Hexavalent chromium reduction by bacterial consortia and pure strains from an alkaline industrial effluent

Aims: To characterize the bacterial consortia and isolates selected for their role in hexavalent chromium removal by adsorption and reduction. Methods and Results: Bacterial consortia from industrial wastes revealed significant Cr(VI) removal after 15 days when incubated in medium M9 at pH 6·5 and 8·0. The results suggested chromium reduction. The bacterial consortia diversity (T‐RFLP based on 16S rRNA gene) indicated a highest number of operational taxonomic units in an alkaline carbonate medium mimicking in situ conditions. However, incubations under such conditions revealed low Cr(VI) removal. Genomic libraries were obtained for the consortia exhibiting optimal Cr(VI) removal (M9 medium at pH 6·5 and 8·0). They revealed the dominance of 16S rRNA gene sequences related to the genera Pseudomonas/Stenotrophomonas or Enterobacter/Halomonas, respectively. Isolates related to Pseudomonas fluorescens and Enterobacter aerogenes were efficient in Cr(VI) reduction and adsorption to the biomass. Conclusions: Cr(VI) reduction was better at neutral pH rather than under in situ conditions (alkaline pH with carbonate). Isolated strains exhibited significant capacity for Cr(VI) reduction and adsorption. Significance and Impact of Study: Bacterial communities from chromium‐contaminated industrial wastes as well as isolates were able to remove Cr(VI). The results suggest a good potential for bioremediation of industrial wastes when optimal conditions are applied.     

Alleviation of toxic hexavalent chromium using indigenous aerobic bacteria isolated from contaminated tannery industry sites

In the last decade, much attention has been paid to bioremediation of Cr(VI) using various bacterial species. Cr(VI) remediation by indegeneous bacteria isolated from contaminated sites of a tannery industry located in Tamil Nadu, India, was investigated in this study. Three Cr(VI) resistant bacterial strains (TES-1, TEf-1, and TES-2) were isolated and selected based on their Cr(VI) reduction ability in minimal salt medium. Among these three bacterial strains, TES-1 was found to be most efficient in bioreduction, while TES-2 was only found to be Cr(VI) resistant and showed negligible bioreduction, whereas TEf-1 was observed to be most Cr(VI) tolerant. Potential for bioremediation of TES-1 and TEf-1 was further investigated at different concentrations of Cr(VI) in the range of 50 to 350 mg L^?1. TEf-1 showed prominent synchronous growth throughout the experiment, whereas TES-1 took a longer acclimatization time. Minimum inhibitory concentrations (MIC) of Cr(VI) for TES-1 and TEf-1 were approximated as 600 mg L^?1 and 750 mg L^?1, respectively. The kinetic behavior of Cr(VI) reduction by TES-1 and TEf-1 exhibited zero- and first-order removal kinetics for Cr(VI), respectively. The most efficient strain TES-1 was identified as Streptomyces sp. by gene sequencing of 16S rRNA.     

Biosorptive removal of cadmium from contaminated groundwater and industrial effluents

The cadmium removing capacity of a biosorbent Calotropis procera, a perennial wild plant, is reported here. The biomass was found to possess high uptake capacity of Cd(II). Adsorption was pH dependent and the maximum removal was obtained at two different pH i.e. pH 5.0 and 8.0. Maximum biosorption capacity in batch and column mode was found to be 40 and 50.5 mg/g. The adsorption equilibrium (> or =90% removal) was attained within 5 min irrespective of the cadmium ion concentration. Interfering ions viz. Zn(II), As(III), Fe(II), Ni(II) interfered only when their concentration was higher than the equimolar ratio. The Freundlich isotherm best explained the adsorption, yet the monolayer adsorption was also noted at lower concentrations of Cd(II). The FTIR analysis indicates the involvement of hydroxyl (-OH), alkanes (-CH), nitrite (-NO(2)), and carboxyl group (-COO) chelates in metal binding. The complete desorption of the cadmium was achieved by 0.1M H(2)SO(4) and 0.1M HCl. The C. procera based Cd(II) removal technology appears feasible.     

