Laccase-catalyzed oxidation of phenolic compounds in organic media

Rhus vernificera laccase-catalyzed oxidation of phenolic compounds, i.e., (+)-catechin, (−)-epicatechin and catechol, was carried out in selected organic solvents to search for the favorable reaction medium. The investigation on reaction parameters showed that optimal laccase activity was obtained in hexane at 30 °C, pH 7.75 for the oxidation of (+)-catechin as well as for (−)-epicatechin, and in toluene at 35 °C, pH 7.25 for the oxidation of catechol. E_a and Q₁₀ values of the biocatalysis in the reaction media of the larger log p solvents like isooctane and hexane were relatively higher than those in the reaction media of lower log p solvents like toluene and dichloromethane. Maximum laccase activity in the organic media was found with 6.5% of buffer as co-solvent. A wider range of 0–28 μg protein/ml in hexane than that of 0–16.7 μg protein/ml in aqueous medium was observed for the linear increasing conversion of (+)-catechin. The kinetic studies revealed that in the presence of isooctane, hexane, toluene and dichloromethane, the K_m values were 0.77, 0.97, 0.53 and 2.9 mmol/L for the substrate of (+)-catechin; 0.43, 0.34, 0.14 and 3.4 mmol/L for (−)-epicatechin; 2.9, 1.8, 0.61 and 1.1 mmol/L for catechol, respectively, while the corresponding V_max values were 2.1 × 10⁻², 2.3 × 10⁻², 0.65 × 10⁻² and 0.71 × 10⁻² δA/μg protein min); 1.8 × 10⁻², 0.88 × 10⁻², 0.19 × 10⁻² and 1.0 × 10⁻² δA/μg protein min); 0.48 × 10⁻², 0.59 × 10⁻², 0.67 × 10⁻² and 0.54 × 10⁻² δA/μg protein min), respectively. FT-IR indicated the formation of probable dimer from (+)-catechin in organic solvent. These results suggest that this laccase has higher catalytic oxidation capacity of phenolic compounds in suitable organic media and favorite oligomers could be obtained.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Using porphyritic andesite as a new additive for improving hydrolysis and acidogenesis of solid organic wastes

The effects of porphyritic andesite on the hydrolysis and acidogenesis of solid organic wastes were investigated by batch and continuous experiments using a rotational drum fermentation system. The results of the batch experiment show that if porphyritic andesite (1%, 3%, and 5% reactants) is added initially, the pH level increases and hydrolysis and acidogenesis are accelerated. The highest surface based hydrolysis constant (26.4 × 10⁻³ kg m⁻² d⁻¹) and volatile solid degradation ratio (43.3%) were obtained at a 1% porphyritic andesite addition. In the continuous experiment, porphyritic andesite elevated the first order hydrolysis constant from 13.10 × 10⁻³ d⁻¹ to 18.82 × 10⁻³ d⁻¹. A particle mean diameter reduction rate of 33.05 μm/d and a volatile solid degradation rate of 3.53 g/L d⁻¹ were obtained under the hydraulic retention time of 4, 8, 12 and 16 d.     

Graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose and study of its swelling, metal ion sorption and flocculation behaviour

The present paper reports the graft copolymerization of N-vinylformamide onto sodium carboxymethylcellulose by free radical polymerization using potassium peroxymonosulphate/thiourea redox system in an inert atmosphere. The reaction conditions for maximum grafting have been optimized by varying the reaction variables, including the concentration of N-vinylformamide (12.0 × 10⁻²–28.0 × 10⁻² mol dm⁻³), potassium peroxymonosulphate (4.0 × 10⁻³–12.0 × 10⁻³ mol dm⁻³), thiourea (1.2 × 10⁻³–4.4 × 10⁻³ mol dm⁻³), sulphuric acid (2.0 × 10⁻³–10.0 × 10⁻³ mol dm⁻³), sodium carboxymethylcellulose (0.2–1.8 g dm⁻³) along with time duration (60–180 min) and temperature (25–45° C). Water swelling capacity, metal ion sorption and flocculation studies of synthesized graft copolymer have been performed with respect to the parent polymer. The graft copolymer has been characterized by FTIR spectroscopy and thermogravimetric analysis.     

