Thermal responses of an insect subjected to temperature variations

Temperature responses of the cockroach, Blaberus craniifer, to rapid changes of ambient temperature (T_a) have been studied. In static conditions at T_a = 27°C the body-to-ambient temperature difference was only 0.10 ± 0.07°C. Two test situations were used, either a ramp increase of T_a from 27 to 31°C (0.1°C/min) or “step” changes from 27 to 28°C and back (0.5°C/min). In both cases body temperature closely followed Newtonian model, the body time constants measured in various conditions being very similar: 543 ± 99 sec in ramp tests, 550 ± 68 sec and 542 ± 124 sec in rising and falling step tests respectively. It is concluded that in spite of evident differences between the cockroach and an inert solid, the Newtonian model adequately represents the thermal responses of this insect to moderate changes in ambient temperature.     

MRI-based experimentations of fingertip flat compression: Geometrical measurements and finite element inverse simulations to investigate material property parameters

Modeling human-object interactions is a necessary step in the ergonomic assessment of products. Fingertip finite element models can help investigating these interactions, if they are built based on realistic geometrical data and material properties. The aim of this study was to investigate the fingertip geometry and its mechanical response under compression, and to identify the parameters of a hyperelastic material property associated to the fingertip soft tissues.Fingertip compression tests in an MRI device were performed on 5 subjects at either 2 or 4 N and at 15° or 50°. The MRI images allowed to document both the internal and external fingertip dimensions and to build 5 subject-specific finite element models. Simulations reproducing the fingertip compression tests were run to obtain the material property parameters of the soft tissues.Results indicated that two ellipses in the sagittal and longitudinal plane could describe the external fingertip geometry. The internal geometries indicated an averaged maximal thickness of soft tissues of 6.4 ± 0.8 mm and a 4 ± 1 mm height for the phalanx bone. The averaged deflections under loading went from 1.8 ± 0.3 mm at 2 N, 50° to 3.1 ± 0.2 mm at 4 N, 15°. Finally, the following set of parameters for a second order hyperelastic law to model the fingertip soft tissues was proposed: C₀₁ = 0.59 ± 0.09 kPa and C₂₀ = 2.65 ± 0.88 kPa.These data should facilitate further efforts on fingertip finite element modeling.     

Genetic aspects for the behaviour of lactating sows towards humans

With the keeping of lactating sows in loose housing systems, ensuring work safety for stockpersons is gaining importance. Aim of the present study was to develop tests characterising the behaviour of lactating sows in farrowing environments with more freedom to move. The behaviour towards humans in different management procedures was examined. Emphasis was given to integrate tests into daily routines. The study was conducted in a nucleus herd with 771 purebred Landrace sows. Data were collected from October 2016 until December 2018. Sows were kept in individual indoor pens with movable farrowing crates in which the animals were restrained from 7 days antepartum (ap) to an average of 7 days postpartum (pp). The Dummy Arm Test (DAT; 1444 observations) was used to assess the sows’ reaction towards a stockperson handling the piglets around day 4 pp (closed crates). With the Towel Test (TT; 2846 observations), the reaction of sows to a novel object and an unexpected situation was assessed. The Trough Cleaning Test (TCT; 2805 observations) described the sows’ response to common procedures such as trough cleaning. TT and TCT were conducted on days 3 pp (closed crates) and 10 pp (open crates). Variance components of behavioural traits were estimated univariately with a linear animal model, and genetic correlations between traits were derived using a multivariate animal model in ASreml 3.0. Most sows showed no or only a slight reaction to human interactions without attempting to attack them. However, a strong defensive reaction of sows was recorded in 4.0% (TCT), 4.5% (TT), and 10.7% (DAT) of observations. This behaviour of sows was observed more frequently in the open than in the closed pen system. Estimates of heritabilities (h² ± SE) were h² = 0.17 ± 0.05 for behaviour of sows towards humans (DAT), h² = 0.19 ± 0.04 for response of sows towards unexpected situations (TT), and h² = 0.13 ± 0.04 for reactions of animals to TCT. Genetic correlations (r_g ± SE) ranged from r_g = 0.59 ± 0.37 between TT and TCT to r_g = 0.77 ± 0.30 between TT and DAT. Our results show that the developed tests are suitable for assessing the behaviour of sows towards humans. Behavioural traits derived from these tests could be used as new phenotypes for the genetic selection of gentle and easy-to-handle sows. The genetic correlations of all tests studied were positive indicating related reaction patterns.     

