Inhibition of AmpC beta-lactamase through a destabilizing interaction in the active site.

Beta-lactamases hydrolyze beta-lactam antibiotics, including penicillins and cephalosporins; these enzymes are the most widespread resistance mechanism to these drugs and pose a growing threat to public health. beta-Lactams that contain a bulky 6(7)alpha substituent, such as imipenem and moxalactam, actually inhibit serine beta-lactamases and are widely used for this reason. Although mutant serine beta-lactamases have arisen that hydrolyze beta-lactamase resistant beta-lactams (e.g., ceftazidime) or avoid mechanism-based inhibitors (e.g., clavulanate), mutant serine beta-lactamases have not yet arisen in the clinic with imipenemase or moxalactamase activity. Structural and thermodynamic studies suggest that the 6(7)alpha substituents of these inhibitors form destabilizing contacts within the covalent adduct with the conserved Asn152 in class C beta-lactamases (Asn132 in class A beta-lactamases). This unfavorable interaction may be crucial to inhibition. To test this destabilization hypothesis, we replaced Asn152 with Ala in the class C beta-lactamase AmpC from Escherichia coli and examined the mutant enzyme's thermodynamic stability in complex with imipenem and moxalactam. Consistent with the hypothesis, the Asn152 --> Ala substitution relieved 0.44 and 1.10 kcal/mol of strain introduced by imipenem and moxalactam, respectively, relative to the wild-type complexes. However, the kinetic efficiency of AmpC N152A was reduced by 6300-fold relative to that of the wild-type enzyme. To further investigate the inhibitor's interaction with the mutant enzyme, the X-ray crystal structure of moxalactam in complex with N152A was determined to a resolution of 1.83 A. Moxalactam in the mutant complex is significantly displaced from its orientation in the wild-type complex; however, moxalactam does not adopt an orientation that would restore competence for hydrolysis. Although Asn152 forces beta-lactams with 6(7)alpha substituents out of a catalytically competent configuration, making them inhibitors, the residue is essential for orienting beta-lactam substrates and cannot simply be replaced with a much smaller residue to restore catalytic activity. Designing beta-lactam inhibitors that interact unfavorably with this conserved residue when in the covalent adduct merits further investigation.     

Crystal structures of the Bacillus licheniformis BS3 class A beta-lactamase and of the acyl-enzyme adduct formed with cefoxitin

The Bacillus licheniformis BS3 beta-lactamase catalyzes the hydrolysis of the beta-lactam ring of penicillins, cephalosporins, and related compounds. The production of beta-lactamases is the most common and thoroughly studied cause of antibiotic resistance. Although they escape the hydrolytic activity of the prototypical Staphylococcus aureus beta-lactamase, many cephems are good substrates for a large number of beta-lactamases. However, the introduction of a 7alpha-methoxy substituent, as in cefoxitin, extends their antibacterial spectrum to many cephalosporin-resistant Gram-negative bacteria. The 7alpha-methoxy group selectively reduces the hydrolytic action of many beta-lactamases without having a significant effect on the affinity for the target enzymes, the membrane penicillin-binding proteins. We report here the crystallographic structures of the BS3 enzyme and its acyl-enzyme adduct with cefoxitin at 1.7 A resolution. The comparison of the two structures reveals a covalent acyl-enzyme adduct with perturbed active site geometry, involving a different conformation of the omega-loop that bears the essential catalytic Glu166 residue. This deformation is induced by the cefoxitin side chain whose position is constrained by the presence of the alpha-methoxy group. The hydrolytic water molecule is also removed from the active site by the 7beta-carbonyl of the acyl intermediate. In light of the interactions and steric hindrances in the active site of the structure of the BS3-cefoxitin acyl-enzyme adduct, the crucial role of the conserved Asn132 residue is confirmed and a better understanding of the kinetic results emerges.     