Characteristics and seasonal variation in the semen of Markhoz bucks in western Iran

The aims of the present study were to evaluate if seasonality in semen characteristics and plasma testosterone concentrations exist in Markhoz male goats. Ten Markhoz (Angora) bucks were housed and fed according to standard recognized practices. During the observation period, semen was collected monthly with the aid of an electro-ejaculator and examined microscopically immediately after collection. Physical parameters of semen and the semen index were recorded. Blood samples were also taken monthly throughout the observation period and the plasma testosterone concentration monitored. Bucks demonstrated a higher semen quality (P < 0.05) in autumn and summer (semen index of 965 × 10⁶ and 752 × 10⁶ ml⁻¹, respectively), compared to spring and winter (semen index of 606 × 10⁶ and 512 × 10⁶, respectively). This coincided with a higher (P < 0.05) plasma testosterone concentration in autumn and summer (8.1 and 10.1 ng ml⁻¹, respectively), compared to that obtained in spring (3.0 ng ml⁻¹) and winter (2.5 ng ml⁻¹). During autumn and summer, the ejaculate volume (average of 1.2 and 1.0 ml), sperm output (1159 × 10⁶ and 1005 × 10⁶ sperm ml⁻¹), sperm mass motility (4.2 and 4.3), sperm progressive motility (83.9 and 82.0%) and percentage live sperm (90.7 and 88.2%, respectively) of the bucks were higher (P < 0.05) than in the spring (0.6 ml, 880 × 10⁶ sperm ml⁻¹, 3.3, 71.5% and 80.2%) and winter (0.7 ml, 863 × 10⁶ sperm ml⁻¹, 4.0, 71.5% and 84.9%, respectively). During autumn and summer, the percentage of sperm abnormalities (5.0 and 9.2%) was significantly lower than that in spring (12.9%) and winter (11.2%). The semen pH was slightly alkaline being significantly (P < 0.05) lower in the autumn (7.1) than in spring (7.3). Data showed season of the year to influence all semen parameters evaluated—indicating that optimal buck performance may be obtained in late summer and autumn. It can thus be said that Markhoz bucks have distinct seasonal spermatogenic activity, with poorer semen characteristics being recorded during winter and spring. This may be a critical obstacle when implementing an intensive breeding system of three kidding seasons in 2 years, with natural mating being implemented.     

Synthesis, characterization and applications of graft copolymer (Chitosan-g-N,N-dimethylacrylamide)

An unreported graft copolymer of N,N-dimethylacrylamide (DMA) with chitosan has been synthesized under nitrogen atmosphere using peroxymonosulphate/mandelic acid redox pair. The effect of reaction conditions on grafting parameters i.e. grafting ratio, efficiency, conversion, add on and homopolymer has been studied. Experimental results show that maximum grafting has been obtained at 1.0 g dm⁻³ concentration of chitosan, 30 × 10⁻² mol dm⁻³ concentration of N,N-dimethylacrylamide and 7.0 × 10⁻³ mol dm⁻³ concentration of hydrogen ion. It has also been observed that grafting ratio, add on, conversion and efficiency increase upto 3.2 × 10⁻³ mol dm⁻³ of mandelic acid, 12.0 × 10⁻³ mol dm⁻³ of potassium peroxymonosulphate, 150 min of time and 40 °C of temperature. Grafted polymer has been characterized by FTIR spectroscopy and thermogravimetric analysis. Water swelling capacity of chitosan-g-N,N-dimethylacrylamide has been determined. It has been observed that the graft copolymer is thermally more stable than parent backbone.     

Methyl xanthine phosphodiesterase inhibitors behave as prostaglandin antagonists in a perfused rat mesenteric artery preparation

