分子识别诱导的蛋白质和核酸多层膜的有序组装

通过生物大分子之间的特异性结合,采用表面等离激元共振技术监测,报导了支撑于固体表面脂单层膜上进行的亲和素、生物素标记的质粒ＤＮＡ、以及从系统性红斑狼疮患者血清中获得的抗ＤＮＡ抗体多层膜的有序组装。这种生物大分子的组装技术可以用于生物传感器以检测特定的抗原抗体。     

分子识别诱导的蛋白质和核酸多层膜的有序组装

通过生物大分子之间的特异性结合,采用表面等离激元共振技术监测,报导了支撑于固体表面脂单层膜上进行的亲和素、生物素标记的质粒ＤＮＡ,以及从系统性红斑狼疮患者血清中获得的抗ＤＮＡ抗体多层膜的有序组装。这种生物大分子的组装技术可以用于生物传感器以检测特定的抗原抗体。     

基于悬液芯片系统的新城疫病毒强、弱毒高通量检测方法的建立

目的:利用悬液芯片系统建立一种高通量检测新城疫病毒强、弱毒的方法并将该方法的灵敏度与传统的酶联免疫反应(ELISA)进行比较.方法:将F48E9和LaSota单克隆抗体通过共价偶联的方式连接到聚苯乙烯微球的表面构成捕获抗体,利用捕获抗体、检测物、生物素化的多抗及链霉亲和素化的藻红蛋白建立双抗夹心的免疫检测模式.检测物作为抗原与捕获抗体结合后与生物素化的新城疫多抗进行反应,反应完成后,用链霉亲和素标记的荧光探针对反应产物进行标记得到悬液芯片系统的检测物.结果:微球包被实验结果表明,包被100 μL微球所需F48E9和LaSota单克隆抗体的最佳量分别是14.85 μg和17.65 μg;新城疫病毒多抗的最佳稀释倍数为400倍;悬液芯片检测方法检测NDV强毒的灵敏度为1∶160,弱毒的灵敏度为1∶320;抗体特异性实验表明,该方法所使用的两种捕获抗体的体异性良好.该方法与传统的ELISA在相同灵敏度的前提下,其在检测时间、检测步骤及高通量方面优于ELISA.结论:基于悬液芯片系统的新城疫强、弱毒高通量检测方法的建立对于该病毒的快速诊断具有重要的意义.     

水蛭素在噬菌体表面的展示

水蛭素是凝血酶强有力的天然抑制剂。通过改造噬菌质粒并构建水蛭素表达载体pCANTAB 5G8Hir,使水蛭素基因通过接头与噬菌体M13的gp3(197～406)基因片段融合。表达产物在gp8信号肽的引导下到达大肠杆菌周质,在辅助噬菌体M13KO7的帮助下组装到丝状噬菌体外壳上。展示在噬菌体表面的水蛭素仍然具有与凝血酶结合并抑制酶活性的作用,说明展示的水蛭素保持了正确的空间构象和生物学活性。水蛭素在噬菌体表面的功成展示为进一步开展其实验定向进化以及结构与功能关系的研究打下基础。     

H5亚型禽流感病毒单抗-生物素捕获ELISA的建立

目的建立一种单克隆抗体介导的、经生物素—亲和素系统放大的H5亚型禽流感病毒捕获ELISA检测方法,为进一步研究检测试剂盒提供基础。方法用亲和层析法纯化抗禽流感病毒H5亚型血凝素单克隆抗体,包被微量反应板,用于捕获病毒抗原,再用生物素标记的单抗和酶标亲和素来检测病毒血凝素抗原,经方阵试验优化ELISA反应体系。用该方法检测H1—H15亚型AIV标准毒株和H5、H7、H9亚型AIV分离株,并与血凝和血凝抑制试验比较,评价其敏感性和特异性。结果纯化后的单抗具有良好的反应活性,生物素标记单抗工作浓度为1∶5000;ELISA对H5亚型AIV的检出限为025个血凝单位。该ELISA反应体系能检出H5N3标准株和所有20株国内H5亚型AIV分离株,而与其他14个血凝素亚型的AIV标准株、15个H9亚型AIV分离株和2个H7亚型AIV分离株均无交叉反应。结论初步建立了检测H5亚型禽流感病毒的单抗—生物素捕获ELISA方法,为研制试剂盒和进一步应用试验提供了基础。     

