A chemical-regulated inducible RNAi system in plants

Constitutive expression of an intron-containing self-complementary 'hairpin' RNA (ihpRNA) has recently been shown to efficiently silence target genes in transgenic plants. However, this technique cannot be applied to genes whose silencing may block plant regeneration or result in embryo lethality. To obviate these potential problems, we have used a chemical-inducible Cre/loxP (CLX) recombination system to trigger the expression of an intron-containing inverted-repeat RNA (RNAi) in plants. A detailed characterization of the inducible RNAi system in transgenic Arabidopsis thaliana and Nicotiana benthamiana plants demonstrated that this system is stringently controlled. Moreover, it can be used to induce silencing of both transgenes and endogenous genes at different developmental stages and at high efficiency and without any detectable secondary affects. In addition to inducing complete silencing, the RNAi can be produced at various times after germination to initiate and obtain different degrees of gene silencing. Upon induction, transgenic plants with genetic chimera were obtained as demonstrated by PCR analysis. Such chimeric plants may provide a useful system to study signaling mechanisms of gene silencing in Arabidopsis as well as other cases of long-distance signaling without grafting. The merits of using the inducible CLX system for RNAi expression are discussed.     

A novel multiplex cell viability assay for high-throughput RNAi screening

Cell-based high-throughput RNAi screening has become a powerful research tool in addressing a variety of biological questions. In RNAi screening, one of the most commonly applied assay system is measuring the fitness of cells that is usually quantified using fluorescence, luminescence and absorption-based readouts. These methods, typically implemented and scaled to large-scale screening format, however often only yield limited information on the cell fitness phenotype due to evaluation of a single and indirect physiological indicator. To address this problem, we have established a cell fitness multiplexing assay which combines a biochemical approach and two fluorescence-based assaying methods. We applied this assay in a large-scale RNAi screening experiment with siRNA pools targeting the human kinome in different modified HEK293 cell lines. Subsequent analysis of ranked fitness phenotypes assessed by the different assaying methods revealed average phenotype intersections of 50.7±2.3%-58.7±14.4% when two indicators were combined and 40-48% when a third indicator was taken into account. From these observations we conclude that combination of multiple fitness measures may decrease false-positive rates and increases confidence for hit selection. Our robust experimental and analytical method improves the classical approach in terms of time, data comprehensiveness and cost.     

Heat-inducible autolytic vector for high-throughput screening

In directed evolution, a high-throughput screening system is often a prerequisite for sampling the enzyme variants. When the target enzyme is expressed intracellularly, for example when Escherichia coli is used as the host, chemical or enzymatic disruption of cell membrane is often required in many cases, which can be tedious, time-consuming, and costly. In this study, a set of heat-inducible autolytic vectors were constructed to solve this problem, in which the SRRz lysis gene cassette from bacteriophage lambda was placed downstream of heat-inducible promoters, lambda cI857/pR promoter and its mutant, c1857/pR(M). The artificial autolytic units were inserted into the backbone of pUC18 (away from the multiple cloning sites). For the wild promoter; cI857/pR, the SRRz lysis cassette was expressed by temperature up-shift from 28 degrees to 38 degrees C, and the lysis efficiency of transformed bacterial cells was found to be consistent and could reach 96.3% as measured by the reporter beta3-galactosidase assay. In order to obtain a higher cell growth rate, the mutant promoter cI857/pR(M) was utilized to allow bacteria growth at 35 degrees C and lysis at 42 degrees C. However; this heat-inducible system showed significant inconsistency in terms of lysis efficiency. Bacillus subtilis 168 lipase A gene was further inserted into the multiple cloning sites of the autolytic vector containing cI857/pR, and 93.7% of the expressed lipase activity was found in the culture medium upon heat induction, demonstrating the utility of the vector for expression and rapid extracellular assay of heterologous enzymes.     

