protein in protein–DNA complex is concluded to play the key role in the ET process, till date very little evidences exist in the literature. λ-repressor–operator DNA interaction, particularly O_R1 and O_R2, is a key component of the λ-genetic switch and is a model system for understanding the chemical principles of the conformation-dependent ET reaction, governed by differential protein dynamics upon binding with different DNA target sequences. Here, we have explored the photoinduced electron transfer from the tryptophan moieties of the protein λ-repressor to two operators DNA of different sequences (O_R1 and O_R2) using picosecond-resolved fluorescence spectroscopy. The enhanced flexibility and different conformation of the C-terminal domain of the repressor upon complexation with O_R1 DNA compared to O_R2 DNA are found to have pronounced effect on the rate of ET. We have also observed the ET phenomenon from a dansyl chromophore, bound to the lysine residue, distal from the DNA-binding domain of the protein to the operator DNA with a specific excitation at 299?nm wavelength. The altered ET dynamics as a consequence of differential protein conformation upon specific DNA sequence recognition may have tremendous biological implications.     

Homing endonuclease I-CreI derivatives with novel DNA target specificities

Homing endonucleases are highly specific enzymes, capable of recognizing and cleaving unique DNA sequences in complex genomes. Since such DNA cleavage events can result in targeted allele-inactivation and/or allele-replacement in vivo, the ability to engineer homing endonucleases matched to specific DNA sequences of interest would enable powerful and precise genome manipulations. We have taken a step-wise genetic approach in analyzing individual homing endonuclease I-CreI protein/DNA contacts, and describe here novel interactions at four distinct target site positions. Crystal structures of two mutant endonucleases reveal the molecular interactions responsible for their altered DNA target specificities. We also combine novel contacts to create an endonuclease with the predicted target specificity. These studies provide important insights into engineering homing endonucleases with novel target specificities, as well as into the evolution of DNA recognition by this fascinating family of proteins.     

Design of Sequence-Specific DNA Binding Ligands That Use a Two-Stranded Peptide Motif for DNA Sequence Recognition

Abstract

The design and DNA binding activity of β-structure-forming peptides and netropsin-peptide conjugates are reported. It is found that a pair of peptides - S,S'-bis(Lys-Gly-Val-Cys-Val- NH-NH-Dns) - bridged by an S-S bond binds at least 10 times more strongly to poly(dG)?poly(dC) than to poly(dA)?poly(dT). This peptide can also discriminate between 5′-GpG-3′ and 5′-GpC-3′ steps in the DNA minor groove. Based on these observations, new synthetic ligands, bis-netropsins, were constructed in which two netropsin-like fragments were attached by means of short linkers to a pair of peptides - Gly-Cys-Gly- or Val-Cys-Val - bridged by S-S bonds. These compounds possess a composite binding specificity: the peptide chains recognize 5′-GpG-3′ steps on DNA, whereas the netropsin-like fragments bind preferentially to tuns of 4 AT base pairs. Our data indicate that combining the AT-base-pair specific properties of the netropsin-type structure with the 5′-GpG-3′-specific properties of certain oligopeptides offers a new approach to the synthesis of ligands capable of recognizing mixed sequences of AT- and GC-base pairs in the DNA minor groove. These compounds are potential models for DNA-binding domains in proteins which specifically recognize base pair sequences in the minor groove of DNA.     

Structural basis for HIV‐1 DNA integration in the human genome,role of the LEDGF/P75 cofactor

Integration of the human immunodeficiency virus (HIV‐1) cDNA into the human genome is catalysed by integrase. Several studies have shown the importance of the interaction of cellular cofactors with integrase for viral integration and infectivity. In this study, we produced a stable and functional complex between the wild‐type full‐length integrase (IN) and the cellular cofactor LEDGF/p75 that shows enhanced in vitro integration activity compared with the integrase alone. Mass spectrometry analysis and the fitting of known atomic structures in cryo negatively stain electron microscopy (EM) maps revealed that the functional unit comprises two asymmetric integrase dimers and two LEDGF/p75 molecules. In the presence of DNA, EM revealed the DNA‐binding sites and indicated that, in each asymmetric dimer, one integrase molecule performs the catalytic reaction, whereas the other one positions the viral DNA in the active site of the opposite dimer. The positions of the target and viral DNAs for the 3′ processing and integration reaction shed light on the integration mechanism, a process with wide implications for the understanding of viral‐induced pathologies.     