The methyl xanthines, theophylline, caffeine and 3-isobutyl-1 methyl xanthine (MIX) inhibited the pressure responses to noradrenaline, angiotensin II and potassium ions in the isolated perfused mesenteric vascular bed of the male rat. The ID50s for inhibition of responses to noradrenaline were 1.85 μg/ml (0.83 × 10⁻⁵M) for MIX, 18 μg/ml (1 × 10⁻⁴M) for theophylline and 133 μg/ml (6.8 × 10⁻⁴M) for caffeine. Similar ID50 concentrations were found for responses to angiotensin II and potassium. We have previously found that substances which inhibit the three pressor agents equally may be prostaglandin (PG) synthesis inhibitors or PG antagonists. Xanthine itself, cyclic AMP and dibutyryl cyclic AMP had no inhibitory effects on the preparation up to concentrations of 10⁻²M. Partial inhibition of PG synthesis by indomethacin shifted the % inhibition/log concentration curve to the left, while addition of exogeneous PGE2 shifted it to the right. In preparations completely inhibited by sufficient indomethacin added to the perfusate to block PG synthesis, and then restored by adding 1 or 5 ng/ml PGE2 in addition to the indomethacin, the methyl xanthines again inhibited responses suggesting that they were PG antagonists rather than inhibitors of synthesis or release. In preliminary experiments MIX also inhibited effects of PGF2α on rat uterus and PGE1 on guinea pig ileum. Effective concentrations of theophylline were similar to the therapeutic levels in human plasma. PG antagonism may be a major action of methyl xanthines requiring reinterpretation of many experiments which have attributed their effects to PDE inhibition. PGs may also be involved in regulating PDE action.     

Effect of prostaglandin F2α on propulsive activity of the isolated segmental colon of the guinea-pig

The effects of prostaglandin F_2α (PGF_2α) on propulsive activity in segments of isolated colon and on isolated strips of guinea-pig colon were investigated.Using experimental conditions under which spontaneous propulsive activity was negligible, PGF_2α (5×10⁻⁸×1×10⁻⁶M), added to the bathing medium, increased propulsive activity in a concentration dependent manner. This increase of propulsive activity was abolished in the presence of atropine or tetrodotoxin (1×10⁻⁷g/ml).The contractions produced by PGF_2α(5×10⁻⁷ − 1×10⁻⁵M) in isolated longitudinal and circular smooth muscle strips of guinea-pig colon were unaffected in the presence of atropine or tetrodotoxin (1×10⁻⁷ g/ml).From these results it is concluded that under the conditions employed in this study propulsive activity stimulated by PGF_2α may depend on the contractions of both muscle layers and stimulation of the peristalic reflex.     

Xanthine oxidase/laponite nanoparticles immobilized on glassy carbon electrode: Direct electron transfer and multielectrocatalysis

In this work, colloidal laponite nanoparticles were further expanded into the design of the third-generation biosensor. Direct electrochemistry of the complex molybdoenzyme xanthine oxidase (XnOx) immobilized on glassy carbon electrode (GCE) by laponite nanoparticles was investigated for the first time. XnOx/laponite thin film modified electrode showed only one pair of well defined and reversible cyclic voltammetric peaks attributed to XnOx–FAD cofactor at about −0.370 V vs. SCE (pH 5). The formal potential of XnOx–FAD/FADH₂ couple varied linearly with the increase of pH in the range of 4.0–8.0 with a slope of −54.3 mV pH⁻¹, which indicated that two-proton transfer was accompanied with two-electron transfer in the electrochemical reaction. More interestingly, the immobilized XnOx retained its biological activity well and displayed an excellent electrocatalytic performance to both the oxidation of xanthine and the reduction of nitrate. The electrocatalytic response showed a linear dependence on the xanthine concentration ranging from 3.9 × 10⁻⁸ to 2.1 × 10⁻⁵ M with a detection limit of 1.0 × 10⁻⁸ M based on S/N = 3.     

A comparison between freezing methods for the cryopreservation of stallion spermatozoa

The effects of sperm freezing concentration (40 × 10⁶ mL⁻¹ vs. 400 × 10⁶ mL⁻¹), straw size (0.25 mL vs. 0.5 mL) and freezing method (liquid nitrogen vapour in a Styrofoam^® box vs. programmable freezing machine) were evaluated in a 2 × 2 × 2 factorial experimental design using 3 split ejaculates from each of 4 stallions. Immediately after thawing, the total motility and forward progressive motility of spermatozoa frozen at a concentration of 40 × 10⁶ mL⁻¹ was higher than for spermatozoa frozen at 400 × 10⁶ mL⁻¹. No significant differences were observed in the semen parameters assessed after cryopreservation in either 0.25 or 0.5 mL straws. However, the programmable freezer provided a more consistent and reliable freezing rate than liquid nitrogen vapour. We conclude that an effective protocol for the cryopreservation of stallion spermatozoa at low concentrations would include concentrations of 40 × 10⁶ mL⁻¹ in 0.25 mL straws using a programmable freezer. This freezing protocol would be suitable for emerging sperm technologies such as sex-preselection of stallion spermatozoa as the sorting process yields only low numbers of spermatozoa in a small volume available for either immediate insemination or cryopreservation.     