Physiological and behavioral responses of horses during police training

Mounted police horses have to cope with challenging, unpredictable situations when on duty and it is essential to gain insight into how these horses handle stress to warrant their welfare. The aim of the study was to evaluate physiological and behavioral responses of 12 (six experienced and six inexperienced) police horses during police training. Horses were evaluated during four test settings at three time points over a 7-week period: outdoor track test, street track test, indoor arena test and smoke machine test. Heart rate (HR; beats/min), HR variability (HRV; root means square of successive differences; ms), behavior score (BS; scores 0 to 5) and standard police performance score (PPS; scores 1 to 0) were obtained per test. All data were statistically evaluated using a linear mixed model (Akaike's Information criterium; t > 2.00) or logistic regression (P < 0.05). HR of horses was increased at indoor arena test (98 ± 26) and smoke machine test (107 ± 25) compared with outdoor track (80 ± 12, t = 2.83 and t = 3.91, respectively) and street track tests (81 ± 14, t = 2.48 and t = 3.52, respectively). HRV of horses at the indoor arena test (42.4 ± 50.2) was significantly lower compared with street track test (85.7 ± 94.3 and t = 2.78). BS did not show significant differences between tests and HR of horses was not always correlated with the observed moderate behavioral responses. HR, HRV, PPS and BS did not differ between repetition of tests and there were no significant differences in any of the four tests between experienced and inexperienced horses. No habituation occurred during the test weeks, and experience as a police horse does not seem to be a key factor in how these horses handle stress. All horses showed only modest behavioral responses, and HR may provide complimentary information for individual evaluation and welfare assessment of these horses. Overall, little evidence of stress was observed during these police training tests. As three of these tests (excluding the indoor arena test) reflect normal police work, it is suggested that this kind of police work is not significantly stressful for horses and will have no negative impact on the horse's welfare.     

Non-genetic sources of variation of milk production and reproduction and interactions between both classes of traits in Sicilo-Sarde dairy sheep

This work aimed to study the sources of variation in productive and reproductive traits of the dairy Sicilo-Sarde ewes and to further investigate the interaction between both classes of traits. After edits, a database containing 5935 lactation records collected during 6 successive years in eight dairy flocks in the North of Tunisia was used. Total milked milk (TMM) in the milking-only period was retained as productive trait. The interval from the start of the mating period to the subsequent lambing (IML) and the lambing status (LS) were designed as reproductive traits. Sicilo-Sarde ewes had an average TMM of 60.93 l (±44.12) during 132.8 days (±46.6) after a suckling period of 100.4 days (±24.9). Average IML was 165.7 days. In a first step, the major factors influencing milk production and reproductive traits were determined. The significant sources of variation identified for TMM were: flock, month of lambing, year of lambing, parity, suckling length, litter size and milking-only length. Flock×month of the start of the mating period, parity, year of mating and litter size were identified as significant factors of variation for IML, while flock×month of the start of the mating period, parity and year of mating were identified as significant sources of variation for LS. In a second step, variance components were estimated using a three traits threshold mixed model, which combined LS as categorical trait and TMM and IML as continuous traits. Repeatability estimates were 0.21 (±0.03) for TMM, 0.09 (±0.02) for IML, and 0.10 (±0.05) for LS. Moreover, TMM and IML were found to be favorably associated for the flock× year of lambing effect (−0.45±0.18) but unfavorably associated for the animal effect (0.20±0.09).     

