单管可视化环介导等温扩增技术快速检测恶性疟原虫

目的:建立一种基于环介导等温核酸扩增技术(Loop-mediated Isothermal Amplification,LAMP)的恶性疟原虫高灵敏可视化闭管检测方法。方法:针对恶性疟原虫核糖体DNA的序列保守区设计LAMP引物,通过优化LAMP体系中的Mg2+、甜菜碱浓度和反应温度等因素,建立环介导等温扩增法;并结合蜡封反应管对产物进行检测,检测结果可直接通过肉眼观察SYBR Green I荧光显色进行判定。结果:本方法可检测到70个拷贝/管的恶性疟原虫核酸片段,并具有高特异性,可区分检测常见的血液病毒。该法具有如下优点:1、整个反应恒温进行,无需热循环仪;2、闭管检测,极大降低了扩增产物交叉污染的风险;3、检测速度快,整个检测过程只需30 min。结论:该法的建立为恶性疟原虫的现场快速筛检提供了一种简便、高灵敏、高特异的工具。     

A simple, sensitive, and rapid method for detecting seed contaminated with highly virulent Leptosphaeria maculans.

A primer-directed DNA amplification polymerase chain reaction assay for detection of seed contaminated with highly virulent Leptosphaeria maculans was developed. The primers were derived from a 5,238-bp repetitive sequence present only in the highly virulent isolates of the fungus. A procedure for isolating DNA from organisms infesting germinating seed was also developed. Seeds were added to liquid fungal minimal medium, and the culture was incubated for 3 days at room temperature with shaking. The organisms were collected from the cultures by centrifugation and lysed with a combination of sodium dodecyl sulfate and proteinase K. The DNA was extracted with organic solvents and with a high-salt-cetyltrimethylammonium bromide solution. It was also precipitated with a low-salt-cetyltrimethylammonium bromide solution. The extensive treatments used for minimizing polysaccharide contamination greatly improved the reliability of the assay. The minimum contamination level (2 of 1,000 seeds) that was tested was successfully detected with this DNA isolation procedure. The reliability of the assay was 96% at the 1 to 2% level of seed contamination. The described method is less laborious and requires only 4 to 5 days for completion in comparison to the 11 to 22 days required for the currently employed methods. In addition, large sample sizes can be easily handled, thus reducing the probability of contaminated seed escaping detection.     

Use of DNA-protein interaction to isolate specific genomic DNA sequences.

We describe a simple and rapid method for the isolation of specific genomic DNA sequences recognized by DNA-binding proteins. This procedure consists of four steps: (1) restriction enzyme digestion and size fractionation of genomic DNA; (2) DNA--protein binding using the gel mobility-shift assay; (3) ligation of isolated DNA fragments followed by transformation of Escherichia coli; and (4) screening of recombinant clones for inserts containing specific DNA--protein binding sequences. We have used this protocol to isolate human DNA sequences, 100-200 bp in size, that are recognized by both partially purified and affinity purified proteins. Unlike other procedures designed to identify genomic target sequences, the method described does not require polymerase chain reaction or successive immunoprecipitations.     

副溶血弧菌LAMP检测方法的建立

副溶血弧菌(Vibrio parahaemolyticus)是一种能引起食源性疾病的重要病原菌。首次将一种新颖的核酸扩增技术-环介导等温扩增技术（Loop-Mediated Isothermal Amplification, LAMP）应用于副溶血弧菌的快速检测。针对副溶血弧菌不耐热溶血毒素基因（tlh）设计四条特异性引物（两条内引物和两条外引物）进行LAMP扩增,对扩增反应进行优化,最佳反应时间为60 min,反应温度为60 ℃。对12种细菌共28株菌进行LAMP扩增,仅14株副溶血弧菌得到阳性扩增结果,证明引物具有很高的特异性。副溶血弧菌基因组DNA和纯培养物的检测灵敏度分别约为90 fg和24 cfu/mL。对模拟食品样品进行直接检测,检测限为89 cfu/g。结果表明,该方法检测副溶血弧菌特异性强、灵敏度高,并且操作简便、检测成本低,1 h即可完成,有望发展成为快速检测副溶血弧菌的有效手段。     

A colorimetric method for point mutation detection using high-fidelity DNA ligase