Metal tolerance and biosorption potential of filamentous fungi isolated from metal contaminated agricultural soil

Heavy metal analysis of agricultural field soil receiving long-term (>20 years) application of municipal and industrial wastewater showed two- to five-fold accumulation of certain heavy metals as compared to untreated soil. Metal-resistant fungi isolated from wastewater-treated soil belonged to genera Aspergillus, Penicillium, Alternaria, Geotrichum, Fusarium, Rhizopus, Monilia and Trichoderma. Minimum inhibitory concentrations (MIC) for Cd, Ni, Cr, Cu, and Co were determined. The MIC ranged from 0.2 to 5 mg ml(-1) for Cd, followed by Ni (0.1-4 mg ml(-1)), Cr (0.3-7 mg ml(-1)), Cu (0.6-9 mg ml(-1)) and for Co (0.1-5 mg ml(-1)) depending on the isolate. Aspergillus and Rhizopus isolates were tested for their metal biosorption potential for Cr and Cd in vitro. Biosorption experiments were conducted with initial metal concentrations of 2, 4, 6 and 8 mM with a contact time of 4 h and wet fungal biomass (1-5 g) at 25 degrees C. Maximum biosorption of Cr and Cd ions was found at 6 mM initial metal concentration. Aspergillus sp.1 accumulated 1.20 mg of Cr and 2.72 mg of Cd per gram of biomass. Accumulation of these two metals by very tolerant Aspergillus sp.2 isolate was at par with relatively less tolerant Aspergillus sp.1 isolate. Rhizopus sp. accumulated 4.33 mg of Cr and 2.72 mg of Cd per g of biomass. The findings indicated promising biosorption of cadmium and chromium by the Rhizopus and Aspergillus spp. from aqueous solution. There is little, if any, correlation between metal tolerance and biosorption properties of the test fungi.     

Recent advances in the molecular genetics of industrial filamentous fungi

Recently, considerable research effort has focused on the molecular genetics of filamentous fungi of industrial importance. Intense research was initiated following reports of transformation systems for the non-commercial filamentous fungi Neurospora crassa and Aspergillus nidulans, and was prompted by two principle considerations: (1) the possibility of exploiting the inherent ability of many filamentous fungi to secrete copious quantities of protein in submerged culture, and (2) the disappointing yields of many heterologous proteins when secreted from prokaryotic and yeast expression systems.     

Use of low-cost biological wastes and vermiculite for removal of chromium from tannery effluent

Biological wastes (sawdust, rice husk, coirpith and charcoal) and a naturally occurring mineral (vermiculite) have been tested for their effectiveness in removing Cr from tannery effluent through batch and column experiments. The adsorption capacities of the substrates were also evaluated using isotherm tests and computing distribution co-efficient. The sawdust exhibited a higher adsorption capacity (k = 1482 mgkg(-1)), followed by coirpith (k = 159 mgkg(-1)). The biosorbent and mineral vermiculite in columns were found very effective in removing Cr from tannery effluent. About 94% removal of Cr was achieved by a column of coirpith, and equally (93%) by a column containing a mixture of coirpith and vermiculite. This study showed that biological wastes are potential adsorbents of Cr, which could be successfully used to reduce the Cr concentrations in tannery effluent.     

Adaptation to cycloheximide: in vitro studies with filamentous fungi.

Adaptation of numerous strains of filamentous fungi to cycloheximide was noted upon first transfer during serial exposure to the antibiotic. The extent of this adaptation varied in part with the species and strain of the microorganism. Exposure on subsequent transfers caused no change in the growth of any of the strains used. These results suggest that nonzoopathogens may be differentiated from zoopathogens on the basis of adaptation to cycloheximide and that such adaptation might also be found in other eucaryotes.     

