Ultra-Low Background DNA Cloning System

Yeast-based in vivo cloning is useful for cloning DNA fragments into plasmid vectors and is based on the ability of yeast to recombine the DNA fragments by homologous recombination. Although this method is efficient, it produces some by-products. We have developed an “ultra-low background DNA cloning system” on the basis of yeast-based in vivo cloning, by almost completely eliminating the generation of by-products and applying the method to commonly used Escherichia coli vectors, particularly those lacking yeast replication origins and carrying an ampicillin resistance gene (Amp^r). First, we constructed a conversion cassette containing the DNA sequences in the following order: an Amp^r 5′ UTR (untranslated region) and coding region, an autonomous replication sequence and a centromere sequence from yeast, a TRP1 yeast selectable marker, and an Amp^r 3′ UTR. This cassette allowed conversion of the Amp^r-containing vector into the yeast/E. coli shuttle vector through use of the Amp^r sequence by homologous recombination. Furthermore, simultaneous transformation of the desired DNA fragment into yeast allowed cloning of this DNA fragment into the same vector. We rescued the plasmid vectors from all yeast transformants, and by-products containing the E. coli replication origin disappeared. Next, the rescued vectors were transformed into E. coli and the by-products containing the yeast replication origin disappeared. Thus, our method used yeast- and E. coli-specific “origins of replication” to eliminate the generation of by-products. Finally, we successfully cloned the DNA fragment into the vector with almost 100% efficiency.     

An Alternative Method to Facilitate cDNA Cloning for Expression Studies in Mammalian Cells by Introducing Positive Blue White Selection in Vaccinia Topoisomerase I-Mediated Recombination

One of the most basic techniques in biomedical research is cDNA cloning for expression studies in mammalian cells. Vaccinia topoisomerase I-mediated cloning (TOPO cloning by Invitrogen) allows fast and efficient recombination of PCR-amplified DNAs. Among TOPO vectors, a pcDNA3.1 directional cloning vector is particularly convenient, since it can be used for expression analysis immediately after cloning. However, I found that the cloning efficiency was reduced when RT-PCR products were used as inserts (about one-quarter). Since TOPO vectors accept any PCR products, contaminating fragments in the insert DNA create negative clones. Therefore, I designed a new mammalian expression vector enabling positive blue white selection in Vaccinia topoisomerase I–mediated cloning. The method utilized a short nontoxic LacZα peptide as a linker for GFP fusion. When cDNAs were properly inserted into the vector, minimal expression of the fusion proteins in E. coli (harboring lacZΔM15) resulted in formation of blue colonies on X-gal plates. This method improved both cloning efficiency (75%) and directional cloning (99%) by distinguishing some of the negative clones having non-cording sequences, since these inserts often disturbed translation of lacZα. Recombinant plasmids were directly applied to expression studies using GFP as a reporter. Utilization of the P2A peptide allowed for separate expression of GFP. In addition, the preparation of Vaccinia topoisomerase I-linked vectors was streamlined, which consisted of successive enzymatic reactions with a single precipitation step, completing in 3 hr. The arrangement of unique restriction sites enabled further modification of vector components for specific applications. This system provides an alternative method for cDNA cloning and expression in mammalian cells.     

Evaluation of the efficiency and utility of recombinant enzyme-free seamless DNA cloning methods