Effective tempo of the step test for dynamic balance ability in the elderly

This study aimed to examine the reliability and sex- and age-related differences of step tests with stipulated tempos as well as to clarify useful test parameters and tempos. One hundred forty elderly people and fifty young adults conducted tapping and stepping tests, matching the tempo provided by a metronome. Both tests involve movements where the subject touches a sheet with both the right and left hands or right and left legs at a designated spot. Evaluation parameters were the time difference between the beep sound and the time at which the sheet was touched in both tests as well as two-leg support and one-leg support times in the step test. The trial-to-trial reliability of the parameters in both tests was high. The time differences of both 40 bpm tests in the elderly were larger in males than in females. In the step test, the time difference and two-leg support times of the elderly were larger, in the order of 40, 60, and 120 bpm, and the one-leg support time was less in 40 bpm than 60 bpm or 120 bpm. The one-leg support time of the young subjects was larger, in the order of 40, 60, and 120 bpm. A significant age-related difference was found in the 40 bpm and 60 bpm test, and the time difference and two-leg support time were larger in the elderly while the one-leg support time was larger in the young subjects. The time difference at 40 bpm in the elderly was larger in the step test than in the tap test. There was no significant difference between both tests in the young subjects. In conclusion, the step test with the slow tempo, because it requires a long one-leg support phase, is effective for evaluating dynamic balance in the elderly. The time difference and two-leg and one-leg support times are effective evaluation parameters of the step test.     

The selectivity of a sequential extraction procedure for the determination of iron oxyhydroxides andiron sulfides in lake sediments

A popular sequential extraction procedure (Tessier et al. 1979) designed t o extract metals partitioned in various sediment phases, was evaluated for its selectivity. Amorphous FeOOH, FeS, and FeS₂ were added separately to natural lake sediments and sequentially extracted. The selectivity of the sequential procedure for the added solid phases was evaluated by determining the difference in the mass of Fe extracted from treated and control sediments. In the experiments where sulfide minerals were added, total S was measured in the residual solids in order to confirm selectivity of the method. Concentrations of total carbon remaining in the solid phase after each extraction step were also measured to determine the selectivity of the sequential procedure for carbon. The procedure was moderately selective for Fe added as FeOOH; a mean of 77 ± 12% (p < 0.05) of the Fe added was extracted in the step designed to reduce Fe-Mn oxyhydroxides. In experiments where FeS was added, a mean of 69 ± 11% (p < 0.05) of the Fe added as FeS was extracted in the fraction designed to oxidize sulfides and organic matter. Approximately 25% of the Fe added as FeS may have been extracted prematurely. Although less precise, total S analyses confirmed that much of the FeS was extracted in the oxidation step, yielding 104 ± 87% (p < 0.05) of the S added as FeS. The procedure was highly selective for FeS₂; 92 ± 14% (p < 0.05) of the Fe added as pyrite was extracted in the sulfide extraction step. Extraction of 80 ± 54% (p < 0.05) of S added as pyrite confirmed that FeS₂ were selectively extracted in the sulfide extraction step. Carbon in the sediments was also selectively extracted in the oxidation step (77 ± 2.4% of total C; p < 0.05). The applications and limitations of sequential extraction procedures as limnological research tools are discussed in light of our results. Request for offprints     

Rapid calorie metering inad lib rats

Adult wistar rats of either sex housed in individual cages and fedad lib were used to investigate the effects of calorie content and taste on ingestion. A 15 min single-choice solution (water, quinine, sucrose, saccharin) test as well as 1 h mixed diet (stock diet, sucrose-mixed, saccharin-mixed, quinine-mixed) tests were used. Calorically-rich sucrose either in solution or in mixed-diet was preferentially ingested. Tasteper se has not influenced calorie intake, as intake on sweet saccharin (3.4 ±0.4 cal) or on bitter quinine (3.3 ±0.6 cal) was similar to intake on stock diet (4.8 ±0.8 cal). Increased 5 min intake on sucrose solution (4.6 ±0.1 ml) over intake of other test solutions (saccharin 3.5 ±0.2 ml, quinine, 1.2 ±0.3 ml, water 2.1 ±0.1 ml) and calorie intake suppression on 1 h stock diet immediately following sucrose solution intake, indicate rapid calorie metering, probably based on fast-acting specific gustatory signals     