The present study reported proof-of-principle for a genotyping assay approach that can detect single nucleotide polymorphisms (SNPs) through the gold nanoparticle assembly and the ligase reaction. By incorporating the high-fidelity DNA ligase (Tth DNA ligase) into the allele-specific ligation-based gold nanoparticle assembly, this assay provided a convenient yet powerful colorimetric detection that enabled a straightforward single-base discrimination without the need of precise temperature control. Additionally, the ligase reaction can be performed at a relatively high temperature, which offers the benefit for mitigating the non-specific assembly of gold nanoparticles induced by interfering DNA strands. The assay could be implemented via three steps: a hybridization reaction that allowed two gold nanoparticle-tagged probes to hybrid with the target DNA strand, a ligase reaction that generates the ligation between perfectly matched probes while no ligation occurred between mismatched ones and a thermal treatment at a relatively high temperature that discriminate the ligation of probes. When the reaction mixture was heated to denature the formed duplex, the purple color of the perfect-match solution would not revert to red, while the mismatch gave a red color as the assembled gold nanoparticles disparted. The present approach has been demonstrated with the identification of a single-base mutation in codon 12 of a K-ras oncogene that is of significant value for colorectal cancers diagnosis, and the wild-type and mutant type were successfully scored. To our knowledge, this was the first report concerning SNP detection based on the ligase reaction and the gold nanoparticle assembly. Owing to its ease of operation and high specificity, it was expected that the proposed procedure might hold great promise in practical clinical diagnosis of gene-mutant diseases.     

In vitro repair of complex unligatable oxidatively induced DNA double-strand breaks by human cell extracts

We describe a new assay for in vitro repair of oxidatively induced DNA double-strand breaks (DSBs) by HeLa cell nuclear extracts. The assay employs linear plasmid DNA containing DNA DSBs produced by the radiomimetic drug bleomycin. The bleomycin-induced DSB possesses a complex structure similar to that produced by oxidative processes and ionizing radiation. Bleomycin DSBs are composed of blunt ends or ends containing a single 5′-base overhang. Regardless of the 5′-end structure, all bleomycin-induced DSBs possess 3′-ends blocked by phosphoglycolate. Cellular extraction and initial end joining conditions for our assay were optimized with restriction enzyme-cleaved DNA to maximize ligation activity. Parameters affecting ligation such as temperature, time, ionic strength, ATP utilization and extract protein concentration were examined. Similar reactions were performed with the bleomycin-linearized substrate. In all cases, end-joined molecules ranging from dimers to higher molecular weight forms were produced and observed directly in agarose gels stained with Vistra Green and imaged with a FluorImager 595. This detection method is at least 50-fold more sensitive than ethidium bromide and permits detection of ≤0.25 ng double-stranded DNA per band in post-electrophoretically stained agarose gels. Consequently, our end-joining reaction requires ≤100 ng substrate DNA and ≥50% conversion of substrate to product is achieved with simple substrates such as restriction enzyme-cleaved DNA. Using our assay we have observed a 6-fold lower repair rate and a lag in reaction initiation for bleomycin-induced DSBs as compared to blunt-ended DNA. Also, end joining reaction conditions are DSB end group dependent. In particular, bleomycin-induced DSB repair is considerably more sensitive to inhibition by increased ionic strength than repair of blunt-ended DNA.     

Quantification of Escherichia coli genomic DNA contamination in recombinant protein preparations by polymerase chain reaction and affinity-based collection

This study describes the development of a novel assay for the quantification of Escherichia coli genomic DNA contamination in recombinant protein samples. The technique is based on PCR amplification and digoxygenin labeling of the genes encoding 5S ribosomal RNA followed by affinity-based collection and detection. Samples containing 1 pg x mL(-1) of extracted E. coli genomic DNA (gDNA) could be measured using this method. Using extracted E. coli gDNA as standards, a 35-cycle PCR reaction exhibited a linear response versus template concentration between 1 pg x mL(-1) and1 ng x mL(-1) genomic DNA even when diluted in a variety of buffering conditions. Comparison of the novel assay with a traditional filter binding and hybridization technique using recombinant protein samples confirmed that the procedure was accurate and sensitive. The assay described in this report is a safer and less expensive alternative to radioactive techniques employed for DNA quantification, utilizing readily available reagents and apparatus.     