Simple and low-cost recombinant enzyme-free seamless DNA cloning methods have recently become available. In vivo Escherichia coli cloning (iVEC) can directly transform a mixture of insert and vector DNA fragments into E. coli, which are ligated by endogenous homologous recombination activity in the cells. Seamless ligation cloning extract (SLiCE) cloning uses the endogenous recombination activity of E. coli cellular extracts in vitro to ligate insert and vector DNA fragments. An evaluation of the efficiency and utility of these methods is important in deciding the adoption of a seamless cloning method as a useful tool. In this study, both seamless cloning methods incorporated inserting DNA fragments into linearized DNA vectors through short (15–39 bp) end homology regions. However, colony formation was 30–60-fold higher with SLiCE cloning in end homology regions between 15 and 29 bp than with the iVEC method using DH5α competent cells. E. coli AQ3625 strains, which harbor a sbcA gene mutation that activates the RecE homologous recombination pathway, can be used to efficiently ligate insert and vector DNA fragments with short-end homology regions in vivo. Using AQ3625 competent cells in the iVEC method improved the rate of colony formation, but the efficiency and accuracy of SLiCE cloning were still higher. In addition, the efficiency of seamless cloning methods depends on the intrinsic competency of E. coli cells. The competency of chemically competent AQ3625 cells was lower than that of competent DH5α cells, in all cases of chemically competent cell preparations using the three different methods. Moreover, SLiCE cloning permits the use of both homemade and commercially available competent cells because it can use general E. coli recA^? strains such as DH5α as host cells for transformation. Therefore, between the two methods, SLiCE cloning provides both higher efficiency and better utility than the iVEC method for seamless DNA plasmid engineering.     

High-throughput cloning of human liver complete open reading frames using homologous recombination in Escherichia coli

In this article, we describe a high-throughput cloning method, seamless enzyme-free cloning (SEFC), which allows one-step assembly of DNA fragments in vivo via homologous recombination in Escherichia coli. In the method, the desired open reading frame (ORF) is amplified by use of ORF-specific primers with flanking sequences identical to the two ends of a linearized vector. The polymerase chain reaction (PCR) product and the linearized vector are then cotransformed into E. coli cells, where the ORF is incorporated into the vector in vivo. SEFC is a simple, reliable, and inexpensive method of cloning in which PCR fragments are fused into expression vectors without unwanted amino acids or extra in vitro manipulations apart from the single PCR amplification step. Using this method, we successfully cloned human liver complete ORFs into the yeast AD and DB vectors and generated a clone resource of 4964 AD-ORFs and 4676 DB-ORFs in 3 months. This approach will be useful for daily DNA cloning and for creating proteome-scale clone resources.     

Restoration of Gene Function by Homologous Recombination: from PCR to Gene Expression in One Step

We have developed a simple method for single-step cloning of any PCR product into a plasmid. A novel selection principle has been applied, in which activation of a drug selection marker is achieved following homologous recombination. In this method a DNA fragment is amplified by PCR with standard oligonucleotides that contain flanking tails derived from the host plasmid and the complete λP_R or rrnA1 promoter regions. The resulting PCR product is then electroporated into an Escherichia coli strain harboring both the phage λ Red functions and the host plasmid. Upon homologous recombination of the PCR fragment into the plasmid, expression of a drug selection marker is fully induced due to restoration of its truncated promoter, thus allowing appropriate selection. Recombinant plasmid vectors encoding β-galactosidase and neomycin phosphotransferase were constructed by using this method in two well-known Red systems. This cloning strategy significantly reduces both the time and costs associated with cloning procedures.     

Simple Method for Markerless Gene Deletion in Multidrug-Resistant Acinetobacter baumannii

The traditional markerless gene deletion technique based on overlap extension PCR has been used for generating gene deletions in multidrug-resistant Acinetobacter baumannii. However, the method is time-consuming because it requires restriction digestion of the PCR products in DNA cloning and the construction of new vectors containing a suitable antibiotic resistance cassette for the selection of A. baumannii merodiploids. Moreover, the availability of restriction sites and the selection of recombinant bacteria harboring the desired chimeric plasmid are limited, making the construction of a chimeric plasmid more difficult. We describe a rapid and easy cloning method for markerless gene deletion in A. baumannii, which has no limitation in the availability of restriction sites and allows for easy selection of the clones carrying the desired chimeric plasmid. Notably, it is not necessary to construct new vectors in our method. This method utilizes direct cloning of blunt-end DNA fragments, in which upstream and downstream regions of the target gene are fused with an antibiotic resistance cassette via overlap extension PCR and are inserted into a blunt-end suicide vector developed for blunt-end cloning. Importantly, the antibiotic resistance cassette is placed outside the downstream region in order to enable easy selection of the recombinants carrying the desired plasmid, to eliminate the antibiotic resistance cassette via homologous recombination, and to avoid the necessity of constructing new vectors. This strategy was successfully applied to functional analysis of the genes associated with iron acquisition by A. baumannii ATCC 19606 and to ompA gene deletion in other A. baumannii strains. Consequently, the proposed method is invaluable for markerless gene deletion in multidrug-resistant A. baumannii.     