Acyl-intermediate structures of the extended-spectrum class A beta-lactamase,Toho-1, in complex with cefotaxime,cephalothin, and benzylpenicillin

Bacterial resistance to beta-lactam antibiotics is a serious problem limiting current clinical therapy. The most common form of resistance is the production of beta-lactamases that inactivate beta-lactam antibiotics. Toho-1 is an extended-spectrum beta-lactamase that has acquired efficient activity not only to penicillins but also to cephalosporins including the expanded-spectrum cephalosporins that were developed to be stable in former beta-lactamases. We present the acyl-intermediate structures of Toho-1 in complex with cefotaxime (expanded-spectrum cephalosporin), cephalothin (non-expanded-spectrum cephalosporin), and benzylpenicillin at 1.8-, 2.0-, and 2.1-A resolutions, respectively. These structures reveal distinct features that can explain the ability of Toho-1 to hydrolyze expanded-spectrum cephalosporins. First, the Omega-loop of Toho-1 is displaced to avoid the steric contacts with the bulky side chain of cefotaxime. Second, the conserved residues Asn(104) and Asp(240) form unique interactions with the bulky side chain of cefotaxime to fix it tightly. Finally, the unique interaction between the conserved Ser(237) and cephalosporins probably helps to bring the beta-lactam carbonyl group to the suitable position in the oxyanion hole, thus increasing the cephalosporinase activity.     

Structures of ceftazidime and its transition-state analogue in complex with AmpC beta-lactamase: implications for resistance mutations and inhibitor design

Third-generation cephalosporins are widely used beta-lactam antibiotics that resist hydrolysis by beta-lactamases. Recently, mutant beta-lactamases that rapidly inactivate these drugs have emerged. To investigate why third-generation cephalosporins are relatively stable to wild-type class C beta-lactamases and how mutant enzymes might overcome this, the structures of the class C beta-lactamase AmpC in complex with the third-generation cephalosporin ceftazidime and with a transition-state analogue of ceftazidime were determined by X-ray crystallography to 2.0 and 2.3 A resolution, respectively. Comparison of the acyl-enzyme structures of ceftazidime and loracarbef, a beta-lactam substrate, reveals that the conformation of ceftazidime in the active site differs from that of substrates. Comparison of the structures of the acyl-enzyme intermediate and the transition-state analogue suggests that ceftazidime blocks formation of the tetrahedral transition state, explaining why it is an inhibitor of AmpC. Ceftazidime cannot adopt a conformation competent for catalysis due to steric clashes that would occur with conserved residues Val211 and Tyr221. The X-ray crystal structure of the mutant beta-lactamase GC1, which has improved activity against third-generation cephalosporins, suggests that a tandem tripeptide insertion in the Omega loop, which contains Val211, has caused a shift of this residue and also of Tyr221 that would allow ceftazidime and other third-generation cephalosporins to adopt a more catalytically competent conformation. These structural differences may explain the extended spectrum activity of GC1 against this class of cephalosporins. In addition, the complexed structure of the transition-state analogue inhibitor (K(i) 20 nM) with AmpC reveals potential opportunities for further inhibitor design.     

Design of potent beta-lactamase inhibitors by phage display of beta-lactamase inhibitory protein

Beta-lactamase inhibitory protein (BLIP) binds tightly to several beta-lactamases including TEM-1 beta-lactamase (K(i) 0.1 nm). The TEM-1 beta-lactamase/BLIP co-crystal structure indicates that two turn regions in BLIP insert into the active site of beta-lactamase to block the binding of beta-lactam antibiotics. Residues from each turn, Asp(49) and Phe(142), mimic interactions made by penicillin G when bound in the beta-lactamase active site. Phage display was used to determine which residues within the turn regions of BLIP are critical for binding TEM-1 beta-lactamase. The sequences of a set of functional mutants from each library indicated that a few sequence types were predominant. These BLIP mutants exhibited K(i) values for beta-lactamase inhibition ranging from 0.01 to 0.2 nm. The results indicate that even though BLIP is a potent inhibitor of TEM-1 beta-lactamase, the wild-type sequence of the active site binding region is not optimal and that derivatives of BLIP that bind beta-lactamase extremely tightly can be obtained. Importantly, all of the tight binding BLIP mutants have sequences that would be predicted theoretically to form turn structures.     