Biodegradation of aliphatic hydrocarbon by indigenous fungi isolated from used motor oil contaminated sites

Eighteen indigenous fungal isolates has been successfully isolated from samples of used motor oil, top five centimetres of soil and drainage water contaminated with used motor oil. All of the pure fungal isolates obtained were identified, characterized and subjected to preliminary screening by evaluating the average growth rate of each fungal isolates on minimal media containing 1% (v/v) used motor oil. Trichoderma asperellum strain TUB F-1067 (SA4), Trichoderma asperellum strain Tr48 (SA5), Trichoderma asperellum strain TUB F-756 (SA6), Penicillium species (P1), and Aspergillus species (P9) were further selected for their hydrocarbon biodegradation potential. Among these five fungal isolates selected, P1 strain presented a significant degree of degradation by degrading almost all of the n-alkanes (n-C-₁₅ to n-C-₂₃ range) present in the used motor oil, thus of greater potential in degrading the aliphatic hydrocarbon compounds of used motor oil. The authors would like to certify that the work have not been sent/considered to be published in other journals.     

Biological removal of carcinogenic chromium(VI) using mixed Pseudomonas strains

The contamination of soil and wastewaters with Cr(VI) is a major problem. It has been suggested that microbial methods for Cr(VI) reduction are better than chemical methods, as they do not add other ions or toxic chemicals to the environment. In this study an aerobic reduction of Cr(VI) to Cr(III) by employing mixed Pseudomonas cultures isolated from a marshy land has been reported. The role of chromium concentration, temperature, pH and additives on the microbial reduction of Cr(VI) has been investigated. NADH was found to enhance the rate of reduction of Cr(VI). Complete reduction of chromium(VI) has been possible even at chromium(VI) concentrations of 300 ppm. Ions like SO(4)(2-) and poly-phenols inhibited the metabolic activity relating to Cr(VI) reduction. Under optimal conditions 100 mg/L of Cr(VI) was completely reduced within 180 min.     

Nitrification in vitro by a range of filamentous fungi and yeasts

A wide range of fungi including yeasts, growing on Czapek Dox medium, nitrified added ammonium and the ammonium released by urea hydrolysis. Phanerochaete chrysosporium and Hymenoscyphus ericiae were the only fungi tested which failed to nitrify. A soil yeast (isolate 1) was the most active nitrifier of ammonium in vitro , forming 0·80 μg nitrate mg^-1 biomass over the 7 d incubation period.     

Cadmium removal capacities of filamentous soil fungi isolated from industrially polluted sediments,in La Plata (Argentina)

Aspergillus terreus, Cladosporium cladosporioides, Fusarium oxysporum, Gliocladium roseum, Penicillium spp., Talaromyces helicus and Trichoderma koningii were isolated from heavily polluted streams near an industrial area in La Plata, Argentina. The fungi were obtained from sediments with 0.25–0.50 mg Cd/l and they were isolated in cadmium-basal medium. They were then cultivated to evaluate their Cd detoxification abilities. The biomass developed in static assays represented 5–53% of the yield of stirred cultures, for the different fungal species, although the cadmium absorption were similar in both cases. These soil fungi represented 50% of the total isolates and their mycelial growth was conspicuous in these polluted sediments. Although bacteria have been mentioned as active microorganisms against heavy metals, the mycelial fungi were able to develop a significantly higher mass to sequestrate more metals. Thus, they could be used in remediation biotechnology to improve the Cd detoxification of chronically contaminated habitats.     