A recombineering based approach for high-throughput conditional knockout targeting vector construction

Functional analysis of mammalian genes in vivo is primarily achieved through analysing knockout mice. Now that the sequencing of several mammalian genomes has been completed, understanding functions of all the genes represents the next major challenge in the post-genome era. Generation of knockout mutant mice has currently been achieved by many research groups but only by making individual knockouts, one by one. New technological advances and the refinements of existing technologies are critical for genome-wide targeted mutagenesis in the mouse. We describe here new recombineering reagents and protocols that enable recombineering to be carried out in a 96-well format. Consequently, we are able to construct 96 conditional knockout targeting vectors simultaneously. Our new recombineering system makes it a reality to generate large numbers of precisely engineered DNA constructs for functional genomics studies.     

RNAi from plants to nematodes

Coincident with the award of the Nobel Prize for Medicine in 2006 to Fire and Mello for their discovery of RNAi, plant scientists have succeeded in using RNAi-based techniques to control nematodes, a hitherto unmanageable plant parasite. Recent work has demonstrated that the expression in a host plant of double-stranded RNA targeting housekeeping or parasitism genes in the root-knot nematode resulted in resistance to nematode infection.     

A new inducible RNAi xenograft model for assessing the staged tumor response to mTOR silencing

Human xenograft tumor models are widely used for efficacy evaluation of potential cancer targets. siRNA is usually stably introduced into tumor cells prior to transplantation. However, silencing of the cancer therapeutic target usually results in reduced cell growth/survival in vitro and/or failure to establish tumors in vivo, thus hindering tumor response-based efficacy evaluation. The present study explored a new tumor response model based on regulated RNAi, which is more relevant from a clinical standpoint. As a proof of principle, an inducible lentiviral RNAi vector was used to silence the known cancer therapeutic target mTOR upon induction with Doxycycline (DOX). The responses to DOX-induced mTOR silencing were tested both in vitro and in vivo for prostate cancer PC3 models. Significant reduction in cancer cell survival was observed due to cell cycle arrest and apoptosis when mTOR silencing was induced in vitro. mTOR silencing also caused tumor regression for the early-staged PC3 tumors (100% tumor regressed and 45% became tumor-free). The advanced-staged tumors also demonstrated significant responses (100% regressed). Therefore, our results demonstrate the powerful utility of this new inducible xenograft tumor model for efficacy evaluation of cancer targets, and it provides a direct in vivo efficacy validation of mTOR as a cancer therapeutic target.     

Canonical Wnt signaling: high-throughput RNAi widens the path

The canonical Wnt signaling pathway is highly conserved in evolution, widely used throughout animal development, and frequently hyperactive in cancer. Although Wnt signaling has been the subject of extensive genetic analysis in the past, some 200 genes have now been identified as candidate modulators of this pathway by a recent study using high-throughput RNAi screening.     

A high-throughput protocol for extracting high-purity genomic DNA from plants and animals

DNA extraction techniques that employ the reversible binding of DNA to silica via chaotropic salts can deliver high-quality genomic DNA from plant and animal tissues, while avoiding the use of toxic organic solvents. Existing techniques that use this method are either prohibitively expensive, or are applicable to only a restricted set of taxa. Here we describe a cost-effective DNA extraction technique suitable for a wide range of plant and animal taxa that yields microgram quantities of high-molecular-weight genomic DNA at a throughput of 192 samples per day. Our technique is particularly robust for tissue samples that are insoluble or are rapidly discoloured or oxidized in standard DNA extraction buffers. We demonstrate the quality of DNA extracted using this method by applying the amplified fragment length polymorphism technique to plant species.     