基于亲和素-生物素双夹心体系测定外源性蛋白血清动态浓度的非抗体依赖新方法

建立一种非抗体依赖的检测外源性蛋白多肽分子代谢动力学血清浓度及动态变化的新方法．链亲和素为捕获分子,加入待测生物素标记蛋白或合成肽,辣根过氧化物酶标记链亲和素为检测分子,构成链亲和素-生物素标记大分子-酶链亲和素的双夹心体系,并进行特异性、敏感性、准确性及稳定性评价．本检测体系灵敏度高,可达0.3125 μg/L,且可通过改变亲和素包被浓度调整检出敏感度与检测范围．准确性回收率为97.82%～107.92%,批内、批间变异系数分别< 5.76% 和< 8.42%,并成功应用在生物素标记人血清白蛋白(biotin-HSA)与生物素标记鸡卵黏蛋白(biotin-OVM)的小鼠血清浓度动态检测．本方法不依赖抗体与放射性核素,可望在外源性蛋白多肽大分子及其药物的体内定量检测和代谢动力学研究中广泛应用．     

一种简易SNP 检测方法的建立

目的:建立一种快速、简单的SNP(Single Nucleotide Polymorphisms)检测方法。方法:设计带生物素标记的扩增引物对检测用具有单碱基差异的野生型和突变型靶序列分别进行扩增,然后通过紫外交联的方式将相应检测靶序列的探针固定在硝酸纤维素膜上,借助Taq酶完成膜上单引物延伸,从而对探针捕获的靶序列进行延伸固定在膜上,最后使用生物素-亲和素酶联显色(ABS-ELISA)反应肉眼观察结果。结果:阳性和阴性对照探针显示正常。野生型探针和突变型探针能够分别特异性结合靶序列,并通过生物素和亲和素显色系统放大为一种肉眼可判断结果的检测形式。结论:建立了一种基于硝酸纤维素膜载体上进行核酸扩增的SNP检测方法。     

一种简易SNP检测方法的建立

目的：建立一种快速、简单的SNP（Single Nucleotide Polymorphisms）检测方法。方法：设计带生物素标记的扩增引物对检测用具有单碱基差异的野生型和突变型靶序列分别进行扩增,然后通过紫外交联的方式将相应检测靶序列的探针固定在硝酸纤维素膜上,借助Taq酶完成膜上单引物延伸,从而对探针捕获的靶序列进行延伸固定在膜上,最后使用生物素．亲和素酶联显色（ABs-ELISA）反应肉眼观察结果。结果：阳性和阴性对照探针显示正常。野生型探针和突变型探针能够分别特异性结合靶序列,并通过生物素和亲和索显色系统放大为一种肉眼可判断结果的检测形式。结论：建立了一种基于硝酸纤维素膜载体上进行核酸扩增的SNP检测方法。     

应用纳米金探针检测HSV-2的目视化基因芯片

本实验建立了一种应用金标链霉亲和素探针的目视化高灵敏度检测单纯疱疹病毒2型(HerpesSimplexVirus-2,HSV-2)的基因芯片。该芯片以HSV-2DNA聚合酶的高保守区为靶序列,设计HSV-2特异性引物和探针,通过PCR反应使扩增产物标记上生物素;氨基修饰的探针固定在活化的玻片上,与生物素标记的扩增产物杂交;利用生物素与链酶亲和素高亲合力的特性,加入纳米金标记的链酶亲和素后形成生物素-链酶亲和素-纳米金生物反应放大系统;银染反应后,达到目视化检测HSV-2效果。该HSV-2检测基因芯片能目视化检测出100fmol/L的HSV-2扩增产物,具有灵敏度高,低成本的特点,通过临床标本验证表明该芯片具有较高的准确性。     