Modulation of chromium(VI) toxicity by organic and inorganic sulfur species in yeasts from industrial wastes

Two chromium(VI) resistant yeast strains (Candida sp. and Rhodosporidium sp.) were isolated from industrial wastes. Four different yeasts, three from the Industrial Yeast Collection and one of pharmaceutical origin, were also studied in relation to chromate toxicity and its alleviation by sulfur species. The growth of yeasts from industrial wastes was inhibited by 50% by high concentrations of Cr(VI): Candida sp. by 4 mM Cr(VI) and Rhodosporidium sp. by 10 mM Cr(VI) in Sabouraud Broth medium. The other Cr(VI)-sensitive yeasts were inhibited by 0.1 mM Cr(VI). The general mechanism of chromium resistance in Candida sp. and Rhodosporidium sp. was due to reduced uptake of chromium, but not to biological reduction from Cr(VI) to Cr(III). In Cr(VI)-sensitive yeasts, chromium was accumulated as much as 10-fold, as in Saccharomyces cerevisiae. Cr(VI) toxicity in Candida sp. was modulated from Cr(VI)-resistance to Cr(VI)-hypersensitivity depending on the addition of methionine, cysteine, sulfate and djenkolic acid. If Candida sp. was grown in the presence of S-amino acids, especially methionine, it was more resistant than if the sulfur source was sulfate. When sulfate transport was enhanced by addition of djenkolic acid, Candida sp. became hypersensitive. Rhosporidium sp. was always resistant to Cr(VI) because sulfate transport was inefficient and it assimilated sulfur as S-amino acids. Cr(VI)-sensitive yeasts required larger amounts of S-amino acids, especially methionine, to tolerate Cr(VI) toxicity. Cysteine was toxic for C.famata 6016 above 50 microM.     

Removal of chromium from industrial waste by using eucalyptus bark

Several low cost biomaterials such as baggase, charred rice husk, activated charcoal and eucalyptus bark (EB) were tested for removal of chromium. All the experiments were carried out in batch process with laboratory prepared samples and wastewater obtained from metal finishing section of auto ancillary unit. The adsorbent, which had highest chromium(VI) removal was EB. Influences of chromium concentration, pH, contact time on removal of chromium from effluent was investigated. The adsorption data were fitted well by Freundlich isotherm. The kinetic data were analyzed by using a first order Lagergren kinetic. The Gibbs free energy was obtained for each system and was found to be -1.879 kJ mol(-1) for Cr(VI) and -3.885 kJ mol(-1) for Cr(III) for removal from industrial effluent. The negative value of deltaG0 indicates the feasibility and spontaneous nature of adsorption. The maximum removal of Cr(VI) was observed at pH 2. Adsorption capacity was found to be 45 mg/g of adsorbent, at Cr(VI) concentration in the effluent being 250 mg/l. A waste water sample containing Cr(VI), Cr(III), Mg, and Ca obtained from industrial unit showed satisfactory removal of chromium. The results indicate that eucalyptus bark can be used for the removal of chromium.     

Low-cost supports used to immobilize fungi and reliable technique for removal hexavalent chromium in wastewater

The main goal of this study was to exploit low-cost and efficient sorbents for the removal and recovery of Cr(VI) in wastewater. Three supports of sawdust, polyurethane and alginate were applied to immobilize living and dead R. cohnii cells, respectively. There was a distinct increase in the Cr(VI) removal efficiency before and after the HCl-pretreatment. Langmuir adsorption isotherm model was well used to describe the distribution of Cr(VI) between the liquid and solid phases in batch studies. The values of q0 predicted by Thomas model were near to experimental ones in the experiments of packed column. The breakthrough curves calculated with this model were consistent well with experimental ones at a largely extent. Desorption, regeneration and reuse of the packed column were studied. After 5 cycles, adsorption capacity was still kept at higher level, reaching to 91.4, 87.9, 91.4 and 93.3mg/l contrasted with the first cycle (94.1, 90.4, 94.8 and 98.5mg/l) and the desorption efficiency were 85.0%, 96.2%, 93.4% and 91.4% compared with the first cycle (87.6%, 95.4%, 96.7% and 94.3%), corresponding to living cells immobilized with sawdust, polyurethane, and dead cells immobilized with polyurethane and alginate, respectively. The results indicated that the packed columns with the immobilized living and dead R. cohnii cells were the better option to adsorb, desorb and recover Cr(VI) from wastewater.     