Hybridization biosensor using 2-nitroacridone as electrochemical indicator for detection of short DNA species of Chronic Myelogenous Leukemia

A new acridone derivative 2-nitroacridone (NAD) was synthesized in this paper, and it was found that NAD had excellent electrochemical activity on the glassy carbon electrode (GCE) with a couple reversible redox peaks at 0.051 V and 0.103 V, respectively. Voltammetry was used to investigate the electrochemical behavior of NAD and the interaction between NAD and salmon sperm DNA. In pH 4.0 phosphate buffer solution, the binding ratio between NAD and salmon sperm DNA was calculated to be 2:1 and the binding constant was 3.19 × 10⁵ L/mol. A Chronic Myelogenous Leukemia (CML, Type b₃a₂) DNA biosensor was developed by immobilizing covalently single-stranded CML DNA fragments to a modified GCE. The surface hybridization of the immobilized single-stranded CML DNA fragment with its complementary DNA fragment was evidenced by electrochemical methods using NAD as a novel electrochemical indicator, with a detection limit of 6.7 × 10⁻⁹ M and a linear response range of 1.8 × 10⁻⁸ M to 9.1 × 10⁻⁸ M for CML DNA. Selective determination of complementary ssDNA was achieved using differential pulse voltammetry (DPV).     

A sugar-aza-crown ether-based fluorescent sensor for Hg and Cu

A fluorescent sensor, 5, based upon the sugar-aza-crown ether structure with two anthracenetriazolymethyl groups was prepared and its fluoroionophoric properties toward transition metal ions were investigated. In methanol, the sensor exhibits highly selective recognition of Cu²⁺ and Hg²⁺ ions among a series of tested metal ions. The association constant for 5·Cu²⁺ and 5·Hg²⁺ in methanol was calculated to be 4.0 × 10⁵ M⁻¹ and 1.1 × 10⁵ M⁻¹, respectively. The detection limits for the sensing of Cu²⁺ and Hg²⁺ ions were 1.39 × 10⁻⁶ M and 1.39 × 10⁻⁵ M, respectively.     

Pine nut peroxidase immobilized on chitosan crosslinked with citrate and ionic liquid used in the construction of a biosensor

A biosensor based on the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI·Tf₂N) and a novel source of peroxidase (tissue from the pine nuts of Araucaria angustifolia) was constructed. This enzyme was immobilized on chitosan crosslinked with citrate and the biosensor used for the determination of rosmarinic acid by square-wave voltammetry. The peroxidase in the presence of hydrogen peroxide catalyzes the oxidation of rosmarinic acid to quinone and the electrochemical reduction of the product was obtained at a potential of +0.15 V vs. Ag/AgCl. Different analytical parameters influencing the biosensor response, that is, peroxidase units, pH, hydrogen peroxide concentration and parameters for the square-wave voltammetry (frequency, pulse amplitude and scan increment), were investigated. The best performance was observed for the biosensor under the following conditions: 1000 units mL⁻¹ peroxidase, pH 7.0 and 8.3 × 10⁻⁴ mol L⁻¹ hydrogen peroxide with a frequency of 30 Hz, pulse amplitude of 100 mV and scan increment of 5.0 mV. The biosensor gave a linear response to rosmarinic acid over the concentration range of 9.07 × 10⁻⁷ to 4.46 × 10⁻⁶ mol L⁻¹ with a detection limit of 7.25 × 10⁻⁸ mol L⁻¹. The recovery of rosmarinic acid in plant extracts ranged from 97.0% to 109.6% and the determination of this substance in these samples using the biosensor compared favorably with that using the capillary electrophoresis method.     