应用纳米金探针检测HSV-2的目视化基因芯片

本实验建立了一种应用金标链霉亲和素探针的目视化高灵敏度检测单纯疱疹病毒2型(Herpes Simplex Virus-2, HSV-2)的基因芯片.该芯片以HSV-2 DNA 聚合酶的高保守区为靶序列,设计HSV-2特异性引物和探针,通过PCR反应使扩增产物标记上生物素;氨基修饰的探针固定在活化的玻片上,与生物素标记的扩增产物杂交;利用生物素与链酶亲和素高亲合力的特性,加入纳米金标记的链酶亲和素后形成生物素-链酶亲和素-纳米金生物反应放大系统;银染反应后,达到目视化检测HSV-2效果.该HSV-2检测基因芯片能目视化检测出100fmol/L的HSV-2扩增产物,具有灵敏度高,低成本的特点,通过临床标本验证表明该芯片具有较高的准确性.     

Novel helper phage design: intergenic region affects the assembly of bacteriophages and the size of antibody libraries

Abstract Phagemid vectors for display of proteins/peptides on the surface of filamentous phage utilize a plasmid genome carrying the phage origin of replication, along with the gene fused to a fragment of gene III. Generation of phage particles displaying the fusion protein also requires superinfection of the host bacterium with a helper virus. We describe here the construction of a new gene III mutant of M13 KO7 bacteriophage and compare its ability to act as helper phage with two mutants derived from Fd tet (fKN 16 and fCA 55). Furthermore, we investigate their capability to act as helper phages in SAP selection, where non-infectious helper phage, expressing antibody fragments but not protein 3, can still infect by first reacting with a soluble antigen-protein 3 fusion protein. Gene III mutants were found to be non-infectious, and high titers of infective particles were obtained only when the helper phage was grown in cells harbouring a gene III-containing plasmid. An amplification of the phage titer of 10⁶× was achieved in M13-derived phages, when used for the selection of specific antibody fragments.     

Phage display screening of TIGIT-specific antibody for antitumor immunotherapy

ABSTRACT

The fully synthetic humanized phage antibody library has the advantages including the minimized immunogenicity, which frequently happened in hybridoma cell-based antibody production. In this paper, using the constructed diverse complementarity determining region gene library and the germline gene as the backbone, we constructed eight single-chain antibody libraries and a combinatorial antibody library with a big capacity of 1.41 × 10¹⁰. M13EEA helper phage that was engineered from M13KO7 was applied to prepare phage antibody library. The eukaryotic expression of T-cell immune receptor with Ig and ITIM domain (TIGIT) antigen was used as a target antigen for screening. The screening of antigen-specific single-chain Fc-fused protein was performed through evaluation of binding affinity based on ELISA analysis. The IgG antibody was prepared with the screened single-chain protein. Finally, the CB3 antibody was screened out which exhibits the highest binding affinity with TIGIT with the K_d value of 8.155 × 10^?10 M.     

Dissociation-independent selection of high-affinity anti-hapten phage antibodies using cleavable biotin-conjugated haptens

The engineering of hapten-specific antibodies with affinity constant higher (K(a) values >10(10)M(-1)) than those of conventional antibodies promises hapten immunoassays exhibiting sub-femtomole range sensitivity, based on the conventional competitive assay principle. Here we report a simple method to select phage particles displaying anti-hapten antibody fragments with exceptionally high affinity. 11-Deoxycortisol (11-DC), selected as a model target hapten, was covalently conjugated to biotin via a spacer that included a reductively cleavable disulfide bond. Phage particles displaying high-affinity, single-chain Fv fragments (scFvs) specific for 11-DC (K(a)1.3 x 10(10)M(-1)) were incubated with the "cleavable biotin"-conjugated 11-DC, and the resulting complexes was captured on immobilized NeutrAvidin. Mild reductive conditions that did not decrease phage infectivity easily cleaved the disulfide bond, allowing the recovery of target phage particles; this process is fully independent of the dissociation of the antigen-antibody interaction. Five serial rounds of selection enabled the isolation and enrichment of the anti-11-DC phage (specific phage ratio >90%) from among a 100,000-fold excess of nonspecific phage particles. This method will be applicable for selection of extra-high-affinity phage antibodies against a wide variety of haptens.     