Probing active site chemistry in SHV beta-lactamase variants at Ambler position 244. Understanding unique properties of inhibitor resistance

Inhibitor-resistant class A beta-lactamases are an emerging threat to the use of beta-lactam/beta-lactamase inhibitor combinations (e.g. amoxicillin/clavulanate) in the treatment of serious bacterial infections. In the TEM family of Class A beta-lactamases, single amino acid substitutions at Arg-244 confer resistance to clavulanate inactivation. To understand the amino acid sequence requirements in class A beta-lactamases that confer resistance to clavulanate, we performed site-saturation mutagenesis of Arg-244 in SHV-1, a related class A beta-lactamase found in Klebsiella pneumoniae. Twelve SHV enzymes with amino acid substitutions at Arg-244 resulted in significant increases in minimal inhibitory concentrations to ampicillin/clavulanate when expressed in Escherichia coli. Kinetic analyses of SHV-1, R244S, R244Q, R244L, and R244E beta-lactamases revealed that the main determinant of clavulanate resistance was reduced inhibitor affinity. In contrast to studies in the highly similar TEM enzyme, we observed increases in clavulanate k(inact) for all mutants. Electrospray ionization mass spectrometry of clavulanate inhibited SHV-1 and R244S showed nearly identical mass adducts, arguing against a difference in the inactivation mechanism. Testing a wide range of substrates with C3-4 carboxylates in different stereochemical orientations, we observed impaired affinity for all substrates among inhibitor resistant variants. Lastly, we synthesized two boronic acid transition state analogs that mimic cephalothin and found substitutions at Arg-244 markedly affect both the affinity and kinetics of binding to the chiral, deacylation transition state inhibitor. These data define a role for Arg-244 in substrate and inhibitor binding in the SHV beta-lactamase.     

Structure-based discovery of a novel,noncovalent inhibitor of AmpC beta-lactamase

beta-lactamases are the most widespread resistance mechanisms to beta-lactam antibiotics, and there is a pressing need for novel, non-beta-lactam drugs. A database of over 200,000 compounds was docked to the active site of AmpC beta-lactamase to identify potential inhibitors. Fifty-six compounds were tested, and three had K(i) values of 650 microM or better. The best of these, 3-[(4-chloroanilino)sulfonyl]thiophene-2-carboxylic acid, was a competitive noncovalent inhibitor (K(i) = 26 microM), which also reversed resistance to beta-lactams in bacteria expressing AmpC. The structure of AmpC in complex with this compound was determined by X-ray crystallography to 1.94 A and reveals that the inhibitor interacts with key active-site residues in sites targeted in the docking calculation. Indeed, the experimentally determined conformation of the inhibitor closely resembles the prediction. The structure of the enzyme-inhibitor complex presents an opportunity to improve binding affinity in a novel series of inhibitors discovered by structure-based methods.     

The high resolution crystal structure for class A beta-lactamase PER-1 reveals the bases for its increase in breadth of activity

The treatment of infectious diseases by beta-lactam antibiotics is continuously challenged by the emergence and dissemination of new beta-lactamases. In most cases, the cephalosporinase activity of class A enzymes results from a few mutations in the TEM and SHV penicillinases. The PER-1 beta-lactamase was characterized as a class A enzyme displaying a cephalosporinase activity. This activity was, however, insensitive to the mutations of residues known to be critical for providing extended substrate profiles to TEM and SHV. The x-ray structure of the protein, solved at 1.9-A resolution, reveals that two of the most conserved features in class A beta-lactamases are not present in this enzyme: the fold of the Omega-loop and the cis conformation of the peptide bond between residues 166 and 167. The new fold of the Omega-loop and the insertion of four residues at the edge of strand S3 generate a broad cavity that may easily accommodate the bulky substituents of cephalosporin substrates. The trans conformation of the 166-167 bond is related to the presence of an aspartic acid at position 136. Selection of class A enzymes based on the occurrence of both Asp(136) and Asn(179) identifies a subgroup of enzymes with high sequence homology.     