Polycrystalline bismuth oxide films for development of amperometric biosensor for phenolic compounds

An attractive biocomposite based on polycrystalline bismuth oxide (BiO_x) film and polyphenol oxidase (PPO) was proposed for the construction of a mediator-free amperometric biosensor for phenolic compounds in environmental water samples. The phenolic biosensor could be easily achieved by casting the biocomposite on the surface of glassy carbon electrode (GCE) via the cross-linking step by glutaraldehyde. The laboratory-prepared bismuth oxide semiconductor was polymorphism. Its hydrophilicity provided a favorable microenvironment for retaining the biological activity of the immobilized protein. The parameters of the fabrication process and the various experimental variables for the enzyme electrode were optimized. The proposed PPO/BiO_x biosensor provided a linear response to catechol over a concentration range of 4 × 10⁻⁹ M to 1.5 × 10⁻⁵ M with a dramatically developed sensitivity of 11.3 A M⁻¹ cm⁻² and a detection limit of 1 × 10⁻⁹ M based on S/N = 3. In addition, the PPO/BiO_x biocomposite was characterized by scanning electron microscope (SEM), Fourier transform infrared spectra (FTIR) and rotating disk electrode voltammetry.     

Zinc oxide/redox mediator composite films-based sensor for electrochemical detection of important biomolecules

Electrochemical oxidation of serotonin (SN) onto zinc oxide (ZnO)-coated glassy carbon electrode (GCE) results in the generation of redox mediators (RMs) that are strongly adsorbed on electrode surface. The electrochemical properties of zinc oxide-electrogenerated redox mediator (ZnO/RM) (inorganic/organic) hybrid film-coated electrode has been studied using cyclic voltammetry (CV). The scanning electron microscope (SEM), atomic force microscope (AFM), and electrochemical techniques proved the immobilization of ZnO/RM core/shell microparticles on the electrode surface. The GCE modified with ZnO/RM hybrid film showed two reversible redox peaks in acidic solution, and the redox peaks were found to be pH dependent with slopes of −62 and −60 mV/pH, which are very close to the Nernst behavior. The GCE/ZnO/RM-modified electrode exhibited excellent electrocatalytic activity toward the oxidations of ascorbic acid (AA), dopamine (DA), and uric acid (UA) in 0.1 M phosphate buffer solution (PBS, pH 7.0). Indeed, ZnO/RM-coated GCE separated the anodic oxidation waves of DA, AA, and UA with well-defined peak separations in their mixture solution. Consequently, the GCE/ZnO/RMs were used for simultaneous detection of DA, AA, and UA in their mixture solution. Using CV, calibration curves for DA, AA, and UA were obtained over the range of 6.0 × 10⁻⁶ to 9.6 × 10⁻⁴ M, 1.5 × 10⁻⁵ to 2.4 × 10⁻⁴ M, and 5.0 × 10⁻⁵ to 8 × 10⁻⁴ M with correlation coefficients of 0.992, 0.991, and 0.989, respectively. Moreover, ZnO/RM-modified GCE had good stability and antifouling properties.     

Clean conversion of cellulose into fermentable glucose

We studied the process of conversion of microcrystalline-cellulose into fermentable glucose in the formic acid reaction system using cross polarization/magic angle spinning ¹³C-nuclear magnetic resonance, X-ray diffraction and Fourier transform infrared spectroscopy. The results indicated that formic acid as an active agent was able to effectively penetrate into the interior space of the cellulose molecules, thus collapsing the rigid crystalline structure and allowing hydrolysis to occur easily in the amorphous zone as well as in the crystalline zone. The microcrystalline-cellulose was hydrolyzed using formic acid and 4% hydrochloric acid under mild conditions. The effects of hydrochloric acid concentration, the ratio of solid to liquid, temperature (55–75 °C) and retention time (0–9 h), and the concentration of glucose were analyzed. The hydrolysis velocities of microcrystalline-cellulose were 6.14 × 10^− 3 h^− 1 at 55 °C, 2.94 × 10^− 2 h^− 1 at 65 °C, and 6.84 × 10^− 2 h^− 1 at 75 °C. The degradation velocities of glucose were 0.01 h^− 1 at 55 °C, 0.14 h^− 1 at 65 °C, 0.34 h^− 1 at 75 °C. The activation energy of microcrystalline-cellulose hydrolysis was 105.61 kJ/mol, and the activation energy of glucose degradation was 131.37 kJ/mol.     

