Elemental imaging by EELS and EDXS in the analytical electron microscope

Electron energy loss spectroscopy (EELS) and energy dispersive X-ray spectroscopy (EDXS) can be used to obtain elemental maps from thin biological samples in the analytical electron microscope. The EELS is particularly sensitive for the low-atomic-number elements, including C, N, and O, as well as other elements with favorable ionization cross-sections, such as Fe. The EDXS is useful for a complementary range of atoms, such as P, S, K, and Ca. A system is described for obtaining elemental distributions in an analytical electron microscope operated in the scanning transmission mode at 100–200 keV beam energy. The spatial resolution is typically limited to 10–20 nm when a conventional source is used. A satellite microcomputer controls acquisition of EELS and EDXS data from successive pixels in an image. These data are processed “on-the-fly” by a host computer to remove the noncharacteristic background intensity. Resulting images are stored on disk and can be analyzed by means of an image display system controlled by interactive software. The technique is demonstrated with elemental maps from two samples: alveolar macrophages containing respirable particles; and pancreatic beta cells that secrete insulin.     

Direct Nanoscale Characterization of Deep Levels in AgCuInGaSe2 Using Electron Energy‐Loss Spectroscopy in the Scanning Transmission Electron Microscope

A new experimental framework for the characterization of defects in semiconductors is demonstrated. Through the direct, energy‐resolved correlation of three analytical techniques spanning six orders of magnitude in spatial resolution, a critical mid‐bandgap electronic trap level (E_V + 0.56 eV) within Ag_0.2Cu_0.8In_1?xGa_xSe₂ is traced to its nanoscale physical location and chemical source. This is achieved through a stepwise, site‐specific correlated characterization workflow consisting of device‐scale (≈1 mm²) deep level transient spectroscopy (DLTS) to survey the traps present, scanning probe–based DLTS (scanning‐DLTS) for mesoscale‐resolved (hundreds of nanometers) mapping of the target trap state's spatial distribution, and scanning transmission electron microscope based electron energy‐loss spectroscopy (STEM‐EELS) and X‐ray energy‐dispersive spectroscopy for nanoscale energy‐, structure, and chemical‐resolved investigation of the defect source. This first demonstration of the direct observation of sub‐bandgap defect levels via STEM‐EELS, combined with the DLTS methods, provides strong evidence that the long‐suspected Cu_In/Ga substitutional defects are indeed the most likely source of the E_V + 0.56 eV trap state and serves as a key example of this approach for the fundamental identification of defects within semiconductors, in general.     

Comparing the Detection of Iron-Based Pottery Pigment on a Carbon-Coated Sherd by SEM-EDS and by Micro-XRF-SEM

The same sherd was analyzed using a scanning electron microscope with energy dispersive spectroscopy (SEM-EDS) and a micro X-ray fluorescence tube attached to a scanning electron microscope (Micro-XRF-SEM) to compare the effectiveness of elemental detection of iron-based pigment. To enhance SEM-EDS mapping, the sherd was carbon coated. The carbon coating was not required to produce Micro-XRF-SEM maps but was applied to maintain an unbiased comparison between the systems. The Micro-XRF-SEM analysis was capable of lower limits of detection than that of the SEM-EDS system, and therefore the Micro-XRF-SEM system could produce elemental maps of elements not easily detected by SEM-EDS mapping systems. Because SEM-EDS and Micro-XRF-SEM have been used for imaging and chemical analysis of biological samples, this comparison of the detection systems should be useful to biologists, especially those involved in bone or tooth (hard tissue) analysis.     

Electron probe X-ray microanalysis of cultured myogenic C2C12 cells with scanning and scanning transmission electron microscopy

Heterogeneity of the elemental content of myogenic C2C12 cultured cells was studied by electron probe X-ray microanalysis (EPXMA) with scanning (SEM EPXMA) and scanning transmission electron microscopy (STEM EPXMA). The best plastic substrate for growing cells was Thermanox. For STEM EPXMA, a Formvar film coated with carbon was found to be suitable substrate. The cells examined by scanning transmission electron microscopy showed great heterogeneity in their elemental content in comparison with the cells examined in the scanning electron microscope despite of an almost identical preparation procedure for EPXMA. Nevertheless the K/Na ratios obtained from both methods of EPXMA were very close (4.1 and 4.3). We conclude that the observed discrepancy in the elemental content obtained by the two methods may be due to differences in instrumentation and this must be taken into account when planning a comparative study.     