Enhancing gingival biotype through chorion membrane with innovative step in periodontal pocket therapy

A thick gingival biotype is a requisite for good periodontal health. It has important role in resisting trauma and subsequent gingival recession. The gingival thickness is a significant predictor of clinical outcome of periodontal surgeries. Various surgical procedures are used to increase the gingival thickness. The present study incorporated the innovative step of placement of chorion membrane to objectively evaluate the increase in thickness of gingival biotype during periodontal pocket therapy. The patients in age group between 25 and 45 years with chronic periodontitis, indicated for flap surgery were selected for the study. The sites with pocket depth of 6–8 mm in the mandibular anterior teeth were divided into test and control sites. Periodontal flap surgery was carried at both the sites and chorion membrane was placed at the test sites. The gingival thickness measurement was assessed using a markings marked on injection needle, these markings were read using digital vernier caliper, pre and post operatively. The baseline values of gingival thickness at test site (1.04 ± 0.19 at mid buccal region, 1.24 ± 0.20 at mid papillary) and control site (0.94 ± 0.11 at mid buccal region, 1.14 ± 0.11 at mid papillary region) showed no statistically significant difference. At test sites, 6 weeks post treatment (1.36 ± 0.16 at mid buccal region and 1.48 ± 0.17 at mid papillary region) as compared to control sites (1.06 ± 0.11 at mid buccal region, 1.24 ± 0.11 at mid papillary) showed statistically significant increase in gingival thickness (p ≤ 0.05*). The innovative step of placement of chorion membrane during periodontal pocket therapy facilitated increase in the gingival thickness in the areas with thin gingival biotype.     

Biochemical characterization of lysine auxotrophs of Staphylococcus aureus

Lysine biosynthesis in Staphylococcus aureus has been studied by use of a series of lysine auxotrophs. The strains were isolated after chemical mutagenesis. The majority of these mutant strains were classified according to the enzymatic step found to be deficient. Specific enzyme assays as well as nutritional tests were used to group the organisms. The enzymes included were dihydrodipicolinate synthetase, dihydrodipicolinate reductase, diaminopimelate epimerase, and diaminopimelate decarboxylase. The accumulation of diaminopimelate in certain mutants and the demonstration of dihydrodipicolinate synthetase and reductase provide the first detailed evidence that S. aureus utilizes the diaminopimelate pathway for lysine biosynthesis. A cell-free system was used to study the regulation of these enzymes with the exception of diaminopimelate epimerase. Lysine repressed all of the enzymes tested. The repression appeared to be coordinate in nature. The data presented provide suggestive evidence that the lysine biosynthetic region in S. aureus constitutes an operon.     

Tests with Daphnia magna: a new approach to prescreen toxicity of newly synthesized acetylcholinesterase reactivators

Reactivators of phosphorylated acetylcholinesterase (oximes) are substances used as a human antidotal therapy for organophosphate poisoning. The objective of our study was to examine if juveniles of freshwater microcrustacean Daphnia magna could be employed as test animals in early screen toxicity tests of those substances as a first step for further experiments with daphnids intoxicated by organophosphates. For this purpose, seven different oximes were investigated. It was found that toxicity of all tested oximes increased with time. Mono-quaternary oximes were approximately ten fold (EC50, 14.9 mg.l(-1)) more toxic in 24 hour tests and five fold (EC50 was 79.46 mg.l(-1)) more toxic in 48 hour tests than bis-quaternary oximes. Tests with daphnids were shown to be easy to carry out at low cost and provided valuable results which could be used as a starting point for further research.     