Feasibility of biohydrogen production from industrial wastes using defined microbial co-culture

Background

The development of clean or novel alternative energy has become a global trend that will shape the future of energy. In the present study, 3 microbial strains with different oxygen requirements, including Clostridium acetobutylicum ATCC 824, Enterobacter cloacae ATCC 13047 and Kluyveromyces marxianus 15D, were used to construct a hydrogen production system that was composed of a mixed aerobic-facultative anaerobic-anaerobic consortium. The effects of metal ions, organic acids and carbohydrate substrates on this system were analyzed and compared using electrochemical and kinetic assays. It was then tested using small-scale experiments to evaluate its ability to convert starch in 5 L of organic wastewater into hydrogen. For the one-step biohydrogen production experiment, H1 medium (nutrient broth and potato dextrose broth) was mixed directly with GAM broth to generate H2 medium (H1 medium and GAM broth). Finally, Clostridium acetobutylicum ATCC 824, Enterobacter cloacae ATCC 13047 and Kluyveromyces marxianus 15D of three species microbial co-culture to produce hydrogen under anaerobic conditions. For the two-step biohydrogen production experiment, the H1 medium, after cultured the microbial strains Enterobacter cloacae ATCC 13047 and Kluyveromyces marxianus 15D, was centrifuged to remove the microbial cells and then mixed with GAM broth (H2 medium). Afterward, the bacterial strain Clostridium acetobutylicum ATCC 824 was inoculated into the H2 medium to produce hydrogen by anaerobic fermentation.

Results

The experimental results demonstrated that the optimum conditions for the small-scale fermentative hydrogen production system were at pH 7.0, 35°C, a mixed medium, including H1 medium and H2 medium with 0.50 mol/L ferrous chloride, 0.50 mol/L magnesium sulfate, 0.50 mol/L potassium chloride, 1% w/v citric acid, 5% w/v fructose and 5% w/v glucose. The overall hydrogen production efficiency in the shake flask fermentation group was 33.7 mL/h^-1.L^-1, and those the two-step and the one-step processes of the small-scale fermentative hydrogen production system were 41.2 mL/h^-1.L^-1 and 35.1 mL/h^-1.L^-1, respectively.

Conclusion

Therefore, the results indicate that the hydrogen production efficiency of the two-step process is higher than that of the one-step process.     

一种适用于PCR反应的酵母菌、无绿藻及丝状真菌DNA提取方法

目的 介绍一种从酵母、无绿藻及丝状真菌中提取DNA以用于PCR反应的方法。方法 所用菌种包括临床分离的未知菌株和保藏菌株共23株：未知酵母菌（5株）、真皮毛孢子菌（1株）、糠秕马拉色菌（1株）、季也蒙念珠菌（5株）、未知丝状真菌（6株）、无绿藻（1株）、烟曲霉（2株）、拟青霉菌（1株）、茎点霉（1株）。用溶细胞酶（lyticase）结合Biospin真菌基因组DNA提取试剂盒提取基因组DNA,A260／A280检测纯度并计算质量浓度,用真菌通用引物ITS1／ITS4扩增真菌核糖体基因（rDNA）内转录间区ITS基因,经PCR扩增检验所提取的DNA质量。结果 成功提取所有23株真菌基因组DNA,其纯度及质量浓度能满足PCR反应的要求。结论 用溶细胞酶结合Biospin真菌基因组DNA提取试剂盒从酵母菌、无绿藻及丝状真菌提取的DNA可用于PCR反应。     

Role of autochthonous filamentous fungi in bioremediation of a soil historically contaminated with aromatic hydrocarbons