A gateway cloning vector set for high-throughput functional analysis of genes in planta

The current challenge, now that two plant genomes have been sequenced, is to assign a function to the increasing number of predicted genes. In Arabidopsis, approximately 55% of genes can be assigned a putative function, however, less than 8% of these have been assigned a function by direct experimental evidence. To identify these functions, many genes will have to undergo comprehensive analyses, which will include the production of chimeric transgenes for constitutive or inducible ectopic expression, for antisense or dominant negative expression, for subcellular localization studies, for promoter analysis, and for gene complementation studies. The production of such transgenes is often hampered by laborious conventional cloning technology that relies on restriction digestion and ligation. With the aim of providing tools for high throughput gene analysis, we have produced a Gateway-compatible Agrobacterium sp. binary vector system that facilitates fast and reliable DNA cloning. This collection of vectors is freely available, for noncommercial purposes, and can be used for the ectopic expression of genes either constitutively or inducibly. The vectors can be used for the expression of protein fusions to the Aequorea victoria green fluorescent protein and to the beta-glucuronidase protein so that the subcellular localization of a protein can be identified. They can also be used to generate promoter-reporter constructs and to facilitate efficient cloning of genomic DNA fragments for complementation experiments. All vectors were derived from pCambia T-DNA cloning vectors, with the exception of a chemically inducible vector, for Agrobacterium sp.-mediated transformation of a wide range of plant species.     

Constructs and methods for high-throughput gene silencing in plants

Gene silencing can be achieved by transformation of plants with constructs that express self-complementary (termed hairpin) RNA containing sequences homologous to the target genes. The DNA sequences encoding the self-complementary regions of hairpin (hp) RNA constructs form an inverted repeat. The inverted repeat can be stabilized in bacteria through separation of the self-complementary regions by a "spacer" region. When the spacer sequence encodes an intron, the efficiency of gene silencing is very high. There are at least three ways in which hpRNA constructs can be made. The construct may be generated from standard binary plant transformation vectors in which the hairpin-encoding region is generated de novo for each gene. Alternatively, generic gene-silencing vectors such as the pHANNIBAL and the pHELLSGATE series can be used. They simply require the insertion of PCR products, derived from the target gene, into the vectors by conventional cloning or by using the Gateway directed recombination system. In this article, we describe and evaluate the advantages of these vectors and then provide the protocols for their efficient use.     

A versatile vector system for multiple gene expression in plants

Today, cloning vectors that have been specifically designed to facilitate the fusion, overexpression or down-regulation of a variety of genes in plant cells are available from various sources. In most cases, their basic design allows the cloning of a single target gene, typically under a specific promoter, in parallel with the expression of selection and/or marker genes from the same vector. However, new and versatile systems now exist that expand the user's choice to a large number of promoters and terminators, and various autofluorescent tags confer the ability to express multiple genes from a single transformation vector.     

A tetracycline inducible expression vector for Corynebacterium glutamicum allowing tightly regulable gene expression

Here we report on the construction of a tetracycline inducible expression vector that allows a tightly regulable gene expression in Corynebacterium glutamicum which is used in industry for production of small molecules such as amino acids. Using the green fluorescent protein (GFP) as a reporter protein we show that this vector, named pCLTON1, is characterized by tight repression under non-induced conditions as compared to a conventional IPTG inducible expression vector, and that it allows gradual GFP synthesis upon gradual increase of anhydrotetracycline addition.     

A binary vector for transferring genomic libraries to plants.

The transformation of mutant plants with a complete recombinant library derived from wild-type DNA followed by assay of transformed plants for complementation of the mutant phenotype is a promising method for the isolation of plant genes. The small genome of Arabidopsis thaliana is a good candidate for attempting this so-called shotgun transformation. We present the properties of an A. thaliana genomic library cloned in a binary vector, pC22. This vector, designed to introduce genomic libraries into plants, contains the oriV of the Ri plasmid pRiHR1 by which it replicates perfectly stably in Agrobacterium. Upon transfer of the library from E. coli to A. tumefaciens large differences in transfer efficiencies of individual recombinant clones were observed. There is a direct relation between transfer efficiency and stability of the recombinant clones both in E. coli and A. tumefaciens. The stability is independent of the insert size, but seems to be related to the nature of the insert DNA. The feasibility of shotgun transformation and problems of statistical sampling are discussed.