Separation of supercoiled from open circular forms of plasmid DNA,and biological activity detection

To establish a cost-effective purification process for the large-scale production of plasmid DNA for gene therapy and DNA vaccination, a single anion-exchange chromatography (AEC) step was employed to purify supercoiled plasmid DNA (sc pDNA) from other isoforms and Escherichia coli impurities present in a clarified lysate. Two different size and conformation plasmids were used as model targets, and showed similar elution behavior in this chromatographic operation, in which sc pDNA was effectively separated from open circle plasmid DNA (oc pDNA) in a salt gradient. The process delivered high-purity pDNA of homogeneity of 95 ± 1.1% and almost undetectable levels of endotoxins, genomic DNA, RNA and protein, at a yield of 65 ± 8%. Furthermore, the transfection efficiency (29 ± 0.4%) was significantly higher than that (20 ± 0.1%) of a pDNA control. The present study confirms the possibility of using a single AEC step to purify sc pDNA from other isoforms and host contaminants present in a clarified E. coli lysate.     

Effects of passive Bi-axial ankle stretching while walking on uneven terrains in older adults with chronic stroke

Many people with stroke experience foot drop while walking. Further, walking on uneven surfaces is a common fall risk for these people that hinder with their daily life activities. In addition, a few years after a stroke, lower-limb exercises become less focused, especially the ankle joint movement. The objective of this study is to determine the gait performance of older adults with chronic stroke on an uneven surface in relation to ankle mobility after a four-week bi-axial ankle range of motion (ROM) exercise session. Fifteen older adults with chronic post-stroke hemiparesis (N = 15; mean age = 65 years) participated in a total of 12 bi-axial ankle ROM exercises that consisted of three 30-min training sessions per week for four weeks. Basic clinical tests and gait performance in even and uneven surfaces were evaluated before and after training. Participants with chronic post-stroke hemiparesis showed significantly improved ankle functions, decreased ankle stiffness (from 0.140 ± 0.059 to 0.128 ± 0.067 N·m/°; p = 0.025), and increased paretic ankle passive ROMs (dorsiflexion(DF)/plantarflexion(PF): from 27.3 ± 14.7° to 50.6 ± 10.3°, p < 0.001; inversion(INV)/eversion(EV): 21.7 ± 9.7° to 28.6 ± 9.9°; p = 0.033) after training. They exhibited significant improvements in the walking performance over an uneven surface, step kinematics (walking speed 0.257 ± 0.17 to 0.320 ± 0.178 m/s; p = 0.017; step length: 0.214 ± 0.109 to 0.243 ± 0.108 m; p = 0.009), and clinical balance and mobility (Berg balance scale: 47.2 ± 4.7 to 50.1 ± 3.9, p = 0.0001; timed-up and go test: 23.9 ± 10.3 to 20.2 ± 7.0 s, p = 0.0156). This study is the first research to investigate the walking performance on uneven surfaces in the elderly with chronic stroke in relation to the ankle biomechanical property changes.     

Increasing step width reduces the requirements for subtalar joint moments and powers

The subtalar joint (STJ) contributes to the absorption and generation of mechanical energy (and power) during walking to maintain frontal plane stability. Previous observational studies have suggested that there may be a relationship between step width and STJ supination moment. This study directly tests the hypothesis that walking with a step width greater than preferred would reduce STJ moments, energy absorption, and power generation requirements, while increasing energy absorption at the hip during initial contact. Participants (n = 12, 7 females) were asked to walk on an instrumented treadmill at a constant velocity and cadence at a range of fixed step widths ranging from 0.1 to 0.4 times leg length (L). Walking at step widths greater than preferred (0.149 ± 0.04 L) reduced peak STJ moments at initial contact and propulsion which subsequently reduced the negative and positive work performed at the STJ. There was a 43% reduction in energy absorption (negative work) and approximately 30% decrease in positive work at the STJ as step width increased from 0.1 L to 0.4 L. An increase in energy absorption at the knee and hip was evident with an increase in step width during initial contact, although minimal mechanical changes were observed at the proximal joints during propulsion. These results suggest an increase in step width reduces the forces generated by muscles at the STJ across stance and is therefore likely to be beneficial in the prevention and treatment of their injuries. In terms of rehabilitation, the increase in mechanical costs occurring due to an increase in energy absorption by the hip and knee is of minimal concern.     