Dual-axis electron tomography of biological specimens: Extending the limits of specimen thickness with bright-field STEM imaging

The absence of imaging lenses after the specimen in the scanning transmission electron microscope (STEM) enables electron tomography to be performed in the STEM mode on micrometer-thick plastic-embedded specimens without the deleterious effect of chromatic aberration, which limits spatial resolution and signal-to-noise ratio in conventional TEM. Using Monte Carlo calculations to simulate electron scattering from gold nanoparticles situated at the top and bottom surfaces of a plastic section, we assess the optimal acquisition strategy for axial bright-field STEM electron tomography at a beam-energy of 300keV. Dual tilt-axis STEM tomography with optimized axial bight-field detector geometry is demonstrated by application to micrometer-thick sections of beta cells from mouse pancreatic islet. The quality of the resulting three-dimensional reconstructions is comparable to that obtained from much thinner (0.3-micrometer) sections using conventional TEM tomography. The increased range of specimen thickness accessible to axial STEM tomography without the need for serial sectioning enables the 3-D visualization of more complex and larger subcellular structures.     

Use of a Technovit 7200 VLC to Facilitate Integrated Determination of Aluminum by Light and Electron Microscopy

Technovit 7200 VLC is an excellent embedding medium for both inorganic histochemistry by light microscopy and X-ray microanalysis by scanning and transmission electron microscopy. Liver samples from rats after intraperitoneal treatment with aluminum chloride were fixed in glutaraldehyde and embedded in the resin. Thick sections were easily cut on an ultramicrotome and stained with aluminon for aluminum (Al). An intense positive reaction with aluminon was observed in the Kupffer cells by light microscopy. The surface structures of the same resin block cut for light microscopy were observed under a scanning electron microscope fitted with an energy dispersive X-ray spectrometer. The Kupffer cells appeared white in the backscattered mode. Localization of Al in the Kupffer cells was confirmed by an X-ray distribution map in the scanning electron microscope. Subcellular localization of Al in the Kupffer cells was performed on the same semithin sections using a transmission electron microscope equipped with an energy dispersive X-ray spectrometer. Most Al was found in lysosomes of the Kupffer cells. The resin was stable in the electron beam and chlorine-free.     

Three-dimensional locations of gold-labeled proteins in a whole mount eukaryotic cell obtained with 3nm precision using aberration-corrected scanning transmission electron microscopy

Three-dimensional (3D) maps of proteins within the context of whole cells are important for investigating cellular function. However, 3D reconstructions of whole cells are challenging to obtain using conventional transmission electron microscopy (TEM). We describe a methodology to determine the 3D locations of proteins labeled with gold nanoparticles on whole eukaryotic cells. The epidermal growth factor receptors on COS7 cells were labeled with gold nanoparticles, and critical-point dried whole-mount cell samples were prepared. 3D focal series were obtained with aberration-corrected scanning transmission electron microscopy (STEM), without tilting the specimen. The axial resolution was improved with deconvolution. The vertical locations of the nanoparticles in a whole-mount cell were determined with a precision of 3nm. From the analysis of the variation of the axial positions of the labels we concluded that the cellular surface was ruffled. To achieve sufficient stability of the sample under electron beam irradiation during the recording of the focal series, the sample was carbon coated. A quantitative method was developed to analyze the stability of the ultrastructure after electron beam irradiation using TEM. The results of this study demonstrate the feasibility of using aberration-corrected STEM to study the 3D nanoparticle distribution in whole cells.     