Inhibition of class D beta-lactamases by diaroyl phosphates

The production of beta-lactamases is an important component of bacterial resistance to beta-lactam antibiotics. These enzymes catalyze the hydrolytic destruction of beta-lactams. The class D serine beta-lactamases have, in recent years, been expanding in sequence space and substrate spectrum under the challenge of currently dispensed beta-lactams. Further, the beta-lactamase inhibitors now employed in medicine are not generally effective against class D enzymes. In this paper, we show that diaroyl phosphates are very effective inhibitory substrates of these enzymes. Reaction of the OXA-1 beta-lactamase, a typical class D enzyme, with diaroyl phosphates involves acylation of the active site with departure of an aroyl phosphate leaving group. The interaction of the latter with polar active-site residues is most likely responsible for the general reactivity of these molecules with the enzyme. The rate of acylation of the OXA-1 beta-lactamase by diaroyl phosphates is not greatly affected by the electronic effects of substituents, probably because of compensation phenomena, but is greatly enhanced by hydrophobic substituents; the second-order rate constant for acylation of the OXA-1 beta-lactamase by bis(4-phenylbenzoyl) phosphate, for example, is 1.1 x 10(7) s(-)(1) M(-)(1). This acylation reactivity correlates with the hydrophobic nature of the beta-lactam side-chain binding site of class D beta-lactamases. Deacylation of the enzyme is slow, e.g., 1.24 x 10(-)(3) s(-)(1) for the above-mentioned phosphate and directly influenced by the electronic effects of substituents. The effective steady-state inhibition constants, K(i), are nanomolar, e.g., 0.11 nM for the above-mentioned phosphate. The diaroyl phosphates, which have now been shown to be inhibitory substrates of all serine beta-lactamases, represent an intriguing new platform for the design of beta-lactamase inhibitors.     

Enzyme-induced strain/distortion in the ground-state ES complex in beta-lactamase catalysis revealed by FTIR

Class A beta-lactamases hydrolyze penicillins and other beta-lactams via an acyl-enzyme catalytic mechanism. Ser70 is the active site nucleophile. By constructing the S70A mutant, which is unable to form the acyl-enzyme intermediate, it was possible to make stable ES complexes with various substrates. The stability of such Michaelis complexes permitted acquisition of their infrared spectra. Comparison of the beta-lactam carbonyl stretch frequency (nu(CO)) in the free and enzyme-bound substrate revealed an average decrease of 13 cm(-)(1), indicating substantial strain/distortion of the lactam carbonyl when bound in the ES complex. Interestingly, regardless of the frequency of the C=O stretch in the free substrate, when complexed to Bacillus licheniformis beta-lactamase, the frequency was always 1755 +/- 2 cm(-)(1). This suggests the active site environment induces a similar conformation of the beta-lactam in all substrates when bound to the enzyme. Using deuterium substitution, it was shown that the "oxyanion hole", which involves hydrogen bonding to two backbone amides, is the major source of the enzyme-induced strain/distortion. The very weak catalytic activity of the S70A beta-lactamase suggests enzyme-facilitated hydrolysis due to substrate distortion on binding to the enzyme. Thus the binding of the substrate in the active site induces substantial strain and distortion that contribute significantly to the overall rate enhancement in beta-lactamase catalysis.     

Structure-based optimization of cephalothin-analogue boronic acids as beta-lactamase inhibitors

Boronic acids have proved to be promising selective inhibitors of beta-lactamases, acting as transition state analogues. Starting from a previously described nanomolar inhibitor of AmpC beta-lactamase, three new inhibitors were designed to gain interactions with highly conserved residues, such as Asn343, and to bind more tightly to the enzyme. Among these, one was obtained by stereoselective synthesis and succeeded in placing its anionic group into the carboxylate binding site of the enzyme, as revealed by X-ray crystallography of the complex inhibitor/AmpC. Nevertheless, it failed at improving affinity, when compared to the lead from which it was derived. The origins of this structural and energetic discrepancy are discussed.     