RAPID DETECTION OF BRUCELLA ABORTUS BY A NOVEL PROXIMITY LIGATION-BASED LOOP-MEDIATED ISOTHERMAL AMPLIFICATION METHOD

Brucellosis is one of the most common zoonotic diseases, and current methods of detecting this pathogen are quite difficult. This work combines the benefits of a proximity ligation assay with those of a loop-mediated isothermal amplification method to develop a novel proximity ligation-based loop-mediated isothermal amplification method useful for Brucella detection. The genomic DNA extraction procedure is not needed. Sensitivity of this assay for detecting Brucella abortus is 1  ×  10⁴ cells/mL in buffer and 1  ×  10⁵ cells/mL in milk. The time to detection is within 2 h of initiating the procedure, and no special equipment is needed. This new method is also suitable for the detection of other pathogens, and as such will be useful in the food safety industry.

PRACTICAL APPLICATIONS

Polymerase chain reaction (PCR) is a sensitivity method for microbe detection, but the complicated genomic DNA extraction procedure and costly equipment needed for this method makes the PCR method unpopular in developing countries. In this study, we present the novel proximity ligation-based loop-mediated isothermal amplification (P-LAMP) method for Brucella detection; this is the first time to combine the monoclonal antibody for identify microbe and LAMP method for high performance amplification DNA. The genomic DNA extraction procedure is not needed and a water-bath boiler is the only equipment required to complete the detection process. The P-LAMP method is useful for food safety pathogen detection in developing countries.     

Simplified method for isolation of white cells from whole blood suitable for direct polymerase chain reaction

A simple method for isolating mononuclear cells from whole blood is described. The procedure utilizes phytohemagglutinin to agglutinate the erythrocytes, separating white cells from whole blood in a very brief handling time. The isolated cells are readily subjected to DNA isolation simply by boiling, and the released DNA can be directly employed for the polymerase chain reaction analysis. The efficiency of this method is similar to other conventional methods, but less costly and less time-consuming. This method is particularly useful in analyzing DNA samples from the peripheral blood cells when the simplicity and low cost of the assay are preferable.     

Facile determination of DNA-binding nuclear factor-kappaB by chemiluminescence detection

A simple, rapid, and sensitive method for the assay of a sequence-specific DNA-binding protein, nuclear factor-kappaB (NF-kappaB), has been developed by using a DNA-detectable chemiluminogenic reagent and a centrifugal filter that distinguishes different molecular sizes. After the formation of a complex between NF-kappaB and DNA, the unbound DNA is separated from the complex by the centrifugal filter. The amount of the bound NF-kappaB is estimated by chemiluminescence detection of the bound DNA. This detection is performed within 2 min at room temperature by the use of a chemiluminogenic reagent, 3',4',5'-trimethoxyphenylglyoxal, which selectively recognizes guanine moiety in oligonucleotides or DNAs. This method does not require any labeled probes or antibodies and can determine a concentration as low as 5 nM of DNA-binding NF-kappaB. The sensitivity is nearly the same as that of other methods such as gel shift assay using fluorescence-labeled probes and enzyme-linked immunosorbent assay. Therefore, the current method provides a convenient tool for surveying various DNA-binding proteins.     

Two-step cycle sequencing reduces premature terminations when using primers with high annealing temperatures

Direct cycle sequencing of double-stranded polymerase chain reaction (PCR) products using thermostable polymerase produces fragments that are shorter than expected when the enzyme prematurely detaches as it approaches the 5′-end of the DNA template. These premature terminations result in a substantially reduced reading length of the DNA sequence. Since some DNA templates spontaneously fold and form stable secondary structures at temperatures that are typically used for primer annealing, one factor that may cause premature terminations to occur is the formation of secondary structures in the template during the annealing step of the cycle sequencing reaction. We describe a simple and effective method for reducing premature terminations in DNA sequences. We demonstrate that maintaining the annealing temperature of the cycle sequencing reaction above a critical temperature reduces premature terminations in DNA sequences that regularly contain premature terminations when the temperature of the annealing step is 60°C. In the method described, annealing and extension of the primer along the template take place at the same temperature (72°C). This procedure for reducing premature terminations can be applied when sequencing with primers that are relatively long (at least 27 mer) and have high optimal annealing temperatures.     