Electron‐Beam‐Related Studies of Halide Perovskites: Challenges and Opportunities

Electron beam microscopy and related characterization techniques play an important role in revealing the microstructural, morphological, physical, and chemical information of halide perovskites and their impact on associated optoelectronic devices. However, electron beam irradiation usually causes damage to these beam‐sensitive materials, negatively impacting their device performance, and complicating this interpretation. In this article, the electron microscopy and spectroscopy techniques are reviewed that are crucial for the understanding of the crystallization and microstructure of halide perovskites. In addition, special attention is paid to assessing and mitigating the electron beam‐induced damage caused by these techniques. Since the halide perovskites are fragile, a protocol involving delicate control of both electron beam dose and dose rate, coupled with careful data analysis, is key to enable the acquisition of reliable structural and compositional information such as atomic‐resolution images, chemical elemental mapping and electron diffraction patterns. Limiting the electron beam dose is critical parameter enabling the characterization of various halide perovskites. Novel methods to unveil the mechanisms of device operation, including charge carrier generation, diffusion, and extraction are presented in scanning electron microscopy studies combined with electron‐beam‐induced current and cathodoluminescence mapping. Future opportunities for electron‐beam‐related characterizations of halide perovskites are also discussed.     

Atomic‐Resolution Imaging of Halide Perovskites Using Electron Microscopy

Atomic‐resolution imaging of halide perovskites (HPs) using transmission electron microscopy (TEM) is challenging because of the sensitivity of their structures to the electron beam. In this article, recent achievements in this area are reviewed, covering both all‐inorganic and organic–inorganic hybrid HPs, with an emphasis on the specific imaging conditions that have proven to be effective in avoiding electron beam‐induced structural damage. The discussion focusses on the total electron dose that HPs can bear before being damaged and the effects of different imaging modes, accelerating voltages, and temperatures. The crucial role of a direct‐detection electron‐counting camera in reducing the required electron dose is outlined, which is indispensable for imaging extremely sensitive organic–inorganic hybrid perovskites. In addition to reviewing published works, the results of initial attempts to perform atomic‐resolution elemental mapping for an all‐inorganic HP and image a hybrid HP using scanning TEM are introduced. The preparation of a TEM specimen from macroscopic crystals or devices of HPs, which is very important for practical applications but has not yet received attention, is also discussed. This article aims to provide guidance on the acquisition of atomic‐resolution TEM images of HPs and inspire the development of more imaging technologies for sensitive materials.     

Biomediated synthesis of silver nanoparticles using Exiguobacterium mexicanum

Biomediated silver nanoparticle were synthesized using a cell free extract of a soil bacterium, Exiguobacterium mexicanum PR 10.6. The silver nanoparticles were characterised using UV–Vis spectroscopy, energy dispersive spectroscopy, Fourier transform infrared spectroscopy, and transmission electron microscopy. The nanoparticles ranged from 5 to 40 nm. Extracellular polymeric substance played a critical role in the reduction of silver ion and nanoparticle stabilisation when using the cell free extract. The synthesis using E. mexicanum is an effective eco-friendly, rapid method for silver nanoparticle synthesis within 1 h.     

Whole-Cell Analysis of Low-Density Lipoprotein Uptake by Macrophages Using STEM Tomography

Nanoparticles of heavy materials such as gold can be used as markers in quantitative electron microscopic studies of protein distributions in cells with nanometer spatial resolution. Studying nanoparticles within the context of cells is also relevant for nanotoxicological research. Here, we report a method to quantify the locations and the number of nanoparticles, and of clusters of nanoparticles inside whole eukaryotic cells in three dimensions using scanning transmission electron microscopy (STEM) tomography. Whole-mount fixed cellular samples were prepared, avoiding sectioning or slicing. The level of membrane staining was kept much lower than is common practice in transmission electron microscopy (TEM), such that the nanoparticles could be detected throughout the entire cellular thickness. Tilt-series were recorded with a limited tilt-range of 80° thereby preventing excessive beam broadening occurring at higher tilt angles. The 3D locations of the nanoparticles were nevertheless determined with high precision using computation. The obtained information differed from that obtained with conventional TEM tomography data since the nanoparticles were highlighted while only faint contrast was obtained on the cellular material. Similar as in fluorescence microscopy, a particular set of labels can be studied. This method was applied to study the fate of sequentially up-taken low-density lipoprotein (LDL) conjugated to gold nanoparticles in macrophages. Analysis of a 3D reconstruction revealed that newly up-taken LDL-gold was delivered to lysosomes containing previously up-taken LDL-gold thereby forming onion-like clusters.     