The complexed structure and antimicrobial activity of a non-beta-lactam inhibitor of AmpC beta-lactamase

Beta-lactamases are the major resistance mechanism to beta-lactam antibiotics and pose a growing threat to public health. Recently, bacteria have become resistant to beta-lactamase inhibitors, making this problem pressing. In an effort to overcome this resistance, non-beta-lactam inhibitors of beta-lactamases were investigated for complementarity to the structure of AmpC beta-lactamase from Escherichia coli. This led to the discovery of an inhibitor, benzo(b)thiophene-2-boronic acid (BZBTH2B), which inhibited AmpC with a Ki of 27 nM. This inhibitor is chemically dissimilar to beta-lactams, raising the question of what specific interactions are responsible for its activity. To answer this question, the X-ray crystallographic structure of BZBTH2B in complex with AmpC was determined to 2.25 A resolution. The structure reveals several unexpected interactions. The inhibitor appears to complement the conserved, R1-amide binding region of AmpC, despite lacking an amide group. Interactions between one of the boronic acid oxygen atoms, Tyr150, and an ordered water molecule suggest a mechanism for acid/base catalysis and a direction for hydrolytic attack in the enzyme catalyzed reaction. To investigate how a non-beta-lactam inhibitor would perform against resistant bacteria, BZBTH2B was tested in antimicrobial assays. BZBTH2B significantly potentiated the activity of a third-generation cephalosporin against AmpC-producing resistant bacteria. This inhibitor was unaffected by two common resistance mechanisms that often arise against beta-lactams in conjunction with beta-lactamases. Porin channel mutations did not decrease the efficacy of BZBTH2B against cells expressing AmpC. Also, this inhibitor did not induce expression of AmpC, a problem with many beta-lactams. The structure of the BZBTH2B/AmpC complex provides a starting point for the structure-based elaboration of this class of non-beta-lactam inhibitors.     

Crystal structure of a deacylation-defective mutant of penicillin-binding protein 5 at 2.3-A resolution

Penicillin-binding protein 5 (PBP 5) of Escherichia coli functions as a d-alanine carboxypeptidase, cleaving the C-terminal d-alanine residue from cell wall peptides. Like all PBPs, PBP 5 forms a covalent acyl-enzyme complex with beta-lactam antibiotics; however, PBP 5 is distinguished by its high rate of deacylation of the acyl-enzyme complex (t(12) approximately 9 min). A Gly-105 --> Asp mutation in PBP 5 markedly impairs this beta-lactamase activity (deacylation), with only minor effects on acylation, and promotes accumulation of a covalent complex with peptide substrates. To gain further insight into the catalytic mechanism of PBP 5, we determined the three-dimensional structure of the G105D mutant form of soluble PBP 5 (termed sPBP 5') at 2.3 A resolution. The structure is composed of two domains, a penicillin binding domain with a striking similarity to Class A beta-lactamases (TEM-1-like) and a domain of unknown function. In addition, the penicillin-binding domain contains an active site loop spatially equivalent to the Omega loop of beta-lactamases. In beta-lactamases, the Omega loop contains two amino acids involved in catalyzing deacylation. This similarity may explain the high beta-lactamase activity of wild-type PBP 5. Because of the low rate of deacylation of the G105D mutant, visualization of peptide substrates bound to the active site may be possible.     

Conformational changes induced by cloxacillin in class a beta-lactamase from Bacillus cereus.

Class A beta-lactamases are enzymes that hydrolyse beta-lactam antibiotics such as penicillins and cephalosporins. They also hydrolyse substrate analogues such as oxacillin and cloxacillin, with a biphasic kinetic as it has been reported for Bacillus cereus beta-lactamase. A molecular model of Bacillus cereus beta-lactamase was built and the conformational changes that the substrates benzylpenicillin and cloxacilline produced in the conformation of selected regions of the protein were analyzed. This study was performed using the docking of the substrates, their tetrahedral intermediates and the corresponding acids on the active site, followed by molecular dynamic and subsequent optimisation procedures. The most important changes were produced on Tyr105 and Tyr273, when the tetrahedral intermediate of cloxacillin was docked at the active site, these amino acids are partially responsible for the stabilisation of the substrates at the active site. These changes may explain the kinetic differences observed during the hydrolysis of substrates type S and type A by beta-lactamases class A.     

