Recyclable antibacterial magnetic nanoparticles grafted with quaternized poly(2-(dimethylamino)ethyl methacrylate) brushes

Highly efficient recyclable antibacterial magnetite nanoparticles consisting of a magnetic Fe(3)O(4) core with an antibacterial poly(quaternary ammonium) (PQA) coating were prepared in an efficient four-step process. The synthetic pathway included: (1) preparation of Fe(3)O(4) nanoparticles via coprecipitation of Fe(2+)/Fe(3+) in the presence of an alkaline solution; (2) attachment of an ATRP initiating functionality to the surface of the nanoparticles; (3) surface-initiated atom transfer radical polymerization (ATRP) of 2-(dimethylamino)ethyl methacrylate (DMAEMA); and (4) transformation of PDMAEMA brushes to PQA via quaternization with ethyl bromide. The success of the surface functionalization was confirmed by FT-IR, thermal gravimetric analysis (TGA), elemental analysis, and transmission electron microscopy (TEM). The PQA-modified magnetite nanoparticles were dispersed in water and exhibited a response to an external magnetic field, making the nanoparticles easy to remove from water after antibacterial tests. The PQA-modified magnetite nanoparticles retained 100% biocidal efficiency against E. coli (10(5) to 10(6)E. coli/mg nanoparticles) during eight exposure/collect/recycle procedures without washing with any solvents or water.     

Core-shell Au nanoparticle formation with DNA-polymer hybrid coatings using aqueous ATRP

We report here a direct surface-grafting approach to forming DNA-containing polymer shells outside of Au nanoparticles using aqueous atom transfer radical polymerization (ATRP). In this approach, DNA molecules were immobilized on Au particles to introduce ATRP initiators on the surface. The same DNA molecules also acted as particle stabilizers through electrostatic repulsion and allowed particles to stay suspended in water. The immobilized ATRP initiators prompted polymer chain growth under certain conditions to form thick polymer shells outside of the particles. The formation of DNA-polymer hybrids outside of Au nanoparticles was characterized using absorption spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), and gel electrophoresis. The presence of thick polymer shells improved particle stability in high ionic strength media, whereas particles with the DNA coating only aggregated. A visible color difference between these two particle solutions was clearly observed, providing the basis for DNA sensing in homogeneous solutions.     

Dual-responsive magnetic core-shell nanoparticles for nonviral gene delivery and cell separation

We present the synthesis of dual-responsive (pH and temperature) magnetic core-shell nanoparticles utilizing the grafting-from approach. First, oleic acid stabilized superparamagnetic maghemite (γ-Fe(2)O(3)) nanoparticles (NPs), prepared by thermal decomposition of iron pentacarbonyl, were surface-functionalized with ATRP initiating sites bearing a dopamine anchor group via ligand exchange. Subsequently, 2-(dimethylamino)ethyl methacrylate (DMAEMA) was polymerized from the surface by ATRP, yielding dual-responsive magnetic core-shell NPs (γ-Fe(2)O(3)@PDMAEMA). The attachment of the dopamine anchor group on the nanoparticle's surface is shown to be reversible to a certain extent, resulting in a grafting density of 0.15 chains per nm(2) after purification. Nevertheless, the grafted NPs show excellent long-term stability in water over a wide pH range and exhibit a pH- and temperature-dependent reversible agglomeration, as revealed by turbidimetry. The efficiency of γ-Fe(2)O(3)@PDMAEMA hybrid nanoparticles as a potential transfection agent was explored under standard conditions in CHO-K1 cells. Remarkably, γ-Fe(2)O(3)@PDMAEMA led to a 2-fold increase in the transfection efficiency without increasing the cytotoxicity, as compared to polyethyleneimine (PEI), and yielded on average more than 50% transfected cells. Moreover, after transfection with the hybrid nanoparticles, the cells acquired magnetic properties that could be used for selective isolation of transfected cells.     

Cellular response to magnetic nanoparticles "PEGylated" via surface-initiated atom transfer radical polymerization

A new method to PEGylate magnetic nanoparticles with a dense layer of poly(poly(ethylene glycol) monomethacrylate) (P(PEGMA)) by surface-initiated atom transfer radical polymerization (ATRP) is reported. In this approach, an initiator for ATRP was first immobilized onto the magnetic nanoparticle surface, and then P(PEGMA) was grafted onto the surface of magnetic nanoparticle via copper-mediated ATRP. The modified nanoparticles were subjected to detailed characterization using FTIR, XPS, and TGA. The P(PEGMA)-immobilized nanoparticles dispersed well in aqueous media. The saturation magnetization values of the P(PEGMA)-immobilized nanoparticles were 19 emu/g and 11 emu/g after 2 and 4 h polymerization respectively, compared to 52 emu/g for the pristine magnetic nanoparticles. The response of macrophage cells to pristine and P(PEGMA)-immobilized nanoparticles was compared. The results showed that the macrophage cells are very effective in cleaning up the pristine magnetic nanoparticles. With the P(PEGMA)-immobilized nanoparticles, the amount of nanoparticles internalized into the cells is greatly reduced to <2 pg/cell over a 5 day period. With this amount of nanoparticles uptake, no significant cytotoxicity effects were observed.     