Synthesis and characterization of chitosan/ZnO nanoparticle composite membranes

Novel chitosan/ZnO nanoparticle (CS/nano-ZnO) composite membranes were prepared via the method of sol-cast transformation and studied by UV-vis absorption spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray fluorescence spectrometry (EDX). The characterization revealed that ZnO nanoparticles dispersed homogeneously within the chitosan matrix. The mechanical and antibacterial properties of the product were investigated. The results showed that the ZnO content had an effect on the mechanical properties of CS/nano-ZnO composite membranes, and that the antibacterial activities of CS membranes for Bacillus subtilis, Escherichia coli, and Staphylococcus aureus were enhanced by the incorporation of ZnO. Further, CS/nano-ZnO composite membranes with 6-10 wt % ZnO exhibited high antibacterial activities.     

Novel polyhedral gold nanoparticles: green synthesis,optimization and characterization by environmental isolate of Acinetobacter sp. SW30

Gold nanoparticles have enormous applications in cancer treatment, drug delivery and nanobiosensor due to their biocompatibility. Biological route of synthesis of metal nanoparticles are cost effective and eco-friendly. Acinetobacter sp. SW 30 isolated from activated sewage sludge produced cell bound as well as intracellular gold nanoparticles when challenged with HAuCl₄ salt solution. We first time report the optimization of various physiological parameters such as age of culture, cell density and physicochemical parameters viz HAuCl₄ concentration, temperature and pH which influence the synthesis of gold nanoparticles. Gold nanoparticles thus produced were characterized by various analytical techniques viz. UV–Visible spectroscopy, X-ray diffraction, cyclic voltammetry, transmission electron microscopy, selected area electron diffraction, high resolution transmission electron microscopy, environmental scanning electron microscopy, energy dispersive X-ray spectroscopy, atomic force microscopy and dynamic light scattering. Polyhedral gold nanoparticles of size 20 ± 10 nm were synthesized by 24 h grown culture of cell density 2.4 × 10⁹ cfu/ml at 50 °C and pH 9 in 0.5 mM HAuCl₄. It was found that most of the gold nanoparticles were released into solution from bacterial cell surface of Acinetobacter sp. at pH 9 and 50 °C.     

Ultrastructural localization of silver deposits in the receptacle cells of carnation flowers

Carnations were treated with a silver thiosulphate complex to prevent wilting of the flowers. The ultrastructural localization of silver and sulphur in the receptacle tissue was investigated by electron microscopy. Electron-dense deposits were present in the receptacle tissue. Coarse-grained deposts (diam. 60–100 nm) were predominantly observed at the inner side of the cell wall, whereas fine-grained deposits (diam. 20–60 nm) were predominantly present inside the cell-wall region and in the intercellular spaces. These particles were analyzed for chemical elements by X-ray analytical electron microscopy (Philips EM 400 plus Edax energy dispersive analyzer, type 711). In both types of deposits, the presence of silver and sulphur was verified. Point analysis revealed that in both precipitates the S/Ag ratio was of the same order.Abbreviations CTEM conventional transmission electron microscope - STEM scanning transmission electron microscope The AEM unit is a joint unit of the Erasmus University of Rotterdam, the University of Leyden, and the Health Organization TNO. The analytical microscope was purchased with a grant from the Dutch Organization for Pure Scientific Research (ZWO) through BION     

Biotechnological synthesis of Pd/Ag and Pd/Au nanoparticles for enhanced Suzuki–Miyaura cross-coupling activity