Titanium Dioxide Nanoparticle-Based Interdigitated Electrodes: A Novel Current to Voltage DNA Biosensor Recognizes E. coli O157:H7

Nanoparticle-mediated bio-sensing promoted the development of novel sensors in the front of medical diagnosis. In the present study, we have generated and examined the potential of titanium dioxide (TiO₂) crystalline nanoparticles with aluminium interdigitated electrode biosensor to specifically detect single-stranded E.coli O157:H7 DNA. The performance of this novel DNA biosensor was measured the electrical current response using a picoammeter. The sensor surface was chemically functionalized with (3-aminopropyl) triethoxysilane (APTES) to provide contact between the organic and inorganic surfaces of a single-stranded DNA probe and TiO₂ nanoparticles while maintaining the sensing system’s physical characteristics. The complement of the target DNA of E. coli O157:H7 to the carboxylate-probe DNA could be translated into electrical signals and confirmed by the increased conductivity in the current-to-voltage curves. The specificity experiments indicate that the biosensor can discriminate between the complementary sequences from the base-mismatched and the non-complementary sequences. After duplex formation, the complementary target sequence can be quantified over a wide range with a detection limit of 1.0 x 10^-13M. With target DNA from the lysed E. coli O157:H7, we could attain similar sensitivity. Stability of DNA immobilized surface was calculated with the relative standard deviation (4.6%), displayed the retaining with 99% of its original response current until 6 months. This high-performance interdigitated DNA biosensor with high sensitivity, stability and non-fouling on a novel sensing platform is suitable for a wide range of biomolecular interactive analyses.     

In vivoandin vitroStudies of TrpR-DNA Interactions

The binding of tryptophan repressor (TrpR) to its operators was examined quantitatively usingin vitroandin vivomethods. DNA sequence requirements for 1:1 and tandem 2 :1 (TrpR : DNA) binding in various sequence contexts were studied. The results indicate that the optimal half-site sequence for recognition by one helix-turn-helix motif of one TrpR dimer is_{3′ CNTGA 5′}^{5′ GNACT 3′}, consistent with contacts observed by X-ray diffraction analysis of cocrystalline 1:1 and 2 :1 complexes. Half-sites can be paired to form a palindrome either by direct abutment, forming the nucleation site for a tandem 2 :1 complex, or with an 8-base-pair spacer, forming a 1:1 target. Dimethylsulfate (DMS) methylation-protection footprintingin vitroof 1:1 and 2 :1 complexes formed sequentially on the two unequal half-site pairs of thetrpEDCBA operator fromSerratia marcescensindicated an obligate hierarchy of site occupancy, with one half-site pair serving as the nucleation site for tandem binding. DMS footprinting ofEscherichia colioperatorsin vivoshowed that, over a wide range of intracellular TrpR concentration, thetrpEDCBA operator is occupied by three repressor dimers,aroH is occupied by two dimers, and the 1:1 binding mode is used on thetrpR operator. The coexistence of these distinct occupancy states implies that changes in protein concentration affect only the fractional occupancy of each operator rather than the binding mode, which is determined by the number of half-site sequences present in the operator region. Cooperativity of tandem complex formation measured by gel retardation using a symmetrized synthetic operator containing identical, optimal sites spaced as in natural operators was found to be modest, implying a maximum coupling free energy of ∼−2 kcal/mol. On other sequences the apparent degree of cooperativity, as well as the apparent affinity, varied with sequence and sequence context in a manner consistent with the structural models and which suggests compensation between affinity and cooperativity as a mechanism that allows tolerance of operator sequence variation.     