Rapid and Robust PCR-Based All-Recombinant Cloning Methodology

We report here a PCR-based cloning methodology that requires no post-PCR modifications such as restriction digestion and phosphorylation of the amplified DNA. The advantage of the present method is that it yields only recombinant clones thus eliminating the need for screening. Two DNA amplification reactions by PCR are performed wherein the first reaction amplifies the gene of interest from a source template, and the second reaction fuses it with the designed expression vector fragments. These vector fragments carry the essential elements that are required for the fusion product selection. The entire process can be completed in less than 8 hours. Furthermore, ligation of the amplified DNA by a DNA ligase is not required before transformation, although the procedure yields more number of colonies upon transformation if ligation is carried out. As a proof-of-concept, we show the cloning and expression of GFP, adh, and rho genes. Using GFP production as an example, we further demonstrate that the E. coli T7 express strain can directly be used in our methodology for the protein expression immediately after PCR. The expressed protein is without or with 6xHistidine tag at either terminus, depending upon the chosen vector fragments. We believe that our method will find tremendous use in molecular and structural biology.     

A novel approach for the construction of plant amiRNA expression vectors

Artificial microRNA (amiRNA) technology has been applied in Arabidopsis thaliana and other plants to efficiently silence target genes of interest. Here we described a novel approach to construct plant amiRNA expression vectors with seamless enzyme-free cloning (SEFC) and mating-assisted genetically integrated cloning (MAGIC). Two pairs of primers were designed when the loop of amiRNA precursor was longer than 60 bp while three oligonucleotides were used to amplify the linearized vector containing the amiRNA precursor whose loop was smaller than 60 bp. The PCR products were transformed into Escherichia coli to generate the donor plasmid containing the amiRNA expression cassette through homologous recombination in vivo. The amiRNA expression cassette was then transferred to the recipient plasmid via MAGIC and an amiRNA expression plasmid was created. More than 200 amiRNA expression vectors were generated with this approach, three of which have been transformed into A. thaliana and successfully silence the target genes. Given its low-cost and simplicity, this novel approach of plant amiRNA expression vectors construction will benefit the study of individual gene function and establishment of plant amiRNA libraries.     

Cloning and maintenance of the housefly sodium channel gene using low copy number vector and two sequential host strains

In spite of the long history of recombinant DNA technology, some genes have not been successfully cloned in Escherichia coli. This is probably due to the toxic effects of the expressed foreign gene product on E. coli. In initial attempts to clone the full-length Vssc1 voltage-sensitive sodium channel α-subunit gene from houseflies, we used one of the most popular vectors and hosts but were unable to retrieve any intact clone. By using two vectors with different copy numbers and two alternate E. coli host strains, we found that the combined use of a low copy number vector (pALTER-1) and an E. coli host strain that suppresses plasmid replication (ABLE-K) is essential to obtain intact full-length Vssc1 clone. However, since the ABLE-K strain was not a suitable host for the long-term maintenance of Vssc1 gene due to its recombination-positive genotype, it was necessary to transfer the Vssc1 plasmid from the primary host to a secondary host with a recombination-minus genotype (Stbl2) to minimize the chances of deletion or rearrangement. We believe that this cloning strategy, with a low copy number vector and the sequential use of two E. coli strains, will be also applicable for the cloning of other toxic genes.     