A sensitive fluorometric assay for the determination of DNA

A sensitive fluorometric assay for DNA determination using m-diaminobenzoic acid dihydrochloride for the reaction with deoxyribose liberated by perchloric acid is described. Fluorescence is proportional to the amount of DNA over the range 0.05–5 μg of DNA when the reaction is conducted in a volume of 400 μl and over the range 0.01–0.5 μg when the reaction is conducted in a volume of 40 μl. The assay is suitable for estimating DNA both in perchloric acid extracts and in complex mixtures with protein and RNA. The determination of DNA in cells grown as a monolayer by the described method is simple and rapid.     

DNA point mutation detection based on DNA ligase reaction and nano-Au amplification: a piezoelectric approach

A novel piezoelectric method for DNA point mutation detection based on DNA ligase reaction and nano-Au-amplified DNA probes is proposed. A capture probe was designed with the potential point mutation site located at the 3' end and a thiol group at the 5' end to be immobilized on the gold electrode surface of quartz crystal microbalance (QCM). Successive hybridization with the target DNA and detection probe of nano-Au-labeled DNA forms a double-strand DNA (dsDNA). After the DNA ligase reaction and denaturing at an elevated temperature, the QCM frequency would revert to the original value for the target with single-base mismatch, whereas a reduced frequency response would be obtained for the case of the perfect match target. In this way, the purpose of point mutation discrimination could be achieved. The current approach is demonstrated with the identification of a single-base mutation in artificial codon CD17 of the beta-thalassemia gene, and the wild type and mutant type were discriminated successfully. The scanning electron microscope (SEM) image showing that plenty of gold nanoparticles remained on the electrode surface demonstrated that the nano-Au label served as an efficient signal amplification agent in QCM assay. A detection limit of 2.6 x 10(-9)mol/L of oligonucleotides was achieved. Owing to its ease of operation and low detection limit, it is expected that the proposed procedure may hold great promise in both research-based and clinical genomic assays.     

Sequential DEXAS: a method for obtaining DNA sequences from genomic DNA and blood in one reaction

Sequential DEXAS (direct exponential amplification and sequencing), a one step amplification and sequencing procedure that allows accurate, inexpensive and rapid DNA sequence determination directly from genomic DNA, is described. This method relies on the simultaneous use of two DNA polymerases that differ both in their ability to incorporate dideoxynucleotides and in the time at which they are activated during the reaction. One enzyme, which incorporates deoxynucleotides and performs amplification of the target DNA sequence, is supplied in an active state whereas the other enzyme, which incorporates dideoxynucleotides and performs the sequencing reaction, is supplied in an inactive state but becomes activated by a temperature step during the thermocycling. Thus, in the initial stage of the reaction, target amplification occurs, while in the second stage the sequencing reaction takes place. We show that Sequential DEXAS yields high quality sequencing results directly from genomic DNA as well as directly from human blood without any prior isolation or purification of DNA.     

Rapid and sensitive detection of heat-labile I and heat-stable I enterotoxin genes of enterotoxigenic Escherichia coli by Loop-Mediated Isothermal Amplification

We developed a technique for detecting the heat-labile I (LTI) and heat-stable I (STI) genes of enterotoxigenic Escherichia coli (ETEC) using a novel DNA amplification procedure designated Loop-Mediated Isothermal Amplification (LAMP). The detection limit of accelerated LAMP utilizing loop primers was 4 CFU/test for LTI and was 40 CFU/test for STI, which are 10-fold higher than those of conventional PCR assay (detection limit, 40 CFU/test and 400 CFU/test, respectively). No DNA amplification was observed in LT and ST non-producing E. coli or other bacterial strains; thus, high specificity was verified. The specificity of LAMP assay was also confirmed by digestion of LAMP products using restriction enzymes and DNA sequence analysis. In the accelerated LAMP assay, DNA amplification was detected within 35 min, and thus LAMP is superior to conventional PCR in terms of rapidity. It was confirmed that increased concentrations of primers and Bst DNA polymerase could further facilitate the reaction. Furthermore, with the high amplification efficiency of the LAMP assay, amplification can be visually observed by the turbidity caused by magnesium pyrophosphate, a byproduct of the reaction. Detection of LTI and STI in ETEC by LAMP is thus an extremely rapid procedure with high sensitivity and specificity that requires no specialized equipment. This assay is expected to become a valuable tool for rapid diagnosis in ETEC infection.     