Paclitaxel-loaded poly(gamma-glutamic acid)-poly(lactide) nanoparticles as a targeted drug delivery system against cultured HepG2 cells

The study was to develop paclitaxel-loaded formulations using a novel type of self-assembled nanoparticles that was composed of block copolymers synthesized from poly(gamma-glutamic acid) and poly(lactide) via a simple coupling reaction. The nanoparticles (the NPs) were prepared with various feed weight ratios of paclitaxel to block copolymer (the P/BC ratio). The morphology of all prepared nanoparticles was spherical and the surfaces were smooth. Increasing the P/BC ratio significantly increased the drug loading content of the prepared nanoparticles, but remarkably reduced the drug loading efficiency. The release rate of paclitaxel from the NPs decreased significantly as the P/BC ratio increased. For the potential of targeting liver cancer cells, galactosamine was further conjugated on the prepared nanoparticles (the Gal-NPs) as a targeting moiety. It was found that the activity in inhibiting the growth of HepG2 cells (a liver cancer cell line) by the Gal-NPs was comparable to that of a clinically available paclitaxel formulation, while the NPs displayed a significantly less activity. This may be attributed to the fact that the Gal-NPs had a specific interaction with HepG2 cells via ligand-receptor recognition. Cells treated with distinct paclitaxel formulations resulted in arrest in the G2/M phase. The arrest of cells in the G2/M phase was highly suggestive of interference by paclitaxel with spindle formation and was consistent with the morphological findings presented herein. In conclusion, the active targeting nature of the Gal-NPs prepared in the study may be used as a potential drug delivery system for the targeted delivery to liver cancers.     

Comb polymers prepared by ATRP from hydroxypropyl cellulose

Hydroxypropyl cellulose (HPC) was used as a core molecule for controlled grafting of monomers by ATRP, the aim being to produce densely grafted comb polymers. HPC was either allowed to react with an ATRP initiator or the first generation initiator-functionalized 2,2-bis(methylol)propionic acid dendron to create macroinitiators having high degrees of functionality. The macroinitiators were then "grafted from" using ATRP of methyl methacrylate (MMA) or hexadecyl methacrylate. Block copolymers were obtained by chain extending PMMA-grafted HPCs via the ATRP of tert-butyl acrylate. Subsequent selective acidolysis of the tert-butyl ester moieties was performed to form a block of poly(acrylic acid) resulting in amphiphilic block copolymer grafts. The graft copolymers were characterized by 1H NMR and FT-IR spectroscopies, DSC, TGA, rheological measurements, DLS, and tapping mode AFM on samples spin coated upon mica. It was found that the comb (co)polymers were in the nanometer size range and that the dendronization had an interesting effect on the rheological properties.     

Aggregate formation and radiolytic degradation of amphiphilic DNA block copolymer possessing disulfide bond

We have designed a novel aggregate of DNA block copolymer (DBC) that is sensitive to hypoxic X-irradiation. The DBC consists of tetrahydropyrane-protected 2-hydroxyethyl methacrylate as a hydrophobic unit and oligodeoxynucleotides as a hydrophilic unit, which are linked to a radiation-sensitive disulfide bond. The DBC self-assembled efficiently to form aggregates that encapsulated small molecules such as nile red and pyrene. Hypoxic X-irradiation could then induce reductive degradation of the DBC aggregates via an exchange reaction of the disulfide bond to release guest molecules.     

Synthesis of amphiphilic star block copolymers and their evaluation as transdermal carriers

Amphiphilic star polymers offer substantial promise for a range of drug delivery applications owing to their ability to encapsulate guest molecules. One appealing but underexplored application is transdermal drug delivery using star block copolymer reverse micelles as an alternative to the more common oral and intravenous routes. We prepared 6- and 12-arm amphiphilic star copolymers via atom transfer radical polymerization (ATRP) of sequential blocks of polar oligo (ethylene glycol)methacrylate and nonpolar lauryl methacrylate from brominated dendritic macroinitiators based on 2,2-bis(hydroxymethyl) propionic acid. These star block copolymers demonstrate the ability to encapsulate polar dyes such as rhodamine B and FITC-BSA in nonpolar media via UV/vis spectroscopic studies and exhibit substantially improved encapsulation efficiencies, relative to self-assembled "1-arm" linear block copolymer analogs. Furthermore, their transdermal carrier capabilities were demonstrated in multiple dye diffusion studies using porcine skin, verifying penetration of the carriers into the stratum corneum.     