An efficient method of constructing homologous recom binant baculovirus with PCR-amplified fragments

This paper describes a rapid method of constructing homologous recombinant baculovirus inE. coli with PCR-amplified fragments. By using this method, the traditional steps of constructing transfer vector are omitted. The method is based on phage λ red system which can promote the recombination between the homologous fragments with the length above 36 bp. Taking HaSNPV as an example, this paper describes the rapid recombination process by using chloramphenicol resistance gene (Cm ^R ) to replaceorf135 in HaSNPV genome. A pair of primers with length of 60 bp was synthesized, in which 40 bp was homologous to the each end sequence oforf135, and the rest 20 bp was homologous to the each end sequence ofCm ^R . By using these primers, a linear fragment containing the completeCm ^R gene between 40 bp of homologous arms oforf135 was generated by PCR with the plasmid pKD3 which containsCm ^R as the template. By transforming the linear fragment into theE. coli containing the bacterial artificial chromosome of HaSNPV and with the help of a plasmid expressing λ recombinase, the recombinants on which the homologue replacement had taken place were selected by chloramphenicol resistance. This method greatly shortens the process of constructing recombinant baculovirus since the process was performed inE. coli and does not need to construct transfer vectors. It can be further used for gene replacement and gene deletion of other large viral genomes.     

An ‘instant gene bank’ method for gene cloning by mutant complementation

We describe a new method of gene cloning by complementation of mutant alleles which obviates the need for construction of a gene library in a plasmid vector in vitro and its amplification in Escherichia coli. The method involves simultaneous transformation of mutant strains of the fungus Aspergillus nidulans with (i) fragmented chromosomal DNA from a donor species and (ii) DNA of a plasmid without a selectable marker gene, but with a fungal origin of DNA replication (‘helper plasmid’). Transformant colonies appear as the result of the Joining of chromosomal DNA fragments carrying the wild-type copies of the mutant allele with the helper plasmid. Joining may occur either by ligation (if the helper plasmid is in linear form) or recombination (if it is cccDNA). This event occurs with high efficiency in vivo, and generates an autonomously replicating plasmid cointegrate. Transformants containing Penicillium chrysogenum genomic DNA complementing A. nidulans niaD, nirA and argB mutations have been obtained. While some of these cointegrates were evidently rearranged or consisted only of unaltered replicating plasmid, in other cases plasmids could be recovered into E. coli and were subsequently shown to contain the selected gene. The utility of this “instant gene bank” technique is demonstrated here by the molecular cloning of the P. canescens trpC gene.     

Efficient integrative transformation of the phytopathogenic fungus Alternaria alternata mediated by the repetitive rDNA sequences

An attempt was made to transform Alternaria alternata protoplasts using a plasmid vector, pDH25, bearing the Escherichia coli hygromycin B (Hy) phosphotransferase gene (hph) under the control of the Aspergillus nidulans trpC promoter. Transformants arose on a selective medium containing 100 μg Hy/ml. There were two types of transformants, forming large and small colonies on the selective medium. Transformation with one μg of the vector produced an average of 4.5 large colonies and 600 small ones. In large-colony transformants, the vector often integrated into the recipient chromosome in the form of highly rearranged tandem arrays. To increase transformation efficiency, fragments of the highly repetitive ribosomal RNA gene cluster (rDNA) of A. alternata were used to construct four new vectors for homologous recombination system. Use of these vectors gave higher transformation efficiency than the original plasmid. The best vector, pDH25r1a, gave rise to large-colony transformants at a frequency 20 times higher than pDH25. Transformation events in A. alternata with pDH25r1a occured by homologous recombination as a single crossover between the plasmid-borne rDNA segment and its homologue in the chromosome, often giving rise to tandemly repeated vector DNA.     