噬菌体抗体库的构建及抗乳腺癌细胞单链抗体的筛选

构建抗人乳腺癌细胞MCF 7的噬菌体单链抗体库 ,从中筛选MCF 7细胞特异性单链抗体。用MCF-7细胞免疫BALB C小鼠 ,取脾脏 ,提取总RNA ,用RT-PCR技术扩增小鼠抗体重链 (V_H)和轻链 (V_L)可变区基因 ,经重叠PCR(SOE-PCR) ,在体外将V_H和V_{L连接成单链抗体 (scFv)基因 ,并克隆到噬菌粒载体pCANTAB5E中 ,电转化至大肠杆菌TG1,经辅助噬菌体超感染 ,构建噬菌体单链抗体库。从该抗体库中筛选特异性识别MCF-7细胞的噬菌体单链抗体 ,将表面展示单链抗体的单克隆噬菌体转化大肠杆菌TOP10进行可溶性表达。成功地构建了库容为12×10⁶ 的抗MCF-7乳腺癌细胞的单链抗体库 ,初步筛选到了与MCF 7细胞特异性结合的scFv,Westernblot检测表明 ,在大肠杆菌TOP10中实现了单链抗体可溶性表达}     

A helper phage to improve single-chain antibody presentation in phage display

We show here that the number of single-chain antibody fragments (scFv) presented on filamentous phage particles generated with antibody display phagemids can be increased by more than two orders of magnitude by using a newly developed helper phage (hyperphage). Hyperphage have a wild-type pIII phenotype and are therefore able to infect F(+) Escherichia coli cells with high efficiency; however, their lack of a functional pIII gene means that the phagemid-encoded pIII-antibody fusion is the sole source of pIII in phage assembly. This results in an considerable increase in the fraction of phage particles carrying an antibody fragment on their surface. Antigen-binding activity was increased about 400-fold by enforced oligovalent antibody display on every phage particle. When used for packaging a universal human scFv library, hyperphage improved the specific enrichment factor obtained when panning on tetanus toxin. After two panning rounds, more than 50% of the phage were found to bind to the antigen, compared to 3% when conventional M13KO7 helper phage was used. Thus, hyperphage is particularly useful in stoichiometric situations, when there is little chance that a single phage will locate the desired antigen.     

Bioprocessing of bacteriophages via rapid drying onto microcrystals

We present an alternative bioprocess for bacteriophages involving room temperature coprecipitation of an aqueous mixture of phage (Siphoviridae) and a crystallizable carrier (glutamine or glycine) in excess of water miscible organic solvent (isopropanol or isobutanol). The resultant suspension of phage-coated microcrystals can be harvested by filtration and the residual solvent removed rapidly by air-drying at a relative humidity of 75%. Albumin or trehalose added at 5% w/w of the crystalline carrier provide for better stabilization of the phage during co-precipitation. Free-flowing dry powders generated from an aqueous solution of phage (～13 log(10) pfu/mL) can be reconstituted in the same aqueous volume to a phage titer of almost 10 log(10) pfu/mL; high enough to permit subsequent formulation steps following bioprocessing. The phage-coated microcrystals remain partially stable at room temperature for at least one month, which compares favorably with phage immobilized into polyester microcarriers or lyophilized with excipient (1-5% polyethylene glycol 6000 or 0.1-0.5 M sucrose). We anticipate that this bioprocessing technique will have application to other phage families as required for the development of phage therapies.     