Synthesis, characterization, and bioavailability of mannosylated shell cross-linked nanoparticles

Saccharide-functionalized shell cross-linked (SCK) polymer micelles designed as polyvalent nanoscaffolds for selective interactions with receptors on Gram negative bacteria were constructed from mixed micelles composed of poly(acrylic acid-b-methyl acrylate) and mannosylated poly(acrylic acid-b-methyl acrylate). The mannose unit was conjugated to the hydrophilic chain terminus of the amphiphilic diblock copolymer precursor, from which the SCK nanoparticles were derived, by the growth of the diblock copolymer from a mannoside functionalized atom transfer radical polymerization (ATRP) initiator. Mixed micelle formation between the amphiphilic diblock copolymer and mannosylated amphiphilic diblock copolymer was followed by condensation-based cross-linking between the acrylic acid residues present in the periphery of the polymer micelles to afford SCK nanoparticles. SCKs presenting variable numbers of mannose functionalities were prepared from mixed micelles of controlled stoichiometric ratios of mannosylated and nonmannosylated diblock copolymers. The polymer micelles and SCKs were characterized by dynamic light scattering (DLS), electrophoretic light scattering, atomic force microscopy (AFM), transmission electron microscopy (TEM), and analytical ultracentrifugation (AU). Surface availability and bioactivity of the mannose units were evaluated by interactions of the nanostructures with the model lectin Concanavalin A via DLS studies, with red blood cells (rabbit) via agglutination inhibition assays and with bacterial cells (E. coli) via TEM imaging.     

Immobilization of proteins on magnetic nanoparticles

Magnetic nanoparticles prepared from an alkaline solution of divalent and trivalent iron ions could covalently bind protein via the activation ofN-ethyl-N-(3-dimethylaminopropyl) carbodiimide (EDC). Trypsin and avidin were taken as the model proteins for the formation of protein-nanoparticle conjugates. The immobilized yield of protein increased with molar ratio of EDC/nanoparticle. Higher concentrations of added protein could yield higher immobilized protein densities on the particles. In contrast to EDC, the yields of protein immobilization via the activation of cyanamide were relatively lower. Nanoparticles bound with avidin could attach a single-stranded DNA through the avidin-biotin interaction and hybridize with a DNA probe. The DNA hybridization was confirmed by fluorescence microscopy observations. Immobilized DNA on nanoparticles by this technique may have widespread applicability to the detection of specific nucleic acid sequence and targeting of DNA to particular cells.     

Glucose-responsive vehicles containing phenylborate ester for controlled insulin release at neutral pH

This study is devoted to developing amphiphilic block polymers based on phenylborate ester, which can self-assemble to form nanoparticles, as a glucose-sensitive drug carrier. Poly(ethylene glycol)-block-poly[(2-phenylboronic esters-1,3-dioxane-5-ethyl) methylacrylate] (MPEG5000-block-PBDEMA) was fabricated with MPEG5000-Br as a macroinitiator via atom transfer radical polymerization (ATRP). Using the solvent evaporation method, these block polymers can disperse in aqueous milieu to self-assemble into micellar aggregates with a spherical core-shell structure. Zeta potential and fluorescence techniques analysis showed a good purification effect, high encapsulation efficiency, and loading capacity of fluorescein isothiocyanate (FITC)-insulin-loaded polymeric micelles under optimal conditions. The in vitro insulin release profiles revealed definite glucose-responsive behavior of the polymeric micelles at pH 7.4 and 37 °C, depending on the environmental glucose concentration and the chemical composition of the block polymers. Further, circular dichroism spectroscopy demonstrated that the overall tertiary structure of the released insulin was in great agreement with standard insulin. (1)H NMR results of the polymeric micelles during glucose-responsive process supposed one possible insulin release mechanism via the polymer polarity transition from amphiphilic to double hydrophilic. The analysis of L929 mouse fibroblast cells viability suggested that the polymeric micelles from MPEG5000-block-PPBDEMA had low cell toxicity. The block polymers containing phenylborate ester that responded to changes in the glucose concentration at neutral pH are being aimed for use in self-regulated insulin delivery.     