A simple and ultra-low cost homemade seamless ligation cloning extract (SLiCE) as an alternative to a commercially available seamless DNA cloning kit

The seamless ligation cloning extract (SLiCE) method is a novel seamless DNA cloning tool that utilizes homologous recombination activities in Escherichia coli cell lysates to assemble DNA fragments into a vector. Several laboratory E. coli strains can be used as a source for the SLiCE extract; therefore, the SLiCE-method is highly cost-effective.The SLiCE has sufficient cloning ability to support conventional DNA cloning, and can simultaneously incorporate two unpurified DNA fragments into vector. Recently, many seamless DNA cloning kits have become commercially available; these are generally very convenient, but expensive. In this study, we evaluated the cloning efficiencies between a simple and highly cost-effective SLiCE-method and a commercial kit under various molar ratios of insert DNA fragments to vector DNA. This assessment identified that the SLiCE from a laboratory E. coli strain yielded 30?85% of the colony formation rate of a commercially available seamless DNA cloning kit. The cloning efficiencies of both methods were highly effective, exhibiting over 80% success rate under all conditions examined. These results suggest that SLiCE from a laboratory E. coli strain can efficiently function as an effective alternative to commercially available seamless DNA cloning kits.     

One step construction of PCR mutagenized libraries for genetic analysis by recombination cloning

Recombination cloning encompasses a set of technologies that transfer gene sequences between vectors through site-specific recombination. Due in part to the instability of linear DNA in bacteria, both the initial capture and subsequent transfer of gene sequences is often performed using purified recombination enzymes. However, we find linear DNAs flanked by loxP sites recombine efficiently in bacteria expressing Cre recombinase and the lambda Gam protein, suggesting Cre/lox recombination of linear substrates can be performed in vivo. As one approach towards exploiting this capability, we describe a method for constructing large (>1 × 10⁶ recombinants) libraries of gene mutations in a format compatible with recombination cloning. In this method, gene sequences are cloned into recombination entry plasmids and whole-plasmid PCR is used to produce mutagenized plasmid amplicons flanked by loxP. The PCR products are converted back into circular plasmids by transforming Cre/Gam-expressing bacteria, after which the mutant libraries are transferred to expression vectors and screened for phenotypes of interest. We further show that linear DNA fragments flanked by loxP repeats can be efficiently recombined into loxP-containing vectors through this same one-step transformation procedure. Thus, the approach reported here could be adapted as general cloning method.     

鼠伤寒沙门菌spvBC基因编辑株的构建

利用λRed重组系统和pBAD原核表达载体构建鼠伤寒沙门菌spvBC质粒毒力基因修饰菌株,为深入探究沙门菌毒力基因spv的功能和致病机制及宿主抗感染免疫提供工具菌。以pKD4为模板,PCR扩增含spvBC同源臂的卡那霉素抗性基因以构建同源打靶片段,再将其电转入含有质粒pKD46的鼠伤寒沙门菌中进行同源重组,随后将质粒pCP20电转导入阳性转化子,消除卡那霉素抗性基因,PCR鉴定敲除株的构建。PCR扩增含酶切位点的spvBC基因片段,扩增产物与原核表达载体pBAD/gⅢ分别双酶切后连接构建pBAD-spvBC重组质粒,PCR筛选阳性菌落并测序鉴定。将构建成功的pBAD-spvBC重组质粒电转导入spvBC敲除株中,Western blot测定不同浓度L-阿拉伯糖诱导SpvB和SpvC蛋白表达情况。PCR结果表明鼠伤寒沙门菌spvBC基因敲除成功;PCR及测序结果表明pBAD-spvBC重组质粒构建成功,Western blot结果表明13 mmol/L L-阿拉伯糖可诱导SpvB和SpvC蛋白正常表达。λRed重组系统可用于沙门菌质粒上大片段基因的敲除,pBAD原核表达载体可用于沙门菌质粒上大片段基因的回补,丰富了细菌质粒的基因修饰和编辑策略。     

Phenotypic Expression of PCR-Generated Random Mutations in a Pseudomonas putida Gene after Its Introduction into an Acinetobacter Chromosome by Natural Transformation