Nine fungal strains isolated from an aged and heavily contaminated soil were identified and screened to assess their degradative potential. Among them, Allescheriella sp. strain DABAC 1, Stachybotrys sp. strain DABAC 3, and Phlebia sp. strain DABAC 9 were selected for remediation trials on the basis of Poly R-478 decolorization associated with lignin-modifying enzyme (LME) production. These autochthonous fungi were tested for the abilities to grow under nonsterile conditions and to degrade various aromatic hydrocarbons in the same contaminated soil. After 30 days, fungal colonization was clearly visible and was confirmed by ergosterol determination. In spite of subalkaline pH conditions and the presence of heavy metals, the autochthonous fungi produced laccase and Mn and lignin peroxidases. No LME activities were detected in control microcosms. All of the isolates led to a marked removal of naphthalene, dichloroaniline isomers, o-hydroxybiphenyl, and 1,1'-binaphthalene. Stachybotrys sp. strain DABAC 3 was the most effective isolate due to its ability to partially deplete the predominant contaminants 9,10-anthracenedione and 7H-benz[DE]anthracen-7-one. A release of chloride ions was observed in soil treated with either Allescheriella sp. strain DABAC 1 or Stachybotrys sp. strain DABAC 3, suggesting the occurrence of oxidative dehalogenation. The autochthonous fungi led to a significant decrease in soil toxicity, as assessed by both the Lepidium sativum L. germination test and the Collembola mortality test.     

Microbiological treatment of industrial wastes containing toxic chromium involving successive use of bacteria,yeast and algae

Bacteria, yeasts, protozoa and algae, observed in industrial effluents from tanneries, were checked for their possible use in the detoxification of polluted water. Two bacterial strains were found to be highly resistant to Cr^VI. Several bacteria, yeasts and algae were observed to be capable of reducing Cr^VI to Cr^III.     

Isolation and characterization of coated vesicles from filamentous fungi

Coated vesicles have been shown to exist in Neurospora crassa (Ascomycetes) and Uromyces phaseoli (Basidiomycetes) growing germlings. Separation of coated vesicles in both fungi was obtained when the high-speed (100,000g) pellet was fractioned on a Sephacryl S-1000 gel filtration column, according to the procedure of Mueller and Branton. Electron micrographs of negatively stained coated vesicles from fractions of gel filtration show the same striking lattice coated vesicles similar to vertebrate coated vesicles. We observe two major size classes of coated vesicles in both fungi: the larger class (100-180 nm) is similar in size to vertebrate coated vesicles; the smaller class (50-80 nm) is mostly found in both fungi. When examined by SDS-PAGE, the Sephacryl column fractions containing the maximum concentration of electron microscopically visible coated vesicles coincide with the bands of the protein coat reported as clathrin. The protein composition on SDS-PAGE of the coated vesicles indicates a major polypeptide species of 180 kDa and minor 30 to 36 kDa species. Polypeptides of 100 kDa and 64 kDa are also found in the fractions containing coated vesicles.     

Isoenzyme characterization of proteases and amylases and partial purification of proteases from filamentous fungi causing biodeterioration of industrial paper

Biodeterioration is an undesirable process that can affect cultural heritage and economically important materials. Although several biotic and abiotic conditions can accelerate this process, microorganisms are perhaps its main promoters. Fungi are the most important microbial agents of biodeterioration of industrial paper stored in archives. The high genetic plasticity of these organisms allows them to adapt to different environments, using almost any class of materials as substrate. Fungi produce a wide array of enzymes, including cellulases, amylases, and proteases, which are responsible for their gross biodeterioration activity. Thirty-two morphotypes of filamentous fungi were isolated on different media from industrial paper at an advanced stage of biodeterioration. The isolates showed different degrees of cellulolytic, proteolytic, and amylolytic activities on plate assays. The highest proteolytic and amylolytic activities were selected for isoform characterization, which provided an indication of the biochemical diversity that allowed them to colonize these materials. Eladia sacculum was the morphotype selected for partial purification of basic proteases since it has three basic isoforms, simplifying the purification process. We obtained a protein of 35 kDa with a pI of 8.9.