Bimetallic nanoparticle catalysts have attracted considerable attention due to their unique chemical and physical properties. The ability of metal-reducing bacteria to produce highly catalytically active monometallic nanoparticles is well known; however, the properties and catalytic activity of bimetallic nanoparticles synthesized with these organisms is not well understood. Here, we report the one-pot biosynthesis of Pd/Ag (bio-Pd/Ag) and Pd/Au (bio-Pd/Au) nanoparticles using the metal-reducing bacterium, Shewanella oneidensis, under mild conditions. Energy dispersive X-ray analyses performed using scanning transmission electron microscopy (STEM) revealed the presence of both metals (Pd/Ag or Pd/Au) in the biosynthesized nanoparticles. X-ray absorption near-edge spectroscopy (XANES) suggested a significant contribution from Pd(0) and Pd(II) in both bio-Pd/Ag and bio-Pd/Au, with Ag and Au existing predominately as their metallic forms. Extended X-ray absorption fine-structure spectroscopy (EXAFS) supported the presence of multiple Pd species in bio-Pd/Ag and bio-Pd/Au, as inferred from Pd–Pd, Pd–O and Pd–S shells. Both bio-Pd/Ag and bio-Pd/Au demonstrated greatly enhanced catalytic activity towards Suzuki–Miyaura cross-coupling compared to a monometallic Pd catalyst, with bio-Pd/Ag significantly outperforming the others. The catalysts were very versatile, tolerating a wide range of substituents. This work demonstrates a green synthesis method for novel bimetallic nanoparticles that display significantly enhanced catalytic activity compared to their monometallic counterparts.     

Investigation of Elemental Sulfur Speciation Transformation Mediated by Acidithiobacillus ferrooxidans

The speciation transformation of elemental sulfur mediated by the leaching bacterium Acidithiobacillus ferrooxidans was investigated using an integrated approach including scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, energy dispersive X-ray spectroscopy, and X-ray absorption near edge spectroscopy (XANES). Our results showed that when grown on elemental sulfur powder, At. ferrooxidans ATCC23270 cells were first attached to sulfur particles and modified the surface sulfur with some amphiphilic compounds. In addition, part of the elemental sulfur powder might be converted to polysulfides. Furthermore, sulfur globules were accumulated inside the cells. XANES spectra of these cells suggested that these globules consisted of elemental sulfur bound to thiol groups of protein. Huan He and Cheng-Gui Zhang made equal contributions to this paper.     

Cation shifts in human retina-choroid

Human ocular tissues from 50 donor eyes were elementally and morphologically analyzed in order to correlate the elemental content and distribution of Ca, Ba, Cr, Cu, Zn, and Se with ocular morphology, sex, race, irideal pigmentation, age, time of death, birth weight, presence and severity of diabetes, and other pathologies noted at autopsy. Initially, to facilitate the transport of donor tissue to the laboratory, the eyes were fixed in glutaraldehyde. Because our preliminary data revealed alterations in elemental content following chemical fixation of ocular tissues, all of the subsequent samples were analyzed in their fresh, hydrated (unfixed) condition as soon after enucleation as possible. Samples were elementally analyzed by X-ray fluorescence spectrometry (XRF) and proton-induced X-ray emission spectrometry (PIXE) using high resolution Si(Li) X-ray detectors. Tissue was morphologiscally examined by scanning electron microscopy and light microscopy histoichemistry.     

Reprint of "On the feasibility of visualizing ultrasmall gold labels in biological specimens by STEM tomography" [J. Struct. Biol. 159 (2007) 507-522

Labeling with heavy atom clusters attached to antibody fragments is an attractive technique for determining the 3D distribution of specific proteins in cells using electron tomography. However, the small size of the labels makes them very difficult to detect by conventional bright-field electron tomography. Here, we evaluate quantitative scanning transmission electron microscopy (STEM) at a beam voltage of 300 kV for detecting 11-gold atom clusters (Undecagold) and 1.4 nm-diameter nanoparticles (Nanogold) for a variety of specimens and imaging conditions. STEM images as well as tomographic tilt series are simulated by means of the NIST Elastic-Scattering Cross-Section Database for gold clusters embedded in carbon. The simulations indicate that the visibility in 2D of Undecagold clusters in a homogeneous matrix is maximized for low inner collection semi-angles of the STEM annular dark-field detector (15–20 mrad). Furthermore, our calculations show that the visibility of Undecagold in 3D reconstructions is significantly higher than in 2D images for an inhomogeneous matrix corresponding to fluctuations in local density. The measurements demonstrate that it is possible to detect Nanogold particles in plastic sections of tissue freeze-substituted in the presence of osmium. STEM tomography has the potential to localize specific proteins in permeabilized cells using antibody fragments tagged with small heavy atom clusters. Our quantitative analysis provides a framework for determining the detection limits and optimal experimental conditions for localizing these small clusters.