Investigation of the interaction between DNA and cobalt ferrite nanoparticles by FTIR spectroscopy

The interaction of DNA with nanoparticles of cobalt ferrite powder prepared by the mechano-chemical method was studied. It was shown that CoFe₂O₄ nanoparticles efficiently bind DNA in aqueous solutions (Tris-HCl), forming a bionanocomposite. The adsorption capacity of CoFe₂O₄ nanoparticles for DNA was evaluated to be 5.25 × 10⁻³ mol/m². The desorption of DNA from the surface of the particles was analyzed while changing the pH, the ionic strength, and the chemical content of the medium. The DNA-CoFe₂O₄ nanocomposite was investigated by FTIR spectroscopy. The block of the data allowed one to consider the mechanism of the interaction between a polynucleotide and CoFe₂O₄ nanoparticles and to make the assumption that the binding occurred due to the coordination interaction of the phosphate groups and heterocyclic bases of DNA (oxygen atoms of thymine and guanine) with metal ions on the particle surface. The analysis of the IR spectra showed that binding can lead to the partial destabilization of the DNA structure, with the B conformation of a polynucleotide being preserved.     

Protein-polymer nanoparticles for nonviral gene delivery

Protein-polymer conjugates were investigated as nonviral gene delivery vectors. BSA-poly(dimethylamino) ethyl methacrylate (PDMA) nanoparticles (nBSA) were synthesized using in situ atom transfer radical polymerization (in situ ATRP) and BSA as a macroinitiator. The diameter and charge of nBSA was a function of the ATRP reaction time and ranged from 5 to 15 nm and +8.9 to +22.5, respectively. nBSA were able to condense plasmid DNA (pDNA) and form polyplexes with an average diameter of 50 nm. nBSA/pDNA polyplexes transfected cells with similar efficiencies or better as compared to linear and branched PEI. Interestingly, the nBSA particle diameter and charge did not affect pDNA complexation and transgene expression, indicating that the same gene delivery efficiency can be achieved with lower charge ratios. We believe that with the use of protein-polymer conjugates additional functionality could be introduced to polyplexes by using different protein cores and, thus, they pose an interesting alternative to the design of nonviral gene delivery vectors.     

Vesicles from peptidic side-chain polymers synthesized by atom transfer radical polymerization

Block copolymers can adopt a wide range of morphologies in dilute aqueous solution. There is a significant amount of interest in the use of block copolymer vesicles for a number of applications. We show that a series of oligo(valine) and oligo(phenylalanine) peptides coupled to a methacrylic group can be prepared by conventional peptide coupling techniques. These can be successfully polymerized by atom transfer radical polymerization (ATRP) in hexafluoroisopropanol (HFIP) giving access to poly(ethylene oxide)- b-poly(side-chain peptides). Many of these polymers self-assemble to form vesicles using an organic to aqueous solvent exchange. One example with a divaline hydrophobic block gives a mixture of toroids and vesicles. Circular dichroism demonstrates that secondary structuring is observed in the hydrophobic region of the vesicle walls for the valine side-chain containing polymers.     

Synthesis and application of a novel, crystalline phosphoramidite monomer with thiol terminus, suitable for the synthesis of DNA conjugates

A new, crystalline 5'-thiol modifier phosphoramidite monomer (3), suitable for DNA synthesis, has been prepared. This monomer has been built into an oligonucleotide using the standard protocol. After cleavage, purification and removal of the trityl group with Ag(+), a free 5'-thiol terminal oligonucleotide (15) has been obtained which was subsequently coupled to a cysteine derivative via a disulfide bridge to afford conjugate 16.     

Synthesis of novel folic acid-functionalized biocompatible block copolymers by atom transfer radical polymerization for gene delivery and encapsulation of hydrophobic drugs

Two synthetic routes to folic acid (FA)-functionalized diblock copolymers based on 2-(methacryloyloxy)ethyl phosphorylcholine [MPC] and either 2-(dimethylamino)ethyl methacrylate [DMA] or 2-(diisopropylamino)ethyl methacrylate [DPA] were explored. The most successful route involved atom transfer radical polymerization (ATRP) of MPC followed by the tertiary amine methacrylate using a 9-fluorenylmethyl chloroformate (Fmoc)-protected ATRP initiator. Deprotection of the Fmoc groups produced terminal primary amine groups, which were conjugated with FA to produce two series of novel FA-functionalized biocompatible block copolymers. Nonfunctionalized MPC-DMA diblock copolymers have been previously shown to be effective synthetic vectors for DNA condensation; thus, these FA-functionalized MPC-DMA diblock copolymers appear to be well suited to gene therapy applications based on cell targeting strategies. In contrast, the FA-MPC-DPA copolymers are currently being evaluated as pH-responsive micellar vehicles for the delivery of highly hydrophobic anticancer drugs.     