Construction and characterization of phage display library: recognition of mouse serologically detected male (SDM) antigen

Improvement of animal embryo sexing depends upon high-titer serologically detected male (SDM) antibody fragments. SDM sera collected from isogenic C57BL/7 female mice after inoculation with male spleen cells were characterized and used for construction of a recombinant Fab antibody library against SDM antigen, and used for analysis of the binding capacity and specificity to SDM antigen. The heavy-chain Fd and full-length light-chain kappa were amplified by RT-PCR from a mouse (#6) that'ed high-titer antiserum. The amplified product was inserted into the pComb3 vector followed by co-infections with the help phage VCSM 13 for construction of the phage library, which gave 1.5x10(7) colonies with the titer of 3.2x10(11) pfu/ml by a recombination rate of 80%. Sequence analysis of the PCR products of plasmid DNA of E5 clones showed that V(H) and V(kappa) had common characteristics shared by other known variable region of antibodies. The Fab antibody libraries against SDM antigen were enriched by three cycles of affinity enrichment with male spleen cells, and two cycles of non-specific absorption with female spleen cells. The ELISA results showed that 9 of 15 clones had binding capacity to the SDM antigen. This is the first report on a phage display library of SDM antigen. The mouse Fab antibody library could be used for identifying SDM antigen, and for the development of sex determination of early embryos in mammals.     

Virus detection using filament-coupled antibodies

Two attractive features of ELISA are the specificity of antibody-antigen recognition and the sensitivity achieved by enzymatic amplification. This report describes the development of a non-enzymatic molecular recognition platform adaptable to point-of-care clinical settings and field detection of biohazardous materials. This filament-antibody recognition assay (FARA) is based on circumferential bands of antibody probes coupled to a 120 microm diameter polyester filament. One advantage of this design is that automated processing is achieved by sequential positioning of filament-coupled probes through a series of 25-60 microL liquid filled microcapillary chambers. This approach was evaluated by testing for the presence of M13KO7 bacterial virus using anti-M13KO7 IgG(1) monoclonal antibody coupled to a filament. Filament motion first positioned the antibodies within a microcapillary tube containing a solution of M13KO7 virus before moving the probes through subsequent chambers, where the filament-coupled probes were washed, exposed to a fluorescently labeled anti-M13K07 antibody, and washed again. Filament fluorescence was then measured using a flatbed microarray scanner. The presence of virus in solution produced a characteristic increase in filament fluorescence only in regions containing coupled antibody probes. Even without the enzymatic amplification of a typical ELISA, the presence of 8.3 x 10(8) virus particles produced a 30-fold increase in fluorescence over an immobilized negative control antibody. In an ELISA comparison study, the filament-based approach had a similar lower limit of sensitivity of approximately 1.7 x 10(7) virus particles. This platform may prove attractive for point-of-care settings, the detection of biohazardous materials, or other applications where sensitive, rapid, and automated molecular recognition is desired.     

抗鳗弧菌独特型单克隆抗体dsFv的构建及其噬菌体表面呈现

抗鳗弧菌独特型单克隆抗体 1E10是能够模拟鳗弧菌的保护性表位 ,可以作为疫苗使用的一种单克隆抗体 .利用基因工程抗体技术从抗鳗弧菌独特型单克隆抗体杂交瘤细胞株 1E10中克隆出抗体的重链及轻链可变区基因 (VH 和VL) .通过定点突变技术将VH4 4和VL10 5突变为半胱氨酸并且连接到噬菌体表达载体pCANTAB5E中 ,突变后的VH 和VL 基因位于cpⅢ先导序列和cpⅢ基因之间 ,在LacZ启动子调控之下 ,以融合蛋白的形式被导入细胞间隙 ,依靠链间二硫键组装成二硫键稳定型Fv抗体 (dsFv) .加入辅助噬菌体M13K0 7后 ,dsFv以融合蛋白的形式表达在噬菌体表面 .ELISA测定显示 :dsFv噬菌体能够与抗原结合并且这种结合呈噬菌体浓度依赖 .结果表明 :成功构建出了抗鳗弧菌独特型单克隆抗体dsFv基因并使其在噬菌体表面获得了正确呈现 .该dsFv噬菌体有望成为新一代基因工程疫苗用于预防鱼类鳗弧菌感染