Localized sets of random point mutations generated by PCR amplification can be transferred efficiently to the chromosome of Acinetobacter ADP1 (also known as strain BD413) by natural transformation. The technique does not require cloning of PCR fragments in plasmids: PCR-amplified DNA fragments are internalized by cells and directly incorporated into their genomes by homologous recombination. Previously such procedures for random mutagenesis could be applied only to Acinetobacter genes affording the selection of mutant phenotypes. Here we describe the construction of a vector and recipient that allow for mutagenesis, recovery, and expression of heterologous genes that may lack a positive selection. The plasmid carries an Acinetobacter chromosomal segment interrupted by a multiple cloning site next to a kanamycin resistance marker. The insertion of heterologous DNA into the multiple cloning site prepares the insert as a target for PCR mutagenesis. PCR amplifies the kanamycin resistance marker and a flanking region of Acinetobacter DNA along with the insert of heterologous DNA. Nucleotide sequence identity between the flanking regions and corresponding chromosomal segments in an engineered Acinetobacter recipient allows homologous recombination of the PCR-amplified DNA fragments into a specific chromosomal docking site from which they can be expressed. The recipient strain contains only a portion of the kanamycin resistance gene, so donor DNA containing both this gene and the mutagenized insert can be selected by demanding growth of recombinants in the presence of kanamycin. The effectiveness of the technique was demonstrated with the relatively GC-rich Pseudomonas putida xylE gene. After only one round of PCR amplification (35 cycles), donor DNA produced transformants of which up to 30% carried a defective xylE gene after growth at 37°C. Of recombinant clones that failed to express xylE at 37°C, about 10% expressed the gene when grown at 22°C. The techniques described here could be adapted to prepare colonies with an altered function in any gene for which either a selection or a suitable phenotypic screen exists.     

A novel vector for direct cloning PCR fragments by positive selection based on the lethal <Emphasis Type="Italic">barnase</Emphasis>

A novel vector for direct PCR fragments cloning by positive selection, pBN, was constructed based on the lethal barnase from Bacillus amyloliquefaciens. Barnase was modified by inserting an additional insert at a pivotal Ile-54 site, which could take crucial affect on protein structure and absolute activity. The lacZ’ expressing cassette of pUC19 was replaced by the modified barnase under the NptIII promoter. This novel vector could exist in large quantities as pUC19 in E. coli hosts. For the direct cloning PCR fragments, the positive selective vector was prepared by linearizing pBN with EcoRV to cut off the additional insert. PCR fragments with different length were prepared to verify this vector by ligation with this vector. The results showed that this positive selective vector for PCR fragment cloning was higher efficient and more convenient in manipulation than previous positive vectors.     

FabV/Triclosan Is an Antibiotic-Free and Cost-Effective Selection System for Efficient Maintenance of High and Medium -Copy Number Plasmids in Escherichia coli

Antibiotic resistance genes and antibiotics are frequently used to maintain plasmid vectors in bacterial hosts such as Escherichia coli. Due to the risk of spread of antibiotic resistance, the regulatory authorities discourage the use of antibiotic resistance genes/antibiotics for the maintenance of plasmid vectors in certain biotechnology applications. Overexpression of E. coli endogenous fabI gene and subsequent selection on Triclosan has been proposed as a practical alternative to traditional antibiotic selection systems. Unfortunately, overexpression of fabI cannot be used to select medium –copy number plasmids, typically used for the expression of heterologous proteins in E. coli. Here we report that Vibrio cholera FabV, a functional homologue of E. coli FabI, can be used as a suitable marker for the selection and maintenance of both high and medium -copy number plasmid vectors in E. coli.     

Direct selection of recombinant plasmids with chlorate

A pair of small plasmid vectors have been constructed, which complement chlorate-resistant chlB mutants of Escherichia coli to chlorate reduction under anaerobic conditions. This potentially lethal function can be inactivated by the insertion of DNA fragments into a multiple cloning site. After transformation of competent mutant cells with a ligation mixture, simultaneous selection for the plasmid-coded drug resistance and for the inactivation of the complementing gene directly yields colonies, which harbor recombinant plasmids. It is demonstrated that this cloning system can be used with an efficiency beyond 90%. Vector sequences are provided.