Development of an amperometric assay for phosphate ions in urine based on a chemically modified screen-printed carbon electrode

An amperometric assay for the determination of inorganic phosphate (Pi) in urine has been developed without the need for sample preparation. A screen-printed carbon electrode modified with the electrocatalyst cobalt phthalocyanine (CoPC–SPCE) and covered with a cellulose acetate membrane (CAM) serves as the sensor. The sensor detects hydrogen peroxide (H₂O₂), which is produced as a result of the oxidative decarboxylation of pyruvate, catalyzed by pyruvate oxidase (PyOd), in the presence of Pi, oxygen, and cofactors. Following optimization of solution conditions, and in the presence of a urine sample, a linear range was found to exist between the rate of current increase and phosphate concentration over the range of 2.27 × 10⁻⁵ to 1.81 × 10⁻⁴ M, and the limit of detection was found to be 4.27 × 10⁻⁶ M. The assay was applied to the determination of phosphate ions in the urine of a normal subject, and the mean concentration in unspiked urine was found to be 3.40 × 10⁻⁵ M with a coefficient of variation of 8.0% (n = 5). The mean recovery of phosphate added to urine samples was 98.7% with a coefficient of variation of 5.5% (n = 3). To the authors’ knowledge, this is the first report of an amperometric assay for Pi that incorporates a CoPC–SPCE as the sensing device.     

Characteristics of the chemostat culture of murine leukemia L 1210 cells

Mouse leukemia L 1210 cells were cultivated under glucose limitation in a chemostat. More than 20 steady-states were established over 9 different dilution rates ranging from 0.20 day⁻¹ (cell doubling time 83 h) to 2.0 days⁻¹ (cell doubling time 8.3 h). The steady-states were characterized by: a constant cell number, constant cell volume, constant concentrations of DNA, RNA, and L-lactate (in the culture supernatant), a constant percentage of cells labelled by autoradiography, and constant rate of incorporation of [³H]TdR, [³H]uridine, and ¹⁴C-labelled amino acids into cellular acid-precipitable material. Individual steady-states were maintained for periods up to 600 h continuous operation of the chemostat. A maximum output of 66.4 × 10⁶ cells/h was obtained at a dilution rate of 1.3 day⁻¹. The glucose substrate constant was determined as 0.0063 mg/ml. The relationships between dilution rate and the steady-state cell concentration, glucose concentration, and output of L 1210 cells from the chemostat, were in general agreement with the theoretical curves. It was found that the principles of continuous culture derived from the study of microorganisms are to a large extent applicable to the cultivation of animal cells.     

Measurement of chloramphenicol by capillary zone electrophoresis following end-column amperometric detection at a carbon fiber micro-disk array electrode

Capillary zone electrophoresis was employed for the measurement of chloramphenicol using end-column amperometric detection with a carbon fiber micro-disk array electrode, at a constant potential of −1.00 V vs. saturated calomel electrode. The effect of oxygen in the buffer has been investigated. It is found that when the area of the carbon fiber electrode is smaller than 1.1 mm², the interference of oxygen can be overcome. In this procedure deoxygenation is not necessary. The effect of pH, the concentration of the buffer and the high separation voltage across the capillary on the migration time, electrophoretic peak current and separation efficiency has been studied. The optimum conditions of separation and detection are 8.4×10⁻⁴ mol/l HOAc–3.2×10⁻³ mol/l NaOAc for the buffer solution, 20 kV for the separation voltage, 5 kV and 5 s for the injection voltage and the injection time, respectively. The calibration plot was found to be linear in the range 5×10⁻⁶ to 1×10⁻³ mol/l and the limit of detection is 9.1×10⁻⁷ mol/l or 1.4 fmol (S/N=2). The relative standard deviation is 1.1% for the migration time and 2.3% for the electrophoretic peak current. The method was applied to the determination of chloramphenicol in human serum.     

Film forming capacity of chemically modified corn starches

Native starch can be chemically modified to improve its functionality and to expand its uses. Modified starches were characterized and the rheological behavior of filmogenic suspensions was analyzed. The film forming capacity of different chemical modified corn starches was evaluated. Acetylated starch was selected by the characteristics of the resulted films; its optimum concentration was 5% w/w since their films exhibited the lowest water vapor permeability (WVP, 1.26 × 10⁻¹⁰ g/m s Pa). The effect of glycerol as plasticizer on film properties depend on its concentration, being 1.5% w/w those that allows to obtain the lowest WVP value (1.64 × 10⁻¹¹ g/m s Pa), low film solubility in water and a more compact structure than those of unplasticized films. Mechanical behavior of plasticized acetylated starch films depends on glycerol concentration, being rigid and brittle the unplasticized ones, ductile those containing 1.5% w/w of glycerol and very flexible those with a higher plasticizer content.