Bacteriophage lambda repressor allelic modulation of the Rex exclusion phenotype

The sensitivity of delta red-gam delta ren mutants of bacteriophage lambda to Rex exclusion by lambda rexA+ rexB+ lysogens is modulated by the prophage cI repressor allele. We show the following: (i) lambda spi156 delta nin5 forms plaques on a cI+-rexA+-rexB+ lysogen with 10(5)-fold higher efficiency than on cI[Ts]-rexA+-rexB+ derivatives. (ii) The cI[Ts]857 allele augmentation of Rex exclusion is recessive to cI+. (iii) The cI857-mediated increase in Rex exclusion activity involves the participation of a genetic element mapping outside of cI-rexA-rexB.     

Over-expression of rexA nullifies T4rII exclusion in Escherichia coli K(lambda) lysogens

Dosage and relative cellular levels of RexA and RexB proteins encoded by the rexA-rexB genes of a lambda prophage are important for the Rex+ phenotype, which was nullified when greater RexA or RexB was provided than was necessary for the complementation of a rexA- or a rexB- prophage.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

The rex genes of bacteriophage lambda can inhibit cell function without phage superinfection

The rexA and rexB genes of bacteriophage lambda are expressed from the prophage and cause the exclusion of many superinfecting mutant phages. We cloned the rexA and rexB genes into a multicopy plasmid so that they were overexpressed from the inducible tac promoter. No obvious phenotypes were associated with overexpressing both rexA and rexB or overexpressing rexA in the absence of rexB expression. However, induction of rexA in the presence of limiting rexB activity caused an immediate cessation of cell growth. All macromolecular synthesis abruptly ceased and amino acid transport was severely inhibited. Intracellular levels of adenosine 5'-triphosphate also dropped. These phenotypes are similar to those observed after phage superinfection, leading us to propose that at least some of the exclusion caused by the Rex proteins could be due to a change in their ratio following superinfection.     

Analysis of the Escherichia coli proBA locus by DNA and protein sequencing

A 2.9 kb DNA fragment carrying the Escherichia coli proBA region, which encodes the first two enzymes of the proline biosynthetic pathway, was subcloned onto an expression plasmid carrying both the bacteriophage lambda PL promoter (lambda PL) and the lambda gene encoding a thermolabile cI repressor protein (cI857). Derepression of the lambda PL promoter by thermal inactivation of the cI857 repressor protein resulted in the simultaneous overproduction of the proB (gamma-glutamyl kinase) and proA (gamma-glutamyl phosphate reductase) gene products. Nucleotide sequence analysis of the proBA locus allowed gene assignments consistent with the NH2 and COOH-terminal analyses and amino acid compositions of homogeneous preparations of the proB and proA proteins. The contiguous nature of the proB and proA genes suggests that the two genes constitute an operon in which proB precedes proA.     

Streptomyces marker plasmids for monitoring survival and spread of streptomycetes in soil.

Plasmid constructs pNW1 through pNW6 containing a controllable xylE gene (for catechol 2,3-dioxygenase) were introduced into Streptomyces lividans strains to provide a selectable marker system. xylE functions in S. lividans under the control of bacteriophage lambda promoters lambda pL and lambda pR. Thermoregulated expression of xylE is provided through the lambda repressor cI857. Catechol 2,3-dioxygenase activity was increased 2.8-fold from plasmid construct pNW2 (lambda pL, xylE, cI857) and 9.5- and 7.4-fold from constructs pNW3 (lambda pR, xylE, cI857) and pNW5 (lambda pR, xylE, cI857), respectively, when the temperature was shifted from 28 degrees C to 37 degrees C. The stability of the constructs varied from 4.7% for pNW2 to 99.4% for pNW4 (lambda pL, xylE) over two rounds of sporulation. Marked S. lividans strains released into soil systems retained the XylE phenotype for more than 80 days, depending on the marker plasmid, when examined by a selective plating method. Furthermore, S. lividans harboring plasmid pNW5 was detectable by nucleic acid hybridization at less than 10 CFU g-1 (dry weight) of soil as mycelium and 10(3) CFU g-1 (dry weight) of soil as spores with the xylE marker DNA extracted from soil and amplified by using the polymerase chain reaction.     