Avoidance of DNA methylation

Theocr ⁺ gene of bacterial virus T7 codes for the first protein recognized to inhibit a specific group of DNA methylases. The recognition sequences of several other DNA methylases, not susceptible to Ocr inhibition, are significantly suppressed in the virus genome. The bacterial virus T3 encodes an Ado-Met hydrolase, destroying the methyl donor and causing T3 DNA to be totally unmethylated. These observations could stimulate analogous investigations into the regulation of DNA methylation patterns of eukaryotic viruses and cells. For instance, an underrepresentation of methylation sites (5′-CG) is also true for animal DNA viruses. Moreover, we were able to disclose some novel properties of DNA restriction-modification enzymes concerning the protection of DNA recognition sequences in which only one strand can be methylated (e.g., type III enzymeEcoP15) and the primary resistance of (unmethylated) DNA recognition sites towards type II restriction endonucleaseEcoRII.     

Chicken oviduct progesterone receptor: Location of specific regions of high-affinity binding in cloned DNA fragments of hormone-responsive genes

We have used a DNA-cellulose competitive binding assay to measure the extent of displacement of the chicken oviduct progesterone-receptor complex from calf thymus DNA-cellulose by purified cloned fragments of genomic DNA. Several DNA fragments from hormonally responsive genes coding for egg-white proteins were found to be efficient competitors for either crude or partially purified receptor complexes when compared with calf thymus DNA. Data obtained with deletion mutations constructed in vitro allowed delineation of a specific region necessary for strong competition, located 250–300 bp upstream from the mRNA startsite of the oval-bumin gene. Sequence homologies with this 5′-upstream region were observed in other fragments of the ovalbumin, conalbumin, ovomucoid, X and Y genes, which were also efficient competitors. Based on a comparison of such sequences of homology, a consensus sequence that may constitute a region binding progesterone-receptor complex has been constructed: ATC_TT^CCATT_T^ATCTG_T^GTTGTA. The results suggest that specific double-stranded DNA sequences are recognized by. the oviduct progesterone-receptor complex in vitro, and are relevant to the question of whether specific DNA sequences are directly involved as genomic binding sites for steroid receptors.     

Binding properties of human telomeric quadruplex multimers: a new route for drug design

Human telomeric G-quadruplex structures are known to be promising targets for an anticancer therapy. In the past decade, several research groups have been focused on the design of new ligands trying to optimize the interactions between these small molecules and the G-quadruplex motif. In most of these studies, the target structures were the single quadruplex units formed by short human DNA telomeric sequences (typically 21-26 nt). However, the 3′-terminal single-stranded human telomeric DNA is actually 100-200 bases long and can form higher-order structures by clustering several consecutive quadruplex units (multimers). Despite the increasing number of structural information on longer DNA telomeric sequences, very few data are available on the binding properties of these sequences compared with the shorter DNA telomeric sequences.In this paper we use a combination of spectroscopic (CD, UV and fluorescence) and calorimetric techniques (ITC) to compare the binding properties of the (TTAGGG)₈TT structure formed by two adjacent quadruplex units with the binding properties of the (AG₃TT)₄ single quadruplex structure. The three side-chained triazatruxene derivative azatrux and TMPyP4 cationic porphyrin were used as quadruplex ligands. We found that, depending on the drug, the number of binding sites per quadruplex unit available in the multimer structure was smaller or greater than the one expected on the basis of the results obtained from individual quadruplex binding studies. This work suggests that the quadruplex units along a multimer structure do not behave as completely independent. The presence of adjacent quadruplexes results in a diverse binding ability not predictable from single quadruplex binding studies. The existence of quadruplex-quadruplex interfaces in the full length telomeric overhang may provide an advantageous factor in drug design to enhance both affinity and selectivity for DNA telomeric quadruplexes.