Structural basis for the extended substrate spectrum of CMY-10, a plasmid-encoded class C beta-lactamase

The emergence and dissemination of extended-spectrum (ES) beta-lactamases induce therapeutic failure and a lack of eradication of clinical isolates even by third-generation beta-lactam antibiotics like ceftazidime. CMY-10 is a plasmid-encoded class C beta-lactamase with a wide spectrum of substrates. Unlike the well-studied class C ES beta-lactamase from Enterobacter cloacae GC1, the Omega-loop does not affect the active site conformation and the catalytic activity of CMY-10. Instead, a three-amino-acid deletion in the R2-loop appears to be responsible for the ES activity of CMY-10. According to the crystal structure solved at 1.55 A resolution, the deletion significantly widens the R2 active site, which accommodates the R2 side-chains of beta-lactam antibiotics. This observation led us to demonstrate the hydrolysing activity of CMY-10 towards imipenem with a long R2 substituent. The forced mutational analyses of P99 beta-lactamase reveal that the introduction of deletion mutations into the R2-loop is able to extend the substrate spectrum of class C non-ES beta-lactamases, which is compatible with the isolation of natural class C ES enzymes harbouring deletion mutations in the R2-loop. Consequently, the opening of the R2 active site by the deletion of some residues in the R2-loop can be considered as an operative molecular strategy of class C beta-lactamases to extend their substrate spectrum.     

Characterization of the active-site residues asparagine 167 and lysine 161 of the IMP-1 metallo beta-lactamase

The roles of lysine at position 161 and asparagine at position 167 in IMP-1 metallo beta-lactamase were studied by site-directed mutagenesis. These residues are highly conserved in metallo beta-lactamases and are thought to be present in the active-site cavity. Mutant enzymes with alanine or aspartic acid at position 167 showed almost the same properties as the wild-type enzyme. Kinetic parameters for the mutant enzymes differing at position 161 indicated that the positive charge of lysine 161 is required for electrostatic interaction with the carboxyl moiety of the substrate, i.e. C-3 of penicillins or C-4 of cephalosporins.     

Selection of beta-lactamases and penicillin binding mutants from a library of phage displayed TEM-1 beta-lactamase randomly mutated in the active site omega-loop

A combinatorial library of mutants of the phage displayed TEM-1 lactamase was generated in the region encompassing residues 163 to 171 of the active site Omega-loop. Two in vitro selection protocols were designed to extract from the library phage-enzymes characterised by a fast acylation by benzyl-penicillin (PenG) to yield either stable or very unstable acyl-enzymes. The critical step of the selections was the kinetically controlled labelling of the phages by reaction with either a biotinylated penicillin derivative or a biotinylated penicillin sulfone, i.e. a beta-lactamase suicide substrate; the biotinylated phages were recovered by panning on immobilised streptavidin. As labelling with biotinylated suicide substrates tends to select enzymes that do not turnover, a counter-selection against penicillin binding mutants was introduced to extract the beta-lactamases. The selected phage-enzymes were characterised by sequencing to identify conserved residues and by kinetic analysis of the reaction with benzyl-penicillin. Several penicillin binding mutants, in which the essential Glu166 is replaced by Asn, were shown to be acylated very fast by PenG, the acylation being characterised by biphasic kinetics. These data are interpreted by a kinetic scheme in which the enzymes exist in two interconvertible conformations. The rate constant of the conformational change suggests that it involves an isomerisation of the peptide bond between residues 166 and 167 and controls a conformation of the Omega-loop compatible with fast acylation of the active site serine residue.     