Selenium speciation in human milk with special respect to quality control

Selenium-(SE) organo compounds of pooled human milk (7th-14th d after delivery) were separated by centrifugation and subsequent size-exclusion chromatography (SEC) as described in ref. (1). The SEC fractions were used for Se determinations by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) in parallel to identification procedures of the organic ligands by two different capillary zone electrophoresis (CZE) methods. Further, the combination of isotachophoresis-(ITP) CZE with ETV-ICP-MS was used for final identifications. Mass balances were carried out at each analytical step for quality assurance. Reinjection experiments were performed to check the stability of Se-organo compounds during the analytical procedure. These quality-control experiments showed that no species transformations took place during the analytical procedure, and the Se species were native in human milk. The identification and quantification of organic ligands were clear and resulted in values of 2 (±0.2) mg/L GSH/GSeH, 2 (±0.22) mg/L cystamine/Se-cystamine, 4 (±0.4) mg/L cystine/ Se-cystine, and 1 (±0.18) mg/L methionine/Se-methionine. Unfortunately, a differentiation between sulfur (S) and Se analogs was not possible with the applied CE methods. The Se values per organic ligand were determined as 2.5 (±0.23) mg/L associated with GSH (as GSeH), 3.1 (±0.31) mg/L associated with cystamine (as Se-cystamine), 5.2 (±0.4) mg/L associated with cystine (as Se-cystine), and 1 (±0.1) mg/L associated with methionine (as Se-methionine).     

Elucidating Raw Material Variability—Importance of Surface Properties and Functionality in Pharmaceutical Powders

The purpose of this study is to illustrate, with a controlled example, the influence of raw material variability on the excipient’s functionality during processing. Soluble starch was used as model raw material to investigate the effect of variability on its compaction properties. Soluble starch used in pharmaceutical applications has undergone a purification procedure including washing steps. In this study, a lot of commercially available starch was divided into two parts. One was left intact and the other was subjected to an extra washing step. The two resulting lots were subjected to a series of physical characterization tests typical of those used to qualify raw materials. The two resulting lots gave virtually identical results from the tests. From the physical testing point of view, the two lots can be considered as two equivalent lots of the same excipient. However, when tested for their functionality when subjected to a compaction process, the two lots were found to be completely different. The compaction properties of the two lots were distinctly different under all environmental and processing conditions tested. From the functionality point of view, the two lots are two very different materials. The similar physical testing results but different functionality can be reconciled by considering the surface properties of the powders. It was found that the washing step significantly altered the surface energetic properties of the excipient. The washed lot consistently produced stronger compacts. These results are attributable to the measurably higher surface energy of induced by the additional washing step.     

Permutation – based statistical tests for multiple hypotheses

Background  

Genomics and proteomics analyses regularly involve the simultaneous test of hundreds of hypotheses, either on numerical or categorical data. To correct for the occurrence of false positives, validation tests based on multiple testing correction, such as Bonferroni and Benjamini and Hochberg, and re-sampling, such as permutation tests, are frequently used. Despite the known power of permutation-based tests, most available tools offer such tests for either t-test or ANOVA only. Less attention has been given to tests for categorical data, such as the Chi-square. This project takes a first step by developing an open-source software tool, Ptest, that addresses the need to offer public software tools incorporating these and other statistical tests with options for correcting for multiple hypotheses.     