A 'phase-shift' fusion system for the regulation of foreign gene expression by lambda repressor in gram-negative bacteria

A 'phase-shift' translation fusion vector was constructed in which mutually compatible restriction sites BamHI, BclI and BglII are positioned in such a manner that the cut point is in a different reading frame, immediately following the ATG start codon and ribosome-binding site of the lambda cro gene. The lambda cro gene is expressed from promoter pR and controlled by a thermosensitive (cI857) lambda repressor. The usefulness of the expression vector was demonstrated using a galK gene lacking the ATG start codon and fusing this to the pR promoter and ATG start codon of the lambda cro gene, resulting in cI857-regulated expression of galactokinase. The vector is of general use for foreign gene expression in Escherichia coli when the target gene has a compatible cohesive end (5'-GATC-3') at the N terminus (provided, for example, by a BamHI linker). The lambda cI857-pR-cro-galK cassette was cloned into pJRD215, a wide-host-range plasmid and transferred by conjugation to a variety of Gram-negative bacteria. In all cases, thermosensitive regulation of galactokinase could be demonstrated, though the levels of induction varied considerably. These results show that the powerful lambda pR promoter and the efficient lambda repressor can be used to regulate expression of foreign genes in Gram-negative organisms other than E. coli.     

Method for selection of transposable DNA and characterization of a new insertion sequence, IS493, from Streptomyces lividans.

A method to select for transposable elements from Streptomyces spp. by using insertional inactivation of a repressor gene that functions in Escherichia coli was developed. Plasmid pCZA126, which can replicate in Streptomyces spp. or E. coli, contains a gene coding for the lambda cI857 repressor and a gene, under repressor control, coding for apramycin resistance. E. coli cells containing the plasmid are apramycin sensitive but become apramycin resistant if the cI857 repressor gene is disrupted. Plasmids propagated in Streptomyces spp. can be screened for transposable elements that have disrupted the cI857 gene by transforming E. coli cells to apramycin resistance. This method was used to isolate a new 1.6-kilobase insertion sequence, IS493, from Streptomyces lividans CT2. IS493 duplicated host DNA at the target site, had inverted repeats at its ends, and contained two tandem open reading frames on each strand. IS493 was present in three copies in the same genomic locations in several S. lividans strains. Two of the copies appeared to be present in regions of similar DNA context that extended at least 11.5 kilobases. Several other Streptomyces spp. did not appear to contain copies of IS493.     

Altered temperature induction sensitivity of the lambda pR/cI857 system for controlled gene E expression in Escherichia coli

Cell lysis of Gram-negative bacteria can be efficiently achieved by expression of the cloned lysis gene E of bacteriophage PhiX174. Gene E expression is tightly controlled by the rightward lambda pR promoter and the temperature-sensitive repressor cI857 on lysis plasmid pAW12. The resulting empty bacterial cell envelopes, called bacterial ghosts, are currently under investigation as candidate vaccines. Expression of gene E is stringently repressed at temperatures up to 30 degrees C, whereas gene E expression, and thus cell lysis, is induced at temperatures higher than 30 degrees C due to thermal inactivation of the cI857 repressor. As a consequence, the production of ghosts requires that bacteria have to be grown at 28 degrees C before the lysis process is induced. In order to reflect the growth temperature of pathogenic bacteria in vivo, it seemed favorable to extend the heat stability of the lambda pR promoter/cI857 repressor system, allowing pathogens to grow at 37 degrees C before induction of lysis. In this study we describe a mutation in the lambda pR promoter, which allows stringent repression of gene E expression at temperatures up to 36 degrees C, but still permits induction of cell lysis at 42 degrees C.     

Complementation of the lytD1 mutation of Escherichia coli by either the cI or cro gene of bacteriophage lambda.

The lytD1 mutant of Escherichia coli exhibits temperature-sensitive growth which is attributed to cellular autolysis at the restrictive temperature. Either of two cloned phage lambda genes, identified as cI and cro, suppressed the lytD1(Ts) lysis phenotype, suggesting that lytD encodes a DNA-binding protein with a DNA-binding specificity similar to that of CI and Cro. LytD may be a repressor of a gene(s) involved in cellular autolysis.     