Crystal structure of KPC-2: insights into carbapenemase activity in class A beta-lactamases

Beta-lactamases inactivate beta-lactam antibiotics and are a major cause of antibiotic resistance. The recent outbreaks of Klebsiella pneumoniae carbapenem resistant (KPC) infections mediated by KPC type beta-lactamases are creating a serious threat to our "last resort" antibiotics, the carbapenems. KPC beta-lactamases are serine carbapenemases and are a subclass of class A beta-lactamases that have evolved to efficiently hydrolyze carbapenems and cephamycins which contain substitutions at the alpha-position proximal to the carbonyl group that normally render these beta-lactams resistant to hydrolysis. To investigate the molecular basis of this carbapenemase activity, we have determined the structure of KPC-2 at 1.85 A resolution. The active site of KPC-2 reveals the presence of a bicine buffer molecule which interacts via its carboxyl group with conserved active site residues S130, K234, T235, and T237; these likely resemble the interactions the beta-lactam carboxyl moiety makes in the Michaelis-Menten complex. Comparison of the KPC-2 structure with non-carbapenemases and previously determined NMC-A and SME-1 carbapenemase structures shows several active site alterations that are unique among carbapenemases. An outward shift of the catalytic S70 residue renders the active sites of the carbapenemases more shallow, likely allowing easier access of the bulkier substrates. Further space for the alpha-substituents is potentially provided by shifts in N132 and N170 in addition to concerted movements in the postulated carboxyl binding pocket that might allow the substrates to bind at a slightly different angle to accommodate these alpha-substituents. The structure of KPC-2 provides key insights into the carbapenemase activity of emerging class A beta-lactamases.     

Crystallographic mapping of beta-lactams bound to a D-alanyl-D-alanine peptidase target enzyme

X-ray crystallography has been used to examine the binding of three members of the beta-lactam family of antibiotics to the D-alanyl-D-alanine peptidase from Streptomyces R61, a target of penicillins. Cephalosporin C, the monobactam analog of penicillin G and (2,3)-alpha-methylene benzylpenicillin have been mapped at 2.3 A resolution in the form of acyl-enzyme complexes bound to serine 62. On the basis of the positions of these inhibitors, the binding of a tripeptide substrate for the enzyme, L-lysyl-D-alanyl-D-alanine, has been modeled in the active site. The binding of both inhibitors and substrate is facilitated by hydrogen-bonding interactions with a conserved beta-strand (297-303), which is antiparallel to the beta-lactam's acylamide linkage or the substrate's peptide bond. The active site is similar to that in beta-lactamases.     

Systematic mutagenesis of the active site omega loop of TEM-1 beta-lactamase.

Beta-Lactamase is a bacterial protein that provides resistance against beta-lactam antibiotics. TEM-1 beta-lactamase is the most prevalent plasmid-mediated beta-lactamase in gram-negative bacteria. Normally, this enzyme has high levels of hydrolytic activity for penicillins, but mutant beta-lactamases have evolved with activity toward a variety of beta-lactam antibiotics. It has been shown that active site substitutions are responsible for changes in the substrate specificity. Since mutant beta-lactamases pose a serious threat to antimicrobial therapy, the mechanisms by which mutations can alter the substrate specificity of TEM-1 beta-lactamase are of interest. Previously, screens of random libraries encompassing 31 of 55 active site amino acid positions enabled the identification of the residues responsible for maintaining the substrate specificity of TEM-1 beta-lactamase. In addition to substitutions found in clinical isolates, many other specificity-altering mutations were also identified. Interestingly, many nonspecific substitutions in the N-terminal half of the active site omega loop were found to increase ceftazidime hydrolytic activity and decrease ampicillin hydrolytic activity. To complete the active sight study, eight additional random libraries were constructed and screened for specificity-altering mutations. All additional substitutions found to alter the substrate specificity were located in the C-terminal half of the active site loop. These mutants, much like the N-terminal omega loop mutants, appear to be less stable than the wild-type enzyme. Further analysis of a 165-YYG-167 triple mutant, selected for high levels of ceftazidime hydrolytic activity, provides an example of the correlation which exists between enzyme instability and increased ceftazidime hydrolytic activity in the ceftazidime-selected omega loop mutants.