PCL film surfaces conjugated with P(DMAEMA)/gelatin complexes for improving cell immobilization and gene transfection

Successful gene transfection on a tissue scaffold is of crucial importance in facilitating tissue repair and regeneration by enabling the localized production of therapeutic drugs. Polycaprolactone (PCL) has been widely adopted as a scaffold biomaterial, but its unfavorable cell-adhesion property needs to be improved. In this work, the PCL film surface was conjugated with poly((2-dimethyl amino)ethyl methacrylate) (P(DMAEMA))/gelatin complexes via surface-initiated atom transfer radical polymerization (ATRP) for improving cell immobilization and subsequent gene transfection. A simple aminolysis-based method was first used for the covalent immobilization of ATRP initiators on the PCL film. Well-defined P(DMAEMA) brushes were subsequently prepared via surface-initiated ATRP from the initiator-functionalized PCL surfaces. The P(DMAEMA) chains with a pK(a) of 7.0-7.3 were used for conjugating gelatin with a pI of 4.7 via electrostatic interaction. The amount of complexed gelatin increased as that of the grafted P(DMAEMA) layer. The cell-adhesion property on the functionalized PCL surface could be controlled by adjusting the ratio of P(DMAEMA)/gelatin. It was found that the gene transfection property on the immobilized cells was dependent on the density of the immobilized cells on the functionalized PCL film. With the good cell-adhesive nature of gelatin and the efficient gene transfection on the dense immobilized cells, the incorporating the suitable of P(DMAEMA)/gelatin complexes onto PCL surfaces could endow the PCL substrates new and interesting properties for potential tissue engineering applications.     

DNAzyme-functionalized Pt nanoparticles/carbon nanotubes for amplified sandwich electrochemical DNA analysis

A novel DNAzyme-functionalized Pt nanoparticles/carbon nanotubes (DNAzyme/Pt NPs/CNTs) bioconjugate was fabricated as trace tag for ultrasensitive sandwich DNA detection. The Pt NPs/CNTs were prepared via layer-by-layer (LBL) assembly of the Pt NPs and polyelectrolyte on the carboxylated CNTs, followed by the functionalization with the DNAzyme and reporter probe DNA through the platinum-sulfur bonding. The subsequent sandwich-type DNA specific reaction would confine numerous DNAzyme/Pt NPs/CNTs bioconjugate onto the gold electrode surface for amplifying the signal. In the presence of 3,3',5,5' tetramethylbenzidine (TMB) which could be oxidized by the DNAzyme, electrochemical signals could be generated by chronoamperometry via the interrogation of reduction electrochemical signal of oxidized TMB. The constructed DNA sensor exhibited a wide linear response to target DNA ranging from 1.0fM to 10pM with the detection limit down to 0.6fM and exhibited excellent selectivity against even a single base mismatch. In addition, this novel DNA sensor showed fairly good reproducibility, stability, and reusability.     

DNA-decorated nanoparticles as nanosensors for rapid detection of ascorbic acid

We designed an assay for rapid detection of ascorbic acid (AA) with a DNAzyme cleaving its DNA substrate in the presence of Cu(2+) and AA. The sensor consists of two DNA strands that form a complex between each other. The 5'-end of the DNAzyme binds the substrate DNA via Watson-Crick bonding and the 3'-end binds through formation of a DNA-triplex via Hoogsteen hydrogen bonding. The substrate DNA was prepared by two different methods. In the first case the nucleic acid was modified with fluorescein/dabcyl FRET pair across the cleavage site. In the second case the nucleic acid modified with fluorescein was immobilised on gold nanoparticles. DNAzyme contains a loop forming a complex with Cu(2+) ions. The oxidation of ascorbic acid (AA) with oxygen yields hydrogen peroxide. The latter interacts with Cu(2+) to give hydroxyl radicals. They break substrate DNA in close vicinity to the copper/DNA complex to separate fluorescein from gold nanoparticles leading to the increase in fluorescence intensity. Use of substrate DNA modified with the fluorescein/dabcyl couple allowed to measure AA concentration within 3 min with the detection limit of 2.5 μM. Employment of gold nanoparticles decorated with fluorescein-modified DNA allowed to improve the detection limit of AA quantification by two orders of magnitude due to enhanced cleavage of DNA catalysed by Au clusters. Fructose, sucrose, glucose, urea, and citric acid did not interfere with our assay even at concentration of 1mM. Good selectivity allowed us to apply our rapid and sensitive assays to detection of AA in vitamin C tablets, urine and orange juice.