Selective retention of recombinant plasmids coding for human insulin

Plasmids may be lost from Escherichia coli K-12 hosts that are cultured without selection for plasmid retention. This is particularly true for chimeric plasmids that incorporate genes for human insulin into vectors derived from pBR322. The cIts857 gene of bacteriophage lambda was inserted into the bla gene of the human-insulin-coding plasmids, pIA7 delta 4 delta 1, pIB7 delta 4 delta 1 and pHI7 delta 4 delta 1, generating the new plasmids pPR17, pPR18 and pPR19, respectively, which produced the thermosensitive lambda repressor. The cI gene was downstream from the pM and pbla promoters, so that it may have been expressed from either or both promoters. Separate E. coli K-12 RV308 host strains containing the new recombinants were lysogenized with the repressor-defective bacteriophage lambda cI90. Loss of the plasmid from the lysogens causes concomitant loss of the lambda repressor and cell death, because the prophage is induced to enter the lytic growth cycle. The system effectively forces retention of the plasmid in all viable cells in the culture.     

IS Elements in Bacteriophage Lambda Gene cI Prevent Expression of Gene rex

IS5 inserted into gene cI of bacteriophage lambda greatly reduces the synthesis of Rex protein. Two other IS insertions in cI are even more polar, but two amber mutations near the 5' end of cI allow normal expression of Rex.     

Endpoint distribution for deletions into imm lambda region forming p lambda CM replicons: phage lambda gene rex affects plasmid establishment

For the p lambda CM family of lambda-derived self-encapsidating plasmids, the rexB gene product facilitates plasmid establishment following injection into a new host cell. Temperature-stable chloramphenicol resistance (CmR at 40 degrees C) conferred by low-multiplicity infection with lambda::Tn9 cI857 lysates (Tn9 sites tested: 22.60 or 24.08 kb, in the b region, or 28.41 kb, in int) is usually due to a lambda::Tn9 plasmid (p lambda CM) formed by a deletion penetrating the lambda immunity region. These grow either as plasmids in the absence of, or lytic phages in the presence of N function supplied by a host such as lambda cI857 delta H1 lysogen MS1449. The 'groplaque' (plaque-shaped growth spot) assay, which selects for CmR growth in an MS1449 lawn at 32 degrees C after an initial plaquing period at 37 degrees C, reveals two distinguishable classes of p lambda CM isolates. All variants whose deletions extend into or beyond rexB give rise to visible CmR growth only after the temperature shift to 32 degrees C, and thus produce a hollow-centered 'donut' type of groplaque. In contrast, 16 out of 17 variants whose deletions fall short of rexB produce 'solid' groplaques which appear before the temperature shift. Tests of T4rII phage exclusion show the exceptional 17th variant to be Rex-, confirming the identification of rex as the lambda component whose loss results in the 'donut' groplaque morphology. More specific physiological tests showed that in the absence of Rex the establishment of a newly injected p lambda CM plasmid becomes temperature-sensitive (ts), while plasmid maintenance remains unaffected. This indicates that the role of Rex in plasmid survival is confined to the early stages of transduction, where it might either assist plasmid replication or retard host replication, to help the plasmid replicon achieve a copy number sufficient for stable transmission.     

Identification in vivo of promoter activity in the left site of the att region of bacteriophage lambda DNA

The promoter-probing vector (pSK plasmid) was explored for cloning of the fragments from lambda cI857 and lambda b2 DNAs containing different regions of the att site. We have constructed all-tet fusions where the fusions are: 1) HindIII/BamHI-491 base pairs (b. p.) fragment of lambda cI857 DNA containing POP' site (plasmid pSK-PP'); 2) AluI-242 b. p. fragment of lambda cI857 DNA containing the left arm of the POP' site (plasmid pSK-P); 3) AluI-242 b. p. fragment of lambda cI857 DNA with opposite orientation (plasmid pSK-P); 4) EcoRI/BamHI-750 b. p. fragment of lambda b2 DNA containing the right arm of the POP' site (plasmid pSK-P'). These fusions permit us to analyse the effect of various pieces of the attachment site on the expression tet gene as the result of reparation of this gene promoter. We find that expression of tet (tetracycline resistant phenotype) takes place in the pSK-PP' and pSK-P but not in the pSK-P' and pSK-P. These facts permit us to conclude that the left arm of the att site contains a rightward promoter functioning in vivo. We postulate that this promoter activity might correspond to the promoter patt, which was described in previous experiments in vitro.