LightCycler real-time PCR for rapid detection and quantitation of Mycobacterium leprae in skin specimens

Diagnosis of leprosy is usually based on clinical features and skin smear results including the number of skin lesions. Mycobacterium leprae is not cultivable and bacterial enumeration by microscopic examination is required for leprosy classification, choice in choosing and monitoring chemotherapy regimens, and diagnosis of relapse. However, detection and quantification using standard microscopy yields results of limited specificity and sensitivity. We describe an extremely sensitive and specific assay for the detection and quantification of M. leprae in skin biopsy specimens. Primers that amplified a specific 171-bp fragment of M. leprae 16S rRNA gene were chosen and specificity was verified by amplicon melting temperature. The method is sensitive enough to detect as low as 20 fg of M. leprae DNA, equivalent to four bacilli. The assay showed 100% concordance with clinical diagnosis in cases of multibacillary patients, and 50% of paucibacillary leprosy. The entire procedure of DNA extraction and PCR could be performed in c. 3 h. According to normalized quantitative real-time PCR, the patients in this study had bacilli numbers in the range of 1.07 x 10(2) -1.65 x 10(8) per 6-mm3 skin biopsy specimen. This simple real-time PCR assay is a facile tool with possible applications for rapid detection and simultaneous quantification of leprosy bacilli in clinical samples.     

Potentiometric and colorimetric methods for the assay of 2',3'-cyclic nucleotide 3'-phosphohydrolase

Abstract— A potentiometric titration method for the assay of 2′,3′-cyclic nucleotide 3′-phosphohydrolase is presented. Progress curves of the reaction were recorded automatically by pH-stat. 2-Mercaptoethanol was added to the reaction mixture to maintain a linear rate of reaction. The method is suitable for obtaining kinetic parameters and can be used for the rapid assay of 2′,3′-cyclic nucleotide 3′-phosphohydrolase in nervous tissues. An improved colorimetric method for estimation of 2′,3′-cyclic nucleotide 3′-phosphohydrolase activity at the optimum pH is described. This method employs the two-step procedure in which decyclization by 2′,3′-cyclic nucleotide 3′-phosphohydrolase and dephosphorylation by Escherichia coli alkaline phosphatase (EC 3.1.3.1) are carried out separately under the optimum conditions for each enzyme. The method is sensitive and most convenient for routine assays.     

Torsionally constrained DNA for single-molecule assays: an efficient,ligation-free method

Controlled twisting of individual, double-stranded DNA molecules provides a unique method to investigate the enzymes that alter DNA topology. Such twisting requires a single DNA molecule to be torsionally constrained. This constraint is achieved by anchoring the opposite ends of the DNA to two separate surfaces via multiple bonds. The traditional protocol for making such DNA involves a three-way ligation followed by gel purification, a laborious process that often leads to low yield both in the amount of DNA and the fraction of molecules that is torsionally constrained. We developed a simple ligation-free procedure for making torsionally constrained DNA via polymerase chain reaction (PCR). This PCR protocol used two ‘megaprimers’, 400-base-pair long double-stranded DNA that were labelled with either biotin or digoxigenin. We obtained a relatively high yield of gel-purified DNA (∼500 ng/100 µl of PCR reaction). The final construct in this PCR-based method contains only one labelled strand in contrast to the traditional construct in which both strands of the DNA are labelled. Nonetheless, we achieved a high yield (84%) of torsionally constrained DNA when measured using an optical-trap-based DNA-overstretching assay. This protocol significantly simplifies the application and adoption of torsionally constrained assays to a wide range of single-molecule systems.     

Specific triplex binding capacity of mixed base sequence duplex nucleic acids used for single-nucleotide polymorphism detection

Specific base recognition and binding between native double-stranded DNA (dsDNA) and complementary single-stranded DNA (ssDNA) of mixed base sequence is presented. Third-strand binding, facilitated and stabilized by a DNA intercalator, YOYO-1, occurs within 5 min at room temperature. This triplex binding capability has been used to develop a homogeneous assay that accurately detects 1-, 2-, or 3-bp mutations or deletions in the dsDNA target. Every type of 1-bp mismatch can be identified. The assay can reliably distinguish homozygous from heterozygous polymerase chain reaction (PCR)-amplified genomic dsDNA, thus providing a highly sensitive clinical diagnostic assay.