Viscoelastic and failure properties of spine ligament collagen fascicles

The microstructural volume fractions, orientations, and interactions among components vary widely for different ligament types. If these variations are understood, however, it is conceivable to develop a general ligament model that is based on microstructural properties. This paper presents a part of a much larger effort needed to develop such a model. Viscoelastic and failure properties of porcine posterior longitudinal ligament (PLL) collagen fascicles were determined. A series of subfailure and failure tests were performed at fast and slow strain rates on isolated collagen fascicles from porcine lumbar spine PLLs. A finite strain quasi-linear viscoelastic model was used to fit the fascicle experimental data. There was a significant strain rate effect in fascicle failure strain (P < 0.05), but not in failure force or failure stress. The corresponding average fast-rate and slow-rate failure strains were 0.098 ± 0.062 and 0.209 ± 0.081. The average failure force for combined fast and slow rates was 2.25 ± 1.17 N. The viscoelastic and failure properties in this paper were used to develop a microstructural ligament failure model that will be published in a subsequent paper.     

Positioning Errors in Simple Targeted Movements of the Forearm Realized in the Absence of Visual Control: Effects of Vibrational Stimulation of Antagonist Muscles

In 17 healthy subjects, we examined the characteristics of targeted movements of the forearm, flexion from the initial position of full extension taken as 0 deg to a 50 deg target angle in the elbow joint (flexor tests, FTs) and extension from the initial angle of 100 deg to the same target angle (extensor tests, ETs) with return to the initial positions. A standard movement (its trajectory corresponded to a simple trapezium) was performed under conditions of visual feedback (the value of the target angle and trajectory of the movement were visualized on the screen of a monitor); then, this movement should be reproduced by the subject (according to an acoustic signal) in the absence of visual control. Target-reaching test movements in the absence of visual feedback differed from the standard ones in a higher velocity. Blindfold reproduction of standard movements realized under kinesthetic control was accompanied in all subjects by noticeable positive systematic errors of targeted positioning (in the group, on average, 5.16 ± 0.55 and 4.83 ± 0.58 deg under FT and ET conditions, respectively). Vibrational stimulation of the muscles whose activity mainly provided the movement and positioning (m. biceps brachii in the FT cases and m. triceps brachii in the case of ETs) resulted in decreases of the errors of kinesthetic positioning; intragroup means of these errors were 2.55 ± 0.36 deg (FTs) and 2.26 ± 0.40 deg (ETs). The positioning errors demonstrated even greater decreases upon vibrational stimulation of the muscles, which were relatively inactive under conditions of the tests and underwent passive stretching in the course of the movements (m. triceps in FTs and m. biceps in ETs). Mean intragroup values of the errors in these cases were 0.46 ± 0.25 and 0.52 ± 0.31 deg, respectively. The nature of systematic positioning errors in the reproduction of targeted movements in the absence of visual control and the mechanisms underlying the influence of vibrational stimulation of the muscles involved in realization of these movements on the positioning errors under kinesthetic control are discussed.     

Transient decreases in forelimb gait and ground reaction forces following rotator cuff injury and repair in a rat model

Due to inadequate healing, surgical repairs of torn rotator cuff tendons often fail, limiting the recovery of upper extremity function. The rat is frequently used to study rotator cuff healing; however, there are few systems capable of quantifying forelimb function necessary to interpret the clinical significance of tissue level healing. We constructed a device to capture images, ground reaction forces and torques, as animals ambulated in a confined walkway, and used it to evaluate forelimb function in uninjured control and surgically injured/repaired animals. Ambulatory data were recorded before (D–1), and 3, 7, 14, 28 and 56 days after surgery. Speed as well as step width and length were determined by analyzing ventral images, and ground reaction forces were normalized to body weight. Speed averaged 22±6 cm/s and was not affected by repair or time. Step width and length of uninjured animals compared well to values measured with our previous system. Forelimbs were used primarily for braking (?1.6±1.5% vs +2.5±0.6%), bore less weight than hind limbs (49±5% vs 58±4%), and showed no differences between sides (49±5% vs 46±5%) for uninjured control animals. Step length and ground reaction forces of the repaired animals were significantly less than control initially (days 3, 7 and 14 post-surgery), but not by day 28. Our new device provided uninjured ambulatory data consistent with our previous system and available literature, and measured reductions in forelimb function consistent with the deficit expected by our surgical model.